+ sp_new_config(&config);
+ sp_set_config_baudrate(config, baudrate);
+ sp_set_config_bits(config, bits);
+ switch (parity) {
+ case 0:
+ sp_set_config_parity(config, SP_PARITY_NONE);
+ break;
+ case 1:
+ sp_set_config_parity(config, SP_PARITY_EVEN);
+ break;
+ case 2:
+ sp_set_config_parity(config, SP_PARITY_ODD);
+ break;
+ default:
+ return SR_ERR_ARG;
+ }
+ sp_set_config_stopbits(config, stopbits);
+ sp_set_config_rts(config, flowcontrol == 1 ? SP_RTS_FLOW_CONTROL : rts);
+ sp_set_config_cts(config, flowcontrol == 1 ? SP_CTS_FLOW_CONTROL : SP_CTS_IGNORE);
+ sp_set_config_dtr(config, dtr);
+ sp_set_config_dsr(config, SP_DSR_IGNORE);
+ sp_set_config_xon_xoff(config, flowcontrol == 2 ? SP_XONXOFF_INOUT : SP_XONXOFF_DISABLED);
+
+ ret = sp_set_config(serial->data, config);
+ sp_free_config(config);
+
+ switch (ret) {
+ case SP_ERR_ARG:
+ sr_err("Invalid arguments for setting serial port parameters.");
+ return SR_ERR_ARG;
+ case SP_ERR_FAIL:
+ error = sp_last_error_message();
+ sr_err("Error setting serial port parameters (%d): %s.",
+ sp_last_error_code(), error);
+ sp_free_error_message(error);
+ return SR_ERR;
+ }
+
+ return SR_OK;
+}
+
+/**
+ * Set serial parameters for the specified serial port from parameter string.
+ *
+ * @param serial Previously initialized serial port structure.
+ * @param[in] paramstr A serial communication parameters string of the form
+ * "<baudrate>/<bits><parity><stopbits>{/<option>}".\n
+ * Examples: "9600/8n1", "600/7o2/dtr=1/rts=0" or "460800/8n1/flow=2".\n
+ * \<baudrate\>=integer Baud rate.\n
+ * \<bits\>=5|6|7|8 Number of data bits.\n
+ * \<parity\>=n|e|o None, even, odd.\n
+ * \<stopbits\>=1|2 One or two stop bits.\n
+ * Options:\n
+ * dtr=0|1 Set DTR off resp. on.\n
+ * flow=0|1|2 Flow control. 0 for none, 1 for RTS/CTS, 2 for XON/XOFF.\n
+ * rts=0|1 Set RTS off resp. on.\n
+ * Please note that values and combinations of these parameters must be
+ * supported by the concrete serial interface hardware and the drivers for it.
+ * @retval SR_OK Success.
+ * @retval SR_ERR Failure.
+ */
+SR_PRIV int serial_set_paramstr(struct sr_serial_dev_inst *serial,
+ const char *paramstr)