+
+/**
+ * Extract the serial device and options from the options linked list.
+ *
+ * @param options List of options passed from the command line.
+ * @param serial_device Pointer where to store the exctracted serial device.
+ * @param serial_options Pointer where to store the optional extracted serial
+ * options.
+ *
+ * @return SR_OK if a serial_device is found, SR_ERR if no device is found. The
+ * returned string should not be freed by the caller.
+ */
+SR_PRIV int sr_serial_extract_options(GSList *options, const char **serial_device,
+ const char **serial_options)
+{
+ GSList *l;
+ struct sr_config *src;
+
+ *serial_device = NULL;
+
+ for (l = options; l; l = l->next) {
+ src = l->data;
+ switch (src->key) {
+ case SR_CONF_CONN:
+ *serial_device = g_variant_get_string(src->data, NULL);
+ sr_dbg("Parsed serial device: %s", *serial_device);
+ break;
+
+ case SR_CONF_SERIALCOMM:
+ *serial_options = g_variant_get_string(src->data, NULL);
+ sr_dbg("Parsed serial options: %s", *serial_options);
+ break;
+ }
+ }
+
+ if (!*serial_device) {
+ sr_dbg("No serial device specified");
+ return SR_ERR;
+ }
+
+ return SR_OK;
+}
+
+#ifdef _WIN32
+typedef HANDLE event_handle;
+#else
+typedef int event_handle;
+#endif
+
+SR_PRIV int serial_source_add(struct sr_serial_dev_inst *serial, int events,
+ int timeout, sr_receive_data_callback_t cb, void *cb_data)
+{
+ enum sp_event mask = 0;
+ unsigned int i;
+
+ if (sp_new_event_set(&serial->event_set) != SP_OK)
+ return SR_ERR;
+
+ if (events & G_IO_IN)
+ mask |= SP_EVENT_RX_READY;
+ if (events & G_IO_OUT)
+ mask |= SP_EVENT_TX_READY;
+ if (events & G_IO_ERR)
+ mask |= SP_EVENT_ERROR;
+
+ if (sp_add_port_events(serial->event_set, serial->data, mask) != SP_OK) {
+ sp_free_event_set(serial->event_set);
+ return SR_ERR;
+ }
+
+ serial->pollfds = (GPollFD *) g_malloc0(sizeof(GPollFD) * serial->event_set->count);
+
+ for (i = 0; i < serial->event_set->count; i++) {
+
+ serial->pollfds[i].fd = ((event_handle *) serial->event_set->handles)[i];
+
+ mask = serial->event_set->masks[i];
+
+ if (mask & SP_EVENT_RX_READY)
+ serial->pollfds[i].events |= G_IO_IN;
+ if (mask & SP_EVENT_TX_READY)
+ serial->pollfds[i].events |= G_IO_OUT;
+ if (mask & SP_EVENT_ERROR)
+ serial->pollfds[i].events |= G_IO_ERR;
+
+ if (sr_session_source_add_pollfd(&serial->pollfds[i],
+ timeout, cb, cb_data) != SR_OK)
+ return SR_ERR;
+ }
+
+ return SR_OK;
+}
+
+SR_PRIV int serial_source_remove(struct sr_serial_dev_inst *serial)
+{
+ unsigned int i;
+
+ for (i = 0; i < serial->event_set->count; i++)
+ if (sr_session_source_remove_pollfd(&serial->pollfds[i]) != SR_OK)
+ return SR_ERR;
+
+ g_free(serial->pollfds);
+ sp_free_event_set(serial->event_set);
+
+ serial->pollfds = NULL;
+ serial->event_set = NULL;
+
+ return SR_OK;
+}
+
+/**
+ * Find USB serial devices via the USB vendor ID and product ID.
+ *
+ * @param vendor_id Vendor ID of the USB device.
+ * @param product_id Product ID of the USB device.
+ *
+ * @return A GSList of strings containing the path of the serial device or
+ * NULL if no serial device is found. The returned list must be freed
+ * by the caller.
