"Equivalent circuit model", NULL},
{SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE, SR_T_BOOL, "otp_active",
"Over-temperature protection active", NULL},
+ {SR_CONF_UNDER_VOLTAGE_CONDITION, SR_T_BOOL, "uvc",
+ "Under-voltage condition", NULL},
+ {SR_CONF_UNDER_VOLTAGE_CONDITION_ACTIVE, SR_T_BOOL, "uvc_active",
+ "Under-voltage condition active", NULL},
+ {SR_CONF_TRIGGER_LEVEL, SR_T_FLOAT, "triggerlevel",
+ "Trigger level", NULL},
/* Special stuff */
{SR_CONF_SESSIONFILE, SR_T_STRING, "sessionfile",
"Data source", NULL},
{SR_CONF_PROBE_FACTOR, SR_T_UINT64, "probe_factor",
"Probe factor", NULL},
+ {SR_CONF_ADC_POWERLINE_CYCLES, SR_T_FLOAT, "nplc",
+ "Number of ADC powerline cycles", NULL},
/* Acquisition modes, sample limiting */
{SR_CONF_LIMIT_MSEC, SR_T_UINT64, "limit_time",
"Sample limit", NULL},
{SR_CONF_LIMIT_FRAMES, SR_T_UINT64, "limit_frames",
"Frame limit", NULL},
- {SR_CONF_CONTINUOUS, SR_T_UINT64, "continuous",
+ {SR_CONF_CONTINUOUS, SR_T_BOOL, "continuous",
"Continuous sampling", NULL},
{SR_CONF_DATALOG, SR_T_BOOL, "datalog",
"Datalog", NULL},
{SR_MQFLAG_AVG, 0, "average", "Average", NULL},
{SR_MQFLAG_REFERENCE, 0, "reference", "Reference", NULL},
{SR_MQFLAG_UNSTABLE, 0, "unstable", "Unstable", NULL},
+ {SR_MQFLAG_FOUR_WIRE, 0, "four_wire", "4-Wire", NULL},
ALL_ZERO
};
/**
* Enumerate scan options supported by this driver.
*
- * Before calling sr_driver_scan_options(), the user must have previously
+ * Before calling sr_driver_scan_options_list(), the user must have previously
* initialized the driver by calling sr_driver_init().
*
* @param driver The driver to enumerate options for. This must be a pointer
*
* @since 0.4.0
*/
-SR_API GArray *sr_driver_scan_options(const struct sr_dev_driver *driver)
+SR_API GArray *sr_driver_scan_options_list(const struct sr_dev_driver *driver)
{
GVariant *gvar;
const uint32_t *opts;
}
}
-/** Allocate struct sr_config.
- * A floating reference can be passed in for data.
- * @private
+/**
+ * Allocate struct sr_config.
+ *
+ * A floating reference can be passed in for data.
+ *
+ * @private
*/
SR_PRIV struct sr_config *sr_config_new(uint32_t key, GVariant *data)
{
return src;
}
-/** Free struct sr_config.
- * @private
+/**
+ * Free struct sr_config.
+ *
+ * @private
*/
SR_PRIV void sr_config_free(struct sr_config *src)
{
{
const char *opstr;
const struct sr_key_info *srci;
+ gchar *tmp_str;
/* Don't log SR_CONF_DEVICE_OPTIONS, it's verbose and not too useful. */
if (key == SR_CONF_DEVICE_OPTIONS)
opstr = op == SR_CONF_GET ? "get" : op == SR_CONF_SET ? "set" : "list";
srci = sr_key_info_get(SR_KEY_CONFIG, key);
+ tmp_str = g_variant_print(data, TRUE);
sr_spew("sr_config_%s(): key %d (%s) sdi %p cg %s -> %s", opstr, key,
srci ? srci->id : "NULL", sdi, cg ? cg->name : "NULL",
- data ? g_variant_print(data, TRUE) : "NULL");
+ data ? tmp_str : "NULL");
+ g_free(tmp_str);
}
static int check_key(const struct sr_dev_driver *driver,
/**
* Query value of a configuration key at the given driver or device instance.
