##
## This file is part of the libsigrokdecode project.
##
-## Copyright (C) 2011-2015 Uwe Hermann <uwe@hermann-uwe.de>
+## Copyright (C) 2011-2016 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+## along with this program; if not, see <http://www.gnu.org/licenses/>.
##
import sigrokdecode as srd
+from .lists import *
-# Dict which maps command IDs to their names and descriptions.
-cmds = {
- 0x06: ('WREN', 'Write enable'),
- 0x04: ('WRDI', 'Write disable'),
- 0x9f: ('RDID', 'Read identification'),
- 0x05: ('RDSR', 'Read status register'),
- 0x01: ('WRSR', 'Write status register'),
- 0x03: ('READ', 'Read data'),
- 0x0b: ('FAST/READ', 'Fast read data'),
- 0xbb: ('2READ', '2x I/O read'),
- 0x20: ('SE', 'Sector erase'),
- 0xd8: ('BE', 'Block erase'),
- 0x60: ('CE', 'Chip erase'),
- 0xc7: ('CE2', 'Chip erase'), # Alternative command ID
- 0x02: ('PP', 'Page program'),
- 0xad: ('CP', 'Continuously program mode'),
- 0xb9: ('DP', 'Deep power down'),
- 0xab: ('RDP/RES', 'Release from deep powerdown / Read electronic ID'),
- 0x90: ('REMS', 'Read electronic manufacturer & device ID'),
- 0xef: ('REMS2', 'Read ID for 2x I/O mode'),
- 0xb1: ('ENSO', 'Enter secured OTP'),
- 0xc1: ('EXSO', 'Exit secured OTP'),
- 0x2b: ('RDSCUR', 'Read security register'),
- 0x2f: ('WRSCUR', 'Write security register'),
- 0x70: ('ESRY', 'Enable SO to output RY/BY#'),
- 0x80: ('DSRY', 'Disable SO to output RY/BY#'),
-}
-
-device_name = {
- 0x14: 'MX25L1605D',
- 0x15: 'MX25L3205D',
- 0x16: 'MX25L6405D',
-}
+L = len(cmds)
+
+# Don't forget to keep this in sync with 'cmds' is lists.py.
+class Ann:
+ WRSR, PP, READ, WRDI, RDSR, WREN, FAST_READ, SE, RDSCUR, WRSCUR, \
+ RDSR2, CE, ESRY, DSRY, WRITE1, WRITE2, REMS, RDID, RDP_RES, CP, ENSO, DP, \
+ READ2X, EXSO, CE2, STATUS, BE, REMS2, \
+ BIT, FIELD, WARN = range(L + 3)
def cmd_annotation_classes():
return tuple([tuple([cmd[0].lower(), cmd[1]]) for cmd in cmds.values()])
+def decode_dual_bytes(sio0, sio1):
+ # Given a byte in SIO0 (MOSI) of even bits and a byte in
+ # SIO1 (MISO) of odd bits, return a tuple of two bytes.
+ def combine_byte(even, odd):
+ result = 0
+ for bit in range(4):
+ if even & (1 << bit):
+ result |= 1 << (bit*2)
+ if odd & (1 << bit):
+ result |= 1 << ((bit*2) + 1)
+ return result
+ return (combine_byte(sio0 >> 4, sio1 >> 4), combine_byte(sio0, sio1))
+
def decode_status_reg(data):
# TODO: Additional per-bit(s) self.put() calls with correct start/end.
return ret
class Decoder(srd.Decoder):
- api_version = 2
+ api_version = 3
id = 'spiflash'
name = 'SPI flash'
longname = 'SPI flash chips'
desc = 'xx25 series SPI (NOR) flash chip protocol.'
