##
## This file is part of the libsigrokdecode project.
##
-## Copyright (C) 2011-2015 Uwe Hermann <uwe@hermann-uwe.de>
+## Copyright (C) 2011-2016 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+## along with this program; if not, see <http://www.gnu.org/licenses/>.
##
import sigrokdecode as srd
from .lists import *
+L = len(cmds)
+
+# Don't forget to keep this in sync with 'cmds' is lists.py.
+class Ann:
+ WRSR, PP, READ, WRDI, RDSR, WREN, FAST_READ, SE, RDSCUR, WRSCUR, \
+ RDSR2, CE, ESRY, DSRY, REMS, RDID, RDP_RES, CP, ENSO, DP, READ2X, \
+ EXSO, CE2, BE, REMS2, \
+ BIT, FIELD, WARN = range(L + 3)
+
def cmd_annotation_classes():
return tuple([tuple([cmd[0].lower(), cmd[1]]) for cmd in cmds.values()])
inputs = ['spi']
outputs = ['spiflash']
annotations = cmd_annotation_classes() + (
- ('bits', 'Bits'),
- ('bits2', 'Bits2'),
- ('warnings', 'Warnings'),
+ ('bit', 'Bit'),
+ ('field', 'Field'),
+ ('warning', 'Warning'),
)
annotation_rows = (
- ('bits', 'Bits', (24, 25)),
- ('commands', 'Commands', tuple(range(23 + 1))),
- ('warnings', 'Warnings', (26,)),
+ ('bits', 'Bits', (L + 0,)),
+ ('fields', 'Fields', (L + 1,)),
+ ('commands', 'Commands', tuple(range(len(cmds)))),
+ ('warnings', 'Warnings', (L + 2,)),
)
options = (
{'id': 'chip', 'desc': 'Chip', 'default': tuple(chips.keys())[0],
# Simplification, most annotations span exactly one SPI byte/packet.
self.put(self.ss, self.es, self.out_ann, data)
- def putb(self, data):
- self.put(self.ss_block, self.es_block, self.out_ann, data)
+ def putf(self, data):
+ self.put(self.ss_field, self.es_field, self.out_ann, data)
+
+ def putc(self, data):
+ self.put(self.ss_cmd, self.es_cmd, self.out_ann, data)
+
+ def device(self):
+ return device_name[self.vendor].get(self.device_id, 'Unknown')
def vendor_device(self):
- dev = device_name[self.vendor].get(self.device_id, 'Unknown')
- return '%s %s' % (self.chip['vendor'], dev)
+ return '%s %s' % (self.chip['vendor'], self.device())
+
+ def cmd_ann_list(self):
+ x, s = cmds[self.state][0], cmds[self.state][1]
+ return ['Command: %s (%s)' % (s, x), 'Command: %s' % s,
+ 'Cmd: %s' % s, 'Cmd: %s' % x, x]
+
+ def cmd_vendor_dev_list(self):
+ c, d = cmds[self.state], 'Device = %s' % self.vendor_device()
+ return ['%s (%s): %s' % (c[1], c[0], d), '%s: %s' % (c[1], d),
+ '%s: %s' % (c[0], d), d, self.vendor_device()]
+
+ def emit_cmd_byte(self):
+ self.ss_cmd = self.ss
+ self.putx([Ann.FIELD, self.cmd_ann_list()])
+ self.addr = 0
+
+ def emit_addr_bytes(self, mosi):
+ self.addr |= (mosi << ((4 - self.cmdstate) * 8))
+ b = ((3 - (self.cmdstate - 2)) * 8) - 1
+ self.putx([Ann.BIT,
+ ['Address bits %d..%d: 0x%02x' % (b, b - 7, mosi),
+ 'Addr bits %d..%d: 0x%02x' % (b, b - 7, mosi),
+ 'Addr bits %d..%d' % (b, b - 7), 'A%d..A%d' % (b, b - 7)]])
+ if self.cmdstate == 2:
+ self.ss_field = self.ss
+ if self.cmdstate == 4:
+ self.es_field = self.es
+ self.putf([Ann.FIELD, ['Address: 0x%06x' % self.addr,
+ 'Addr: 0x%06x' % self.addr, '0x%06x' % self.addr]])
def handle_wren(self, mosi, miso):
- self.putx([0, ['Command: %s' % cmds[self.state][1]]])
+ self.putx([Ann.WREN, self.cmd_ann_list()])
self.state = None
def handle_wrdi(self, mosi, miso):
pass # TODO
- # TODO: Check/display device ID / name
def handle_rdid(self, mosi, miso):
if self.cmdstate == 1:
# Byte 1: Master sends command ID.
- self.ss_block = self.ss
- self.putx([2, ['Command: %s' % cmds[self.state][1]]])
+ self.emit_cmd_byte()
elif self.cmdstate == 2:
# Byte 2: Slave sends the JEDEC manufacturer ID.
- self.putx([2, ['Manufacturer ID: 0x%02x' % miso]])
+ self.putx([Ann.FIELD, ['Manufacturer ID: 0x%02x' % miso]])
elif self.cmdstate == 3:
- # Byte 3: Slave sends the memory type (0x20 for this chip).
- self.putx([2, ['Memory type: 0x%02x' % miso]])
+ # Byte 3: Slave sends the memory type.
+ self.putx([Ann.FIELD, ['Memory type: 0x%02x' % miso]])
elif self.cmdstate == 4:
# Byte 4: Slave sends the device ID.
self.device_id = miso
- self.putx([2, ['Device ID: 0x%02x' % miso]])
+ self.putx([Ann.FIELD, ['Device ID: 0x%02x' % miso]])
if self.cmdstate == 4:
- # TODO: Same device ID? Check!
- d = 'Device: %s' % self.vendor_device()
- self.put(self.ss_block, self.es, self.out_ann, [0, [d]])
+ self.es_cmd = self.es
+ self.putc([Ann.RDID, self.cmd_vendor_dev_list()])
self.state = None
else:
self.cmdstate += 1
# When done, the master de-asserts CS# again.
if self.cmdstate == 1:
# Byte 1: Master sends command ID.
- self.putx([3, ['Command: %s' % cmds[self.state][1]]])
+ self.emit_cmd_byte()
elif self.cmdstate >= 2:
# Bytes 2-x: Slave sends status register as long as master clocks.
- self.putx([24, ['Status register: 0x%02x' % miso]])
- self.putx([25, [decode_status_reg(miso)]])
+ self.es_cmd = self.es
+ self.putx([Ann.BIT, [decode_status_reg(miso)]])
+ self.putx([Ann.FIELD, ['Status register']])
+ self.putc([Ann.RDSR, self.cmd_ann_list()])
+ self.cmdstate += 1
+ def handle_rdsr2(self, mosi, miso):
+ # Read status register 2: Master asserts CS#, sends RDSR2 command,
+ # reads status register 2 byte. If CS# is kept asserted, the status
+ # register 2 can be read continuously / multiple times in a row.
+ # When done, the master de-asserts CS# again.
+ if self.cmdstate == 1:
+ # Byte 1: Master sends command ID.
+ self.emit_cmd_byte()
+ elif self.cmdstate >= 2:
+ # Bytes 2-x: Slave sends status register 2 as long as master clocks.
+ self.es_cmd = self.es
+ # TODO: Decode status register 2 correctly.
+ self.putx([Ann.BIT, [decode_status_reg(miso)]])
+ self.putx([Ann.FIELD, ['Status register 2']])
+ self.putc([Ann.RDSR2, self.cmd_ann_list()])
self.cmdstate += 1
def handle_wrsr(self, mosi, miso):
- pass # TODO
+ # Write status register: Master asserts CS#, sends WRSR command,
+ # writes 1 or 2 status register byte(s).
+ # When done, the master de-asserts CS# again. If this doesn't happen
+ # the WRSR command will not be executed.
+ if self.cmdstate == 1:
+ # Byte 1: Master sends command ID.
+ self.emit_cmd_byte()
+ elif self.cmdstate == 2:
+ # Byte 2: Master sends status register 1.
+ self.putx([Ann.BIT, [decode_status_reg(miso)]])
+ self.putx([Ann.FIELD, ['Status register 1']])
+ elif self.cmdstate == 3:
+ # Byte 3: Master sends status register 2.
+ # TODO: Decode status register 2 correctly.
