manpage: add --protocol-decoder-jsontrace command line option

[sigrok-cli.git] / doc / sigrok-cli.1

diff --git a/doc/sigrok-cli.1 b/doc/sigrok-cli.1
index 99b14cf5b8973a9e965b829babc4893900f1fd0d..47ec5792d282e43afe751de727a4009444d6eb1c 100644 (file)
--- a/doc/sigrok-cli.1
+++ b/doc/sigrok-cli.1
@@ -51,8 +51,10 @@ Openbench Logic Sniffer:
 .RB "  $ " "sigrok\-cli \-\-driver=ols:conn=/dev/ttyACM0" " [...]"
 .sp
 Some USB devices don't use a unique VendorID/ProductID combination, and thus
 .RB "  $ " "sigrok\-cli \-\-driver=ols:conn=/dev/ttyACM0" " [...]"
 .sp
 Some USB devices don't use a unique VendorID/ProductID combination, and thus

-need that specified as well. This also uses the \fBconn\fP option, using
-either \fBVendorID.ProductID\fP or \fBbus.address\fP:
+need that specified as well. Notice that colons are used to separate the
+driver name from the \fBconn\fP option, thus colons cannot be used within the
+\fBconn\fP option's argument. To select a specific USB device, use either
+\fBVendorID.ProductID\fP or \fBbus.address\fP:

 .sp
 USB \fBVendorID.ProductID\fP example:
 .sp
 .sp
 USB \fBVendorID.ProductID\fP example:
 .sp


@@ -70,6 +72,17 @@ specification.
 .BR "\-c, \-\-config " <deviceoption>
 A colon-separated list of device options, where each option takes the form
 .BR key=value .
 .BR "\-c, \-\-config " <deviceoption>
 A colon-separated list of device options, where each option takes the form
 .BR key=value .

+Multiple occurances of the
+.B \-\-config
+option are supported.
+The first item in the list of options can take the form
+.B channel_group=<name>
+which would override the
+.B \-\-channel\-group
+specification for this list of options. Other option lists in other
+.B \-\-config
+occurances are not affected by this list's channel group name.
+.sp

 For example, to set the samplerate to 1MHz on a device supported by the
 fx2lafw driver, you might specify
 .sp
 For example, to set the samplerate to 1MHz on a device supported by the
 fx2lafw driver, you might specify
 .sp


@@ -84,6 +97,15 @@ The following are all equivalent:
 .RB "  $ " "sigrok\-cli \-d fx2lafw \-\-config samplerate=1m" " [...]"
 .sp
 .RB "  $ " "sigrok\-cli \-d fx2lafw \-\-config \(dqsamplerate=1 MHz\(dq" " [...]"
 .RB "  $ " "sigrok\-cli \-d fx2lafw \-\-config samplerate=1m" " [...]"
 .sp
 .RB "  $ " "sigrok\-cli \-d fx2lafw \-\-config \(dqsamplerate=1 MHz\(dq" " [...]"

+.sp
+These examples specify options within a channel group.
+The first two are equivalent.
+.sp
+.RB "  $ " "sigrok\-cli \-d demo \-\-channel\-group Logic \-\-config pattern=random [...]"
+.sp
+.RB "  $ " "sigrok\-cli \-d demo \-\-config channel_group=Logic:pattern=random [...]"
+.sp
+.RB "  $ " "sigrok\-cli \-d demo \-\-config samplerate=1m \-\-config channel_group=Logic:pattern=random [...]"

 .TP
 .BR "\-i, \-\-input\-file " <filename>
 Load input from a file instead of a hardware device. You can specify
 .TP
 .BR "\-i, \-\-input\-file " <filename>
 Load input from a file instead of a hardware device. You can specify


@@ -209,6 +231,17 @@ Examples:
 .RB "  $ " "sigrok\-cli \-g CH1" " [...]"
 .sp
 .RB "  $ " "sigrok\-cli \-d demo \-g Logic \-c pattern=graycode" " [...]"
 .RB "  $ " "sigrok\-cli \-g CH1" " [...]"
 .sp
 .RB "  $ " "sigrok\-cli \-d demo \-g Logic \-c pattern=graycode" " [...]"

+.sp
+Channel group specifications in
+.B \-\-get
+or
+.B \-\-config
+options take precedence over channel group names in
+.B \-\-channel\-group
+so that a single
+.B sigrok\-cli
+invocation can support the query or manipulation of multiple device options
+which reside in different channel groups.

 .TP
 .BR "\-t, \-\-triggers " <triggerlist>
 A comma-separated list of triggers to use, of the form
 .TP
 .BR "\-t, \-\-triggers " <triggerlist>
 A comma-separated list of triggers to use, of the form


@@ -259,7 +292,7 @@ Example:
  $
 .B "sigrok\-cli \-i <file.sr> "
 .br
  $
 .B "sigrok\-cli \-i <file.sr> "
 .br

-.B "              \-P uart:baudrate=115200:parity_type=odd"
+.B "              \-P uart:baudrate=115200:parity=odd"

 .sp
 The list of supported options depends entirely on the protocol decoder. Every
 protocol decoder has different options it supports.
 .sp
 The list of supported options depends entirely on the protocol decoder. Every
 protocol decoder has different options it supports.


@@ -393,6 +426,13 @@ Not every decoder generates binary output.
 When given, decoder annotations will include sample numbers, too.
 This allows consumers to receive machine readable timing information.
 .TP
 When given, decoder annotations will include sample numbers, too.
 This allows consumers to receive machine readable timing information.
 .TP

+.BR "\-\-protocol\-decoder\-ann\-class
+When given, decoder annotations will include annotation class names.
+.TP
+.BR "\-\-protocol\-decoder\-jsontrace
+When given, decoder output uses the Google Trace Event format (JSON).
+Which can be inspected in web browsers or other viewers.
+.TP

 .BR "\-l, \-\-loglevel " <level>
 Set the libsigrok and libsigrokdecode loglevel. At the moment \fBsigrok\-cli\fP
 doesn't support setting the two loglevels independently. The higher the
 .BR "\-l, \-\-loglevel " <level>
 Set the libsigrok and libsigrokdecode loglevel. At the moment \fBsigrok\-cli\fP
 doesn't support setting the two loglevels independently. The higher the


@@ -501,6 +541,20 @@ Sample continuously until stopped. Not all devices support this.
 Get the value of
 .B <variable>
 from the specified device and print it.
 Get the value of
 .B <variable>
 from the specified device and print it.

+Multiple variable names can be specified and get separated by colon.
+The list of variable names optionally can be preceeded by
+.B "channel_group=<name>"
+which would override the
+.B \-\-channel\-group
+specification.
+Multiple
+.B \-\-get
+occurances are supported in a single
+.B sigrok\-cli
+invocation.
+.sp
+ $
+.B sigrok\-cli \-d demo \-\-get samplerate:averaging \-\-get channel_group=Logic:pattern

 .TP
 .BR "\-\-set"
 Set one or more variables specified with the \fB\-\-config\fP option, without
 .TP
 .BR "\-\-set"
 Set one or more variables specified with the \fB\-\-config\fP option, without