license = 'gplv2+'
- inputs = ['logic']
+ inputs = ['spi']
outputs = ['spiflash']
annotations = cmd_annotation_classes() + (
- ('bits', 'Bits'),
- ('bits2', 'Bits2'),
- ('warnings', 'Warnings'),
+ ('bit', 'Bit'),
+ ('field', 'Field'),
+ ('warning', 'Warning'),
)
annotation_rows = (
- ('bits', 'Bits', (24, 25)),
- ('commands', 'Commands', tuple(range(23 + 1))),
- ('warnings', 'Warnings', (26,)),
+ ('bits', 'Bits', (L + 0,)),
+ ('fields', 'Fields', (L + 1,)),
+ ('commands', 'Commands', tuple(range(len(cmds)))),
+ ('warnings', 'Warnings', (L + 2,)),
+ )
+ options = (
+ {'id': 'chip', 'desc': 'Chip', 'default': tuple(chips.keys())[0],
+ 'values': tuple(chips.keys())},
+ {'id': 'format', 'desc': 'Data format', 'default': 'hex',
+ 'values': ('hex', 'ascii')},
)
- def __init__(self, **kwargs):
+ def __init__(self):
+ self.reset()
+
+ def reset(self):
+ self.device_id = -1
+ self.on_end_transaction = None
+ self.end_current_transaction()
+ self.writestate = 0
+
+ # Build dict mapping command keys to handler functions. Each
+ # command in 'cmds' (defined in lists.py) has a matching
+ # handler self.handle_<shortname>.
+ def get_handler(cmd):
+ s = 'handle_%s' % cmds[cmd][0].lower().replace('/', '_')
+ return getattr(self, s)
+ self.cmd_handlers = dict((cmd, get_handler(cmd)) for cmd in cmds.keys())
+
+ def end_current_transaction(self):
+ if self.on_end_transaction is not None: # Callback for CS# transition.
+ self.on_end_transaction()
+ self.on_end_transaction = None
self.state = None
self.cmdstate = 1
self.addr = 0
def start(self):
self.out_ann = self.register(srd.OUTPUT_ANN)
+ self.chip = chips[self.options['chip']]
+ self.vendor = self.options['chip'].split('_')[0]
def putx(self, data):
# Simplification, most annotations span exactly one SPI byte/packet.
self.put(self.ss, self.es, self.out_ann, data)
- def putb(self, data):
- self.put(self.block_ss, self.block_es, self.out_ann, data)
+ def putf(self, data):
+ self.put(self.ss_field, self.es_field, self.out_ann, data)
+
+ def putc(self, data):
+ self.put(self.ss_cmd, self.es_cmd, self.out_ann, data)
+
+ def device(self):
+ return device_name[self.vendor].get(self.device_id, 'Unknown')
+
+ def vendor_device(self):
+ return '%s %s' % (self.chip['vendor'], self.device())
+
+ def cmd_ann_list(self):
+ x, s = cmds[self.state][0], cmds[self.state][1]
+ return ['Command: %s (%s)' % (s, x), 'Command: %s' % s,
+ 'Cmd: %s' % s, 'Cmd: %s' % x, x]
+
+ def cmd_vendor_dev_list(self):
+ c, d = cmds[self.state], 'Device = %s' % self.vendor_device()
+ return ['%s (%s): %s' % (c[1], c[0], d), '%s: %s' % (c[1], d),
+ '%s: %s' % (c[0], d), d, self.vendor_device()]
+
+ def emit_cmd_byte(self):
+ self.ss_cmd = self.ss
+ self.putx([Ann.FIELD, self.cmd_ann_list()])
+ self.addr = 0
+
+ def emit_addr_bytes(self, mosi):
+ self.addr |= (mosi << ((4 - self.cmdstate) * 8))
+ b = ((3 - (self.cmdstate - 2)) * 8) - 1
+ self.putx([Ann.BIT,
+ ['Address bits %d..%d: 0x%02x' % (b, b - 7, mosi),
+ 'Addr bits %d..%d: 0x%02x' % (b, b - 7, mosi),
+ 'Addr bits %d..%d' % (b, b - 7), 'A%d..A%d' % (b, b - 7)]])
+ if self.cmdstate == 2:
+ self.ss_field = self.ss
+ if self.cmdstate == 4:
+ self.es_field = self.es
+ self.putf([Ann.FIELD, ['Address: 0x%06x' % self.addr,
+ 'Addr: 0x%06x' % self.addr, '0x%06x' % self.addr]])
def handle_wren(self, mosi, miso):
- self.putx([0, ['Command: %s' % cmds[self.state][1]]])
- self.state = None
+ self.putx([Ann.WREN, self.cmd_ann_list()])
+ self.writestate = 1
def handle_wrdi(self, mosi, miso):
- pass # TODO
+ self.putx([Ann.WRDI, self.cmd_ann_list()])
+ self.writestate = 0
- # TODO: Check/display device ID / name
def handle_rdid(self, mosi, miso):
if self.cmdstate == 1:
# Byte 1: Master sends command ID.
- self.ss_block = self.ss
- self.putx([2, ['Command: %s' % cmds[self.state][1]]])
+ self.emit_cmd_byte()
elif self.cmdstate == 2:
# Byte 2: Slave sends the JEDEC manufacturer ID.
- self.putx([2, ['Manufacturer ID: 0x%02x' % miso]])
+ self.putx([Ann.FIELD, ['Manufacturer ID: 0x%02x' % miso]])
elif self.cmdstate == 3:
- # Byte 3: Slave sends the memory type (0x20 for this chip).
- self.putx([2, ['Memory type: 0x%02x' % miso]])
+ # Byte 3: Slave sends the memory type.
+ self.putx([Ann.FIELD, ['Memory type: 0x%02x' % miso]])
elif self.cmdstate == 4:
# Byte 4: Slave sends the device ID.
self.device_id = miso
- self.putx([2, ['Device ID: 0x%02x' % miso]])
+ self.putx([Ann.FIELD, ['Device ID: 0x%02x' % miso]])
if self.cmdstate == 4:
- # TODO: Check self.device_id is valid & exists in device_names.
- # TODO: Same device ID? Check!
- d = 'Device: Macronix %s' % device_name[self.device_id]
- self.put(self.ss_block, self.es, self.out_ann, [0, [d]])
+ self.es_cmd = self.es
+ self.putc([Ann.RDID, self.cmd_vendor_dev_list()])
self.state = None
else:
self.cmdstate += 1
# When done, the master de-asserts CS# again.
if self.cmdstate == 1:
# Byte 1: Master sends command ID.
- self.putx([3, ['Command: %s' % cmds[self.state][1]]])
+ self.emit_cmd_byte()
elif self.cmdstate >= 2:
# Bytes 2-x: Slave sends status register as long as master clocks.
- if self.cmdstate <= 3: # TODO: While CS# asserted.
- self.putx([24, ['Status register: 0x%02x' % miso]])
- self.putx([25, [decode_status_reg(miso)]])
-
- if self.cmdstate == 3: # TODO: If CS# got de-asserted.
- self.state = None
- return
+ self.es_cmd = self.es
+ self.putx([Ann.BIT, [decode_status_reg(miso)]])
+ self.putx([Ann.FIELD, ['Status register']])
+ self.putc([Ann.RDSR, self.cmd_ann_list()])
+ self.cmdstate += 1
+ def handle_rdsr2(self, mosi, miso):
+ # Read status register 2: Master asserts CS#, sends RDSR2 command,
+ # reads status register 2 byte. If CS# is kept asserted, the status
+ # register 2 can be read continuously / multiple times in a row.
+ # When done, the master de-asserts CS# again.
+ if self.cmdstate == 1:
+ # Byte 1: Master sends command ID.
+ self.emit_cmd_byte()
+ elif self.cmdstate >= 2:
+ # Bytes 2-x: Slave sends status register 2 as long as master clocks.
+ self.es_cmd = self.es
+ # TODO: Decode status register 2 correctly.
+ self.putx([Ann.BIT, [decode_status_reg(miso)]])
+ self.putx([Ann.FIELD, ['Status register 2']])
+ self.putc([Ann.RDSR2, self.cmd_ann_list()])
self.cmdstate += 1
def handle_wrsr(self, mosi, miso):
- pass # TODO
+ # Write status register: Master asserts CS#, sends WRSR command,
+ # writes 1 or 2 status register byte(s).
+ # When done, the master de-asserts CS# again. If this doesn't happen
+ # the WRSR command will not be executed.
+ if self.cmdstate == 1:
+ # Byte 1: Master sends command ID.
+ self.emit_cmd_byte()
+ elif self.cmdstate == 2:
+ # Byte 2: Master sends status register 1.
+ self.putx([Ann.BIT, [decode_status_reg(mosi)]])
+ self.putx([Ann.FIELD, ['Status register 1']])
+ elif self.cmdstate == 3:
+ # Byte 3: Master sends status register 2.
