# Hardware support '--enable' options.
AC_ARG_ENABLE(agilent-dmm, AC_HELP_STRING([--enable-agilent-dmm],
- [enable Agilent DMM driver support [default=yes]]),
+ [enable Agilent DMM support [default=yes]]),
[HW_AGILENT_DMM="$enableval"],
[HW_AGILENT_DMM=yes])
AM_CONDITIONAL(HW_AGILENT_DMM, test x$HW_AGILENT_DMM = xyes)
if test "x$HW_AGILENT_DMM" = "xyes"; then
- AC_DEFINE(HAVE_HW_AGILENT_DMM, 1, [Agilent DMM driver support])
+ AC_DEFINE(HAVE_HW_AGILENT_DMM, 1, [Agilent DMM support])
fi
# Disabled by default, unfinished.
AC_DEFINE(HAVE_LA_CHRONOVU_LA8, 1, [ChronoVu LA8 support])
fi
+AC_ARG_ENABLE(colead-slm, AC_HELP_STRING([--enable-colead-slm],
+ [enable Colead SLM support [default=yes]]),
+ [HW_COLEAD_SLM="$enableval"],
+ [HW_COLEAD_SLM=yes])
+AM_CONDITIONAL(HW_COLEAD_SLM, test x$HW_COLEAD_SLM = xyes)
+if test "x$HW_COLEAD_SLM" = "xyes"; then
+ AC_DEFINE(HAVE_HW_COLEAD_SLM, 1, [Colead SLM support])
+fi
+
+AC_ARG_ENABLE(demo, AC_HELP_STRING([--enable-demo],
+ [enable demo driver support [default=yes]]),
+ [LA_DEMO="$enableval"],
+ [LA_DEMO=yes])
+AM_CONDITIONAL(LA_DEMO, test x$LA_DEMO = xyes)
+if test "x$LA_DEMO" = "xyes"; then
+ AC_DEFINE(HAVE_LA_DEMO, 1, [Demo driver support])
+fi
+
AC_ARG_ENABLE(fluke-dmm, AC_HELP_STRING([--enable-fluke-dmm],
- [Enable Fluke DMM support. [default=yes]]),
+ [enable Fluke DMM support [default=yes]]),
[HW_FLUKE_DMM="$enableval"],
[HW_FLUKE_DMM=yes])
AM_CONDITIONAL(HW_FLUKE_DMM, test x$HW_FLUKE_DMM = xyes)
AC_DEFINE(HAVE_HW_FLUKE_DMM, 1, [Fluke DMM support])
fi
-AC_ARG_ENABLE(radioshack-dmm, AC_HELP_STRING([--enable-radioshack-dmm],
- [Enable Radio Shack DMM support. [default=yes]]),
- [HW_RADIOSHACK_DMM="$enableval"],
- [HW_RADIOSHACK_DMM=yes])
-AM_CONDITIONAL(HW_RADIOSHACK_DMM, test x$HW_RADIOSHACK_DMM = xyes)
-if test "x$HW_RADIOSHACK_DMM" = "xyes"; then
- AC_DEFINE(HAVE_HW_RADIOSHACK_DMM, 1, [Radioshack DMM support])
- fi
-
AC_ARG_ENABLE(fx2lafw, AC_HELP_STRING([--enable-fx2lafw],
[enable fx2lafw support (for FX2 LAs). [default=yes]]),
[LA_FX2LAFW="$enableval"],
AC_DEFINE(HAVE_LA_FX2LAFW, 1, [fx2lafw support])
fi
-AC_ARG_ENABLE(genericdmm, AC_HELP_STRING([--enable-genericdmm],
- [enable genericdmm support (for most DMMs). [default=yes]]),
- [HW_GENERICDMM="$enableval"],
- [HW_GENERICDMM=yes])
-AM_CONDITIONAL(HW_GENERICDMM, test x$HW_GENERICDMM = xyes)
-if test "x$HW_GENERICDMM" = "xyes"; then
- AC_DEFINE(HAVE_HW_GENERICDMM, 1, [Generic DMM support])
-fi
-
-AC_ARG_ENABLE(demo, AC_HELP_STRING([--enable-demo],
- [enable demo driver support [default=yes]]),
- [LA_DEMO="$enableval"],
- [LA_DEMO=yes])
-AM_CONDITIONAL(LA_DEMO, test x$LA_DEMO = xyes)
-if test "x$LA_DEMO" = "xyes"; then
- AC_DEFINE(HAVE_LA_DEMO, 1, [Demo driver support])
+AC_ARG_ENABLE(hantek-dso, AC_HELP_STRING([--enable-hantek-dso],
+ [enable Hantek DSO support [default=yes]]),
+ [HW_HANTEK_DSO="$enableval"],
+ [HW_HANTEK_DSO=yes])
+AM_CONDITIONAL(HW_HANTEK_DSO, test x$HW_HANTEK_DSO = xyes)
+if test "x$HW_HANTEK_DSO" = "xyes"; then
+ AC_DEFINE(HAVE_HW_HANTEK_DSO, 1, [Hantek DSO support])
