move sigrokdecode.Decoder type to its own source file

[libsigrokdecode.git] / decoders / ddc.py

diff --git a/decoders/ddc.py b/decoders/ddc.py
index 9b5bc5fdd525a053892993a8e32362c12305792d..f83909323b8b2a70d6d894f6e0db1a2ef22d91d4 100644 (file)
--- a/decoders/ddc.py
+++ b/decoders/ddc.py
@@ -17,15 +17,13 @@
 ## along with this program; if not, If not, see <http://www.gnu.org/licenses/>.
 ##
 
-#
-# DDC protocol decoder
-#
-# This decoder extracts a DDC stream from an I2C session between a computer
-# and a display device. The stream is output as plain bytes.
-#
-# Details:
-# https://en.wikipedia.org/wiki/Display_Data_Channel
-#
+'''
+This decoder extracts a DDC stream from an I2C session between a computer
+and a display device. The stream is output as plain bytes.
+
+Details:
+https://en.wikipedia.org/wiki/Display_Data_Channel
+'''
 
 import sigrokdecode as srd
 
@@ -35,8 +33,6 @@ class Decoder(srd.Decoder):
     longname = 'Display Data Channel'
     desc = 'A protocol for communication between computers and displays.'
     longdesc = ''
-    author = 'Bert Vermeulen <bert@biot.com>'
-    email = '<bert@biot.com>'
     license = 'gplv3+'
     inputs = ['i2c']
     outputs = ['ddc']
@@ -60,10 +56,10 @@ class Decoder(srd.Decoder):
 
         if self.state is None:
             # Wait for the DDC session to start.
-            if cmd in ('START', 'START_REPEAT'):
+            if cmd in ('START', 'START REPEAT'):
                 self.state = 'start'
         elif self.state == 'start':
-            if cmd == 'ADDRESS_READ' and data == 80:
+            if cmd == 'ADDRESS READ' and data == 80:
                 # 80 is the I2C slave address of a connected display,
                 # so this marks the start of the DDC data transfer.
                 self.state = 'transfer'
@@ -71,7 +67,7 @@ class Decoder(srd.Decoder):
                 # Got back to the idle state.
                 self.state = None
         elif self.state == 'transfer':
-            if cmd == 'DATA_READ':
+            if cmd == 'DATA READ':
                 # There shouldn't be anything but data reads on this
                 # address, so ignore everything else.
                 self.put(ss, es, self.out_ann, [0, ['0x%.2x' % data]])