/*
* This file is part of the sigrok project.
*
- * ASIX Sigma Logic Analyzer Driver
- *
- * Copyright (C) 2010
- *
- * Håvard Espeland <gus@ping.uio.no>,
- * Martin Stensgård <mastensg@ping.uio.no>
- * Carl Henrik Lunde <chlunde@ping.uio.no>
+ * Copyright (C) 2010 Håvard Espeland <gus@ping.uio.no>,
+ * Copyright (C) 2010 Martin Stensgård <mastensg@ping.uio.no>
+ * Copyright (C) 2010 Carl Henrik Lunde <chlunde@ping.uio.no>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+/*
+ * ASIX Sigma Logic Analyzer Driver
+ */
+
#include <ftdi.h>
#include <string.h>
#include <zlib.h>
-
-#include "sigrok.h"
+#include <sigrok.h>
#include "asix-sigma.h"
#define USB_VENDOR 0xa600
#define USB_VENDOR_NAME "ASIX"
#define USB_MODEL_NAME "SIGMA"
#define USB_MODEL_VERSION ""
-#define FIRMWARE FIRMWARE_DIR "/asix-sigma-200.firmware"
+#define TRIGGER_TYPES "rf10"
static GSList *device_instances = NULL;
// XXX These should be per device
static struct ftdi_context ftdic;
-static uint64_t cur_samplerate = MHZ(200);
+static uint64_t cur_samplerate = 0;
static uint32_t limit_msec = 0;
static struct timeval start_tv;
+static int cur_firmware = -1;
+static int num_probes = 0;
+static int samples_per_event = 0;
+static int capture_ratio = 50;
+static struct sigma_trigger trigger;
+static struct sigma_state sigma;
static uint64_t supported_samplerates[] = {
+ KHZ(200),
+ KHZ(250),
+ KHZ(500),
+ MHZ(1),
+ MHZ(5),
+ MHZ(10),
+ MHZ(25),
+ MHZ(50),
+ MHZ(100),
MHZ(200),
0,
};
static struct samplerates samplerates = {
- MHZ(200),
+ KHZ(200),
MHZ(200),
0,
supported_samplerates,
static int capabilities[] = {
HWCAP_LOGIC_ANALYZER,
HWCAP_SAMPLERATE,
+ HWCAP_CAPTURE_RATIO,
+ HWCAP_PROBECONFIG,
- /* These are really implemented in the driver, not the hardware. */
HWCAP_LIMIT_MSEC,
0,
};
-static int sigma_read(void* buf, size_t size)
+/* Force the FPGA to reboot. */
+static uint8_t suicide[] = {
+ 0x84, 0x84, 0x88, 0x84, 0x88, 0x84, 0x88, 0x84,
+};
+
+/* Prepare to upload firmware (FPGA specific). */
+static uint8_t init[] = {
+ 0x03, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+};
+
+/* Initialize the logic analyzer mode. */
+static uint8_t logic_mode_start[] = {
+ 0x00, 0x40, 0x0f, 0x25, 0x35, 0x40,
+ 0x2a, 0x3a, 0x40, 0x03, 0x20, 0x38,
+};
+
+static const char *firmware_files[] = {
+ "asix-sigma-50.fw", /* 50 MHz, supports 8 bit fractions */
+ "asix-sigma-100.fw", /* 100 MHz */
+ "asix-sigma-200.fw", /* 200 MHz */
+ "asix-sigma-50sync.fw", /* Synchronous clock from pin */
+ "asix-sigma-phasor.fw", /* Frequency counter */
+};
+
+static void hw_stop_acquisition(int device_index, gpointer session_device_id);
+
+static int sigma_read(void *buf, size_t size)
{
int ret;
- ret = ftdi_read_data(&ftdic, (unsigned char*) buf, size);
+
+ ret = ftdi_read_data(&ftdic, (unsigned char *)buf, size);
if (ret < 0) {
g_warning("ftdi_read_data failed: %s",
- ftdi_get_error_string(&ftdic));
+ ftdi_get_error_string(&ftdic));
}
return ret;
}
-static int sigma_write(void* buf, size_t size)
+static int sigma_write(void *buf, size_t size)
{
int ret;
- ret = ftdi_write_data(&ftdic, (unsigned char*) buf, size);
+
+ ret = ftdi_write_data(&ftdic, (unsigned char *)buf, size);
if (ret < 0) {
g_warning("ftdi_write_data failed: %s",
- ftdi_get_error_string(&ftdic));
- }
- else if ((size_t) ret != size) {
+ ftdi_get_error_string(&ftdic));
+ } else if ((size_t) ret != size) {
g_warning("ftdi_write_data did not complete write\n");
}
buf[idx++] = REG_ADDR_LOW | (reg & 0xf);
buf[idx++] = REG_ADDR_HIGH | (reg >> 4);
- for (i=0; i<len; ++i) {
+ for (i = 0; i < len; ++i) {
buf[idx++] = REG_DATA_LOW | (data[i] & 0xf);
buf[idx++] = REG_DATA_HIGH_WRITE | (data[i] >> 4);
}
static int sigma_read_register(uint8_t reg, uint8_t *data, size_t len)
{
uint8_t buf[3];
+
buf[0] = REG_ADDR_LOW | (reg & 0xf);
buf[1] = REG_ADDR_HIGH | (reg >> 4);
-
buf[2] = REG_READ_ADDR;
sigma_write(buf, sizeof(buf));
static uint8_t sigma_get_register(uint8_t reg)
{
uint8_t value;
+
if (1 != sigma_read_register(reg, &value, 1)) {
g_warning("Sigma_get_register: 1 byte expected");
return 0;
REG_READ_ADDR | NEXT_REG,
REG_READ_ADDR | NEXT_REG,
};
-
uint8_t result[6];
sigma_write(buf, sizeof(buf));
*triggerpos = result[0] | (result[1] << 8) | (result[2] << 16);
*stoppos = result[3] | (result[4] << 8) | (result[5] << 16);
