- automake >= 1.11
- libtool
- pkg-config >= 0.22
- - libglib >= 2.28.0
- - libusb >= 1.0.5 (for most hardware)
+ - libglib >= 2.32.0
- libzip >= 0.8
- - libftdi >= 0.16 (for some hardware)
- - libudev >= 151 (for some hardware)
+ - libusb-1.0 >= 1.0.9 (optional, used by most drivers)
+ - libftdi >= 0.16 (optional, used by some drivers)
+ - libudev >= 151 (optional, used by some drivers)
+ - libasound / alsa-lib >= 1.0 (optional, only used by the alsa driver)
+ - check >= 0.9.4 (optional, only needed to run unit tests)
Building and installing
$ make install
-Please see the following wiki pages for more detailed instructions:
+See INSTALL or the following wiki page for more (OS-specific) instructions:
- http://sigrok.org/wiki/Linux
- http://sigrok.org/wiki/Mac_OS_X
- http://sigrok.org/wiki/Windows
- http://sigrok.org/wiki/FreeBSD
+ http://sigrok.org/wiki/Building
-Firmware
---------
-
-Some devices supported by libsigrok need a firmware to be uploaded before the
-device can be used.
+Device-specific issues
+----------------------
-The default location where libsigrok expects the firmware files is:
+Please check README.devices for some notes and hints about device- or
+driver-specific issues to be aware of.
- $prefix/share/sigrok-firmware
-($prefix is usually /usr/local or /usr, depending on your ./configure options)
-
-For further information see:
+Firmware
+--------
- http://sigrok.org/wiki/Firmware
+Some devices supported by libsigrok need a firmware to be uploaded before the
+device can be used. See README.devices for details.
Mailing lists