+ # TODO: Decode status register 2 correctly.
+ self.putx([Ann.BIT, [decode_status_reg(mosi)]])
+ self.putx([Ann.FIELD, ['Status register 2']])
+ self.es_cmd = self.es
+ self.putc([Ann.WRSR, self.cmd_ann_list()])
+ self.cmdstate += 1
def handle_read(self, mosi, miso):
# Read data bytes: Master asserts CS#, sends READ command, sends
# 3-byte address, reads >= 1 data bytes, de-asserts CS#.
if self.cmdstate == 1:
# Byte 1: Master sends command ID.
- self.putx([5, ['Command: %s' % cmds[self.state][1]]])
+ self.emit_cmd_byte()
elif self.cmdstate in (2, 3, 4):
# Bytes 2/3/4: Master sends read address (24bits, MSB-first).
- self.addr |= (mosi << ((4 - self.cmdstate) * 8))
- # self.putx([0, ['Read address, byte %d: 0x%02x' % \
- # (4 - self.cmdstate, mosi)]])
- if self.cmdstate == 4:
- self.putx([24, ['Read address: 0x%06x' % self.addr]])
- self.addr = 0
+ self.emit_addr_bytes(mosi)
elif self.cmdstate >= 5:
# Bytes 5-x: Master reads data bytes (until CS# de-asserted).
- # TODO: For now we hardcode 256 bytes per READ command.
- if self.cmdstate <= 256 + 4: # TODO: While CS# asserted.
- self.data.append(miso)
- # self.putx([0, ['New read byte: 0x%02x' % miso]])
-
- if self.cmdstate == 256 + 4: # TODO: If CS# got de-asserted.
- # s = ', '.join(map(hex, self.data))
- s = ''.join(map(chr, self.data))
- self.putx([24, ['Read data']])
- self.putx([25, ['Read data: %s' % s]])
- self.data = []
- self.state = None
- return
+ self.es_field = self.es # Will be overwritten for each byte.
+ if self.cmdstate == 5:
+ self.ss_field = self.ss
+ self.on_end_transaction = lambda: self.output_data_block('Data', Ann.READ)
+ self.data.append(miso)
+ self.cmdstate += 1
+ def handle_write_common(self, mosi, miso, ann):
+ # Write data bytes: Master asserts CS#, sends WRITE command, sends
+ # 3-byte address, writes >= 1 data bytes, de-asserts CS#.
+ if self.cmdstate == 1:
+ # Byte 1: Master sends command ID.
+ self.emit_cmd_byte()
+ if self.writestate == 0:
+ self.putc([Ann.WARN, ['Warning: WREN might be missing']])
+ elif self.cmdstate in (2, 3, 4):
+ # Bytes 2/3/4: Master sends write address (24bits, MSB-first).
+ self.emit_addr_bytes(mosi)
+ elif self.cmdstate >= 5:
+ # Bytes 5-x: Master writes data bytes (until CS# de-asserted).
+ self.es_field = self.es # Will be overwritten for each byte.
+ if self.cmdstate == 5:
+ self.ss_field = self.ss
+ self.on_end_transaction = lambda: self.output_data_block('Data', ann)
+ self.data.append(mosi)
self.cmdstate += 1
+ def handle_write1(self, mosi, miso):
+ self.handle_write_common(mosi, miso, Ann.WRITE1)
+
+ def handle_write2(self, mosi, miso):
+ self.handle_write_common(mosi, miso, Ann.WRITE2)
+
def handle_fast_read(self, mosi, miso):
# Fast read: Master asserts CS#, sends FAST READ command, sends
# 3-byte address + 1 dummy byte, reads >= 1 data bytes, de-asserts CS#.
if self.cmdstate == 1:
# Byte 1: Master sends command ID.
- self.putx([5, ['Command: %s' % cmds[self.state][1]]])
+ self.emit_cmd_byte()
elif self.cmdstate in (2, 3, 4):
# Bytes 2/3/4: Master sends read address (24bits, MSB-first).
- self.putx([24, ['AD%d: 0x%02x' % (self.cmdstate - 1, mosi)]])
- if self.cmdstate == 2:
- self.block_ss = self.ss
- self.addr |= (mosi << ((4 - self.cmdstate) * 8))
+ self.emit_addr_bytes(mosi)
elif self.cmdstate == 5:
- self.putx([24, ['Dummy byte: 0x%02x' % mosi]])
- self.block_es = self.es
- self.putb([5, ['Read address: 0x%06x' % self.addr]])
- self.addr = 0
+ self.putx([Ann.BIT, ['Dummy byte: 0x%02x' % mosi]])
elif self.cmdstate >= 6:
# Bytes 6-x: Master reads data bytes (until CS# de-asserted).
- # TODO: For now we hardcode 32 bytes per FAST READ command.