+ */
+SR_PRIV GSList *sr_serial_find_usb(uint16_t vendor_id, uint16_t product_id)
+{
+#ifdef __linux__
+ const gchar *usb_dev;
+ const char device_tree[] = "/sys/bus/usb/devices/";
+ GDir *devices_dir, *device_dir;
+ GSList *l = NULL;
+ GSList *tty_devs;
+ GSList *matched_paths;
+ FILE *fd;
+ char tmp[5];
+ gchar *vendor_path, *product_path, *path_copy;
+ gchar *prefix, *subdir_path, *device_path, *tty_path;
+ unsigned long read_vendor_id, read_product_id;
+ const char *file;
+
+ l = NULL;
+ tty_devs = NULL;
+ matched_paths = NULL;
+
+ if (!(devices_dir = g_dir_open(device_tree, 0, NULL)))
+ return NULL;
+
+ /*
+ * Find potential candidates using the vendor ID and product ID
+ * and store them in matched_paths.
+ */
+ while ((usb_dev = g_dir_read_name(devices_dir))) {
+ vendor_path = g_strconcat(device_tree,
+ usb_dev, "/idVendor", NULL);
+ product_path = g_strconcat(device_tree,
+ usb_dev, "/idProduct", NULL);
+
+ if (!g_file_test(vendor_path, G_FILE_TEST_EXISTS) ||
+ !g_file_test(product_path, G_FILE_TEST_EXISTS))
+ goto skip_device;
+
+ if ((fd = g_fopen(vendor_path, "r")) == NULL)
+ goto skip_device;
+
+ if (fgets(tmp, sizeof(tmp), fd) == NULL) {
+ fclose(fd);
+ goto skip_device;
+ }
+ read_vendor_id = strtoul(tmp, NULL, 16);
+
+ fclose(fd);
+
+ if ((fd = g_fopen(product_path, "r")) == NULL)
+ goto skip_device;
+
+ if (fgets(tmp, sizeof(tmp), fd) == NULL) {
+ fclose(fd);
+ goto skip_device;
+ }
+ read_product_id = strtoul(tmp, NULL, 16);
+
+ fclose(fd);
+
+ if (vendor_id == read_vendor_id &&
+ product_id == read_product_id) {
+ path_copy = g_strdup(usb_dev);
+ matched_paths = g_slist_prepend(matched_paths,
+ path_copy);
+ }
+
+skip_device:
+ g_free(vendor_path);
+ g_free(product_path);
+ }
+ g_dir_close(devices_dir);
+
+ /* For every matched device try to find a ttyUSBX subfolder. */
+ for (l = matched_paths; l; l = l->next) {
+ subdir_path = NULL;
+
+ device_path = g_strconcat(device_tree, l->data, NULL);
+
+ if (!(device_dir = g_dir_open(device_path, 0, NULL))) {
+ g_free(device_path);
+ continue;
+ }
+
+ prefix = g_strconcat(l->data, ":", NULL);
+
+ while ((file = g_dir_read_name(device_dir))) {
+ if (g_str_has_prefix(file, prefix)) {
+ subdir_path = g_strconcat(device_path,
+ "/", file, NULL);
+ break;
+ }
+ }
+ g_dir_close(device_dir);
+
+ g_free(prefix);
+ g_free(device_path);
+
+ if (subdir_path) {
+ if (!(device_dir = g_dir_open(subdir_path, 0, NULL))) {
+ g_free(subdir_path);
+ continue;
+ }
+ g_free(subdir_path);
+
+ while ((file = g_dir_read_name(device_dir))) {
+ if (g_str_has_prefix(file, "ttyUSB")) {
+ tty_path = g_strconcat("/dev/",
+ file, NULL);
+ sr_dbg("Found USB device %04x:%04x attached to %s.",
+ vendor_id, product_id, tty_path);
+ tty_devs = g_slist_prepend(tty_devs,
+ tty_path);
+ break;
+ }
+ }
+ g_dir_close(device_dir);
+ }
+ }
+ g_slist_free_full(matched_paths, g_free);
+
+ return tty_devs;
+#else
+ (void)vendor_id;
+ (void)product_id;
+
+ return NULL;
+#endif
+}