## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
-#
-# Macronix MX25Lxx05D SPI (NOR) flash chip decoder.
-# Works for MX25L1605D/MX25L3205D/MX25L6405D.
-#
-
-#
-# TODO: Description
-#
-# Details:
-# http://www.macronix.com/QuickPlace/hq/PageLibrary4825740B00298A3B.nsf/h_Index/3F21BAC2E121E17848257639003A3146/$File/MX25L1605D-3205D-6405D-1.5.pdf
-#
+# Macronix MX25Lxx05D SPI (NOR) flash chip protocol decoder
+
+# Note: Works for MX25L1605D/MX25L3205D/MX25L6405D.
import sigrokdecode as srd
-# States
-IDLE = -1
-
-# Chip commands (also used as additional decoder states).
-CMD_WREN = 0x06
-CMD_WRDI = 0x04
-CMD_RDID = 0x9f
-CMD_RDSR = 0x05
-CMD_WRSR = 0x01
-CMD_READ = 0x03
-CMD_FAST_READ = 0x0b
-CMD_2READ = 0xbb
-CMD_SE = 0x20
-CMD_BE = 0xd8
-CMD_CE = 0x60
-CMD_CE2 = 0xc7
-CMD_PP = 0x02
-CMD_CP = 0xad
-CMD_DP = 0xb9
-# CMD_RDP = 0xab
-# CMD_RES = 0xab
-CMD_RDP_RES = 0xab # Note: RDP/RES have the same ID.
-CMD_REMS = 0x90
-CMD_REMS2 = 0xef
-CMD_ENSO = 0xb1
-CMD_EXSO = 0xc1
-CMD_RDSCUR = 0x2b
-CMD_WRSCUR = 0x2f
-CMD_ESRY = 0x70
-CMD_DSRY = 0x80
-
-# TODO: (Short) command names as strings in a dict, too?
-
-# Dict which maps command IDs to their description.
+# Dict which maps command IDs to their names and descriptions.
cmds = {
- CMD_WREN: 'Write enable',
- CMD_WRDI: 'Write disable',
- CMD_RDID: 'Read identification',
- CMD_RDSR: 'Read status register',
- CMD_WRSR: 'Write status register',
- CMD_READ: 'Read data',
- CMD_FAST_READ: 'Fast read data',
- CMD_2READ: '2x I/O read',
- CMD_SE: 'Sector erase',
- CMD_BE: 'Block erase',
- CMD_CE: 'Chip erase',
- CMD_CE2: 'Chip erase', # Alternative command ID
- CMD_PP: 'Page program',
- CMD_CP: 'Continuously program mode',
- CMD_DP: 'Deep power down',
- # CMD_RDP: 'Release from deep powerdown',
- # CMD_RES: 'Read electronic ID',
- CMD_RDP_RES: 'Release from deep powerdown / Read electronic ID',
- CMD_REMS: 'Read electronic manufacturer & device ID',
- CMD_REMS2: 'Read ID for 2x I/O mode',
- CMD_ENSO: 'Enter secured OTP',
- CMD_EXSO: 'Exit secured OTP',
- CMD_RDSCUR: 'Read security register',
- CMD_WRSCUR: 'Write security register',
- CMD_ESRY: 'Enable SO to output RY/BY#',
- CMD_DSRY: 'Disable SO to output RY/BY#',
+ 0x06: ('WREN', 'Write enable'),
+ 0x04: ('WRDI', 'Write disable'),
+ 0x9f: ('RDID', 'Read identification'),
+ 0x05: ('RDSR', 'Read status register'),
+ 0x01: ('WRSR', 'Write status register'),
+ 0x03: ('READ', 'Read data'),
+ 0x0b: ('FAST/READ', 'Fast read data'),
+ 0xbb: ('2READ', '2x I/O read'),
+ 0x20: ('SE', 'Sector erase'),
+ 0xd8: ('BE', 'Block erase'),
+ 0x60: ('CE', 'Chip erase'),
+ 0xc7: ('CE2', 'Chip erase'), # Alternative command ID
+ 0x02: ('PP', 'Page program'),
+ 0xad: ('CP', 'Continuously program mode'),
+ 0xb9: ('DP', 'Deep power down'),
+ 0xab: ('RDP/RES', 'Release from deep powerdown / Read electronic ID'),
+ 0x90: ('REMS', 'Read electronic manufacturer & device ID'),
+ 0xef: ('REMS2', 'Read ID for 2x I/O mode'),
+ 0xb1: ('ENSO', 'Enter secured OTP'),
+ 0xc1: ('EXSO', 'Exit secured OTP'),
+ 0x2b: ('RDSCUR', 'Read security register'),
+ 0x2f: ('WRSCUR', 'Write security register'),
+ 0x70: ('ESRY', 'Enable SO to output RY/BY#'),
+ 0x80: ('DSRY', 'Disable SO to output RY/BY#'),
}
device_name = {
0x16: 'MX25L6405D',
}
+def decode_status_reg(data):
+ # TODO: Additional per-bit(s) self.put() calls with correct start/end.