+ self.es_field = self.es # Will be overwritten for each byte.
if self.cmdstate == 6:
- self.block_ss = self.ss
- if self.cmdstate <= 32 + 5: # TODO: While CS# asserted.
- self.data.append(miso)
- if self.cmdstate == 32 + 5: # TODO: If CS# got de-asserted.
- self.block_es = self.es
- s = ' '.join([hex(b)[2:] for b in self.data])
- self.putb([25, ['Read data: %s' % s]])
- self.data = []
- self.state = None
- return
-
+ self.ss_field = self.ss
+ self.on_end_transaction = lambda: self.output_data_block('Data', Ann.FAST_READ)
+ self.data.append(miso)
self.cmdstate += 1
def handle_2read(self, mosi, miso):
- pass # TODO
+ # 2x I/O read (fast read dual I/O): Master asserts CS#, sends 2READ
+ # command, sends 3-byte address + 1 dummy byte, reads >= 1 data bytes,
+ # de-asserts CS#. All data after the command is sent via two I/O pins.
+ # MOSI = SIO0 = even bits, MISO = SIO1 = odd bits.
+ if self.cmdstate != 1:
+ b1, b2 = decode_dual_bytes(mosi, miso)
+ if self.cmdstate == 1:
+ # Byte 1: Master sends command ID.
+ self.emit_cmd_byte()
+ elif self.cmdstate == 2:
+ # Bytes 2/3(/4): Master sends read address (24bits, MSB-first).
+ # Handle bytes 2 and 3 here.
+ self.emit_addr_bytes(b1)
+ self.cmdstate = 3
+ self.emit_addr_bytes(b2)
+ elif self.cmdstate == 4:
+ # Byte 5: Dummy byte. Also handle byte 4 (address LSB) here.
+ self.emit_addr_bytes(b1)
+ self.cmdstate = 5
+ self.putx([Ann.BIT, ['Dummy byte: 0x%02x' % b2]])
+ elif self.cmdstate >= 6:
+ # Bytes 6-x: Master reads data bytes (until CS# de-asserted).
+ self.es_field = self.es # Will be overwritten for each byte.
+ if self.cmdstate == 6:
+ self.ss_field = self.ss
+ self.on_end_transaction = lambda: self.output_data_block('Data', Ann.READ2X)
+ self.data.append(b1)
+ self.data.append(b2)
+ self.cmdstate += 1
+
+ def handle_status(self, mosi, miso):
+ if self.cmdstate == 1:
+ # Byte 1: Master sends command ID.
+ self.emit_cmd_byte()
+ self.on_end_transaction = lambda: self.putc([Ann.STATUS, [cmds[self.state][1]]])
+ else:
+ # Will be overwritten for each byte.
+ self.es_cmd = self.es
+ self.es_field = self.es
+ if self.cmdstate == 2:
+ self.ss_field = self.ss
+ self.putx([Ann.BIT, ['Status register byte %d: 0x%02x' % ((self.cmdstate % 2) + 1, miso)]])
+ self.cmdstate += 1
# TODO: Warn/abort if we don't see the necessary amount of bytes.
- # TODO: Warn if WREN was not seen before.
