+ int result;
+ while (1) {
+#ifdef __ANDROID__
+ int arg = 1;
+ result = ioctl(port->fd, TCSBRK, &arg);
+#else
+ result = tcdrain(port->fd);
+#endif
+ if (result < 0) {
+ if (errno == EINTR) {
+ DEBUG("tcdrain() was interrupted");
+ continue;
+ } else {
+ RETURN_FAIL("tcdrain() failed");
+ }
+ } else {
+ RETURN_OK();
+ }
+ }
+#endif
+}
+
+enum sp_return sp_blocking_write(struct sp_port *port, const void *buf, size_t count, unsigned int timeout)
+{
+ TRACE("%p, %p, %d, %d", port, buf, count, timeout);
+
+ CHECK_OPEN_PORT();
+
+ if (!buf)
+ RETURN_ERROR(SP_ERR_ARG, "Null buffer");
+
+ if (timeout)
+ DEBUG("Writing %d bytes to port %s, timeout %d ms", count, port->name, timeout);
+ else
+ DEBUG("Writing %d bytes to port %s, no timeout", count, port->name);
+
+ if (count == 0)
+ RETURN_VALUE("0", 0);
+
+#ifdef _WIN32
+ DWORD bytes_written = 0;
+ BOOL result;
+
+ /* Wait for previous non-blocking write to complete, if any. */
+ if (port->writing) {
+ DEBUG("Waiting for previous write to complete");
+ result = GetOverlappedResult(port->hdl, &port->write_ovl, &bytes_written, TRUE);
+ port->writing = 0;
+ if (!result)
+ RETURN_FAIL("Previous write failed to complete");
+ DEBUG("Previous write completed");
+ }
+
+ /* Set timeout. */
+ port->timeouts.WriteTotalTimeoutConstant = timeout;
+ if (SetCommTimeouts(port->hdl, &port->timeouts) == 0)
+ RETURN_FAIL("SetCommTimeouts() failed");
+
+ /* Start write. */
+ if (WriteFile(port->hdl, buf, count, NULL, &port->write_ovl) == 0) {
+ if (GetLastError() == ERROR_IO_PENDING) {
+ DEBUG("Waiting for write to complete");
+ GetOverlappedResult(port->hdl, &port->write_ovl, &bytes_written, TRUE);
+ DEBUG("Write completed, %d/%d bytes written", bytes_written, count);
+ RETURN_VALUE("%d", bytes_written);
+ } else {
+ RETURN_FAIL("WriteFile() failed");
+ }
+ } else {
+ DEBUG("Write completed immediately");
+ RETURN_VALUE("%d", count);
+ }
+#else
+ size_t bytes_written = 0;
+ unsigned char *ptr = (unsigned char *) buf;
+ struct timeval start, delta, now, end = {0, 0};
+ fd_set fds;
+ int result;
+
+ if (timeout) {
+ /* Get time at start of operation. */
+ gettimeofday(&start, NULL);
+ /* Define duration of timeout. */
+ delta.tv_sec = timeout / 1000;
+ delta.tv_usec = (timeout % 1000) * 1000;
+ /* Calculate time at which we should give up. */
+ timeradd(&start, &delta, &end);
+ }
+
+ /* Loop until we have written the requested number of bytes. */
+ while (bytes_written < count)
+ {
+ /* Wait until space is available. */
+ FD_ZERO(&fds);
+ FD_SET(port->fd, &fds);
+ if (timeout) {
+ gettimeofday(&now, NULL);
+ if (timercmp(&now, &end, >)) {
+ DEBUG("write timed out");
+ RETURN_VALUE("%d", bytes_written);
+ }
+ timersub(&end, &now, &delta);
+ }
+ result = select(port->fd + 1, NULL, &fds, NULL, timeout ? &delta : NULL);
+ if (result < 0) {
+ if (errno == EINTR) {
+ DEBUG("select() call was interrupted, repeating");
+ continue;
+ } else {
+ RETURN_FAIL("select() failed");
+ }
+ } else if (result == 0) {
+ DEBUG("write timed out");
+ RETURN_VALUE("%d", bytes_written);
+ }
+
+ /* Do write. */
+ result = write(port->fd, ptr, count - bytes_written);
+
+ if (result < 0) {
+ if (errno == EAGAIN)
+ /* This shouldn't happen because we did a select() first, but handle anyway. */
+ continue;
+ else
+ /* This is an actual failure. */
+ RETURN_FAIL("write() failed");
+ }
+
+ bytes_written += result;
+ ptr += result;
+ }
+
+ RETURN_VALUE("%d", bytes_written);
+#endif
+}
+
+enum sp_return sp_nonblocking_write(struct sp_port *port, const void *buf, size_t count)
+{
+ TRACE("%p, %p, %d", port, buf, count);
+
+ CHECK_OPEN_PORT();
+
+ if (!buf)
+ RETURN_ERROR(SP_ERR_ARG, "Null buffer");
+
+ DEBUG("Writing up to %d bytes to port %s", count, port->name);
+
+ if (count == 0)
+ RETURN_VALUE("0", 0);
+
+#ifdef _WIN32
+ DWORD written = 0;
+ BYTE *ptr = (BYTE *) buf;
+
+ /* Check whether previous write is complete. */
+ if (port->writing) {
+ if (HasOverlappedIoCompleted(&port->write_ovl)) {
+ DEBUG("Previous write completed");
+ port->writing = 0;
+ } else {
+ DEBUG("Previous write not complete");
+ /* Can't take a new write until the previous one finishes. */
+ RETURN_VALUE("0", 0);
+ }
+ }
+
+ /* Set timeout. */
+ port->timeouts.WriteTotalTimeoutConstant = 0;
+ if (SetCommTimeouts(port->hdl, &port->timeouts) == 0)
+ RETURN_FAIL("SetCommTimeouts() failed");
+
+ /* Keep writing data until the OS has to actually start an async IO for it.