+ self.putx([Ann.BIT, [decode_status_reg(miso)]])
+ self.putx([Ann.FIELD, ['Status register 2']])
+ self.es_cmd = self.es
+ self.putc([Ann.WRSR, self.cmd_ann_list()])
+ self.cmdstate += 1
def handle_read(self, mosi, miso):
# Read data bytes: Master asserts CS#, sends READ command, sends
# 3-byte address, reads >= 1 data bytes, de-asserts CS#.
if self.cmdstate == 1:
# Byte 1: Master sends command ID.
- self.putx([5, ['Command: %s' % cmds[self.state][1]]])
+ self.emit_cmd_byte()
elif self.cmdstate in (2, 3, 4):
# Bytes 2/3/4: Master sends read address (24bits, MSB-first).
- self.addr |= (mosi << ((4 - self.cmdstate) * 8))
- # self.putx([0, ['Read address, byte %d: 0x%02x' % \
- # (4 - self.cmdstate, mosi)]])
- if self.cmdstate == 4:
- self.putx([24, ['Read address: 0x%06x' % self.addr]])
- self.addr = 0
+ self.emit_addr_bytes(mosi)
elif self.cmdstate >= 5:
# Bytes 5-x: Master reads data bytes (until CS# de-asserted).
+ self.es_field = self.es # Will be overwritten for each byte.
if self.cmdstate == 5:
- self.ss_block = self.ss
- self.on_end_transaction = lambda: self.output_data_block('Read')
+ self.ss_field = self.ss
+ self.on_end_transaction = lambda: self.output_data_block('Data', Ann.READ)
self.data.append(miso)
-
self.cmdstate += 1
def handle_fast_read(self, mosi, miso):
# 3-byte address + 1 dummy byte, reads >= 1 data bytes, de-asserts CS#.
if self.cmdstate == 1:
# Byte 1: Master sends command ID.
- self.putx([5, ['Command: %s' % cmds[self.state][1]]])
+ self.emit_cmd_byte()
elif self.cmdstate in (2, 3, 4):
# Bytes 2/3/4: Master sends read address (24bits, MSB-first).
- self.putx([24, ['AD%d: 0x%02x' % (self.cmdstate - 1, mosi)]])
- if self.cmdstate == 2:
- self.ss_block = self.ss
- self.addr |= (mosi << ((4 - self.cmdstate) * 8))
+ self.emit_addr_bytes(mosi)
elif self.cmdstate == 5:
- self.putx([24, ['Dummy byte: 0x%02x' % mosi]])
- self.es_block = self.es
- self.putb([5, ['Read address: 0x%06x' % self.addr]])
- self.addr = 0
+ self.putx([Ann.BIT, ['Dummy byte: 0x%02x' % mosi]])
elif self.cmdstate >= 6:
# Bytes 6-x: Master reads data bytes (until CS# de-asserted).
+ self.es_field = self.es # Will be overwritten for each byte.
if self.cmdstate == 6:
- self.ss_block = self.ss
- self.on_end_transaction = lambda: self.output_data_block('Read')
+ self.ss_field = self.ss
+ self.on_end_transaction = lambda: self.output_data_block('Data', Ann.FAST_READ)
self.data.append(miso)
-
self.cmdstate += 1
def handle_2read(self, mosi, miso):
- # Fast read dual I/O: Same as fast read, but all data
- # after the command is sent via two I/O pins.
+ # 2x I/O read (fast read dual I/O): Master asserts CS#, sends 2READ
+ # command, sends 3-byte address + 1 dummy byte, reads >= 1 data bytes,
+ # de-asserts CS#. All data after the command is sent via two I/O pins.
# MOSI = SIO0 = even bits, MISO = SIO1 = odd bits.
- # Recombine the bytes and pass them up to the handle_fast_read command.
+ if self.cmdstate != 1:
+ b1, b2 = decode_dual_bytes(mosi, miso)
if self.cmdstate == 1:
# Byte 1: Master sends command ID.
- self.putx([5, ['Command: %s' % cmds[self.state][1]]])
- self.cmdstate = 2
- else:
- # Dual I/O mode.
- a, b = decode_dual_bytes(mosi, miso)
- # Pass same byte in as both MISO & MOSI, parser state determines
- # which one it cares about.