+
+ # Bits[0:0]: WIP (write in progress)
+ s = 'W' if (data & (1 << 0)) else 'No w'
+ ret = '%srite operation in progress.\n' % s
+
+ # Bits[1:1]: WEL (write enable latch)
+ s = '' if (data & (1 << 1)) else 'not '
+ ret += 'Internal write enable latch is %sset.\n' % s
+
+ # Bits[5:2]: Block protect bits
+ # TODO: More detailed decoding (chip-dependent).
+ ret += 'Block protection bits (BP3-BP0): 0x%x.\n' % ((data & 0x3c) >> 2)
+
+ # Bits[6:6]: Continuously program mode (CP mode)
+ s = '' if (data & (1 << 6)) else 'not '
+ ret += 'Device is %sin continuously program mode (CP mode).\n' % s
+
+ # Bits[7:7]: SRWD (status register write disable)
+ s = 'not ' if (data & (1 << 7)) else ''
+ ret += 'Status register writes are %sallowed.\n' % s
+
+ return ret
+
class Decoder(srd.Decoder):
api_version = 1
id = 'mx25lxx05d'
name = 'MX25Lxx05D'
longname = 'Macronix MX25Lxx05D'
- desc = 'Macronix MX25Lxx05D SPI flash chip decoder'
- longdesc = 'TODO'
+ desc = 'SPI (NOR) flash chip protocol.'
license = 'gplv2+'
- inputs = ['spi', 'spi', 'logic']
+ inputs = ['spi', 'logic']
outputs = ['mx25lxx05d']
- probes = [] # TODO: HOLD#, WP#/ACC
- options = {} # TODO
+ probes = []
+ optional_probes = [
+ {'id': 'hold', 'name': 'HOLD#', 'desc': 'TODO.'},
+ {'id': 'wp_acc', 'name': 'WP#/ACC', 'desc': 'TODO.'},
+ ]
+ options = {}
annotations = [
- ['TODO', 'TODO'],
+ ['Text', 'Human-readable text'],
+ ['Verbose decode', 'Decoded register bits, read/write data'],
+ ['Warnings', 'Human-readable warnings'],
]
def __init__(self, **kwargs):
- self.state = IDLE
- self.cmdstate = 1 # TODO
+ self.state = None
+ self.cmdstate = 1
+ self.addr = 0
+ self.data = []
def start(self, metadata):
# self.out_proto = self.add(srd.OUTPUT_PROTO, 'mx25lxx05d')
def report(self):
pass
- def putann(self, data):
- # Simplification, most annotations span extactly one SPI byte/packet.
+ def putx(self, data):
+ # Simplification, most annotations span exactly one SPI byte/packet.
self.put(self.ss, self.es, self.out_ann, data)
def handle_wren(self, mosi, miso):
- self.putann([0, ['Command: %s' % cmds[self.cmd]]])
- self.state = IDLE
+ self.putx([0, ['Command: %s' % cmds[self.state][1]]])
+ self.state = None
+
+ def handle_wrdi(self, mosi, miso):
+ pass # TODO
# TODO: Check/display device ID / name
def handle_rdid(self, mosi, miso):
if self.cmdstate == 1:
# Byte 1: Master sends command ID.
self.start_sample = self.ss
- self.putann([0, ['Command: %s' % cmds[self.cmd]]])
+ self.putx([0, ['Command: %s' % cmds[self.state][1]]])
elif self.cmdstate == 2:
# Byte 2: Slave sends the JEDEC manufacturer ID.
- self.putann([0, ['Manufacturer ID: 0x%02x' % miso]])
+ self.putx([0, ['Manufacturer ID: 0x%02x' % miso]])
elif self.cmdstate == 3:
# Byte 3: Slave sends the memory type (0x20 for this chip).
- self.putann([0, ['Memory type: 0x%02x' % miso]])
+ self.putx([0, ['Memory type: 0x%02x' % miso]])
elif self.cmdstate == 4:
# Byte 4: Slave sends the device ID.
self.device_id = miso
- self.putann([0, ['Device ID: 0x%02x' % miso]])
+ self.putx([0, ['Device ID: 0x%02x' % miso]])
if self.cmdstate == 4:
# TODO: Check self.device_id is valid & exists in device_names.
# TODO: Same device ID? Check!
d = 'Device: Macronix %s' % device_name[self.device_id]
self.put(self.start_sample, self.es, self.out_ann, [0, [d]])
- self.state = IDLE
+ self.state = None
else:
self.cmdstate += 1
+ def handle_rdsr(self, mosi, miso):
+ # Read status register: Master asserts CS#, sends RDSR command,
+ # reads status register byte. If CS# is kept asserted, the status
+ # register can be read continuously / multiple times in a row.
+ # When done, the master de-asserts CS# again.
+ if self.cmdstate == 1:
+ # Byte 1: Master sends command ID.
+ self.putx([0, ['Command: %s' % cmds[self.state][1]]])
+ elif self.cmdstate >= 2:
+ # Bytes 2-x: Slave sends status register as long as master clocks.
+ if self.cmdstate <= 3: # TODO: While CS# asserted.
+ self.putx([0, ['Status register: 0x%02x' % miso]])
+ self.putx([1, [decode_status_reg(miso)]])
+
+ if self.cmdstate == 3: # TODO: If CS# got de-asserted.
+ self.state = None
+ return
+
+ self.cmdstate += 1
+
+ def handle_wrsr(self, mosi, miso):
+ pass # TODO
+
+ def handle_read(self, mosi, miso):
+ # Read data bytes: Master asserts CS#, sends READ command, sends
+ # 3-byte address, reads >= 1 data bytes, de-asserts CS#.
+ if self.cmdstate == 1:
+ # Byte 1: Master sends command ID.
+ self.putx([0, ['Command: %s' % cmds[self.state][1]]])
+ elif self.cmdstate in (2, 3, 4):
+ # Bytes 2/3/4: Master sends read address (24bits, MSB-first).
+ self.addr |= (mosi << ((4 - self.cmdstate) * 8))
+ # self.putx([0, ['Read address, byte %d: 0x%02x' % \
+ # (4 - self.cmdstate, mosi)]])
+ if self.cmdstate == 4:
+ self.putx([0, ['Read address: 0x%06x' % self.addr]])
+ self.addr = 0
+ elif self.cmdstate >= 5:
+ # Bytes 5-x: Master reads data bytes (until CS# de-asserted).
+ # TODO: For now we hardcode 256 bytes per READ command.
+ if self.cmdstate <= 256 + 4: # TODO: While CS# asserted.
+ self.data.append(miso)
+ # self.putx([0, ['New read byte: 0x%02x' % miso]])
+
+ if self.cmdstate == 256 + 4: # TODO: If CS# got de-asserted.
+ # s = ', '.join(map(hex, self.data))
+ s = ''.join(map(chr, self.data))
+ self.putx([0, ['Read data']])
+ self.putx([1, ['Read data: %s' % s]])
+ self.data = []
+ self.state = None
+ return
+
+ self.cmdstate += 1
+
+ def handle_fast_read(self, mosi, miso):
+ pass # TODO
+
+ def handle_2read(self, mosi, miso):
+ pass # TODO
+
# TODO: Warn/abort if we don't see the necessary amount of bytes.
# TODO: Warn if WREN was not seen before.
def handle_se(self, mosi, miso):
# Byte 1: Master sends command ID.
self.addr = 0
self.start_sample = self.ss
- self.putann([0, ['Command: %s' % cmds[self.cmd]]])
+ self.putx([0, ['Command: %s' % cmds[self.state][1]]])
elif self.cmdstate in (2, 3, 4):
- # Bytes 2/3/4: Master sends address of the sector to erase.
