## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+## along with this program; if not, see <http://www.gnu.org/licenses/>.
##
# Addresses/devices. Items that are not listed are reserved/unknown.
address = {
+ 0x00: 'Joy-it SBC-IRC01',
0x40: 'Matsui TV',
+ 0xEA41: 'Unknown LED Panel',
}
digits = {
31: ['Program down', 'P-'],
68: ['AV', 'AV'],
}.items())),
-}
+ # This is most likely a generic remote control. The PCB
+ # has space for 16 buttons total, of which not all are
+ # connected. The PCB is marked "JSY", "XSK-5462", and
+ # "2014-6-12 JW". It consists of only a single IC, marked
+ # "BJEC107BNE" or similar. The following buttons are
+ # marked for the remote control of a LED panel this was
+ # found in.
+ 0xEA41: {
+ 0x10: ['Warmer', 'T+'],
+ 0x11: ['Colder', 'T-'],
+ 0x12: ['Brighter', '+'],
+ 0x13: ['Darker', '-'],
+ 0x14: ['Off', 'O'],
+ 0x15: ['On', 'I'],
+ 0x41: ['Min Brightness', 'Min'],
+ 0x48: ['Max Brightness', 'Max'],
+ },
+ 0x00: {
+ 0x45: ['Volume down', 'Vol-'],
+ 0x46: ['Play/Pause', 'P/P'],
+ 0x47: ['Volume up', 'Vol+'],
+ 0x44: ['Setup', 'Set'],
+ 0x40: ['Up', 'U'],
+ 0x43: ['Stop / Mode', 'S/M'],
+ 0x07: ['Left', 'L'],
+ 0x15: ['Enter', 'E'],
+ 0x09: ['Right', 'R'],
+ 0x16: ['0 / 10+', '0'],
+ 0x19: ['Down', 'D'],
+ 0x0D: ['Back', 'B'],
+ 0x0C: ['1', '1'],
+ 0x18: ['2', '2'],
+ 0x5E: ['3', '3'],
+ 0x08: ['4', '4'],
+ 0x1C: ['5', '5'],
+ 0x5A: ['6', '6'],
+ 0x42: ['7', '7'],
+ 0x52: ['8', '8'],
+ 0x4A: ['9', '9'],
+ }
+}