def handle_se(self, mosi, miso):
if self.cmdstate == 1:
# Byte 1: Master sends command ID.
- self.addr = 0
- self.ss_block = self.ss
- self.putx([8, ['Command: %s' % cmds[self.state][1]]])
+ self.emit_cmd_byte()
+ if self.writestate == 0:
+ self.putx([Ann.WARN, ['Warning: WREN might be missing']])
elif self.cmdstate in (2, 3, 4):
# Bytes 2/3/4: Master sends sector address (24bits, MSB-first).
- self.addr |= (mosi << ((4 - self.cmdstate) * 8))
- # self.putx([0, ['Sector address, byte %d: 0x%02x' % \
- # (4 - self.cmdstate, mosi)]])
+ self.emit_addr_bytes(mosi)
if self.cmdstate == 4:
+ self.es_cmd = self.es
d = 'Erase sector %d (0x%06x)' % (self.addr, self.addr)
- self.put(self.ss_block, self.es, self.out_ann, [24, [d]])
+ self.putc([Ann.SE, [d]])
# TODO: Max. size depends on chip, check that too if possible.
if self.addr % 4096 != 0:
# Sector addresses must be 4K-aligned (same for all 3 chips).
- d = 'Warning: Invalid sector address!'
- self.put(self.ss_block, self.es, self.out_ann, [101, [d]])
+ self.putc([Ann.WARN, ['Warning: Invalid sector address!']])
self.state = None
else:
self.cmdstate += 1
pass # TODO
def handle_ce(self, mosi, miso):
- pass # TODO
+ self.putx([Ann.CE, self.cmd_ann_list()])
+ if self.writestate == 0:
+ self.putx([Ann.WARN, ['Warning: WREN might be missing']])
def handle_ce2(self, mosi, miso):
- pass # TODO
+ self.putx([Ann.CE2, self.cmd_ann_list()])
+ if self.writestate == 0:
+ self.putx([Ann.WARN, ['Warning: WREN might be missing']])
def handle_pp(self, mosi, miso):
# Page program: Master asserts CS#, sends PP command, sends 3-byte
# page address, sends >= 1 data bytes, de-asserts CS#.
if self.cmdstate == 1:
# Byte 1: Master sends command ID.
- self.putx([12, ['Command: %s' % cmds[self.state][1]]])
+ self.emit_cmd_byte()
elif self.cmdstate in (2, 3, 4):
# Bytes 2/3/4: Master sends page address (24bits, MSB-first).
- self.addr |= (mosi << ((4 - self.cmdstate) * 8))
- # self.putx([0, ['Page address, byte %d: 0x%02x' % \
- # (4 - self.cmdstate, mosi)]])
- if self.cmdstate == 4:
- self.putx([24, ['Page address: 0x%06x' % self.addr]])
- self.addr = 0
+ self.emit_addr_bytes(mosi)
elif self.cmdstate >= 5:
# Bytes 5-x: Master sends data bytes (until CS# de-asserted).
- # TODO: For now we hardcode 256 bytes per page / PP command.
- if self.cmdstate <= 256 + 4: # TODO: While CS# asserted.
- self.data.append(mosi)
- # self.putx([0, ['New data byte: 0x%02x' % mosi]])
-
- if self.cmdstate == 256 + 4: # TODO: If CS# got de-asserted.
- # s = ', '.join(map(hex, self.data))
- s = ''.join(map(chr, self.data))
- self.putx([24, ['Page data']])
- self.putx([25, ['Page data: %s' % s]])
- self.data = []
- self.state = None
- return
-
+ self.es_field = self.es # Will be overwritten for each byte.
+ if self.cmdstate == 5:
+ self.ss_field = self.ss
+ self.on_end_transaction = lambda: self.output_data_block('Data', Ann.PP)
+ self.data.append(mosi)
self.cmdstate += 1
def handle_cp(self, mosi, miso):
pass # TODO
def handle_rdp_res(self, mosi, miso):
- pass # TODO
+ if self.cmdstate == 1:
+ # Byte 1: Master sends command ID.
+ self.emit_cmd_byte()
+ elif self.cmdstate in (2, 3, 4):
+ # Bytes 2/3/4: Master sends three dummy bytes.
+ self.putx([Ann.FIELD, ['Dummy byte: %02x' % mosi]])
+ elif self.cmdstate == 5:
+ # Byte 5: Slave sends device ID.
+ self.es_cmd = self.es
+ self.device_id = miso
+ self.putx([Ann.FIELD, ['Device ID: %s' % self.device()]])
+ d = 'Device = %s' % self.vendor_device()
+ self.putc([Ann.RDP_RES, self.cmd_vendor_dev_list()])
+ self.state = None
+ self.cmdstate += 1
def handle_rems(self, mosi, miso):
if self.cmdstate == 1:
# Byte 1: Master sends command ID.
- self.ss_block = self.ss
- self.putx([16, ['Command: %s' % cmds[self.state][1]]])
+ self.emit_cmd_byte()
elif self.cmdstate in (2, 3):
# Bytes 2/3: Master sends two dummy bytes.
- # TODO: Check dummy bytes? Check reply from device?
