- # Found rising or falling edge.
- if self.first_edge:
- # Throw away first detected edge as it might be mangled data.
- self.first_edge = False
- self.pulse_width = 0
- else:
- if self.state == 0:
- # Find first pulse width.
- if self.pulse_width != 0:
- self.clocks.append(self.pulse_width)
- self.state = 1
-
- elif self.state == 1:
- # Find second pulse width.
- if self.pulse_width > (self.clocks[0] * 1.3) or self.pulse_width < (self.clocks[0] * 0.7):
- self.clocks.append(self.pulse_width)
- self.state = 2
-
- elif self.state == 2:
- # Find third pulse width.
- if (self.pulse_width > (self.clocks[0] * 1.3) or self.pulse_width < (self.clocks[0] * 0.7)) \
- and (self.pulse_width > (self.clocks[1] * 1.3) or self.pulse_width < (self.clocks[1] * 0.7)):
- self.clocks.append(self.pulse_width)
- self.clocks.sort()
- self.range1 = (self.clocks[0] + self.clocks[1]) / 2
- self.range2 = (self.clocks[1] + self.clocks[2]) / 2
- spdif_bitrate = int(self.samplerate / (self.clocks[2] / 1.5))
- self.ss_edge = 0
-
- self.putx(self.ss_edge, self.samplenum, [0, \
- ['Signal Bitrate: %d Mbit/s (=> %d kHz)' % \
- (spdif_bitrate, (spdif_bitrate/ (2 * 32)))]])
-
- clock_period_nsec = 1000000000 / spdif_bitrate
-
- self.last_preamble = self.samplenum
- # We are done recovering the clock, now let's decode the data stream.
- self.state = 3
-
- elif self.state == 3:
- # Decode the stream.
- pulse = self.get_pulse_type(self.pulse_width)
-
- if self.seen_preamble:
- if pulse == 1 and self.first_one:
- self.first_one = False
- self.subframe.append([pulse, self.samplenum - self.pulse_width - 1, self.samplenum])
- elif pulse == 1 and not self.first_one:
- self.subframe[-1][2] = self.samplenum
- self.putx(self.subframe[-1][1], self.samplenum, [2, ['1']])
- self.bitcount += 1
- self.first_one = True
- else:
- self.subframe.append([pulse, self.samplenum - self.pulse_width - 1, self.samplenum])
- self.putx(self.samplenum - self.pulse_width - 1, self.samplenum, [2, ['0']])
- self.bitcount += 1
-
- if self.bitcount == 28:
- aux_audio_data = self.subframe[0:4]
- sam, sam_rot = '', ''
- for a in aux_audio_data:
- sam = sam + str(a[0])
- sam_rot = str(a[0]) + sam_rot
- sample = self.subframe[4:24]
- for s in sample:
- sam = sam + str(s[0])
- sam_rot = str(s[0]) + sam_rot
- validity = self.subframe[24:25]
- subcode_data = self.subframe[25:26]
- channel_status = self.subframe[26:27]
- parity = self.subframe[27:28]
-
- self.putx(aux_audio_data[0][1], aux_audio_data[3][2], \
- [3, ['Aux 0x%x' % int(sam, 2), '0x%x' % int(sam, 2)]])
- self.putx(sample[0][1], sample[19][2], \
- [3, ['Sample 0x%x' % int(sam, 2), '0x%x' % int(sam, 2)]])
- self.putx(aux_audio_data[0][1], sample[19][2], \
- [4, ['Audio 0x%x' % int(sam_rot, 2), '0x%x' % int(sam_rot, 2)]])
- if validity[0][0] == 0:
- self.putx(validity[0][1], validity[0][2], [5, ['V']])
- else:
- self.putx(validity[0][1], validity[0][2], [5, ['E']])
- self.putx(subcode_data[0][1], subcode_data[0][2], [6, ['S: %d' % subcode_data[0][0]]])
- self.putx(channel_status[0][1], channel_status[0][2], [7, ['C: %d' % channel_status[0][0]]])
- self.putx(parity[0][1], parity[0][2], [8, ['P: %d' % parity[0][0]]])
-
- self.subframe = []
- self.seen_preamble = False
- self.bitcount = 0
- else:
- # This is probably the start of a preamble, so go
- # ahead and decode it.
