-0.3.0 (yyyy-mm-dd)
+0.7.2 (2021-03-01)
------------------
- * TODO.
+ * Command line option changes:
+ - Add the -D|--dont-scan option.
+ - Add the --list-serial option.
+ - Add the --list-supported-wiki option (internal, developer-only).
+ - Accept multiple --config requests for multiple channel groups.
+ - Accept multiple --get requests for multiple channel groups.
+ * Protocol decoding:
+ - Add support for Google Trace Event output (JSON).
+ - Add support for float option data type (bug #1247).
+ - Perform stricter checks for integer decoder options.
+ - Accept annotation rows for -A specs.
+ - Fix memory leaks in annotation setup error paths.
+ - Add sanity check when mapping channels (bug #1515).
+ * Manpage:
+ - Fix -A description wrt default annotations shown.
+ - Clarify annotation classes in -A description.
+ - Improve/clarify documentation of the -d option.
+ * --show:
+ - Mark currently selected samplerate item in samplerates lists.
+ - Support arrays of floats, unbreaks LCR output frequency listing.
+ - Do print floating point results even if value is zero.
+ - List protocol decoder tags (if available).
+ - Synchronize --get output for MQ with --show output.
+ - Add support for -i <file> --show, provide details on input stream.
+ * --scan: Show device serial number if available.
+ * Warn about unknown input/output module option keys (bug #1549).
+ * Extend options parser, support optional ID in key-value lists.
+ * Terminate with error when -B was specified but -P is missing (bug #1180).
+ * Fix listing of some configuration options (bug #1331).
+ * Print error message when output file creation fails (bug #1372).
+ * Windows:
+ - Set stdout to binary mode on Windows as needed (bug #1427).
+ - nsis: Ship Python stdlib *.pyd files needed by some PDs (bug #1409).
+ - nsis: Install 64bit Windows programs into 'Program Files' (bug #1082).
+
+0.7.1 (2018-10-26)
+------------------
+
+ * Command line option changes:
+ - Add the --protocol-decoder-samplenum option.
+ * Scan: Fix auto-select of non-demo device, if there's only one (bug #848).
+ * Protocol decoding: Always print colon after protocol decoder ID.
+ * input:
+ - Increase chunk size to 4MB (large performance improvements).
+ - Make read from stdin work with the presence of -I specs.
+ * Manpage:
+ - Fix outdated references to -V (it's -L now).
+ - Don't list specific output formats, only mention -L.
+ - Improve decoder stacking documentation.
+ - Mention currently unsupported channel name auto-matching.
+ - Various example invocation improvements (bug #1181).
+ * Fix invalid frame limit error reporting.
+ * Bugfix in order to make sr_session_stop() actually work.
+ * Add a .desktop file and an icon.
+ * Don't unnecessarily run the 'analog' output module on data sources
+ which don't have analog channels, thus improving performance.
+ * HACKING: Prefer git pull requests over mailing list patches.
+
+0.7.0 (2017-06-12)
+------------------
+
+ * Update sigrok-cli to the new APIs from both libsigrok 0.5.0 and also
+ libsigrokdecode 0.5.0.
+ * -P <decoder> --show:
+ - List the binary output classes of the decoder.
+ - List the possible input and output IDs of the decoder.
+ * --help:
+ - Clarify that --show also lists input/output format options,
+ as well as protocol decoder options (bug #851).
+ - Show a few typical invocations of e.g. --samples/--time/--continuous.
+ * Add an -L|--list-supported option; this used to be part of -V (bug #604).
+ * Drop the superfluous -S|--protocol-decoder-stack option. Stacking can
+ be done by simply using -P and providing the decoders in the correct order.
+ * Allow multiple -P options to decode multiple stacks (bug #868).
+ * Show decoder instance IDs so the user can tell instances apart (bug #868).
+ * Show annotations based on decoder ID (not instance ID).
+ - Behaviour preserved:
+ Single PD, no -A flag => all annotations from PD
+ Single PD, -A pdid => all annotations from PD
+ Single PD, -A pdid=annX => annX from PD
+ - Behaviour now added:
+ Duplicate PDs, no -A flag => all annotations from all PDs
+ Duplicate PDs, -A pdid => all annotations from all PDs of type pdid
+ Duplicate PDs, -A pdid=annX => all annX from all PDs of type pdid
+ * Fix various memory leaks.