+ /* Not really sure why this must be done, but according to spec. */
+ if ((--*stoppos & 0x1ff) == 0x1ff)
+ stoppos -= 64;
+
+ if ((*--triggerpos & 0x1ff) == 0x1ff)
+ triggerpos -= 64;
+
return 1;
}
uint8_t buf[4096];
int idx = 0;
- /* Send the startchunk. Index start with 1 */
+ /* Send the startchunk. Index start with 1. */
buf[0] = startchunk >> 8;
buf[1] = startchunk & 0xff;
sigma_write_register(WRITE_MEMROW, buf, 2);
- /* Read the DRAM */
+ /* Read the DRAM. */
buf[idx++] = REG_DRAM_BLOCK;
buf[idx++] = REG_DRAM_WAIT_ACK;
for (i = 0; i < numchunks; ++i) {
- /* Alternate bit to copy from dram to cache */
- if (i != numchunks-1)
- buf[idx++] = REG_DRAM_BLOCK | (((i+1) % 2) << 4);
+ /* Alternate bit to copy from DRAM to cache. */
+ if (i != (numchunks - 1))
+ buf[idx++] = REG_DRAM_BLOCK | (((i + 1) % 2) << 4);
buf[idx++] = REG_DRAM_BLOCK_DATA | ((i % 2) << 4);
- if (i != numchunks-1)
+ if (i != (numchunks - 1))
buf[idx++] = REG_DRAM_WAIT_ACK;
}
return sigma_read(data, numchunks * CHUNK_SIZE);
}
+/* Upload trigger look-up tables to Sigma. */
+static int sigma_write_trigger_lut(struct triggerlut *lut)
+{
+ int i;
+ uint8_t tmp[2];
+ uint16_t bit;
+
+ /* Transpose the table and send to Sigma. */
+ for (i = 0; i < 16; ++i) {
+ bit = 1 << i;
+
+ tmp[0] = tmp[1] = 0;
+
+ if (lut->m2d[0] & bit)
+ tmp[0] |= 0x01;
+ if (lut->m2d[1] & bit)
+ tmp[0] |= 0x02;
+ if (lut->m2d[2] & bit)
+ tmp[0] |= 0x04;
+ if (lut->m2d[3] & bit)
+ tmp[0] |= 0x08;
+
+ if (lut->m3 & bit)
+ tmp[0] |= 0x10;
+ if (lut->m3s & bit)
+ tmp[0] |= 0x20;
+ if (lut->m4 & bit)
+ tmp[0] |= 0x40;
+
+ if (lut->m0d[0] & bit)
+ tmp[1] |= 0x01;
+ if (lut->m0d[1] & bit)
+ tmp[1] |= 0x02;
+ if (lut->m0d[2] & bit)
+ tmp[1] |= 0x04;
+ if (lut->m0d[3] & bit)
+ tmp[1] |= 0x08;
+
+ if (lut->m1d[0] & bit)
+ tmp[1] |= 0x10;
+ if (lut->m1d[1] & bit)
+ tmp[1] |= 0x20;
+ if (lut->m1d[2] & bit)
+ tmp[1] |= 0x40;
+ if (lut->m1d[3] & bit)
+ tmp[1] |= 0x80;
+
+ sigma_write_register(WRITE_TRIGGER_SELECT0, tmp, sizeof(tmp));
+ sigma_set_register(WRITE_TRIGGER_SELECT1, 0x30 | i);
+ }
+
+ /* Send the parameters */
+ sigma_write_register(WRITE_TRIGGER_SELECT0, (uint8_t *) &lut->params,
+ sizeof(lut->params));
+
+ return SIGROK_OK;
+}
-/* Generate the bitbang stream for programming the FPGA */
+/* Generate the bitbang stream for programming the FPGA. */
static int bin2bitbang(const char *filename,
- unsigned char **buf, size_t* buf_size)
+ unsigned char **buf, size_t *buf_size)
{
- FILE *f = fopen(filename, "r");
+ FILE *f;
long file_size;
unsigned long offset = 0;
unsigned char *p;
uLongf csize, fwsize;
const int buffer_size = 65536;
size_t i;
- int c, ret;
+ int c, ret, bit, v;
+ uint32_t imm = 0x3f6df2ab;
+ f = fopen(filename, "r");
if (!f) {
g_warning("fopen(\"%s\", \"r\")", filename);
return -1;
fseek(f, 0, SEEK_SET);
-
compressed_buf = g_malloc(file_size);
firmware = g_malloc(buffer_size);
return -1;
}
- uint32_t imm = 0x3f6df2ab;
csize = 0;
while ((c = getc(f)) != EOF) {
imm = (imm + 0xa853753) % 177 + (imm * 0x8034052);
*buf_size = fwsize * 2 * 8;
- *buf = p = (unsigned char*) g_malloc(*buf_size);
+ *buf = p = (unsigned char *)g_malloc(*buf_size);
if (!p) {
g_warning("Error allocating buffers");
}
for (i = 0; i < fwsize; ++i) {
- int bit;
for (bit = 7; bit >= 0; --bit) {
- int v = firmware[i] & 1 << bit ? 0x40 : 0x00;
+ v = firmware[i] & 1 << bit ? 0x40 : 0x00;
p[offset++] = v | 0x01;
p[offset++] = v;
}
if (offset != *buf_size) {
g_free(*buf);
g_warning("Error reading firmware %s "
- "offset=%ld, file_size=%ld, buf_size=%zd\n",
- filename, offset, file_size, *buf_size);
+ "offset=%ld, file_size=%ld, buf_size=%zd\n",
+ filename, offset, file_size, *buf_size);
return -1;
}
ftdi_init(&ftdic);
- /* Look for SIGMAs */
- if (ftdi_usb_open_desc(&ftdic, USB_VENDOR, USB_PRODUCT, USB_DESCRIPTION, NULL) < 0)
+ /* Look for SIGMAs. */
+ if (ftdi_usb_open_desc(&ftdic, USB_VENDOR, USB_PRODUCT,
+ USB_DESCRIPTION, NULL) < 0)
return 0;
- /* Register SIGMA device */
+ /* Register SIGMA device. */
sdi = sigrok_device_instance_new(0, ST_INITIALIZING,
USB_VENDOR_NAME, USB_MODEL_NAME, USB_MODEL_VERSION);
if (!sdi)
device_instances = g_slist_append(device_instances, sdi);
- /* We will open the device again when we need it */
+ /* We will open the device again when we need it. */