fi
# Disabled by default, unfinished.
AC_DEFINE(HAVE_LA_OLS, 1, [OpenBench Logic Sniffer (OLS) support])
fi
+AC_ARG_ENABLE(radioshack-dmm, AC_HELP_STRING([--enable-radioshack-dmm],
+ [enable RadioShack DMM support [default=yes]]),
+ [HW_RADIOSHACK_DMM="$enableval"],
+ [HW_RADIOSHACK_DMM=yes])
+AM_CONDITIONAL(HW_RADIOSHACK_DMM, test x$HW_RADIOSHACK_DMM = xyes)
+if test "x$HW_RADIOSHACK_DMM" = "xyes"; then
+ AC_DEFINE(HAVE_HW_RADIOSHACK_DMM, 1, [RadioShack DMM support])
+fi
+
+AC_ARG_ENABLE(tekpower-dmm, AC_HELP_STRING([--enable-tekpower-dmm],
+ [enable TekPower DMM support [default=yes]]),
+ [HW_TEKPOWER_DMM="$enableval"],
+ [HW_TEKPOWER_DMM=yes])
+AM_CONDITIONAL(HW_TEKPOWER_DMM, test x$HW_TEKPOWER_DMM = xyes)
+if test "x$HW_TEKPOWER_DMM" = "xyes"; then
+ AC_DEFINE(HAVE_HW_TEKPOWER_DMM, 1, [TekPower DMM support])
+fi
+
+AC_ARG_ENABLE(tondaj-sl-814, AC_HELP_STRING([--enable-tondaj-sl-814],
+ [enable Tondaj SL-814 support [default=yes]]),
+ [HW_TONDAJ_SL_814="$enableval"],
+ [HW_TONDAJ_SL_814=yes])
+AM_CONDITIONAL(HW_TONDAJ_SL_814, test x$HW_TONDAJ_SL_814 = xyes)
+if test "x$HW_TONDAJ_SL_814" = "xyes"; then
+ AC_DEFINE(HAVE_HW_TONDAJ_SL_814, 1, [Tondaj SL-814 support])
+fi
+
+AC_ARG_ENABLE(uni-t-dmm, AC_HELP_STRING([--enable-uni-t-dmm],
+ [enable UNI-T DMM support [default=yes]]),
+ [HW_UNI_T_DMM="$enableval"],
+ [HW_UNI_T_DMM=yes])
+AM_CONDITIONAL(HW_UNI_T_DMM, test x$HW_UNI_T_DMM = xyes)
+if test "x$HW_UNI_T_DMM" = "xyes"; then
+ AC_DEFINE(HAVE_HW_UNI_T_DMM, 1, [UNI-T DMM support])
+fi
+
+AC_ARG_ENABLE(victor-dmm, AC_HELP_STRING([--enable-victor-dmm],
+ [enable victor-dmm support [default=yes]]),
+ [HW_VICTOR_DMM="$enableval"],
+ [HW_VICTOR_DMM=yes])
+AM_CONDITIONAL(HW_VICTOR_DMM, test x$HW_VICTOR_DMM = xyes)
+if test "x$HW_VICTOR_DMM" = "xyes"; then
+ AC_DEFINE(HAVE_HW_VICTOR_DMM, 1, [victor-dmm support])
+fi
+
AC_ARG_ENABLE(zeroplus-logic-cube,
AC_HELP_STRING([--enable-zeroplus-logic-cube],
[enable ZEROPLUS Logic Cube support [default=yes]]),
AC_DEFINE(HAVE_LA_ZEROPLUS_LOGIC_CUBE, 1, [ZEROPLUS Logic Cube support])
fi
-AC_ARG_ENABLE(hantek-dso,
- AC_HELP_STRING([--enable-hantek-dso],
- [enable Hantek DSO support [default=yes]]),
- [HW_HANTEK_DSO="$enableval"],
- [HW_HANTEK_DSO=yes])
-AM_CONDITIONAL(HW_HANTEK_DSO, test x$HW_HANTEK_DSO = xyes)
-if test "x$HW_HANTEK_DSO" = "xyes"; then
- AC_DEFINE(HAVE_HW_HANTEK_DSO, 1, [Hantek DSO support])
-fi
-
# Checks for libraries.
# This variable collects the pkg-config names of all detected libs.
# libglib-2.0 is always needed.
# Note: glib-2.0 is part of the libsigrok API (hard pkg-config requirement).
-AM_PATH_GLIB_2_0([2.28.0],
+AM_PATH_GLIB_2_0([2.32.0],
[CFLAGS="$CFLAGS $GLIB_CFLAGS"; LIBS="$LIBS $GLIB_LIBS"])
# libgthread-2.0 is always needed (e.g. for the demo hardware driver).
SR_PKGLIBS="$SR_PKGLIBS alsa"])
fi
-# EZUSB FX2 firmware helpers only needed for some hardware drivers
+# EZUSB FX2 firmware helper code is only needed for some hardware drivers.