- if pulse == 2:
- self.preamble.append(self.get_pulse_type(self.pulse_width))
- self.state = 4 # Decode a preamble.
- self.ss_edge = self.samplenum - self.pulse_width - 1
-
- elif self.state == 4:
- if self.preamble_state == 0:
- self.preamble.append(self.get_pulse_type(self.pulse_width))
- self.preamble_state = 1
- elif self.preamble_state == 1:
- self.preamble.append(self.get_pulse_type(self.pulse_width))
- self.preamble_state = 2
- elif self.preamble_state == 2:
- self.preamble.append(self.get_pulse_type(self.pulse_width))
- self.preamble_state = 0
- self.state = 3
- if self.preamble == [2, 0, 1, 0]:
- self.putx(self.ss_edge, self.samplenum, [1, ['Preamble W', 'W']])
- elif self.preamble == [2, 2, 1, 1]:
- self.putx(self.ss_edge, self.samplenum, [1, ['Preamble M', 'M']])
- elif self.preamble == [2, 1, 1, 2]:
- self.putx(self.ss_edge, self.samplenum, [1, ['Preamble B', 'B']])
- else:
- self.putx(self.ss_edge, self.samplenum, [1, ['Unknown Preamble', 'Unkown Prea.', 'U']])
- self.preamble = []
- self.seen_preamble = True
- self.bitcount = 0
- self.first_one = True
-
- self.last_preamble = self.samplenum
-
- self.pulse_width = 0
-
- self.olddata = data
+ self.putx(validity[0][1], validity[0][2], [5, ['E']])
+ self.putx(subcode_data[0][1], subcode_data[0][2],
+ [6, ['S: %d' % subcode_data[0][0]]])
+ self.putx(channel_status[0][1], channel_status[0][2],
+ [7, ['C: %d' % channel_status[0][0]]])
+ self.putx(parity[0][1], parity[0][2], [8, ['P: %d' % parity[0][0]]])
+
+ self.subframe = []
+ self.seen_preamble = False
+ self.bitcount = 0
+
+ def decode_preamble(self):
+ if self.preamble_state == 0:
+ self.preamble.append(self.get_pulse_type())
+ self.preamble_state = 1
+ elif self.preamble_state == 1:
+ self.preamble.append(self.get_pulse_type())
+ self.preamble_state = 2
+ elif self.preamble_state == 2:
+ self.preamble.append(self.get_pulse_type())
+ self.preamble_state = 0
+ self.state = 'DECODE STREAM'
+ if self.preamble == [2, 0, 1, 0]:
+ self.puty([1, ['Preamble W', 'W']])
+ elif self.preamble == [2, 2, 1, 1]:
+ self.puty([1, ['Preamble M', 'M']])
+ elif self.preamble == [2, 1, 1, 2]:
+ self.puty([1, ['Preamble B', 'B']])
+ else:
+ self.puty([1, ['Unknown Preamble', 'Unknown Prea.', 'U']])
+ self.preamble = []
+ self.seen_preamble = True
+ self.bitcount = 0
+ self.first_one = True
+
+ self.last_preamble = self.samplenum
+
+ def decode(self):
+ # Set samplerate to 0 if it is not given. Decoding is still possible.
+ if not self.samplerate:
+ self.samplerate = 0
+
+ # Throw away first two edges as it might be mangled data.
+ self.wait({0: 'e'})
+ self.wait({0: 'e'})
+ self.ss_edge = 0
+ self.puty([2, ['Skip']])
+ self.ss_edge = self.samplenum
+ self.samplenum_prev_edge = self.samplenum
+
+ while True:
+ # Wait for any edge (rising or falling).
+ (data,) = self.wait({0: 'e'})
+ self.pulse_width = self.samplenum - self.samplenum_prev_edge
+ self.samplenum_prev_edge = self.samplenum