+ * At that point we know the buffer is full. */
+ while (written < count)
+ {
+ /* Copy first byte of user buffer. */
+ port->pending_byte = *ptr++;
+
+ /* Start asynchronous write. */
+ if (WriteFile(port->hdl, &port->pending_byte, 1, NULL, &port->write_ovl) == 0) {
+ if (GetLastError() == ERROR_IO_PENDING) {
+ if (HasOverlappedIoCompleted(&port->write_ovl)) {
+ DEBUG("Asynchronous write completed immediately");
+ port->writing = 0;
+ written++;
+ continue;
+ } else {
+ DEBUG("Asynchronous write running");
+ port->writing = 1;
+ RETURN_VALUE("%d", ++written);
+ }
+ } else {
+ /* Actual failure of some kind. */
+ RETURN_FAIL("WriteFile() failed");
+ }
+ } else {
+ DEBUG("Single byte written immediately");
+ written++;
+ }
+ }
+
+ DEBUG("All bytes written immediately");
+
+ RETURN_VALUE("%d", written);
+#else
+ /* Returns the number of bytes written, or -1 upon failure. */
+ ssize_t written = write(port->fd, buf, count);
+
+ if (written < 0)
+ RETURN_FAIL("write() failed");
+ else
+ RETURN_VALUE("%d", written);
+#endif
+}
+
+enum sp_return sp_blocking_read(struct sp_port *port, void *buf, size_t count, unsigned int timeout)
+{
+ TRACE("%p, %p, %d, %d", port, buf, count, timeout);
+
+ CHECK_OPEN_PORT();
+
+ if (!buf)
+ RETURN_ERROR(SP_ERR_ARG, "Null buffer");
+
+ if (timeout)
+ DEBUG("Reading %d bytes from port %s, timeout %d ms", count, port->name, timeout);
+ else
+ DEBUG("Reading %d bytes from port %s, no timeout", count, port->name);
+
+ if (count == 0)
+ RETURN_VALUE("0", 0);
+
+#ifdef _WIN32
+ DWORD bytes_read = 0;
+
+ /* Set timeout. */
+ port->timeouts.ReadIntervalTimeout = 0;
+ port->timeouts.ReadTotalTimeoutConstant = timeout;
+ if (SetCommTimeouts(port->hdl, &port->timeouts) == 0)
+ RETURN_FAIL("SetCommTimeouts() failed");
+
+ /* Start read. */
+ if (ReadFile(port->hdl, buf, count, NULL, &port->read_ovl) == 0) {
+ if (GetLastError() == ERROR_IO_PENDING) {
+ DEBUG("Waiting for read to complete");
+ GetOverlappedResult(port->hdl, &port->read_ovl, &bytes_read, TRUE);
+ DEBUG("Read completed, %d/%d bytes read", bytes_read, count);
+ } else {
+ RETURN_FAIL("ReadFile() failed");
+ }
+ } else {
+ DEBUG("Read completed immediately");
+ bytes_read = count;
+ }
+
+ /* Start background operation for subsequent events. */
+ if (WaitCommEvent(port->hdl, &port->events, &port->wait_ovl) == 0) {
+ if (GetLastError() != ERROR_IO_PENDING)
+ RETURN_FAIL("WaitCommEvent() failed");
+ }
+
+ RETURN_VALUE("%d", bytes_read);
+
+#else
+ size_t bytes_read = 0;
+ unsigned char *ptr = (unsigned char *) buf;
+ struct timeval start, delta, now, end = {0, 0};
+ fd_set fds;
+ int result;
+
+ if (timeout) {
+ /* Get time at start of operation. */
+ gettimeofday(&start, NULL);
+ /* Define duration of timeout. */
+ delta.tv_sec = timeout / 1000;
+ delta.tv_usec = (timeout % 1000) * 1000;
+ /* Calculate time at which we should give up. */
+ timeradd(&start, &delta, &end);
+ }
+
+ /* Loop until we have the requested number of bytes. */
+ while (bytes_read < count)
+ {
+ /* Wait until data is available. */
+ FD_ZERO(&fds);
+ FD_SET(port->fd, &fds);
+ if (timeout) {
+ gettimeofday(&now, NULL);
+ if (timercmp(&now, &end, >))
+ /* Timeout has expired. */
+ RETURN_VALUE("%d", bytes_read);
+ timersub(&end, &now, &delta);
+ }
+ result = select(port->fd + 1, &fds, NULL, NULL, timeout ? &delta : NULL);
+ if (result < 0) {
+ if (errno == EINTR) {
+ DEBUG("select() call was interrupted, repeating");
+ continue;
+ } else {
+ RETURN_FAIL("select() failed");
+ }
+ } else if (result == 0) {
+ DEBUG("read timed out");
+ RETURN_VALUE("%d", bytes_read);
+ }
+
+ /* Do read. */
+ result = read(port->fd, ptr, count - bytes_read);
+
+ if (result < 0) {
+ if (errno == EAGAIN)
+ /* This shouldn't happen because we did a select() first, but handle anyway. */
+ continue;
+ else
