};
static const uint32_t devopts[] = {
- SR_CONF_CONTINUOUS | SR_CONF_SET,
+ SR_CONF_CONTINUOUS,
SR_CONF_LIMIT_SAMPLES | SR_CONF_SET,
SR_CONF_MEASURED_QUANTITY | SR_CONF_SET,
SR_CONF_ADC_POWERLINE_CYCLES | SR_CONF_SET | SR_CONF_GET,
};
-SR_PRIV struct sr_dev_driver hp_3457a_driver_info;
+static struct sr_dev_driver hp_3457a_driver_info;
static int create_front_channel(struct sr_dev_inst *sdi, int chan_idx)
{
struct sr_channel *channel;
struct sr_channel_group *front;
+ struct channel_context *chanc;
+
+ chanc = g_malloc(sizeof(*chanc));
+ chanc->location = CONN_FRONT;
channel = sr_channel_new(sdi, chan_idx++, SR_CHANNEL_ANALOG,
TRUE, "Front");
+ channel->priv = chanc;
- front = g_malloc0(sizeof(*front));
- front->name = g_strdup("Front");
+ front = sr_channel_group_new(sdi, "Front", NULL);
front->channels = g_slist_append(front->channels, channel);
- sdi->channel_groups = g_slist_append(sdi->channel_groups, front);
return chan_idx;
}
static int create_rear_channels(struct sr_dev_inst *sdi, int chan_idx,
const struct rear_card_info *card)
{
- (void) sdi;
+ unsigned int i;
+ struct sr_channel *channel;
+ struct sr_channel_group *group;
+ struct channel_context *chanc;
+ char name[16];
/* When card is NULL, we couldn't identify the type of card. */
if (!card)
return chan_idx;
- /* TODO: Create channel descriptor for plug-in cards here. */
+ group = sr_channel_group_new(sdi, card->cg_name, NULL);
+
+ for (i = 0; i < card->num_channels; i++) {
+
+ chanc = g_malloc(sizeof(*chanc));
+ chanc->location = CONN_REAR;
+
+ if (card->type == REAR_TERMINALS) {
+ chanc->index = -1;
+ g_snprintf(name, sizeof(name), "%s", card->cg_name);
+ } else {
+ chanc->index = i;
+ g_snprintf(name, sizeof(name), "%s%u", card->cg_name, i);
+ }
+
+ channel = sr_channel_new(sdi, chan_idx++, SR_CHANNEL_ANALOG,
+ FALSE, name);
+ channel->priv = chanc;
+ group->channels = g_slist_append(group->channels, channel);
+ }
+
return chan_idx;
}
struct sr_dev_inst *sdi;
struct dev_context *devc;
+ /*
+ * The device cannot get identified by means of SCPI queries.
+ * Neither shall non-SCPI requests get emitted before reliable
+ * identification of the device. Assume that we only get here
+ * when user specs led us to believe it's safe to communicate
+ * to the expected kind of device.
+ */
+
/*
* This command ensures we receive an EOI after every response, so that
* we don't wait the entire timeout after the response is received.