*
- * @param[in] driver The sr_dev_driver struct to query.
+ * @param[in] driver The sr_dev_driver struct to query. Must not be NULL.
* @param[in] sdi (optional) If the key is specific to a device, this must
* contain a pointer to the struct sr_dev_inst to be checked.
- * Otherwise it must be NULL.
+ * Otherwise it must be NULL. If sdi is != NULL, sdi->priv must
+ * also be != NULL.
* @param[in] cg The channel group on the device for which to list the
- * values, or NULL.
+ * values, or NULL.
* @param[in] key The configuration key (SR_CONF_*).
* @param[in,out] data Pointer to a GVariant where the value will be stored.
* Must not be NULL. The caller is given ownership of the GVariant
* @retval SR_OK Success.
* @retval SR_ERR Error.
* @retval SR_ERR_ARG The driver doesn't know that key, but this is not to be
- * interpreted as an error by the caller; merely as an indication
- * that it's not applicable.
+ * interpreted as an error by the caller; merely as an indication
+ * that it's not applicable.
*
* @since 0.3.0
*/
if (check_key(driver, sdi, cg, key, SR_CONF_GET, NULL) != SR_OK)
return SR_ERR_ARG;
+ if (sdi && !sdi->priv) {
+ sr_err("Can't get config (sdi != NULL, sdi->priv == NULL).");
+ return SR_ERR;
+ }
+
if ((ret = driver->config_get(key, data, sdi, cg)) == SR_OK) {
log_key(sdi, cg, key, SR_CONF_GET, *data);
/* Got a floating reference from the driver. Sink it here,
/**
* Set value of a configuration key in a device instance.
*
- * @param[in] sdi The device instance.
+ * @param[in] sdi The device instance. Must not be NULL. sdi->driver and
+ * sdi->priv must not be NULL either.
* @param[in] cg The channel group on the device for which to list the
* values, or NULL.
* @param[in] key The configuration key (SR_CONF_*).
* @retval SR_OK Success.
* @retval SR_ERR Error.
* @retval SR_ERR_ARG The driver doesn't know that key, but this is not to be
- * interpreted as an error by the caller; merely as an indication
- * that it's not applicable.
+ * interpreted as an error by the caller; merely as an indication
+ * that it's not applicable.
*
* @since 0.3.0
*/
g_variant_ref_sink(data);
- if (!sdi || !sdi->driver || !data)
+ if (!sdi || !sdi->driver || !sdi->priv || !data)
ret = SR_ERR;
else if (!sdi->driver->config_set)
ret = SR_ERR_ARG;
/**
* List all possible values for a configuration key.
*
- * @param[in] driver The sr_dev_driver struct to query.
+ * @param[in] driver The sr_dev_driver struct to query. Must not be NULL.
* @param[in] sdi (optional) If the key is specific to a device, this must
* contain a pointer to the struct sr_dev_inst to be checked.
+ * Otherwise it must be NULL. If sdi is != NULL, sdi->priv must
+ * also be != NULL.
* @param[in] cg The channel group on the device for which to list the
* values, or NULL.
* @param[in] key The configuration key (SR_CONF_*).
* @retval SR_OK Success.
* @retval SR_ERR Error.
* @retval SR_ERR_ARG The driver doesn't know that key, but this is not to be
- * interpreted as an error by the caller; merely as an indication
- * that it's not applicable.
+ * interpreted as an error by the caller; merely as an indication
+ * that it's not applicable.
*
* @since 0.3.0
*/
if (check_key(driver, sdi, cg, key, SR_CONF_LIST, NULL) != SR_OK)
return SR_ERR_ARG;
}
+ if (sdi && !sdi->priv) {
+ sr_err("Can't list config (sdi != NULL, sdi->priv == NULL).");
+ return SR_ERR;
+ }
if ((ret = driver->config_list(key, data, sdi, cg)) == SR_OK) {
log_key(sdi, cg, key, SR_CONF_LIST, *data);
g_variant_ref_sink(*data);