+ /* This is an actual failure. */
+ RETURN_FAIL("read() failed");
+ }
+
+ bytes_read += result;
+ ptr += result;
+ }
+
+ RETURN_VALUE("%d", bytes_read);
+#endif
+}
+
+enum sp_return sp_nonblocking_read(struct sp_port *port, void *buf, size_t count)
+{
+ TRACE("%p, %p, %d", port, buf, count);
+
+ CHECK_OPEN_PORT();
+
+ if (!buf)
+ RETURN_ERROR(SP_ERR_ARG, "Null buffer");
+
+ DEBUG("Reading up to %d bytes from port %s", count, port->name);
+
+#ifdef _WIN32
+ DWORD bytes_read;
+
+ /* Set timeout. */
+ port->timeouts.ReadIntervalTimeout = MAXDWORD;
+ port->timeouts.ReadTotalTimeoutConstant = 0;
+ if (SetCommTimeouts(port->hdl, &port->timeouts) == 0)
+ RETURN_FAIL("SetCommTimeouts() failed");
+
+ /* Do read. */
+ if (ReadFile(port->hdl, buf, count, NULL, &port->read_ovl) == 0)
+ RETURN_FAIL("ReadFile() failed");
+
+ /* Get number of bytes read. */
+ if (GetOverlappedResult(port->hdl, &port->read_ovl, &bytes_read, TRUE) == 0)
+ RETURN_FAIL("GetOverlappedResult() failed");
+
+ if (bytes_read > 0) {
+ /* Start background operation for subsequent events. */
+ if (WaitCommEvent(port->hdl, &port->events, &port->wait_ovl) == 0) {
+ if (GetLastError() != ERROR_IO_PENDING)
+ RETURN_FAIL("WaitCommEvent() failed");
+ }
+ }
+
+ RETURN_VALUE("%d", bytes_read);
+#else
+ ssize_t bytes_read;
+
+ /* Returns the number of bytes read, or -1 upon failure. */
+ if ((bytes_read = read(port->fd, buf, count)) < 0) {
+ if (errno == EAGAIN)
+ /* No bytes available. */
+ bytes_read = 0;
+ else
+ /* This is an actual failure. */
+ RETURN_FAIL("read() failed");
+ }
+ RETURN_VALUE("%d", bytes_read);
+#endif
+}
+
+enum sp_return sp_input_waiting(struct sp_port *port)
+{
+ TRACE("%p", port);
+
+ CHECK_OPEN_PORT();
+
+ DEBUG("Checking input bytes waiting on port %s", port->name);
+
+#ifdef _WIN32
+ DWORD errors;
+ COMSTAT comstat;
+
+ if (ClearCommError(port->hdl, &errors, &comstat) == 0)
+ RETURN_FAIL("ClearCommError() failed");
+ RETURN_VALUE("%d", comstat.cbInQue);
+#else
+ int bytes_waiting;
+ if (ioctl(port->fd, TIOCINQ, &bytes_waiting) < 0)
+ RETURN_FAIL("TIOCINQ ioctl failed");
+ RETURN_VALUE("%d", bytes_waiting);
+#endif
+}
+
+enum sp_return sp_output_waiting(struct sp_port *port)
+{
+ TRACE("%p", port);
+
+ CHECK_OPEN_PORT();
+
+ DEBUG("Checking output bytes waiting on port %s", port->name);
+
+#ifdef _WIN32
+ DWORD errors;
+ COMSTAT comstat;
+
+ if (ClearCommError(port->hdl, &errors, &comstat) == 0)
+ RETURN_FAIL("ClearCommError() failed");
+ RETURN_VALUE("%d", comstat.cbOutQue);
+#else
+ int bytes_waiting;
+ if (ioctl(port->fd, TIOCOUTQ, &bytes_waiting) < 0)
+ RETURN_FAIL("TIOCOUTQ ioctl failed");
+ RETURN_VALUE("%d", bytes_waiting);
+#endif
+}
+
+enum sp_return sp_new_event_set(struct sp_event_set **result_ptr)
+{
+ struct sp_event_set *result;
+
+ TRACE("%p", result_ptr);
+
+ if (!result_ptr)
+ RETURN_ERROR(SP_ERR_ARG, "Null result");
+
+ *result_ptr = NULL;
+
+ if (!(result = malloc(sizeof(struct sp_event_set))))
+ RETURN_ERROR(SP_ERR_MEM, "sp_event_set malloc() failed");
+
+ memset(result, 0, sizeof(struct sp_event_set));
+
+ *result_ptr = result;
+
+ RETURN_OK();
+}
+
+static enum sp_return add_handle(struct sp_event_set *event_set,
+ event_handle handle, enum sp_event mask)
+{
+ void *new_handles;
+ enum sp_event *new_masks;
+
+ TRACE("%p, %d, %d", event_set, handle, mask);
+
+ if (!(new_handles = realloc(event_set->handles,
+ sizeof(event_handle) * (event_set->count + 1))))
+ RETURN_ERROR(SP_ERR_MEM, "handle array realloc() failed");
+
+ if (!(new_masks = realloc(event_set->masks,
+ sizeof(enum sp_event) * (event_set->count + 1))))
+ RETURN_ERROR(SP_ERR_MEM, "mask array realloc() failed");
+
+ event_set->handles = new_handles;
+ event_set->masks = new_masks;
+
+ ((event_handle *) event_set->handles)[event_set->count] = handle;
+ event_set->masks[event_set->count] = mask;
