- scpi-pps
- serial-dmm (including all subdrivers)
- serial-lcr (including all subdrivers)
+ - siglent-sds
- teleinfo
- testo
- tondaj-sl-814
$ sigrok-cli --driver <somedriver>:conn=/dev/ttyUSB0 ...
-The following drivers/devices require a serial port specification:
+The following drivers/devices require a serial port specification. Some of
+the drivers implement a default for the connection.
- agilent-dmm
- appa-55ii
- yokogawa-dlm (USBTMC or TCP)
- zeroplus-logic-cube
+Beyond strict serial communication over COM ports (e.g. /dev/ttyUSB0), the
+conn= property can also address specific USB devices, as well as specify TCP
+or VXI communication parameters. See these examples:
+
+ $ sigrok-cli --driver <somedriver>:conn=<vid>.<pid> ...
+ $ sigrok-cli --driver <somedriver>:conn=tcp-raw/<ipaddr>/<port> ...
+ $ sigrok-cli --driver <somedriver>:conn=vxi/<ipaddr> ...
+
+The following drivers/devices accept network communication parameters:
+
+ - hameg-hmo
+ - rigol-ds
+ - siglent-sds
+ - yokogawa-dlm
+
Specifying serial port parameters
---------------------------------
'SI232 online' (28-29S) or 'SI232 store' (22-26x). The interface must
be configured to the same baud rate as the host (default 9600).
Multimeter and interface must be configured to the same address.
+ - Metrix MX56C: Press the PRINT button to have the meter send acquisition
+ data via IR. Hold the PRINT button to adjust the meter's transmission
+ interval.
- Norma DM950: If the interface doesn't work (e.g. USB-RS232 converter), power
on the device with "FUNC" pressed (to power the interface from the DMM).
- PCE PCE-DM32: Briefly press the "RS232" button.