- self.putx([24, ['Dummy byte: %s' % mosi]])
+ self.putx([Ann.FIELD, ['Dummy byte: 0x%02x' % mosi]])
elif self.cmdstate == 4:
# Byte 4: Master sends 0x00 or 0x01.
# 0x00: Master wants manufacturer ID as first reply byte.
# 0x01: Master wants device ID as first reply byte.
self.manufacturer_id_first = True if (mosi == 0x00) else False
d = 'manufacturer' if (mosi == 0x00) else 'device'
- self.putx([24, ['Master wants %s ID first' % d]])
+ self.putx([Ann.FIELD, ['Master wants %s ID first' % d]])
elif self.cmdstate == 5:
# Byte 5: Slave sends manufacturer ID (or device ID).
self.ids = [miso]
d = 'Manufacturer' if self.manufacturer_id_first else 'Device'
- self.putx([24, ['%s ID' % d]])
+ self.putx([Ann.FIELD, ['%s ID: 0x%02x' % (d, miso)]])
elif self.cmdstate == 6:
# Byte 6: Slave sends device ID (or manufacturer ID).
self.ids.append(miso)
- d = 'Manufacturer' if self.manufacturer_id_first else 'Device'
- self.putx([24, ['%s ID' % d]])
+ d = 'Device' if self.manufacturer_id_first else 'Manufacturer'
+ self.putx([Ann.FIELD, ['%s ID: 0x%02x' % (d, miso)]])
if self.cmdstate == 6:
id = self.ids[1] if self.manufacturer_id_first else self.ids[0]
- self.putx([24, ['Device: Macronix %s' % device_name[id]]])
+ self.device_id = id
+ self.es_cmd = self.es
+ self.putc([Ann.REMS, self.cmd_vendor_dev_list()])
self.state = None
else:
self.cmdstate += 1
def handle_dsry(self, mosi, miso):
pass # TODO
- def decode(self, ss, es, data):
+ def output_data_block(self, label, idx):
+ # Print accumulated block of data
+ # (called on CS# de-assert via self.on_end_transaction callback).
+ self.es_cmd = self.es # End on the CS# de-assert sample.
+ if self.options['format'] == 'hex':
+ s = ' '.join([('%02x' % b) for b in self.data])
+ else:
+ s = ''.join(map(chr, self.data))
+ self.putf([Ann.FIELD, ['%s (%d bytes)' % (label, len(self.data))]])
+ self.putc([idx, ['%s (addr 0x%06x, %d bytes): %s' % \
+ (cmds[self.state][1], self.addr, len(self.data), s)]])
+ def decode(self, ss, es, data):
ptype, mosi, miso = data
- # if ptype == 'DATA':
- # self.putx([0, ['MOSI: 0x%02x, MISO: 0x%02x' % (mosi, miso)]])
+ self.ss, self.es = ss, es
- # if ptype == 'CS-CHANGE':
- # if mosi == 1 and miso == 0:
- # self.putx([0, ['Asserting CS#']])
- # elif mosi == 0 and miso == 1:
- # self.putx([0, ['De-asserting CS#']])
+ if ptype == 'CS-CHANGE':
+ self.end_current_transaction()
if ptype != 'DATA':
return
- self.ss, self.es = ss, es
-
# If we encountered a known chip command, enter the resp. state.
if self.state is None:
self.state = mosi
self.cmdstate = 1
# Handle commands.
- if self.state in cmds:
- s = 'handle_%s' % cmds[self.state][0].lower().replace('/', '_')
- handle_reg = getattr(self, s)
- handle_reg(mosi, miso)
- else:
- self.putx([24, ['Unknown command: 0x%02x' % mosi]])
+ try:
+ self.cmd_handlers[self.state](mosi, miso)
+ except KeyError:
+ self.putx([Ann.BIT, ['Unknown command: 0x%02x' % mosi]])
self.state = None