+
+ event_set->count++;
+
+ RETURN_OK();
+}
+
+enum sp_return sp_add_port_events(struct sp_event_set *event_set,
+ const struct sp_port *port, enum sp_event mask)
+{
+ TRACE("%p, %p, %d", event_set, port, mask);
+
+ if (!event_set)
+ RETURN_ERROR(SP_ERR_ARG, "Null event set");
+
+ if (!port)
+ RETURN_ERROR(SP_ERR_ARG, "Null port");
+
+ if (mask > (SP_EVENT_RX_READY | SP_EVENT_TX_READY | SP_EVENT_ERROR))
+ RETURN_ERROR(SP_ERR_ARG, "Invalid event mask");
+
+ if (!mask)
+ RETURN_OK();
+
+#ifdef _WIN32
+ enum sp_event handle_mask;
+ if ((handle_mask = mask & SP_EVENT_TX_READY))
+ TRY(add_handle(event_set, port->write_ovl.hEvent, handle_mask));
+ if ((handle_mask = mask & (SP_EVENT_RX_READY | SP_EVENT_ERROR)))
+ TRY(add_handle(event_set, port->wait_ovl.hEvent, handle_mask));
+#else
+ TRY(add_handle(event_set, port->fd, mask));
+#endif
+
+ RETURN_OK();
+}
+
+void sp_free_event_set(struct sp_event_set *event_set)
+{
+ TRACE("%p", event_set);
+
+ if (!event_set) {
+ DEBUG("Null event set");
+ RETURN();
+ }
+
+ DEBUG("Freeing event set");
+
+ if (event_set->handles)
+ free(event_set->handles);
+ if (event_set->masks)
+ free(event_set->masks);
+
+ free(event_set);
+
+ RETURN();
+}
+
+enum sp_return sp_wait(struct sp_event_set *event_set, unsigned int timeout)
+{
+ TRACE("%p, %d", event_set, timeout);
+
+ if (!event_set)
+ RETURN_ERROR(SP_ERR_ARG, "Null event set");
+
+#ifdef _WIN32
+ if (WaitForMultipleObjects(event_set->count, event_set->handles, FALSE,
+ timeout ? timeout : INFINITE) == WAIT_FAILED)
+ RETURN_FAIL("WaitForMultipleObjects() failed");
+
+ RETURN_OK();
+#else
+ struct timeval start, delta, now, end = {0, 0};
+ int result, timeout_remaining;
+ struct pollfd *pollfds;
+ unsigned int i;
+
+ if (!(pollfds = malloc(sizeof(struct pollfd) * event_set->count)))
+ RETURN_ERROR(SP_ERR_MEM, "pollfds malloc() failed");
+
+ for (i = 0; i < event_set->count; i++) {
+ pollfds[i].fd = ((int *) event_set->handles)[i];
+ pollfds[i].events = 0;
+ pollfds[i].revents = 0;
+ if (event_set->masks[i] & SP_EVENT_RX_READY)
+ pollfds[i].events |= POLLIN;
+ if (event_set->masks[i] & SP_EVENT_TX_READY)
+ pollfds[i].events |= POLLOUT;
+ if (event_set->masks[i] & SP_EVENT_ERROR)
+ pollfds[i].events |= POLLERR;
+ }
+
+ if (timeout) {
+ /* Get time at start of operation. */
+ gettimeofday(&start, NULL);
+ /* Define duration of timeout. */
+ delta.tv_sec = timeout / 1000;
+ delta.tv_usec = (timeout % 1000) * 1000;
+ /* Calculate time at which we should give up. */
+ timeradd(&start, &delta, &end);
+ }
+
+ /* Loop until an event occurs. */
+ while (1)
+ {
+ if (timeout) {
+ gettimeofday(&now, NULL);
+ if (timercmp(&now, &end, >)) {
+ DEBUG("wait timed out");
+ break;
+ }
+ timersub(&end, &now, &delta);
+ timeout_remaining = delta.tv_sec * 1000 + delta.tv_usec / 1000;
+ }
+
+ result = poll(pollfds, event_set->count, timeout ? timeout_remaining : -1);
+
+ if (result < 0) {
+ if (errno == EINTR) {
+ DEBUG("poll() call was interrupted, repeating");
+ continue;
+ } else {
+ free(pollfds);
+ RETURN_FAIL("poll() failed");
+ }
+ } else if (result == 0) {
+ DEBUG("poll() timed out");
+ break;
+ } else {
+ DEBUG("poll() completed");
+ break;
+ }
+ }
+
+ free(pollfds);
+ RETURN_OK();
+#endif
+}
+
+#ifdef USE_TERMIOS_SPEED
+static enum sp_return get_baudrate(int fd, int *baudrate)
+{
+ void *data;
+
+ TRACE("%d, %p", fd, baudrate);
+
+ DEBUG("Getting baud rate");
+
+ if (!(data = malloc(get_termios_size())))
+ RETURN_ERROR(SP_ERR_MEM, "termios malloc failed");
+
+ if (ioctl(fd, get_termios_get_ioctl(), data) < 0) {
+ free(data);
+ RETURN_FAIL("getting termios failed");
+ }
+
+ *baudrate = get_termios_speed(data);
+
+ free(data);
+
+ RETURN_OK();
+}
+
+static enum sp_return set_baudrate(int fd, int baudrate)
+{
+ void *data;
+
+ TRACE("%d, %d", fd, baudrate);
+