if ((ret != SR_OK) || !response)
return NULL;
- if (strcmp(response, "HP3457A"))
+ if (strcmp(response, "HP3457A") != 0) {
+ g_free(response);
return NULL;
+ }
g_free(response);
- devc = g_malloc0(sizeof(struct dev_context));
- sdi = g_malloc0(sizeof(struct sr_dev_inst));
+ devc = g_malloc0(sizeof(*devc));
+ sdi = g_malloc0(sizeof(*sdi));
sdi->vendor = g_strdup("Hewlett-Packard");
sdi->model = g_strdup("3457A");
sdi->version = get_revision(scpi);
return sdi;
}
-static int init(struct sr_dev_driver *di, struct sr_context *sr_ctx)
-{
- return std_init(sr_ctx, di, LOG_PREFIX);
-}
-
static GSList *scan(struct sr_dev_driver *di, GSList *options)
{
- return sr_scpi_scan(di->context, options, probe_device);
-}
+ const char *conn;
-static GSList *dev_list(const struct sr_dev_driver *di)
-{
- return ((struct drv_context *)(di->context))->instances;
-}
+ /* Only scan for a device when conn= was specified. */
+ conn = NULL;
+ (void)sr_serial_extract_options(options, &conn, NULL);
+ if (!conn)
+ return NULL;
-static int dev_clear(const struct sr_dev_driver *di)
-{
- return std_dev_clear(di, NULL);
+ return sr_scpi_scan(di->context, options, probe_device);
}
/*
if (sr_scpi_open(scpi) != SR_OK)
return SR_ERR;
- devc=sdi->priv;
+ devc = sdi->priv;
sr_scpi_send(scpi, "PRESET");
sr_scpi_send(scpi, "INBUF ON");
sr_scpi_send(scpi, "TRIG HOLD");
sr_scpi_get_float(scpi, "NPLC?", &devc->nplc);
- sdi->status = SR_ST_ACTIVE;
-
return SR_OK;
}
{
struct sr_scpi_dev_inst *scpi = sdi->conn;
- if (sdi->status != SR_ST_ACTIVE)
- return SR_ERR_DEV_CLOSED;
-
+ /* Disable scan-advance (preserve relay life). */
+ sr_scpi_send(scpi, "SADV HOLD");
/* Switch back to auto-triggering. */
sr_scpi_send(scpi, "TRIG AUTO");
sr_scpi_close(scpi);
- sdi->status = SR_ST_INACTIVE;
-
return SR_OK;
}
-static int cleanup(const struct sr_dev_driver *di)
-{
- return dev_clear(di);
-}
-
static int config_get(uint32_t key, GVariant **data,
const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
- int ret;
struct dev_context *devc;
(void)cg;
devc = sdi->priv;
- ret = SR_OK;
switch (key) {
case SR_CONF_ADC_POWERLINE_CYCLES:
*data = g_variant_new_double(devc->nplc);
return SR_ERR_NA;
}
- return ret;
+ return SR_OK;
}
static int config_set(uint32_t key, GVariant *data,
- const struct sr_dev_inst *sdi,
- const struct sr_channel_group *cg)
+ const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
- int ret;
enum sr_mq mq;
+ enum sr_mqflag mq_flags;
struct dev_context *devc;
GVariant *tuple_child;
(void)cg;
- if (sdi->status != SR_ST_ACTIVE)
- return SR_ERR_DEV_CLOSED;
-
devc = sdi->priv;
- ret = SR_OK;
switch (key) {
case SR_CONF_LIMIT_SAMPLES:
devc->limit_samples = g_variant_get_uint64(data);
case SR_CONF_MEASURED_QUANTITY:
tuple_child = g_variant_get_child_value(data, 0);
mq = g_variant_get_uint32(tuple_child);
- ret = hp_3457a_set_mq(sdi, mq);
+ tuple_child = g_variant_get_child_value(data, 1);
+ mq_flags = g_variant_get_uint64(tuple_child);
g_variant_unref(tuple_child);
- break;
+ return hp_3457a_set_mq(sdi, mq, mq_flags);
case SR_CONF_ADC_POWERLINE_CYCLES:
- ret = hp_3457a_set_nplc(sdi, g_variant_get_double(data));
- break;
+ return hp_3457a_set_nplc(sdi, g_variant_get_double(data));
default:
- ret = SR_ERR_NA;
+ return SR_ERR_NA;
}
- return ret;
+ return SR_OK;
}
static int config_list(uint32_t key, GVariant **data,
const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
- int ret;
-
- if (key == SR_CONF_SCAN_OPTIONS) {
- *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
- scanopts, ARRAY_SIZE(scanopts), sizeof(uint32_t));
- return SR_OK;
- } else if ((key == SR_CONF_DEVICE_OPTIONS) && !sdi) {
- *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
- drvopts, ARRAY_SIZE(drvopts), sizeof(uint32_t));
- return SR_OK;
- } else if ((key == SR_CONF_DEVICE_OPTIONS) && !cg) {
- *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
- devopts, ARRAY_SIZE(devopts), sizeof(uint32_t));
- return SR_OK;
- }
-
- /* From here on, we're only concerned with channel group config. */
- if (!cg)
- return SR_ERR_NA;
-
/*
* TODO: Implement channel group configuration when adding support for
* plug-in cards.