- self.handle_fast_read(a, a)
- self.handle_fast_read(b, b)
+ self.emit_cmd_byte()
+ elif self.cmdstate == 2:
+ # Bytes 2/3(/4): Master sends read address (24bits, MSB-first).
+ # Handle bytes 2 and 3 here.
+ self.emit_addr_bytes(b1)
+ self.cmdstate = 3
+ self.emit_addr_bytes(b2)
+ elif self.cmdstate == 4:
+ # Byte 5: Dummy byte. Also handle byte 4 (address LSB) here.
+ self.emit_addr_bytes(b1)
+ self.cmdstate = 5
+ self.putx([Ann.BIT, ['Dummy byte: 0x%02x' % b2]])
+ elif self.cmdstate >= 6:
+ # Bytes 6-x: Master reads data bytes (until CS# de-asserted).
+ self.es_field = self.es # Will be overwritten for each byte.
+ if self.cmdstate == 6:
+ self.ss_field = self.ss
+ self.on_end_transaction = lambda: self.output_data_block('Data', Ann.READ2X)
+ self.data.append(b1)
+ self.data.append(b2)
+ self.cmdstate += 1
# TODO: Warn/abort if we don't see the necessary amount of bytes.
# TODO: Warn if WREN was not seen before.
def handle_se(self, mosi, miso):
if self.cmdstate == 1:
# Byte 1: Master sends command ID.
- self.addr = 0
- self.ss_block = self.ss
- self.putx([8, ['Command: %s' % cmds[self.state][1]]])
+ self.emit_cmd_byte()
elif self.cmdstate in (2, 3, 4):
# Bytes 2/3/4: Master sends sector address (24bits, MSB-first).
- self.addr |= (mosi << ((4 - self.cmdstate) * 8))
- # self.putx([0, ['Sector address, byte %d: 0x%02x' % \
- # (4 - self.cmdstate, mosi)]])
+ self.emit_addr_bytes(mosi)
if self.cmdstate == 4:
+ self.es_cmd = self.es
d = 'Erase sector %d (0x%06x)' % (self.addr, self.addr)
- self.put(self.ss_block, self.es, self.out_ann, [24, [d]])
+ self.putc([Ann.SE, [d]])
# TODO: Max. size depends on chip, check that too if possible.
if self.addr % 4096 != 0:
# Sector addresses must be 4K-aligned (same for all 3 chips).
- d = 'Warning: Invalid sector address!'
- self.put(self.ss_block, self.es, self.out_ann, [101, [d]])
+ self.putc([Ann.WARN, ['Warning: Invalid sector address!']])
self.state = None
else:
self.cmdstate += 1
# page address, sends >= 1 data bytes, de-asserts CS#.
if self.cmdstate == 1:
# Byte 1: Master sends command ID.
- self.putx([12, ['Command: %s' % cmds[self.state][1]]])
+ self.emit_cmd_byte()
elif self.cmdstate in (2, 3, 4):
# Bytes 2/3/4: Master sends page address (24bits, MSB-first).
- self.addr |= (mosi << ((4 - self.cmdstate) * 8))
- # self.putx([0, ['Page address, byte %d: 0x%02x' % \
- # (4 - self.cmdstate, mosi)]])
- if self.cmdstate == 4:
- self.putx([24, ['Page address: 0x%06x' % self.addr]])
- self.addr = 0
+ self.emit_addr_bytes(mosi)
elif self.cmdstate >= 5:
# Bytes 5-x: Master sends data bytes (until CS# de-asserted).
+ self.es_field = self.es # Will be overwritten for each byte.
