Bring various test output files up to date.

[libsigrokdecode.git] / decoders / onewire_link / __init__.py

diff --git a/decoders/onewire_link/__init__.py b/decoders/onewire_link/__init__.py
index 8846bf4e26dfcd228ddc1d65075944a7bc396597..5bd6c55e6cdfbd623aed50acbfeacde751531fd4 100644 (file)
--- a/decoders/onewire_link/__init__.py
+++ b/decoders/onewire_link/__init__.py
@@ -19,7 +19,7 @@
 ##
 
 '''
 ##
 
 '''

-1-Wire protocol decoder (link layer).
+This protocol decoder handles the 1-Wire link layer.

 
 The 1-Wire protocol enables bidirectional communication over a single wire
 (and ground) between a single master and one or multiple slaves. The protocol
 
 The 1-Wire protocol enables bidirectional communication over a single wire
 (and ground) between a single master and one or multiple slaves. The protocol


@@ -29,8 +29,6 @@ is layered:
  - Network layer (skip/search/match device ROM addresses)
  - Transport layer (transport data between 1-Wire master and device)
 
  - Network layer (skip/search/match device ROM addresses)
  - Transport layer (transport data between 1-Wire master and device)
 

-Link layer protocol details:
-

 Sample rate:
 A sufficiently high samplerate is required to properly detect all the elements
 of the protocol. A lower samplerate can be used if the master does not use
 Sample rate:
 A sufficiently high samplerate is required to properly detect all the elements
 of the protocol. A lower samplerate can be used if the master does not use


@@ -65,26 +63,6 @@ configure the following timing values (number of samplerate periods):
 
 These options should be configured only on very rare cases and the user should
 read the decoder source code to understand them correctly.
 
 These options should be configured only on very rare cases and the user should
 read the decoder source code to understand them correctly.

-
-Protocol output format:
-TODO.
-
-Annotations:
-
-Link layer annotations show the following events:
-
- - NOTE/WARNING/ERROR
-   Possible samplerate related timing issues are reported.
- - Reset/presence true/false
-   The event is marked from the signal negative edge to the end of the reset
-   high period. It's also reported if there are any devices attached to the bus.
- - Bit 0/1
-   The event is marked from the signal negative edge to the end of the data
-   slot. The value of each received bit is also provided.
-
-TODO:
-- Check for protocol correctness, if events are timed inside prescribed limits.
-- Maybe add support for interrupts, check if this feature is deprecated.

 '''
 
 from .pd import *
 '''
 
 from .pd import *