*/
- ret = SR_OK;
- switch (key) {
- default:
- ret = SR_ERR_NA;
- }
+ return STD_CONFIG_LIST(key, data, sdi, cg, scanopts, drvopts, devopts);
+}
+
+static void create_channel_index_list(GSList *channels, GArray **arr)
+{
+ struct sr_channel *channel;
+ struct channel_context *chanc;
+ GSList *list_elem;
- return ret;
+ *arr = g_array_new(FALSE, FALSE, sizeof(unsigned int));
+
+ for (list_elem = channels; list_elem; list_elem = list_elem->next) {
+ channel = list_elem->data;
+ chanc = channel->priv;
+ g_array_append_val(*arr, chanc->index);
+ }
}
/*
* reading for sample N, but a new measurement is made and when we read the
* HIRES register, it contains data for sample N+1. This would produce
* wrong readings.
+ * SADV AUTO
+ * Activate the scan-advance feature. This automatically connects the next
+ * channel in the scan list to the A/D converter. This way, we do not need to
+ * occupy the HP-IB bus to send channel select commands.
*/
-static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data)
+static int dev_acquisition_start(const struct sr_dev_inst *sdi)
{
int ret;
+ gboolean front_selected, rear_selected;
struct sr_scpi_dev_inst *scpi;
+ struct sr_channel *channel;
struct dev_context *devc;
-
- (void)cb_data;
-
- if (sdi->status != SR_ST_ACTIVE)
- return SR_ERR_DEV_CLOSED;
+ struct channel_context *chanc;
+ GArray *ch_list;
+ GSList *channels;
scpi = sdi->conn;
devc = sdi->priv;
if (ret != SR_OK)
return ret;
- std_session_send_df_header(sdi, LOG_PREFIX);
+ std_session_send_df_header(sdi);
+
+ front_selected = rear_selected = FALSE;
+ devc->active_channels = NULL;
+
+ for (channels = sdi->channels; channels; channels = channels->next) {
+ channel = channels->data;
+
+ if (!channel->enabled)
+ continue;
+
+ chanc = channel->priv;
+
+ if (chanc->location == CONN_FRONT)
+ front_selected = TRUE;
+ if (chanc->location == CONN_REAR)
+ rear_selected = TRUE;
+
+ devc->active_channels = g_slist_append(devc->active_channels, channel);
+ }
+
+ if (front_selected && rear_selected) {
+ sr_err("Can not use front and rear channels at the same time!");
+ g_slist_free(devc->active_channels);
+ return SR_ERR_ARG;
+ }
+
+ devc->num_active_channels = g_slist_length(devc->active_channels);
+ if (!devc->num_active_channels) {
+ sr_err("Need at least one active channel!");
+ g_slist_free(devc->active_channels);
+ return SR_ERR_ARG;
+ }
+ devc->current_channel = devc->active_channels->data;
+
+ hp_3457a_select_input(sdi, front_selected ? CONN_FRONT : CONN_REAR);
+
+ /* For plug-in cards, use the scan-advance features to scan channels. */
+ if (rear_selected && (devc->rear_card->card_id != REAR_TERMINALS)) {
+ create_channel_index_list(devc->active_channels, &ch_list);
+ hp_3457a_send_scan_list(sdi, (void *)ch_list->data, ch_list->len);
+ sr_scpi_send(scpi, "SADV AUTO");
+ g_array_free(ch_list, TRUE);
+ }
/* Start first measurement. */
sr_scpi_send(scpi, "TRIG SGL");
return SR_OK;
}
-static int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data)
+static int dev_acquisition_stop(struct sr_dev_inst *sdi)
{
- (void)cb_data;
+ struct dev_context *devc;
+
+ devc = sdi->priv;
- if (sdi->status != SR_ST_ACTIVE)
- return SR_ERR_DEV_CLOSED;
+ g_slist_free(devc->active_channels);
return SR_OK;
}
-SR_PRIV struct sr_dev_driver hp_3457a_driver_info = {
+static struct sr_dev_driver hp_3457a_driver_info = {
.name = "hp-3457a",
.longname = "HP 3457A",
.api_version = 1,
- .init = init,
- .cleanup = cleanup,
+ .init = std_init,
+ .cleanup = std_cleanup,
.scan = scan,
- .dev_list = dev_list,
- .dev_clear = dev_clear,
+ .dev_list = std_dev_list,
+ .dev_clear = std_dev_clear,
.config_get = config_get,
.config_set = config_set,
.config_list = config_list,
.dev_acquisition_stop = dev_acquisition_stop,
.context = NULL,
};
+SR_REGISTER_DEV_DRIVER(hp_3457a_driver_info);