ftdi_usb_close(&ftdic);
return 1;
}
-
-static int hw_opendev(int device_index)
+static int upload_firmware(int firmware_idx)
{
int ret;
unsigned char *buf;
unsigned char pins;
size_t buf_size;
- struct sigrok_device_instance *sdi;
unsigned char result[32];
+ char firmware_path[128];
- /* Make sure it's an ASIX SIGMA */
+ /* Make sure it's an ASIX SIGMA. */
if ((ret = ftdi_usb_open_desc(&ftdic,
USB_VENDOR, USB_PRODUCT, USB_DESCRIPTION, NULL)) < 0) {
-
g_warning("ftdi_usb_open failed: %s",
- ftdi_get_error_string(&ftdic));
-
+ ftdi_get_error_string(&ftdic));
return 0;
}
if ((ret = ftdi_set_bitmode(&ftdic, 0xdf, BITMODE_BITBANG)) < 0) {
g_warning("ftdi_set_bitmode failed: %s",
- ftdi_get_error_string(&ftdic));
-
+ ftdi_get_error_string(&ftdic));
return 0;
}
- /* Four times the speed of sigmalogan - Works well */
+ /* Four times the speed of sigmalogan - Works well. */
if ((ret = ftdi_set_baudrate(&ftdic, 750000)) < 0) {
g_warning("ftdi_set_baudrate failed: %s",
- ftdi_get_error_string(&ftdic));
-
+ ftdi_get_error_string(&ftdic));
return 0;
}
- /* Force the FPGA to reboot */
- unsigned char suicide[] = {
- 0x84, 0x84, 0x88, 0x84, 0x88, 0x84, 0x88, 0x84,
- };
-
+ /* Force the FPGA to reboot. */
sigma_write(suicide, sizeof(suicide));
sigma_write(suicide, sizeof(suicide));
sigma_write(suicide, sizeof(suicide));
sigma_write(suicide, sizeof(suicide));
- /* Prepare to upload firmware (FPGA specific) */
- unsigned char init[] = {
- 0x03, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01
- };
-
+ /* Prepare to upload firmware (FPGA specific). */
sigma_write(init, sizeof(init));
ftdi_usb_purge_buffers(&ftdic);
- /* Wait until the FPGA asserts INIT_B */
+ /* Wait until the FPGA asserts INIT_B. */
while (1) {
ret = sigma_read(result, 1);
if (result[0] & 0x20)
break;
}
- /* Prepare firmware */
- if (-1 == bin2bitbang(FIRMWARE, &buf, &buf_size)) {
- g_warning("An error occured while reading the firmware: %s",
- FIRMWARE);
+ /* Prepare firmware. */
+ snprintf(firmware_path, sizeof(firmware_path), "%s/%s", FIRMWARE_DIR,
+ firmware_files[firmware_idx]);
+ if (-1 == bin2bitbang(firmware_path, &buf, &buf_size)) {
+ g_warning("An error occured while reading the firmware: %s",
+ firmware_path);
return SIGROK_ERR;
}
- /* Upload firmare */
+ /* Upload firmare. */
sigma_write(buf, buf_size);
g_free(buf);
if ((ret = ftdi_set_bitmode(&ftdic, 0x00, BITMODE_RESET)) < 0) {
g_warning("ftdi_set_bitmode failed: %s",
- ftdi_get_error_string(&ftdic));
-
+ ftdi_get_error_string(&ftdic));
return SIGROK_ERR;
}
ftdi_usb_purge_buffers(&ftdic);
- /* Discard garbage */
+ /* Discard garbage. */
while (1 == sigma_read(&pins, 1))
;
- /* Initialize the logic analyzer mode */
- unsigned char logic_mode_start[] = {
- 0x00, 0x40, 0x0f, 0x25, 0x35, 0x40,
- 0x2a, 0x3a, 0x40, 0x03, 0x20, 0x38
- };
-
+ /* Initialize the logic analyzer mode. */
sigma_write(logic_mode_start, sizeof(logic_mode_start));
- /* Expect a 3 byte reply */
+ /* Expect a 3 byte reply. */
ret = sigma_read(result, 3);
if (ret != 3 ||
result[0] != 0xa6 || result[1] != 0x55 || result[2] != 0xaa) {
-
- g_warning("Sigma configuration failed. Invalid reply received.");
+ g_warning("Configuration failed. Invalid reply received.");
return SIGROK_ERR;
}
- /* Works like a charm */
+ cur_firmware = firmware_idx;
+
+ return SIGROK_OK;
+}
+
+static int hw_opendev(int device_index)
+{
+ struct sigrok_device_instance *sdi;
+ int ret;
+
+ /* Make sure it's an ASIX SIGMA. */
+ if ((ret = ftdi_usb_open_desc(&ftdic,
+ USB_VENDOR, USB_PRODUCT, USB_DESCRIPTION, NULL)) < 0) {
+
+ g_warning("ftdi_usb_open failed: %s",
+ ftdi_get_error_string(&ftdic));
+
+ return 0;
+ }
if (!(sdi = get_sigrok_device_instance(device_instances, device_index)))
return SIGROK_ERR;
sdi->status = ST_ACTIVE;
+ return SIGROK_OK;
+}
+
+static int set_samplerate(struct sigrok_device_instance *sdi,
+ uint64_t samplerate)
+{
+ int i, ret;
+
+ sdi = sdi;
+
+ for (i = 0; supported_samplerates[i]; i++) {
+ if (supported_samplerates[i] == samplerate)
+ break;
+ }
+ if (supported_samplerates[i] == 0)
+ return SIGROK_ERR_SAMPLERATE;
+
+ if (samplerate <= MHZ(50)) {
+ ret = upload_firmware(0);
+ num_probes = 16;
+ }
+ if (samplerate == MHZ(100)) {
+ ret = upload_firmware(1);
+ num_probes = 8;
+ }