+ DEBUG("Getting baud rate");
+
+ if (!(data = malloc(get_termios_size())))
+ RETURN_ERROR(SP_ERR_MEM, "termios malloc failed");
+
+ if (ioctl(fd, get_termios_get_ioctl(), data) < 0) {
+ free(data);
+ RETURN_FAIL("getting termios failed");
+ }
+
+ DEBUG("Setting baud rate");
+
+ set_termios_speed(data, baudrate);
+
+ if (ioctl(fd, get_termios_set_ioctl(), data) < 0) {
+ free(data);
+ RETURN_FAIL("setting termios failed");
+ }
+
+ free(data);
+
+ RETURN_OK();
+}
+#endif /* USE_TERMIOS_SPEED */
+
+#ifdef USE_TERMIOX
+static enum sp_return get_flow(int fd, struct port_data *data)
+{
+ void *termx;
+
+ TRACE("%d, %p", fd, data);
+
+ DEBUG("Getting advanced flow control");
+
+ if (!(termx = malloc(get_termiox_size())))
+ RETURN_ERROR(SP_ERR_MEM, "termiox malloc failed");
+
+ if (ioctl(fd, TCGETX, termx) < 0) {
+ free(termx);
+ RETURN_FAIL("getting termiox failed");
+ }
+
+ get_termiox_flow(termx, &data->rts_flow, &data->cts_flow,
+ &data->dtr_flow, &data->dsr_flow);
+
+ free(termx);
+
+ RETURN_OK();
+}
+
+static enum sp_return set_flow(int fd, struct port_data *data)
+{
+ void *termx;
+
+ TRACE("%d, %p", fd, data);
+
+ DEBUG("Getting advanced flow control");
+
+ if (!(termx = malloc(get_termiox_size())))
+ RETURN_ERROR(SP_ERR_MEM, "termiox malloc failed");
+
+ if (ioctl(fd, TCGETX, termx) < 0) {
+ free(termx);
+ RETURN_FAIL("getting termiox failed");
+ }
+
+ DEBUG("Setting advanced flow control");
+
+ set_termiox_flow(termx, data->rts_flow, data->cts_flow,
+ data->dtr_flow, data->dsr_flow);
+
+ if (ioctl(fd, TCSETX, termx) < 0) {
+ free(termx);
+ RETURN_FAIL("setting termiox failed");
+ }
+
+ free(termx);
+
+ RETURN_OK();
+}
+#endif /* USE_TERMIOX */
+
+static enum sp_return get_config(struct sp_port *port, struct port_data *data,
+ struct sp_port_config *config)
+{
+ unsigned int i;
+
+ TRACE("%p, %p, %p", port, data, config);
+
+ DEBUG("Getting configuration for port %s", port->name);
+
+#ifdef _WIN32
+ if (!GetCommState(port->hdl, &data->dcb))
+ RETURN_FAIL("GetCommState() failed");
+
+ for (i = 0; i < NUM_STD_BAUDRATES; i++) {
+ if (data->dcb.BaudRate == std_baudrates[i].index) {
+ config->baudrate = std_baudrates[i].value;
+ break;
+ }
+ }
+
+ if (i == NUM_STD_BAUDRATES)
+ /* BaudRate field can be either an index or a custom baud rate. */
+ config->baudrate = data->dcb.BaudRate;
+
+ config->bits = data->dcb.ByteSize;
+
+ if (data->dcb.fParity)
+ switch (data->dcb.Parity) {
+ case NOPARITY:
+ config->parity = SP_PARITY_NONE;
+ break;
+ case ODDPARITY:
+ config->parity = SP_PARITY_ODD;
+ break;
+ case EVENPARITY:
+ config->parity = SP_PARITY_EVEN;
+ break;
+ case MARKPARITY:
+ config->parity = SP_PARITY_MARK;
+ break;
+ case SPACEPARITY:
+ config->parity = SP_PARITY_SPACE;
+ break;
+ default:
+ config->parity = -1;
+ }
+ else
+ config->parity = SP_PARITY_NONE;
+
+ switch (data->dcb.StopBits) {
+ case ONESTOPBIT:
+ config->stopbits = 1;
+ break;
+ case TWOSTOPBITS:
+ config->stopbits = 2;
+ break;
+ default:
+ config->stopbits = -1;
+ }
+
+ switch (data->dcb.fRtsControl) {
+ case RTS_CONTROL_DISABLE:
+ config->rts = SP_RTS_OFF;
+ break;
+ case RTS_CONTROL_ENABLE:
+ config->rts = SP_RTS_ON;
+ break;
+ case RTS_CONTROL_HANDSHAKE:
+ config->rts = SP_RTS_FLOW_CONTROL;
+ break;
+ default:
+ config->rts = -1;
+ }
+
+ config->cts = data->dcb.fOutxCtsFlow ? SP_CTS_FLOW_CONTROL : SP_CTS_IGNORE;
+
+ switch (data->dcb.fDtrControl) {
+ case DTR_CONTROL_DISABLE:
+ config->dtr = SP_DTR_OFF;
+ break;
+ case DTR_CONTROL_ENABLE:
+ config->dtr = SP_DTR_ON;
+ break;
+ case DTR_CONTROL_HANDSHAKE:
+ config->dtr = SP_DTR_FLOW_CONTROL;
+ break;
+ default:
+ config->dtr = -1;
+ }
+
+ config->dsr = data->dcb.fOutxDsrFlow ? SP_DSR_FLOW_CONTROL : SP_DSR_IGNORE;
+
+ if (data->dcb.fInX) {
+ if (data->dcb.fOutX)
+ config->xon_xoff = SP_XONXOFF_INOUT;
+ else