+ * ./configure summary: Show linker flags used.
+ * NSIS:
+ - Update to Python 3.4.x. We can't use any higher version for the time
+ being, since 3.4.x is the last version to support Windows XP.
+ - Place the example .sr files in a separate installer section.
+ - Limit example .sr files to a small set to shrink the installer size.
+ - Clarify Start menu links (e.g. "Uninstall") to avoid confusion.
+ * HACKING: Update URL to Linux kernel coding style.
+ * Fix some compiler warnings (clang).
+
+0.6.0 (2016-01-29)
+------------------
+
+ * Update sigrok-cli to the new APIs from both libsigrok 0.4.0 and also
+ libsigrokdecode 0.4.0.
+ * Updated build requirements:
+ - libglib >= 2.32.0
+ - libsigrok >= 0.4.0
+ - libsigrokdecode >= 0.4.0
+ * Fix various compiler errors/warnings.
+ * Check srd_decoder_get_by_id() output to prevent a segfault (bug #370).
+ * manpage: Document the -M and -B options.
+ * Improve option parsing code and make it more robust.
+ * Drop references to obsolete sigrok-commits mailing list.
+ * Properly handle saving logic data packets of any size.
+ * Add 'analog' output module to default output.
+ * Fix various memory leaks.
+ * Show PD annotation row members by name, not number (bug #388).
+ * Handle floating point options for output modules.
+ * If only one non-demo device is present, select it.
+ * Allow input from stdin by specifying "-i -".
+ * Support uint64 input/output module options.
+ * Command line option changes:
+ - Add the --get option.
+ - Add the -T|--transform-module option.
+ * Always save all channels to a session file (bug #410).
+ * Support boolean command line options (bug #450).
+ * NSIS:
+ - Drop libusb0.dll, we always use libusb-1.0 now.
+ - Add start menu entries for Zadig (bug #543).
+ - Install data files into a 'share' subdirectory.
+ - Various additional NSIS file improvements.
+ * Fix a runtime warning with --show (bug #520).
+ * Add "-git-<hash>" suffix to development version numbers.
+ * Fix a libzip-related issue resulting in errors writing .sr files (bug #570).
+ * Fix a unitsize related issue (bug #352).
+ * Add support for SR_T_MQLIST and SR_T_MQ.
+ * Modernize the whole autotools setup.
+
+0.5.0 (2014-05-06)
+------------------
+
+ * Update sigrok-cli to the new APIs from both libsigrok 0.3.0 and also
+ libsigrokdecode 0.3.0.
+ * Add support for the new channel groups feature in libsigrok.
+ * Report channel groups (drivers) and annotation rows (PDs) in --show.
+ * The protocol decoder output verbosity now depends on the --loglevel used.
+ * Only show the longest annotation per default if multiple are provided by
+ the PD. Higher numbers for the -l option will show them all.
+ * Allow both hex and decimal numbers as values for command-line options.
+ * Add support for an explicit "sigrok" file format option that can be
+ used with --input-format or --output-format (bug #131).
+ * If no PD annotation class is specified, default to showing all (bug #149).
+ * Fix an issue when running decoders with optional channels (bug #138).
+ * Report possible PD option values in --show output (bug #330).
+ * Allow saving of output in continuous mode (bug #122).
+ * Add support for libsigrok's SR_T_DOUBLE_RANGE config key (bug #335).
+ * Add support for config keys of type G_VARIANT_TYPE_INT32.
+ * Fix a bug which involved trying to save a file containing no data.
+ * Fix an internal probe ordering issue (bug #268).
+ * Fix various memory leak issues (bug #134, others).
+ * Fix a bug causing samplerates in session files being zero (bug #340).
+ * Fix segfault during analog acquisition without '-O analog' (bugs #90, #105).
+ * Fix a compile issue when building without libsigrokdecode (bug #351).
+ * Command line option changes:
+ - Add the -g|--channel-group option.
+ - Add the -M option (for PD meta output type support).
+ - Add the -B option (for PD binary output type support).