+ else if (samplerate == MHZ(200)) {
+ ret = upload_firmware(2);
+ num_probes = 4;
+ }
+
+ cur_samplerate = samplerate;
+ samples_per_event = 16 / num_probes;
+ sigma.state = SIGMA_IDLE;
+
g_message("Firmware uploaded");
- return SIGROK_OK;
+ return ret;
}
+/*
+ * In 100 and 200 MHz mode, only a single pin rising/falling can be
+ * set as trigger. In other modes, two rising/falling triggers can be set,
+ * in addition to value/mask trigger for any number of probes.
+ *
+ * The Sigma supports complex triggers using boolean expressions, but this
+ * has not been implemented yet.
+ */
+static int configure_probes(GSList *probes)
+{
+ struct probe *probe;
+ GSList *l;
+ int trigger_set = 0;
+ int probebit;
+
+ memset(&trigger, 0, sizeof(struct sigma_trigger));
+
+ for (l = probes; l; l = l->next) {
+ probe = (struct probe *)l->data;
+ probebit = 1 << (probe->index - 1);
+
+ if (!probe->enabled || !probe->trigger)
+ continue;
+
+ if (cur_samplerate >= MHZ(100)) {
+ /* Fast trigger support. */
+ if (trigger_set) {
+ g_warning("Asix Sigma only supports a single "
+ "pin trigger in 100 and 200 "
+ "MHz mode.");
+ return SIGROK_ERR;
+ }
+ if (probe->trigger[0] == 'f')
+ trigger.fallingmask |= probebit;
+ else if (probe->trigger[0] == 'r')
+ trigger.risingmask |= probebit;
+ else {
+ g_warning("Asix Sigma only supports "
+ "rising/falling trigger in 100 "
+ "and 200 MHz mode.");
+ return SIGROK_ERR;
+ }
+
+ ++trigger_set;
+ } else {
+ /* Simple trigger support (event). */
+ if (probe->trigger[0] == '1') {
+ trigger.simplevalue |= probebit;
+ trigger.simplemask |= probebit;
+ }
+ else if (probe->trigger[0] == '0') {
+ trigger.simplevalue &= ~probebit;
+ trigger.simplemask |= probebit;
+ }
+ else if (probe->trigger[0] == 'f') {
+ trigger.fallingmask |= probebit;
+ ++trigger_set;
+ }
+ else if (probe->trigger[0] == 'r') {
+ trigger.risingmask |= probebit;
+ ++trigger_set;
+ }
+
+ if (trigger_set > 2) {
+ g_warning("Asix Sigma only supports 2 rising/"
+ "falling triggers.");
+ return SIGROK_ERR;
+ }
+ }
+ }
+
+ return SIGROK_OK;
+}
static void hw_closedev(int device_index)
{
ftdi_usb_close(&ftdic);
}
-
static void hw_cleanup(void)
{
}
-
static void *hw_get_device_info(int device_index, int device_info_id)
{
struct sigrok_device_instance *sdi;
info = sdi;
break;
case DI_NUM_PROBES:
- info = GINT_TO_POINTER(4);
+ info = GINT_TO_POINTER(16);
break;
case DI_SAMPLERATES:
info = &samplerates;
break;
case DI_TRIGGER_TYPES:
- info = 0;//TRIGGER_TYPES;
+ info = (char *)TRIGGER_TYPES;
break;
case DI_CUR_SAMPLERATE:
info = &cur_samplerate;
return info;
}
-
static int hw_get_status(int device_index)
{
struct sigrok_device_instance *sdi;
return ST_NOT_FOUND;
}
-
static int *hw_get_capabilities(void)
{
return capabilities;
{
struct sigrok_device_instance *sdi;
int ret;
- uint64_t *tmp_u64;
if (!(sdi = get_sigrok_device_instance(device_instances, device_index)))
return SIGROK_ERR;
if (capability == HWCAP_SAMPLERATE) {
- tmp_u64 = (uint64_t*) value;
- /* Only 200 MHz implemented */
- ret = SIGROK_OK;
+ ret = set_samplerate(sdi, *(uint64_t*) value);
} else if (capability == HWCAP_PROBECONFIG) {
- ret = SIGROK_OK;
+ ret = configure_probes(value);
} else if (capability == HWCAP_LIMIT_MSEC) {
limit_msec = strtoull(value, NULL, 10);
ret = SIGROK_OK;
+ } else if (capability == HWCAP_CAPTURE_RATIO) {
+ capture_ratio = strtoull(value, NULL, 10);
+ ret = SIGROK_OK;
+ } else if (capability == HWCAP_PROBECONFIG) {
+ ret = configure_probes((GSList *) value);
} else {
ret = SIGROK_ERR;
}
return ret;
}
+/* Software trigger to determine exact trigger position. */
+static int get_trigger_offset(uint16_t *samples, uint16_t last_sample,
+ struct sigma_trigger *t)
+{
+ int i;
+
+ for (i = 0; i < 8; ++i) {
+ if (i > 0)
+ last_sample = samples[i-1];
+
+ /* Simple triggers. */
+ if ((samples[i] & t->simplemask) != t->simplevalue)
+ continue;
+
+ /* Rising edge. */
+ if ((last_sample & t->risingmask) != 0 || (samples[i] &
+ t->risingmask) != t->risingmask)
+ continue;
+
+ /* Falling edge. */
+ if ((last_sample & t->fallingmask) != t->fallingmask ||
+ (samples[i] & t->fallingmask) != 0)
+ continue;
+
+ break;
+ }
+
+ /* If we did not match, return original trigger pos. */
+ return i & 0x7;
+}
/*
- Decode chunk of 1024 bytes, 64 clusters, 7 events per cluster.
