* ARMFLY AX-Pro
*/
{ 0x08a9, 0x0014, "CWAV", "USBee AX", NULL,
- FIRMWARE_DIR "/fx2lafw-cwav-usbeeax.fw",
+ "fx2lafw-cwav-usbeeax.fw",
0, NULL, NULL},
/*
* CWAV USBee DX
* XZL-Studio DX
*/
{ 0x08a9, 0x0015, "CWAV", "USBee DX", NULL,
- FIRMWARE_DIR "/fx2lafw-cwav-usbeedx.fw",
+ "fx2lafw-cwav-usbeedx.fw",
DEV_CAPS_16BIT, NULL, NULL },
/*
* CWAV USBee SX
*/
{ 0x08a9, 0x0009, "CWAV", "USBee SX", NULL,
- FIRMWARE_DIR "/fx2lafw-cwav-usbeesx.fw",
+ "fx2lafw-cwav-usbeesx.fw",
0, NULL, NULL},
/* DreamSourceLab DSLogic (before FW upload) */
{ 0x2a0e, 0x0001, "DreamSourceLab", "DSLogic", NULL,
- FIRMWARE_DIR "/dreamsourcelab-dslogic-fx2.fw",
+ "dreamsourcelab-dslogic-fx2.fw",
DEV_CAPS_16BIT, NULL, NULL},
/* DreamSourceLab DSLogic (after FW upload) */
{ 0x2a0e, 0x0001, "DreamSourceLab", "DSLogic", NULL,
- FIRMWARE_DIR "/dreamsourcelab-dslogic-fx2.fw",
+ "dreamsourcelab-dslogic-fx2.fw",
DEV_CAPS_16BIT, "DreamSourceLab", "DSLogic"},
/* DreamSourceLab DSCope (before FW upload) */
{ 0x2a0e, 0x0002, "DreamSourceLab", "DSCope", NULL,
- FIRMWARE_DIR "/dreamsourcelab-dscope-fx2.fw",
+ "dreamsourcelab-dscope-fx2.fw",
DEV_CAPS_16BIT, NULL, NULL},
/* DreamSourceLab DSCope (after FW upload) */
{ 0x2a0e, 0x0002, "DreamSourceLab", "DSCope", NULL,
- FIRMWARE_DIR "/dreamsourcelab-dscope-fx2.fw",
+ "dreamsourcelab-dscope-fx2.fw",
DEV_CAPS_16BIT, "DreamSourceLab", "DSCope"},
/* DreamSourceLab DSLogic Pro (before FW upload) */
{ 0x2a0e, 0x0003, "DreamSourceLab", "DSLogic Pro", NULL,
- FIRMWARE_DIR "/dreamsourcelab-dslogic-pro-fx2.fw",
+ "dreamsourcelab-dslogic-pro-fx2.fw",
DEV_CAPS_16BIT, NULL, NULL},
/* DreamSourceLab DSLogic Pro (after FW upload) */
{ 0x2a0e, 0x0003, "DreamSourceLab", "DSLogic Pro", NULL,
- FIRMWARE_DIR "/dreamsourcelab-dslogic-pro-fx2.fw",
+ "dreamsourcelab-dslogic-pro-fx2.fw",
DEV_CAPS_16BIT, "DreamSourceLab", "DSLogic"},
/*
* Robomotic BugLogic 3
*/
{ 0x0925, 0x3881, "Saleae", "Logic", NULL,
- FIRMWARE_DIR "/fx2lafw-saleae-logic.fw",
+ "fx2lafw-saleae-logic.fw",
0, NULL, NULL},
/*
* Braintechnology USB Interface V2.x
*/
{ 0x04B4, 0x8613, "Cypress", "FX2", NULL,
- FIRMWARE_DIR "/fx2lafw-cypress-fx2.fw",
+ "fx2lafw-cypress-fx2.fw",
DEV_CAPS_16BIT, NULL, NULL },
/*
* Braintechnology USB-LPS
*/
{ 0x16d0, 0x0498, "Braintechnology", "USB-LPS", NULL,
- FIRMWARE_DIR "/fx2lafw-braintechnology-usb-lps.fw",
+ "fx2lafw-braintechnology-usb-lps.fw",
DEV_CAPS_16BIT, NULL, NULL },
- { 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+ /*
+ * sigrok FX2 based 8-channel logic analyzer
+ */
+ { 0x1d50, 0x608c, "sigrok", "FX2 LA (8ch)", NULL,
+ "fx2lafw-sigrok-fx2-8ch.fw",
+ 0, NULL, NULL},
+
+ /*
+ * sigrok FX2 based 16-channel logic analyzer
+ */
+ { 0x1d50, 0x608d, "sigrok", "FX2 LA (16ch)", NULL,
+ "fx2lafw-sigrok-fx2-16ch.fw",
+ DEV_CAPS_16BIT, NULL, NULL },
+
+ ALL_ZERO
};
static const uint32_t drvopts[] = {
sdi->conn = sr_usb_dev_inst_new(libusb_get_bus_number(devlist[i]),
libusb_get_device_address(devlist[i]), NULL);
} else {
- if (ezusb_upload_firmware(devlist[i], USB_CONFIGURATION,
- prof->firmware) == SR_OK)
+ if (ezusb_upload_firmware(drvc->sr_ctx, devlist[i],
+ USB_CONFIGURATION, prof->firmware) == SR_OK)
/* Store when this device's FW was updated. */
devc->fw_updated = g_get_monotonic_time();
else
struct sr_dev_driver *di = sdi->driver;
struct sr_usb_dev_inst *usb;
struct dev_context *devc;
- char *fpga_firmware = NULL;
+ const char *fpga_firmware = NULL;
int ret;
int64_t timediff_us, timediff_ms;
break;
case SR_CONF_CAPTURE_RATIO:
devc->capture_ratio = g_variant_get_uint64(data);
- if (devc->capture_ratio > 100) {
- devc->capture_ratio = 0;
- ret = SR_ERR;
- } else
- ret = SR_OK;
+ ret = (devc->capture_ratio > 100) ? SR_ERR : SR_OK;
break;
default:
ret = SR_ERR_NA;