- # Note: Assumes SPI data is 8 bits wide (it is for MX25Lxx05D).
- # TODO: LSB-first of MSB-first?
- self.addr <<= 8
- self.addr |= mosi
- self.putann([0, ['Address byte %d: 0x%02x' % (self.cmdstate - 1,
- miso)]]) # TODO: Count from 0 or 1?
+ # Bytes 2/3/4: Master sends sectror address (24bits, MSB-first).
+ self.addr |= (mosi << ((4 - self.cmdstate) * 8))
+ # self.putx([0, ['Sector address, byte %d: 0x%02x' % \
+ # (4 - self.cmdstate, mosi)]])
if self.cmdstate == 4:
- d = 'Erase sector %d' % self.addr
+ d = 'Erase sector %d (0x%06x)' % (self.addr, self.addr)
self.put(self.start_sample, self.es, self.out_ann, [0, [d]])
# TODO: Max. size depends on chip, check that too if possible.
if self.addr % 4096 != 0:
# Sector addresses must be 4K-aligned (same for all 3 chips).
- d = 'Warning: Invalid sector address!' # TODO: type == WARN?
- self.put(self.start_sample, self.es, self.out_ann, [0, [d]])
- self.state = IDLE
+ d = 'Warning: Invalid sector address!'
+ self.put(self.start_sample, self.es, self.out_ann, [2, [d]])
+ self.state = None
else:
self.cmdstate += 1
+ def handle_be(self, mosi, miso):
+ pass # TODO
+
+ def handle_ce(self, mosi, miso):
+ pass # TODO
+
+ def handle_ce2(self, mosi, miso):
+ pass # TODO
+
+ def handle_pp(self, mosi, miso):
+ # Page program: Master asserts CS#, sends PP command, sends 3-byte
+ # page address, sends >= 1 data bytes, de-asserts CS#.
+ if self.cmdstate == 1:
+ # Byte 1: Master sends command ID.
+ self.putx([0, ['Command: %s' % cmds[self.state][1]]])
+ elif self.cmdstate in (2, 3, 4):
+ # Bytes 2/3/4: Master sends page address (24bits, MSB-first).
+ self.addr |= (mosi << ((4 - self.cmdstate) * 8))
+ # self.putx([0, ['Page address, byte %d: 0x%02x' % \
+ # (4 - self.cmdstate, mosi)]])
+ if self.cmdstate == 4:
+ self.putx([0, ['Page address: 0x%06x' % self.addr]])
+ self.addr = 0
+ elif self.cmdstate >= 5:
+ # Bytes 5-x: Master sends data bytes (until CS# de-asserted).
+ # TODO: For now we hardcode 256 bytes per page / PP command.
+ if self.cmdstate <= 256 + 4: # TODO: While CS# asserted.
+ self.data.append(mosi)
+ # self.putx([0, ['New data byte: 0x%02x' % mosi]])
+
+ if self.cmdstate == 256 + 4: # TODO: If CS# got de-asserted.
+ # s = ', '.join(map(hex, self.data))
+ s = ''.join(map(chr, self.data))
+ self.putx([0, ['Page data']])
+ self.putx([1, ['Page data: %s' % s]])
+ self.data = []
+ self.state = None
+ return
+
+ self.cmdstate += 1
+
+ def handle_cp(self, mosi, miso):
+ pass # TODO
+
+ def handle_dp(self, mosi, miso):
+ pass # TODO
+
+ def handle_rdp_res(self, mosi, miso):
+ pass # TODO
+
def handle_rems(self, mosi, miso):
if self.cmdstate == 1:
# Byte 1: Master sends command ID.
self.start_sample = self.ss
- self.putann([0, ['Command: %s' % cmds[self.cmd]]])
+ self.putx([0, ['Command: %s' % cmds[self.state][1]]])
elif self.cmdstate in (2, 3):