- Each event is 20ns apart, and can contain multiple samples.
- For 200 MHz, an event contains 4 samples for each channel, spread 5 ns apart
+ * Decode chunk of 1024 bytes, 64 clusters, 7 events per cluster.
+ * Each event is 20ns apart, and can contain multiple samples.
+ *
+ * For 200 MHz, events contain 4 samples for each channel, spread 5 ns apart.
+ * For 100 MHz, events contain 2 samples for each channel, spread 10 ns apart.
+ * For 50 MHz and below, events contain one sample for each channel,
+ * spread 20 ns apart.
*/
static int decode_chunk_ts(uint8_t *buf, uint16_t *lastts,
- uint8_t *lastsample, void *user_data)
+ uint16_t *lastsample, int triggerpos, void *user_data)
{
- const int samples_per_event = 4;
- uint16_t tsdiff;
- uint16_t ts;
-
- uint8_t samples[65536 * samples_per_event];
-
+ uint16_t tsdiff, ts;
+ uint16_t samples[65536 * samples_per_event];
struct datafeed_packet packet;
+ int i, j, k, l, numpad, tosend;
+ size_t n = 0, sent = 0;
+ int clustersize = EVENTS_PER_CLUSTER * samples_per_event;
+ uint16_t *event;
+ uint16_t cur_sample;
+ int triggerts = -1;
+
+ /* Check if trigger is in this chunk. */
+ if (triggerpos != -1) {
+ if (cur_samplerate <= MHZ(50))
+ triggerpos -= EVENTS_PER_CLUSTER - 1;
+
+ if (triggerpos < 0)
+ triggerpos = 0;
+
+ /* Find in which cluster the trigger occured. */
+ triggerts = triggerpos / 7;
+ }
- int i, j, k;
- size_t n = 0;
-
- int clustersize = EVENTS_PER_CLUSTER * samples_per_event; /* 4 for 200 MHz */
-
- /* For each ts */
+ /* For each ts. */
for (i = 0; i < 64; ++i) {
- ts = *(uint16_t*) &buf[i*16];
+ ts = *(uint16_t *) &buf[i * 16];
tsdiff = ts - *lastts;
*lastts = ts;
- /* Pad last sample up to current point */
- int numpad = tsdiff * samples_per_event - clustersize;
+ /* Pad last sample up to current point. */
+ numpad = tsdiff * samples_per_event - clustersize;
if (numpad > 0) {
- memset(samples, *lastsample,
- tsdiff*samples_per_event - clustersize);
- n = tsdiff*samples_per_event - clustersize;
+ for (j = 0; j < numpad; ++j)
+ samples[j] = *lastsample;
+
+ n = numpad;
}
- uint16_t *event = (uint16_t*) &buf[i*16+2];
+ /* Send samples between previous and this timestamp to sigrok. */
+ sent = 0;
+ while (sent < n) {
+ tosend = MIN(2048, n - sent);
+
+ packet.type = DF_LOGIC;
+ packet.length = tosend * sizeof(uint16_t);
+ packet.unitsize = 2;
+ packet.payload = samples + sent;
+ session_bus(user_data, &packet);
- /* For each sample in cluster */
+ sent += tosend;
+ }
+ n = 0;
+
+ event = (uint16_t *) &buf[i * 16 + 2];
+ cur_sample = 0;
+
+ /* For each event in cluster. */
for (j = 0; j < 7; ++j) {
+
+ /* For each sample in event. */
for (k = 0; k < samples_per_event; ++k) {
- /* Extract samples from bytestream.
- Samples are packed together in a short */
- samples[n++] =
- ((!!(event[j] & (1 << (k+0x0)))) << 0) |
- ((!!(event[j] & (1 << (k+0x4)))) << 1) |
- ((!!(event[j] & (1 << (k+0x8)))) << 2) |
- ((!!(event[j] & (1 << (k+0xc)))) << 3);
+ cur_sample = 0;
+
+ /* For each probe. */
+ for (l = 0; l < num_probes; ++l)
+ cur_sample |= (!!(event[j] & (1 << (l *
+ samples_per_event + k))))
+ << l;
+
+ samples[n++] = cur_sample;
}
}
- *lastsample = samples[n-1];
-
- /* Send to sigrok */
- size_t sent = 0;
- while (sent < n) {
- int tosend = MIN(4096, n-sent);
+ /* Send data up to trigger point (if triggered). */
+ sent = 0;
+ if (i == triggerts) {
+ /*
+ * Trigger is not always accurate to sample because of
+ * pipeline delay. However, it always triggers before
+ * the actual event. We therefore look at the next
+ * samples to pinpoint the exact position of the trigger.