+ - Rename the -p|--probes option to -C|--channels.
+ * Various improvements to the NSIS file for better Windows installer support.
+ - Ship (redistributable) firmware files in the Windows installer.
+ - Ship libusb0.dll in the Windows installer (bug #243).
+ - Ship zadig.exe and zadig_xp.exe in the Windows installer.
+ - Ship all sample files from sigrok-dumps in the Windows installer.
+ - Don't ship/run the full Python MSI installer, only the required files.
+ - Fix a working directory issue in the installer.
+ * Build system:
+ - Use a non-recursive automake setup (fewer files, less clutter).
+ - configure output: Show which libs are required and which are optional.
+ * manpage: Various documentation updates.
+
+0.4.0 (2013-05-04)
+------------------
+
+ * Update sigrok-cli to the new APIs from both libsigrok 0.2.0 and also
+ libsigrokdecode 0.2.0.
+ * Add support for handling analog data sources (DMMs, scopes, dataloggers).
+ * Bugfix in the handling of -A options with arguments.
+ * Updated build dependencies list.
+ - glib (required): Now must be >= 2.28.0.
+ - libsigrok (required): Now must be >= 0.2.0.
+ - libsigrokdecode (required): Now must be >= 0.2.0.
+ * Add support for specifying input format options.
+ * Probe numbers now generally start at 0 (not 1).
+ * Command line option changes:
+ - The -D|--list-devices option was renamed to --scan.
+ - The -d|--device option was renamed to -c|--config.
+ - The -a|--protocol-decoders option was renamed to -P|--protocol-decoders.
+ - The -s|--protocol-decoder-stack option was renamed to
+ -S|--protocol-decoder-stack.
+ - Added a --driver option to specify which libsigrok driver is to be used.
+ - Added a --show option. This can show details about drivers or PDs.
+ - Added a --frames option which limits the number of frames to get from
+ a supported oscilloscope (or other frame-based device).
+ * Various documentation updates (README, manpage, and so on).
+ * configure: Don't overwrite CFLAGS, but rather amend it.
+
+0.3.1 (2012-05-30)
+------------------
+
+ * Add a ChangeLog file to the tarball.
+ * -V option: If "-l 3" or higher is used, the PD description is shown, too.
+ * -a option: Print optional/required PD probes. Example: sigrok-cli -a uart.
+ * Fix compiling with "Homebrew" (Mac OS X).
+ * Stacking order doesn't have to be specified if it's the same as the
+ PD list. Example: sigrok-cli -i <file.sr> -a i2c,edid -s i2c,edid.
+ The -s option is no longer required in this special case.
+ * Only output module or PD output goes to stdout, everything else to stderr.
+ * Improved error handling: Stop sigrok-cli upon various PD related errors.
+ * New -A | --protocol-decoder-annotations option which allows the user to
+ select which annotation types (and from which PD in the stack) to show.
+ * Update the manpage.
+ * Fix a Makefile.am bug which caused the generated ChangeLog files being
+ accidentally deleted upon 'make distclean'.
+
+0.3.0 (2012-04-17)
+------------------
+
+ * New major version, now depends on libsigrok and libsigrokdecode.
+ * Initial support for protocol decoders (written in Python >= 3).
+ Supports streaming processing, and stacking of protocol decoders.
+ Currently supported: dcf77, mx25lxx05d, i2s, spi, edid, pan1321, mlx90614,
+ rtc8564, transitioncounter, usb, i2cdemux, i2c, i2cfilter, uart.
+ * Add support for the ChronoVu LA8 logic analyzer.
+ * Add support for the ChronoVu LA8 input- and output-formats.
+ * Add support for the CSV output format.
+ * New CLI options: --loglevel, --input-format, --protocol-decoders, and
+ --protocol-decoder-stack.
+ * Changed CLI options: Rename -f|--format to -O|--output-format.
+ * Demo driver: Add all-low and all-high pattern support.
+ * Saleae Logic driver: Initial support for multiple attached devices.
+ * OLS driver: Run-Length Encoding (RLE) support.
+ * Various portability fixes for Mac OS X and MinGW/Windows.
+ * Many bugfixes, improvements, and documentation updates.
0.2.0 (2011-04-03)
------------------