if self.cmdstate == 5:
- self.ss_block = self.ss
- self.on_end_transaction = lambda: self.output_data_block('Page data')
+ self.ss_field = self.ss
+ self.on_end_transaction = lambda: self.output_data_block('Data', Ann.PP)
self.data.append(mosi)
-
self.cmdstate += 1
def handle_cp(self, mosi, miso):
def handle_rdp_res(self, mosi, miso):
if self.cmdstate == 1:
# Byte 1: Master sends command ID.
- self.ss_block = self.ss
- self.putx([16, ['Command: %s' % cmds[self.state][1]]])
+ self.emit_cmd_byte()
elif self.cmdstate in (2, 3, 4):
# Bytes 2/3/4: Master sends three dummy bytes.
- self.putx([24, ['Dummy byte: %02x' % mosi]])
+ self.putx([Ann.FIELD, ['Dummy byte: %02x' % mosi]])
elif self.cmdstate == 5:
# Byte 5: Slave sends device ID.
+ self.es_cmd = self.es
self.device_id = miso
- self.putx([24, ['Device: %s' % self.vendor_device()]])
+ self.putx([Ann.FIELD, ['Device ID: %s' % self.device()]])
+ d = 'Device = %s' % self.vendor_device()
+ self.putc([Ann.RDP_RES, self.cmd_vendor_dev_list()])
self.state = None
-
self.cmdstate += 1
def handle_rems(self, mosi, miso):
if self.cmdstate == 1:
# Byte 1: Master sends command ID.
- self.ss_block = self.ss
- self.putx([16, ['Command: %s' % cmds[self.state][1]]])
+ self.emit_cmd_byte()
elif self.cmdstate in (2, 3):
# Bytes 2/3: Master sends two dummy bytes.
- # TODO: Check dummy bytes? Check reply from device?
- self.putx([24, ['Dummy byte: %s' % mosi]])
+ self.putx([Ann.FIELD, ['Dummy byte: 0x%02x' % mosi]])
elif self.cmdstate == 4:
# Byte 4: Master sends 0x00 or 0x01.
# 0x00: Master wants manufacturer ID as first reply byte.
# 0x01: Master wants device ID as first reply byte.
self.manufacturer_id_first = True if (mosi == 0x00) else False
d = 'manufacturer' if (mosi == 0x00) else 'device'
- self.putx([24, ['Master wants %s ID first' % d]])
+ self.putx([Ann.FIELD, ['Master wants %s ID first' % d]])
elif self.cmdstate == 5:
# Byte 5: Slave sends manufacturer ID (or device ID).
self.ids = [miso]
d = 'Manufacturer' if self.manufacturer_id_first else 'Device'
- self.putx([24, ['%s ID' % d]])
+ self.putx([Ann.FIELD, ['%s ID: 0x%02x' % (d, miso)]])
elif self.cmdstate == 6:
# Byte 6: Slave sends device ID (or manufacturer ID).
self.ids.append(miso)
- d = 'Manufacturer' if self.manufacturer_id_first else 'Device'
- self.putx([24, ['%s ID' % d]])
+ d = 'Device' if self.manufacturer_id_first else 'Manufacturer'
+ self.putx([Ann.FIELD, ['%s ID: 0x%02x' % (d, miso)]])
if self.cmdstate == 6:
id = self.ids[1] if self.manufacturer_id_first else self.ids[0]
self.device_id = id
- self.putx([24, ['Device: %s' % self.vendor_device()]])
+ self.es_cmd = self.es
+ self.putc([Ann.REMS, self.cmd_vendor_dev_list()])
self.state = None
else:
self.cmdstate += 1
def handle_dsry(self, mosi, miso):
pass # TODO
- def output_data_block(self, label):
+ def output_data_block(self, label, idx):
# Print accumulated block of data
# (called on CS# de-assert via self.on_end_transaction callback).
- self.es_block = self.es # Ends on the CS# de-assert sample.
+ self.es_cmd = self.es # End on the CS# de-assert sample.
if self.options['format'] == 'hex':
s = ' '.join([('%02x' % b) for b in self.data])
else:
s = ''.join(map(chr, self.data))
- self.putb([25, ['%s %d bytes: %s' % (label, len(self.data), s)]])
+ self.putf([Ann.FIELD, ['%s (%d bytes)' % (label, len(self.data))]])
+ self.putc([idx, ['%s (addr 0x%06x, %d bytes): %s' % \
+ (cmds[self.state][1], self.addr, len(self.data), s)]])
def decode(self, ss, es, data):
ptype, mosi, miso = data
try:
self.cmd_handlers[self.state](mosi, miso)
except KeyError:
- self.putx([24, ['Unknown command: 0x%02x' % mosi]])
+ self.putx([Ann.BIT, ['Unknown command: 0x%02x' % mosi]])
self.state = None