+ */
+ tosend = get_trigger_offset(samples, *lastsample,
+ &trigger);
+
+ if (tosend > 0) {
+ packet.type = DF_LOGIC;
+ packet.length = tosend * sizeof(uint16_t);
+ packet.unitsize = 2;
+ packet.payload = samples;
+ session_bus(user_data, &packet);
+
+ sent += tosend;
+ }
- packet.type = DF_LOGIC8;
- packet.length = tosend;
- packet.payload = samples+sent;
+ packet.type = DF_TRIGGER;
+ packet.length = 0;
+ packet.payload = 0;
session_bus(user_data, &packet);
-
- sent += tosend;
}
+
+ /* Send rest of the chunk to sigrok. */
+ tosend = n - sent;
+
+ packet.type = DF_LOGIC;
+ packet.length = tosend * sizeof(uint16_t);
+ packet.unitsize = 2;
+ packet.payload = samples + sent;
+ session_bus(user_data, &packet);
+
+ *lastsample = samples[n - 1];
}
- return 0;
+ return SIGROK_OK;
}
static int receive_data(int fd, int revents, void *user_data)
{
struct datafeed_packet packet;
-
const int chunks_per_read = 32;
unsigned char buf[chunks_per_read * CHUNK_SIZE];
- int bufsz;
-
- uint32_t triggerpos, stoppos;
- int numchunks;
- struct timeval tv;
+ int bufsz, numchunks, i, newchunks;
uint32_t running_msec;
-
- uint16_t lastts = 0;
- uint8_t lastsample = 0;
- int curchunk, i;
+ struct timeval tv;
fd = fd;
revents = revents;
- /* Get the current position */
- sigma_read_pos(&stoppos, &triggerpos);
- numchunks = stoppos / 512;
+ numchunks = sigma.stoppos / 512;
+
+ if (sigma.state == SIGMA_IDLE)
+ return FALSE;
- /* Check if the has expired, or memory is full */
- gettimeofday(&tv, 0);
- running_msec = (tv.tv_sec - start_tv.tv_sec) * 1000 +
- (tv.tv_usec - start_tv.tv_usec) / 1000;
+ if (sigma.state == SIGMA_CAPTURE) {
+
+ /* Check if the timer has expired, or memory is full. */
+ gettimeofday(&tv, 0);
+ running_msec = (tv.tv_sec - start_tv.tv_sec) * 1000 +
+ (tv.tv_usec - start_tv.tv_usec) / 1000;
+
+ if (running_msec < limit_msec && numchunks < 32767)
+ return FALSE;
+
+ hw_stop_acquisition(-1, user_data);
- if (running_msec < limit_msec && numchunks < 32767)
return FALSE;
- /* Stop Acqusition */
- sigma_set_register(WRITE_MODE, 0x11);
+ } else if (sigma.state == SIGMA_DOWNLOAD) {
+ if (sigma.chunks_downloaded >= numchunks) {
+ /* End of samples. */
+ packet.type = DF_END;
+ packet.length = 0;
+ session_bus(user_data, &packet);
- /* Set SDRAM Read Enable */
- sigma_set_register(WRITE_MODE, 0x02);
+ sigma.state = SIGMA_IDLE;
- /* Get the current position */
- sigma_read_pos(&stoppos, &triggerpos);
+ return TRUE;
+ }
- /* Download sample data */
- for (curchunk = 0; curchunk < numchunks;) {
- int newchunks = MIN(chunks_per_read, numchunks - curchunk);
+ newchunks = MIN(chunks_per_read,
+ numchunks - sigma.chunks_downloaded);
g_message("Downloading sample data: %.0f %%",
- 100.0 * curchunk / numchunks);
+ 100.0 * sigma.chunks_downloaded / numchunks);
- bufsz = sigma_read_dram(curchunk, newchunks, buf);
+ bufsz = sigma_read_dram(sigma.chunks_downloaded,
+ newchunks, buf);
- /* Find first ts */
- if (curchunk == 0) {
- lastts = *(uint16_t*) buf - 1;
+ /* Find first ts. */
+ if (sigma.chunks_downloaded == 0) {
+ sigma.lastts = *(uint16_t *) buf - 1;
+ sigma.lastsample = 0;
}
- /* Decode chunks and send them to sigrok */
+ /* Decode chunks and send them to sigrok. */
for (i = 0; i < newchunks; ++i) {
- decode_chunk_ts(buf + (i * CHUNK_SIZE),
- &lastts, &lastsample, user_data);
+ if (sigma.chunks_downloaded + i == sigma.triggerchunk)
+ decode_chunk_ts(buf + (i * CHUNK_SIZE),
+ &sigma.lastts, &sigma.lastsample,
+ sigma.triggerpos & 0x1ff,
+ user_data);
+ else
+ decode_chunk_ts(buf + (i * CHUNK_SIZE),
+ &sigma.lastts, &sigma.lastsample,
+ -1, user_data);
}
- curchunk += newchunks;
+ sigma.chunks_downloaded += newchunks;
}
- /* End of data */
- packet.type = DF_END;
- packet.length = 0;
- session_bus(user_data, &packet);
-
return TRUE;
}
+/* Build a LUT entry used by the trigger functions. */
+static void build_lut_entry(uint16_t value, uint16_t mask, uint16_t *entry)
+{
+ int i, j, k, bit;
+
+ /* For each quad probe. */
+ for (i = 0; i < 4; ++i) {
+ entry[i] = 0xffff;