# Bytes 2/3: Master sends two dummy bytes.
# TODO: Check dummy bytes? Check reply from device?
- self.putann([0, ['Dummy byte: %s' % mosi]])
+ self.putx([0, ['Dummy byte: %s' % mosi]])
elif self.cmdstate == 4:
# Byte 4: Master sends 0x00 or 0x01.
# 0x00: Master wants manufacturer ID as first reply byte.
# 0x01: Master wants device ID as first reply byte.
self.manufacturer_id_first = True if (mosi == 0x00) else False
d = 'manufacturer' if (mosi == 0x00) else 'device'
- self.putann([0, ['Master wants %s ID first' % d]])
+ self.putx([0, ['Master wants %s ID first' % d]])
elif self.cmdstate == 5:
# Byte 5: Slave sends manufacturer ID (or device ID).
self.ids = [miso]
d = 'Manufacturer' if self.manufacturer_id_first else 'Device'
- self.putann([0, ['%s ID' % d]])
+ self.putx([0, ['%s ID' % d]])
elif self.cmdstate == 6:
# Byte 6: Slave sends device ID (or manufacturer ID).
- self.ids += [miso]
+ self.ids.append(miso)
d = 'Manufacturer' if self.manufacturer_id_first else 'Device'
- self.putann([0, ['%s ID' % d]])
- else:
- # TODO: Error?
- pass
+ self.putx([0, ['%s ID' % d]])
if self.cmdstate == 6:
self.end_sample = self.es
id = self.ids[1] if self.manufacturer_id_first else self.ids[0]
- self.putann([0, ['Device: Macronix %s' % device_name[id]]])
- self.state = IDLE
+ self.putx([0, ['Device: Macronix %s' % device_name[id]]])
+ self.state = None
else:
self.cmdstate += 1
- def handle_rdsr(self, mosi, miso):
- self.putann([0, ['Command: %s (0x%02x)' % (cmds[self.cmd], miso)]])
- self.state = IDLE
+ def handle_rems2(self, mosi, miso):
+ pass # TODO
+
+ def handle_enso(self, mosi, miso):
+ pass # TODO
+
+ def handle_exso(self, mosi, miso):
+ pass # TODO
+
+ def handle_rdscur(self, mosi, miso):
+ pass # TODO
+
+ def handle_wrscur(self, mosi, miso):
+ pass # TODO
+
+ def handle_esry(self, mosi, miso):
+ pass # TODO
+
+ def handle_dsry(self, mosi, miso):
+ pass # TODO
def decode(self, ss, es, data):
ptype, mosi, miso = data
- if ptype != 'data':
+ # if ptype == 'DATA':
+ # self.putx([0, ['MOSI: 0x%02x, MISO: 0x%02x' % (mosi, miso)]])
+
+ # if ptype == 'CS-CHANGE':
+ # if mosi == 1 and miso == 0:
+ # self.putx([0, ['Asserting CS#']])
+ # elif mosi == 0 and miso == 1:
+ # self.putx([0, ['De-asserting CS#']])
+
+ if ptype != 'DATA':
return
- cmd = mosi
- self.ss = ss
- self.es = es
+ self.ss, self.es = ss, es
# If we encountered a known chip command, enter the resp. state.
- if self.state == IDLE:
- if cmd in cmds:
- self.state = cmd
- self.cmd = cmd # TODO: Eliminate?
- self.cmdstate = 1
- else:
- pass # TODO
- else:
- pass
+ if self.state == None:
+ self.state = mosi
+ self.cmdstate = 1
# Handle commands.
- # TODO: Use some generic way to invoke the resp. method.
- if self.state == CMD_WREN:
- self.handle_wren(mosi, miso)
- elif self.state == CMD_SE:
- self.handle_se(mosi, miso)
- elif self.state == CMD_RDID:
- self.handle_rdid(mosi, miso)
- if self.state == CMD_REMS:
- self.handle_rems(mosi, miso)
- if self.state == CMD_RDSR:
- self.handle_rdsr(mosi, miso)
+ if self.state in cmds:
+ s = 'handle_%s' % cmds[self.state][0].lower().replace('/', '_')
+ handle_reg = getattr(self, s)
+ handle_reg(mosi, miso)
else:
- self.put(0, 0, self.out_ann, [0, ['Unknown command: 0x%02x' % cmd]])
- self.state = IDLE
+ self.putx([0, ['Unknown command: 0x%02x' % mosi]])
+ self.state = None