AM_CONDITIONAL(NEED_EZUSB, \
test "x$LA_FX2LAFW" != xno \
-o "x$HW_HANTEK_DSO" != xno \
)
-# Serial port helpers only needed for some hardware drivers
+# Serial port helper code is only needed for some hardware drivers.
AM_CONDITIONAL(NEED_SERIAL, \
- test "x$LA_OLS" != xno \
- -o "x$HW_AGILENT_DMM" != xno \
- -o "x$HW_GENERICDMM" != xno \
+ test "x$HW_AGILENT_DMM" != xno \
+ -o "x$HW_COLEAD_SLM" != xno \
+ -o "x$HW_FLUKE_DMM" != xno \
+ -o "x$LA_LINK_MSO19" != xno \
+ -o "x$LA_OLS" != xno \
+ -o "x$HW_RADIOSHACK_DMM" != xno \
+ -o "x$HW_TEKPOWER_DMM" != xno \
+ -o "x$HW_TONDAJ_SL_814" != xno \
)
AC_SUBST(SR_PKGLIBS)
AC_SUBST(SR_PACKAGE_VERSION_MICRO)
AC_SUBST(SR_PACKAGE_VERSION)
-AC_CONFIG_FILES([Makefile
- version.h
- hardware/Makefile
+AC_CONFIG_FILES([Makefile version.h hardware/Makefile
hardware/agilent-dmm/Makefile
hardware/alsa/Makefile
hardware/asix-sigma/Makefile
hardware/chronovu-la8/Makefile
+ hardware/colead-slm/Makefile
hardware/common/Makefile
+ hardware/tondaj-sl-814/Makefile
+ hardware/victor-dmm/Makefile
+ hardware/common/dmm/Makefile
hardware/demo/Makefile
hardware/fluke-dmm/Makefile
- hardware/radioshack-dmm/Makefile
hardware/fx2lafw/Makefile
- hardware/genericdmm/Makefile
+ hardware/hantek-dso/Makefile
hardware/link-mso19/Makefile
hardware/openbench-logic-sniffer/Makefile
+ hardware/radioshack-dmm/Makefile
+ hardware/tekpower-dmm/Makefile
+ hardware/uni-t-dmm/Makefile
hardware/zeroplus-logic-cube/Makefile
- hardware/hantek-dso/Makefile
input/Makefile
output/Makefile
output/text/Makefile
echo " - $lib: $answer"
done
-echo
-echo "Enabled hardware drivers:"
-echo
+echo -e "\nEnabled hardware drivers:\n"
echo " - Agilent DMM..................... $HW_AGILENT_DMM"
echo " - ASIX SIGMA/SIGMA2............... $LA_ASIX_SIGMA"
echo " - ChronoVu LA8.................... $LA_CHRONOVU_LA8"
+echo " - Colead SLM...................... $HW_COLEAD_SLM"
echo " - Demo driver..................... $LA_DEMO"
echo " - Fluke DMM....................... $HW_FLUKE_DMM"
-echo " - Radioshack DMM.................. $HW_RADIOSHACK_DMM"
echo " - fx2lafw (for FX2 LAs)........... $LA_FX2LAFW"
-echo " - Generic DMM..................... $HW_GENERICDMM"
+echo " - Hantek DSO...................... $HW_HANTEK_DSO"
echo " - Link MSO-19..................... $LA_LINK_MSO19"
echo " - Openbench Logic Sniffer......... $LA_OLS"
+echo " - Radioshack DMM.................. $HW_RADIOSHACK_DMM"
+echo " - TekPower DMM.................... $HW_TEKPOWER_DMM"
+echo " - Tondaj SL-814................... $HW_TONDAJ_SL_814"
+echo " - UNI-T DMM....................... $HW_UNI_T_DMM"
+echo " - victor-dmm...................... $HW_VICTOR_DMM"
echo " - ZEROPLUS Logic Cube............. $LA_ZEROPLUS_LOGIC_CUBE"
-echo " - Hantek DSO...................... $HW_HANTEK_DSO"
echo
projects / libsigrok.git / blobdiff