+
+ /* For each bit in LUT. */
+ for (j = 0; j < 16; ++j)
+
+ /* For each probe in quad. */
+ for (k = 0; k < 4; ++k) {
+ bit = 1 << (i * 4 + k);
+
+ /* Set bit in entry */
+ if ((mask & bit) &&
+ ((!(value & bit)) !=
+ (!(j & (1 << k)))))
+ entry[i] &= ~(1 << j);
+ }
+ }
+}
+
+/* Add a logical function to LUT mask. */
+static void add_trigger_function(enum triggerop oper, enum triggerfunc func,
+ int index, int neg, uint16_t *mask)
+{
+ int i, j;
+ int x[2][2], tmp, a, b, aset, bset, rset;
+
+ memset(x, 0, 4 * sizeof(int));
+
+ /* Trigger detect condition. */
+ switch (oper) {
+ case OP_LEVEL:
+ x[0][1] = 1;
+ x[1][1] = 1;
+ break;
+ case OP_NOT:
+ x[0][0] = 1;
+ x[1][0] = 1;
+ break;
+ case OP_RISE:
+ x[0][1] = 1;
+ break;
+ case OP_FALL:
+ x[1][0] = 1;
+ break;
+ case OP_RISEFALL:
+ x[0][1] = 1;
+ x[1][0] = 1;
+ break;
+ case OP_NOTRISE:
+ x[1][1] = 1;
+ x[0][0] = 1;
+ x[1][0] = 1;
+ break;
+ case OP_NOTFALL:
+ x[1][1] = 1;
+ x[0][0] = 1;
+ x[0][1] = 1;
+ break;
+ case OP_NOTRISEFALL:
+ x[1][1] = 1;
+ x[0][0] = 1;
+ break;
+ }
+
+ /* Transpose if neg is set. */
+ if (neg) {
+ for (i = 0; i < 2; ++i)
+ for (j = 0; j < 2; ++j) {
+ tmp = x[i][j];
+ x[i][j] = x[1-i][1-j];
+ x[1-i][1-j] = tmp;
+ }
+ }
+
+ /* Update mask with function. */
+ for (i = 0; i < 16; ++i) {
+ a = (i >> (2 * index + 0)) & 1;
+ b = (i >> (2 * index + 1)) & 1;
+
+ aset = (*mask >> i) & 1;
+ bset = x[b][a];
+
+ if (func == FUNC_AND || func == FUNC_NAND)
+ rset = aset & bset;
+ else if (func == FUNC_OR || func == FUNC_NOR)
+ rset = aset | bset;
+ else if (func == FUNC_XOR || func == FUNC_NXOR)
+ rset = aset ^ bset;
+
+ if (func == FUNC_NAND || func == FUNC_NOR || func == FUNC_NXOR)
+ rset = !rset;
+
+ *mask &= ~(1 << i);
+
+ if (rset)
+ *mask |= 1 << i;
+ }
+}
+
+/*
+ * Build trigger LUTs used by 50 MHz and lower sample rates for supporting
+ * simple pin change and state triggers. Only two transitions (rise/fall) can be
+ * set at any time, but a full mask and value can be set (0/1).
+ */
+static int build_basic_trigger(struct triggerlut *lut)
+{
+ int i,j;
+ uint16_t masks[2] = { 0, 0 };
+
+ memset(lut, 0, sizeof(struct triggerlut));
+
+ /* Contant for simple triggers. */
+ lut->m4 = 0xa000;
+
+ /* Value/mask trigger support. */
+ build_lut_entry(trigger.simplevalue, trigger.simplemask, lut->m2d);
+
+ /* Rise/fall trigger support. */
+ for (i = 0, j = 0; i < 16; ++i) {
+ if (trigger.risingmask & (1 << i) ||
+ trigger.fallingmask & (1 << i))
+ masks[j++] = 1 << i;
+ }
+
+ build_lut_entry(masks[0], masks[0], lut->m0d);
+ build_lut_entry(masks[1], masks[1], lut->m1d);
+
+ /* Add glue logic */
+ if (masks[0] || masks[1]) {
+ /* Transition trigger. */
+ if (masks[0] & trigger.risingmask)
+ add_trigger_function(OP_RISE, FUNC_OR, 0, 0, &lut->m3);
+ if (masks[0] & trigger.fallingmask)
+ add_trigger_function(OP_FALL, FUNC_OR, 0, 0, &lut->m3);
+ if (masks[1] & trigger.risingmask)
+ add_trigger_function(OP_RISE, FUNC_OR, 1, 0, &lut->m3);
+ if (masks[1] & trigger.fallingmask)
+ add_trigger_function(OP_FALL, FUNC_OR, 1, 0, &lut->m3);
+ } else {
+ /* Only value/mask trigger. */
+ lut->m3 = 0xffff;
+ }
+
+ /* Triggertype: event. */
+ lut->params.selres = 3;
+
+ return SIGROK_OK;
+}
+
static int hw_start_acquisition(int device_index, gpointer session_device_id)
{
struct sigrok_device_instance *sdi;
struct datafeed_packet packet;
struct datafeed_header header;
+ struct clockselect_50 clockselect;
+ int frac;
+ uint8_t triggerselect;
+ struct triggerinout triggerinout_conf;
+ struct triggerlut lut;
+ int triggerpin;
session_device_id = session_device_id;
device_index = device_index;
- /* Setup trigger (by trigger-in) */
+ /* If the samplerate has not been set, default to 50 MHz. */
+ if (cur_firmware == -1)
+ set_samplerate(sdi, MHZ(50));
+
+ /* Enter trigger programming mode. */
sigma_set_register(WRITE_TRIGGER_SELECT1, 0x20);
- /* More trigger setup */
- uint8_t trigger_option[2] = { 0x38, 0x00 };
- sigma_write_register(WRITE_TRIGGER_OPTION,
- trigger_option, sizeof(trigger_option));