+ config->xon_xoff = SP_XONXOFF_IN;
+ } else {
+ if (data->dcb.fOutX)
+ config->xon_xoff = SP_XONXOFF_OUT;
+ else
+ config->xon_xoff = SP_XONXOFF_DISABLED;
+ }
+
+#else // !_WIN32
+
+ if (tcgetattr(port->fd, &data->term) < 0)
+ RETURN_FAIL("tcgetattr() failed");
+
+ if (ioctl(port->fd, TIOCMGET, &data->controlbits) < 0)
+ RETURN_FAIL("TIOCMGET ioctl failed");
+
+#ifdef USE_TERMIOX
+ int ret = get_flow(port->fd, data);
+
+ if (ret == SP_ERR_FAIL && errno == EINVAL)
+ data->termiox_supported = 0;
+ else if (ret < 0)
+ RETURN_CODEVAL(ret);
+ else
+ data->termiox_supported = 1;
+#else
+ data->termiox_supported = 0;
+#endif
+
+ for (i = 0; i < NUM_STD_BAUDRATES; i++) {
+ if (cfgetispeed(&data->term) == std_baudrates[i].index) {
+ config->baudrate = std_baudrates[i].value;
+ break;
+ }
+ }
+
+ if (i == NUM_STD_BAUDRATES) {
+#ifdef __APPLE__
+ config->baudrate = (int)data->term.c_ispeed;
+#elif defined(USE_TERMIOS_SPEED)
+ TRY(get_baudrate(port->fd, &config->baudrate));
+#else
+ config->baudrate = -1;
+#endif
+ }
+
+ switch (data->term.c_cflag & CSIZE) {
+ case CS8:
+ config->bits = 8;
+ break;
+ case CS7:
+ config->bits = 7;
+ break;
+ case CS6:
+ config->bits = 6;
+ break;
+ case CS5:
+ config->bits = 5;
+ break;
+ default:
+ config->bits = -1;
+ }
+
+ if (!(data->term.c_cflag & PARENB) && (data->term.c_iflag & IGNPAR))
+ config->parity = SP_PARITY_NONE;
+ else if (!(data->term.c_cflag & PARENB) || (data->term.c_iflag & IGNPAR))
+ config->parity = -1;
+#ifdef CMSPAR
+ else if (data->term.c_cflag & CMSPAR)
+ config->parity = (data->term.c_cflag & PARODD) ? SP_PARITY_MARK : SP_PARITY_SPACE;
+#endif
+ else
+ config->parity = (data->term.c_cflag & PARODD) ? SP_PARITY_ODD : SP_PARITY_EVEN;
+
+ config->stopbits = (data->term.c_cflag & CSTOPB) ? 2 : 1;
+
+ if (data->term.c_cflag & CRTSCTS) {
+ config->rts = SP_RTS_FLOW_CONTROL;
+ config->cts = SP_CTS_FLOW_CONTROL;
+ } else {
+ if (data->termiox_supported && data->rts_flow)
+ config->rts = SP_RTS_FLOW_CONTROL;
+ else
+ config->rts = (data->controlbits & TIOCM_RTS) ? SP_RTS_ON : SP_RTS_OFF;
+
+ config->cts = (data->termiox_supported && data->cts_flow) ?
+ SP_CTS_FLOW_CONTROL : SP_CTS_IGNORE;
+ }
+
+ if (data->termiox_supported && data->dtr_flow)
+ config->dtr = SP_DTR_FLOW_CONTROL;
+ else
+ config->dtr = (data->controlbits & TIOCM_DTR) ? SP_DTR_ON : SP_DTR_OFF;
+
+ config->dsr = (data->termiox_supported && data->dsr_flow) ?
+ SP_DSR_FLOW_CONTROL : SP_DSR_IGNORE;
+
+ if (data->term.c_iflag & IXOFF) {
+ if (data->term.c_iflag & IXON)
+ config->xon_xoff = SP_XONXOFF_INOUT;
+ else
+ config->xon_xoff = SP_XONXOFF_IN;
+ } else {
+ if (data->term.c_iflag & IXON)
+ config->xon_xoff = SP_XONXOFF_OUT;
+ else
+ config->xon_xoff = SP_XONXOFF_DISABLED;
+ }
+#endif
+
+ RETURN_OK();
+}
+
+static enum sp_return set_config(struct sp_port *port, struct port_data *data,
+ const struct sp_port_config *config)
+{
+ unsigned int i;
+#ifdef __APPLE__
+ BAUD_TYPE baud_nonstd;
+
+ baud_nonstd = B0;
+#endif
+#ifdef USE_TERMIOS_SPEED
+ int baud_nonstd = 0;
+#endif
+
+ TRACE("%p, %p, %p", port, data, config);
+
+ DEBUG("Setting configuration for port %s", port->name);
+
+#ifdef _WIN32
+ if (config->baudrate >= 0) {
+ for (i = 0; i < NUM_STD_BAUDRATES; i++) {
+ if (config->baudrate == std_baudrates[i].value) {
+ data->dcb.BaudRate = std_baudrates[i].index;
+ break;
+ }
+ }
+
+ if (i == NUM_STD_BAUDRATES)
+ data->dcb.BaudRate = config->baudrate;
+ }
+
+ if (config->bits >= 0)
+ data->dcb.ByteSize = config->bits;
+
+ if (config->parity >= 0) {
+ switch (config->parity) {
+ case SP_PARITY_NONE:
+ data->dcb.Parity = NOPARITY;
+ break;
+ case SP_PARITY_ODD:
+ data->dcb.Parity = ODDPARITY;
+ break;
+ case SP_PARITY_EVEN:
+ data->dcb.Parity = EVENPARITY;
+ break;
+ case SP_PARITY_MARK:
+ data->dcb.Parity = MARKPARITY;
+ break;
+ case SP_PARITY_SPACE:
+ data->dcb.Parity = SPACEPARITY;
+ break;
+ default:
+ RETURN_ERROR(SP_ERR_ARG, "Invalid parity setting");
+ }
+ }
+
+ if (config->stopbits >= 0) {
+ switch (config->stopbits) {
+ /* Note: There's also ONE5STOPBITS == 1.5 (unneeded so far). */
+ case 1:
+ data->dcb.StopBits = ONESTOPBIT;
+ break;
+ case 2:
+ data->dcb.StopBits = TWOSTOPBITS;
+ break;
+ default:
+ RETURN_ERROR(SP_ERR_ARG, "Invalid stop bit setting");
+ }
+ }
+
+ if (config->rts >= 0) {
+ switch (config->rts) {
+ case SP_RTS_OFF:
+ data->dcb.fRtsControl = RTS_CONTROL_DISABLE;
+ break;
+ case SP_RTS_ON:
+ data->dcb.fRtsControl = RTS_CONTROL_ENABLE;
+ break;
+ case SP_RTS_FLOW_CONTROL:
+ data->dcb.fRtsControl = RTS_CONTROL_HANDSHAKE;
+ break;
+ default:
+ RETURN_ERROR(SP_ERR_ARG, "Invalid RTS setting");
+ }
+ }
+
+ if (config->cts >= 0) {
+ switch (config->cts) {
+ case SP_CTS_IGNORE:
+ data->dcb.fOutxCtsFlow = FALSE;
+ break;
+ case SP_CTS_FLOW_CONTROL:
+ data->dcb.fOutxCtsFlow = TRUE;
+ break;
+ default:
+ RETURN_ERROR(SP_ERR_ARG, "Invalid CTS setting");
+ }
+ }
+
+ if (config->dtr >= 0) {
+ switch (config->dtr) {
+ case SP_DTR_OFF:
+ data->dcb.fDtrControl = DTR_CONTROL_DISABLE;
+ break;
+ case SP_DTR_ON:
+ data->dcb.fDtrControl = DTR_CONTROL_ENABLE;
+ break;
+ case SP_DTR_FLOW_CONTROL:
+ data->dcb.fDtrControl = DTR_CONTROL_HANDSHAKE;
+ break;
+ default:
+ RETURN_ERROR(SP_ERR_ARG, "Invalid DTR setting");
+ }
+ }
+
+ if (config->dsr >= 0) {
+ switch (config->dsr) {
+ case SP_DSR_IGNORE:
+ data->dcb.fOutxDsrFlow = FALSE;
+ break;
+ case SP_DSR_FLOW_CONTROL:
+ data->dcb.fOutxDsrFlow = TRUE;
+ break;
+ default:
+ RETURN_ERROR(SP_ERR_ARG, "Invalid DSR setting");
+ }
+ }
+
+ if (config->xon_xoff >= 0) {
+ switch (config->xon_xoff) {
+ case SP_XONXOFF_DISABLED:
+ data->dcb.fInX = FALSE;
+ data->dcb.fOutX = FALSE;
+ break;
+ case SP_XONXOFF_IN:
+ data->dcb.fInX = TRUE;
+ data->dcb.fOutX = FALSE;
+ break;
+ case SP_XONXOFF_OUT:
+ data->dcb.fInX = FALSE;
+ data->dcb.fOutX = TRUE;
+ break;
+ case SP_XONXOFF_INOUT:
+ data->dcb.fInX = TRUE;
+ data->dcb.fOutX = TRUE;
+ break;
+ default:
+ RETURN_ERROR(SP_ERR_ARG, "Invalid XON/XOFF setting");
+ }
+ }
+
+ if (!SetCommState(port->hdl, &data->dcb))
+ RETURN_FAIL("SetCommState() failed");
+
+#else /* !_WIN32 */
+
+ int controlbits;
+
+ if (config->baudrate >= 0) {
+ for (i = 0; i < NUM_STD_BAUDRATES; i++) {
+ if (config->baudrate == std_baudrates[i].value) {
+ if (cfsetospeed(&data->term, std_baudrates[i].index) < 0)
+ RETURN_FAIL("cfsetospeed() failed");
+
+ if (cfsetispeed(&data->term, std_baudrates[i].index) < 0)
+ RETURN_FAIL("cfsetispeed() failed");
+ break;
+ }
+ }
+
+ /* Non-standard baud rate */
+ if (i == NUM_STD_BAUDRATES) {
+#ifdef __APPLE__
+ /* Set "dummy" baud rate. */
+ if (cfsetspeed(&data->term, B9600) < 0)
+ RETURN_FAIL("cfsetspeed() failed");
+ baud_nonstd = config->baudrate;
+#elif defined(USE_TERMIOS_SPEED)
+ baud_nonstd = 1;
+#else
+ RETURN_ERROR(SP_ERR_SUPP, "Non-standard baudrate not supported");
+#endif
+ }
+ }
+
+ if (config->bits >= 0) {
+ data->term.c_cflag &= ~CSIZE;
+ switch (config->bits) {
+ case 8:
+ data->term.c_cflag |= CS8;
+ break;
+ case 7:
+ data->term.c_cflag |= CS7;
+ break;
+ case 6:
+ data->term.c_cflag |= CS6;
+ break;
+ case 5:
+ data->term.c_cflag |= CS5;
+ break;
+ default:
+ RETURN_ERROR(SP_ERR_ARG, "Invalid data bits setting");
+ }
+ }
+
+ if (config->parity >= 0) {
+ data->term.c_iflag &= ~IGNPAR;
+ data->term.c_cflag &= ~(PARENB | PARODD);
+#ifdef CMSPAR
+ data->term.c_cflag &= ~CMSPAR;
+#endif
+ switch (config->parity) {
+ case SP_PARITY_NONE:
+ data->term.c_iflag |= IGNPAR;
+ break;
+ case SP_PARITY_EVEN:
+ data->term.c_cflag |= PARENB;
+ break;
+ case SP_PARITY_ODD:
+ data->term.c_cflag |= PARENB | PARODD;
+ break;
+#ifdef CMSPAR
+ case SP_PARITY_MARK:
+ data->term.c_cflag |= PARENB | PARODD;
+ data->term.c_cflag |= CMSPAR;
+ break;
+ case SP_PARITY_SPACE:
+ data->term.c_cflag |= PARENB;
+ data->term.c_cflag |= CMSPAR;
+ break;
+#else
+ case SP_PARITY_MARK:
+ case SP_PARITY_SPACE:
+ RETURN_ERROR(SP_ERR_SUPP, "Mark/space parity not supported");
+#endif
+ default:
+ RETURN_ERROR(SP_ERR_ARG, "Invalid parity setting");
+ }
+ }
+
+ if (config->stopbits >= 0) {
+ data->term.c_cflag &= ~CSTOPB;
+ switch (config->stopbits) {
+ case 1:
+ data->term.c_cflag &= ~CSTOPB;
+ break;
+ case 2:
+ data->term.c_cflag |= CSTOPB;
+ break;
+ default:
+ RETURN_ERROR(SP_ERR_ARG, "Invalid stop bits setting");
+ }
+ }
+
+ if (config->rts >= 0 || config->cts >= 0) {
+ if (data->termiox_supported) {
+ data->rts_flow = data->cts_flow = 0;
+ switch (config->rts) {
+ case SP_RTS_OFF:
+ case SP_RTS_ON:
+ controlbits = TIOCM_RTS;
+ if (ioctl(port->fd, config->rts == SP_RTS_ON ? TIOCMBIS : TIOCMBIC, &controlbits) < 0)
+ RETURN_FAIL("Setting RTS signal level failed");
+ break;
+ case SP_RTS_FLOW_CONTROL:
+ data->rts_flow = 1;
+ break;
+ default:
+ break;
+ }
+ if (config->cts == SP_CTS_FLOW_CONTROL)
+ data->cts_flow = 1;
+
+ if (data->rts_flow && data->cts_flow)
+ data->term.c_iflag |= CRTSCTS;
+ else
+ data->term.c_iflag &= ~CRTSCTS;
+ } else {
+ /* Asymmetric use of RTS/CTS not supported. */
+ if (data->term.c_iflag & CRTSCTS) {
+ /* Flow control can only be disabled for both RTS & CTS together. */
+ if (config->rts >= 0 && config->rts != SP_RTS_FLOW_CONTROL) {
+ if (config->cts != SP_CTS_IGNORE)
+ RETURN_ERROR(SP_ERR_SUPP, "RTS & CTS flow control must be disabled together");
+ }
+ if (config->cts >= 0 && config->cts != SP_CTS_FLOW_CONTROL) {
+ if (config->rts <= 0 || config->rts == SP_RTS_FLOW_CONTROL)
+ RETURN_ERROR(SP_ERR_SUPP, "RTS & CTS flow control must be disabled together");
+ }
+ } else {
+ /* Flow control can only be enabled for both RTS & CTS together. */
+ if (((config->rts == SP_RTS_FLOW_CONTROL) && (config->cts != SP_CTS_FLOW_CONTROL)) ||
+ ((config->cts == SP_CTS_FLOW_CONTROL) && (config->rts != SP_RTS_FLOW_CONTROL)))
+ RETURN_ERROR(SP_ERR_SUPP, "RTS & CTS flow control must be enabled together");
+ }
+
+ if (config->rts >= 0) {
+ if (config->rts == SP_RTS_FLOW_CONTROL) {
+ data->term.c_iflag |= CRTSCTS;
+ } else {
+ controlbits = TIOCM_RTS;
+ if (ioctl(port->fd, config->rts == SP_RTS_ON ? TIOCMBIS : TIOCMBIC,
+ &controlbits) < 0)
+ RETURN_FAIL("Setting RTS signal level failed");
+ }
+ }
+ }
+ }
+
+ if (config->dtr >= 0 || config->dsr >= 0) {
+ if (data->termiox_supported) {
+ data->dtr_flow = data->dsr_flow = 0;
+ switch (config->dtr) {
+ case SP_DTR_OFF:
+ case SP_DTR_ON:
+ controlbits = TIOCM_DTR;
+ if (ioctl(port->fd, config->dtr == SP_DTR_ON ? TIOCMBIS : TIOCMBIC, &controlbits) < 0)
+ RETURN_FAIL("Setting DTR signal level failed");
+ break;
+ case SP_DTR_FLOW_CONTROL:
+ data->dtr_flow = 1;
+ break;
+ default:
+ break;
+ }
+ if (config->dsr == SP_DSR_FLOW_CONTROL)
+ data->dsr_flow = 1;
+ } else {
+ /* DTR/DSR flow control not supported. */
+ if (config->dtr == SP_DTR_FLOW_CONTROL || config->dsr == SP_DSR_FLOW_CONTROL)
+ RETURN_ERROR(SP_ERR_SUPP, "DTR/DSR flow control not supported");
+
+ if (config->dtr >= 0) {
+ controlbits = TIOCM_DTR;
+ if (ioctl(port->fd, config->dtr == SP_DTR_ON ? TIOCMBIS : TIOCMBIC,
+ &controlbits) < 0)
+ RETURN_FAIL("Setting DTR signal level failed");
+ }
+ }
+ }
+
+ if (config->xon_xoff >= 0) {
+ data->term.c_iflag &= ~(IXON | IXOFF | IXANY);
+ switch (config->xon_xoff) {
+ case SP_XONXOFF_DISABLED:
+ break;
+ case SP_XONXOFF_IN:
+ data->term.c_iflag |= IXOFF;
+ break;
+ case SP_XONXOFF_OUT:
+ data->term.c_iflag |= IXON | IXANY;
+ break;
+ case SP_XONXOFF_INOUT:
+ data->term.c_iflag |= IXON | IXOFF | IXANY;
+ break;
+ default:
+ RETURN_ERROR(SP_ERR_ARG, "Invalid XON/XOFF setting");
+ }
+ }