+ /* 100 and 200 MHz mode. */
+ if (cur_samplerate >= MHZ(100)) {
+ sigma_set_register(WRITE_TRIGGER_SELECT1, 0x81);
- /* Trigger normal (falling edge) */
- sigma_set_register(WRITE_TRIGGER_SELECT1, 0x08);
+ /* Find which pin to trigger on from mask. */
+ for (triggerpin = 0; triggerpin < 8; ++triggerpin)
+ if ((trigger.risingmask | trigger.fallingmask) &
+ (1 << triggerpin))
+ break;
- /* Enable pins (200 MHz, 4 pins) */
- sigma_set_register(WRITE_CLOCK_SELECT, 0xf0);
+ /* Set trigger pin and light LED on trigger. */
+ triggerselect = (1 << LEDSEL1) | (triggerpin & 0x7);
- /* Setup maximum post trigger time */
- sigma_set_register(WRITE_POST_TRIGGER, 0xff);
+ /* Default rising edge. */
+ if (trigger.fallingmask)
+ triggerselect |= 1 << 3;
- /* Start Acqusition (Software trigger start) */
- gettimeofday(&start_tv, 0);
- sigma_set_register(WRITE_MODE, 0x0d);
+ /* All other modes. */
+ } else if (cur_samplerate <= MHZ(50)) {
+ build_basic_trigger(&lut);
+ sigma_write_trigger_lut(&lut);
- /* Add capture source */
- source_add(0, G_IO_IN, 10, receive_data, session_device_id);
+ triggerselect = (1 << LEDSEL1) | (1 << LEDSEL0);
+ }
+
+ /* Setup trigger in and out pins to default values. */
+ memset(&triggerinout_conf, 0, sizeof(struct triggerinout));
+ triggerinout_conf.trgout_bytrigger = 1;
+ triggerinout_conf.trgout_enable = 1;
+
+ sigma_write_register(WRITE_TRIGGER_OPTION,
+ (uint8_t *) &triggerinout_conf,
+ sizeof(struct triggerinout));
+
+ /* Go back to normal mode. */
+ sigma_set_register(WRITE_TRIGGER_SELECT1, triggerselect);
+
+ /* Set clock select register. */
+ if (cur_samplerate == MHZ(200))
+ /* Enable 4 probes. */
+ sigma_set_register(WRITE_CLOCK_SELECT, 0xf0);
+ else if (cur_samplerate == MHZ(100))
+ /* Enable 8 probes. */
+ sigma_set_register(WRITE_CLOCK_SELECT, 0x00);
+ else {
+ /*
+ * 50 MHz mode (or fraction thereof). Any fraction down to
+ * 50 MHz / 256 can be used, but is not supported by sigrok API.
+ */
+ frac = MHZ(50) / cur_samplerate - 1;
+
+ clockselect.async = 0;
+ clockselect.fraction = frac;
+ clockselect.disabled_probes = 0;
+
+ sigma_write_register(WRITE_CLOCK_SELECT,
+ (uint8_t *) &clockselect,
+ sizeof(clockselect));
+ }
+
+ /* Setup maximum post trigger time. */
+ sigma_set_register(WRITE_POST_TRIGGER, (capture_ratio * 255) / 100);
- receive_data(0, 1, session_device_id);
+ /* Start acqusition. */
+ gettimeofday(&start_tv, 0);
+ sigma_set_register(WRITE_MODE, 0x0d);
/* Send header packet to the session bus. */
packet.type = DF_HEADER;
gettimeofday(&header.starttime, NULL);
header.samplerate = cur_samplerate;
header.protocol_id = PROTO_RAW;
- header.num_probes = 4;
+ header.num_logic_probes = num_probes;
+ header.num_analog_probes = 0;
session_bus(session_device_id, &packet);
+ /* Add capture source. */
+ source_add(0, G_IO_IN, 10, receive_data, session_device_id);
+
+ sigma.state = SIGMA_CAPTURE;
+
return SIGROK_OK;
}
-
static void hw_stop_acquisition(int device_index, gpointer session_device_id)
{
+ uint8_t modestatus;
+
device_index = device_index;
session_device_id = session_device_id;
- /* Stop Acqusition */
+ /* Stop acquisition. */
sigma_set_register(WRITE_MODE, 0x11);
- // XXX Set some state to indicate that data should be sent to sigrok
- // Now, we just wait for timeout
-}
+ /* Set SDRAM Read Enable. */
+ sigma_set_register(WRITE_MODE, 0x02);
+
+ /* Get the current position. */
+ sigma_read_pos(&sigma.stoppos, &sigma.triggerpos);
+ /* Check if trigger has fired. */
+ modestatus = sigma_get_register(READ_MODE);
+ if (modestatus & 0x20) {
+ sigma.triggerchunk = sigma.triggerpos / 512;
+ } else
+ sigma.triggerchunk = -1;
+
+ sigma.chunks_downloaded = 0;
+
+ sigma.state = SIGMA_DOWNLOAD;
+}
struct device_plugin asix_sigma_plugin_info = {
"asix-sigma",
1,
hw_init,
hw_cleanup,
-
hw_opendev,
hw_closedev,
hw_get_device_info,
hw_get_capabilities,
hw_set_configuration,
hw_start_acquisition,
- hw_stop_acquisition
+ hw_stop_acquisition,
};
-
-// vim:noexpandtab:ts=8 sts=8 sw=8
projects / libsigrok.git / blobdiff