* @internal
*/
+#include <config.h>
#include "protocol.h"
#define SERIALCOMM "9600/8n1"
static const uint32_t devopts[] = {
SR_CONF_POWER_SUPPLY,
- SR_CONF_OUTPUT_VOLTAGE,
- SR_CONF_OUTPUT_CURRENT,
- /* There's no SR_CONF_OUTPUT_ENABLED; can't know/set status remotely. */
- SR_CONF_OVER_CURRENT_PROTECTION_ENABLED,
+ SR_CONF_VOLTAGE | SR_CONF_SET,
+ SR_CONF_CURRENT | SR_CONF_SET,
+ SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_SET,
};
SR_PRIV struct sr_dev_driver conrad_digi_35_cpu_driver_info;
-static struct sr_dev_driver *di = &conrad_digi_35_cpu_driver_info;
-static int init(struct sr_context *sr_ctx)
+static int init(struct sr_dev_driver *di, struct sr_context *sr_ctx)
{
return std_init(sr_ctx, di, LOG_PREFIX);
}
-static GSList *scan(GSList *options)
+static GSList *scan(struct sr_dev_driver *di, GSList *options)
{
struct sr_dev_inst *sdi;
struct drv_context *drvc;
struct sr_config *src;
- struct sr_channel *ch;
struct sr_serial_dev_inst *serial;
GSList *l, *devices;
const char *conn, *serialcomm;
devices = NULL;
- drvc = di->priv;
+ drvc = di->context;
drvc->instances = NULL;
conn = serialcomm = NULL;
* the device is there.
*/
- if (!(serial = sr_serial_dev_inst_new(conn, serialcomm)))
- return NULL;
+ serial = sr_serial_dev_inst_new(conn, serialcomm);
- if (serial_open(serial, SERIAL_RDWR | SERIAL_NONBLOCK) != SR_OK)
+ if (serial_open(serial, SERIAL_RDWR) != SR_OK)
return NULL;
serial_flush(serial);
sr_spew("Conrad DIGI 35 CPU assumed at %s.", conn);
- if (!(sdi = sr_dev_inst_new(0, SR_ST_ACTIVE, "Conrad", "DIGI 35 CPU", NULL)))
- return NULL;
-
+ sdi = g_malloc0(sizeof(struct sr_dev_inst));
+ sdi->status = SR_ST_ACTIVE;
+ sdi->vendor = g_strdup("Conrad");
+ sdi->model = g_strdup("DIGI 35 CPU");
sdi->conn = serial;
sdi->priv = NULL;
sdi->driver = di;
- if (!(ch = sr_channel_new(0, SR_CHANNEL_ANALOG, TRUE, "CH1")))
- return NULL;
- sdi->channels = g_slist_append(sdi->channels, ch);
-
+ sr_channel_new(sdi, 0, SR_CHANNEL_ANALOG, TRUE, "CH1");
drvc->instances = g_slist_append(drvc->instances, sdi);
devices = g_slist_append(devices, sdi);
return devices;
}
-static GSList *dev_list(void)
+static GSList *dev_list(const struct sr_dev_driver *di)
{
- return ((struct drv_context *)(di->priv))->instances;
+ return ((struct drv_context *)(di->context))->instances;
}
-static int cleanup(void)
+static int cleanup(const struct sr_dev_driver *di)
{
return std_dev_clear(di, NULL);
}
if (sdi->status != SR_ST_ACTIVE)
return SR_ERR_DEV_CLOSED;
- ret = SR_OK;
switch (key) {
- case SR_CONF_OUTPUT_VOLTAGE:
+ case SR_CONF_VOLTAGE:
dblval = g_variant_get_double(data);
if ((dblval < 0.0) || (dblval > 35.0)) {
sr_err("Voltage out of range (0 - 35.0)!");
}
ret = send_msg1(sdi, 'V', (int) (dblval * 10 + 0.5));
break;
- case SR_CONF_OUTPUT_CURRENT:
+ case SR_CONF_CURRENT:
dblval = g_variant_get_double(data);
if ((dblval < 0.01) || (dblval > 2.55)) {
sr_err("Current out of range (0 - 2.55)!");
}
ret = send_msg1(sdi, 'C', (int) (dblval * 100 + 0.5));
break;
- /* No SR_CONF_OUTPUT_ENABLED :-( . */
case SR_CONF_OVER_CURRENT_PROTECTION_ENABLED:
if (g_variant_get_boolean(data))
ret = send_msg1(sdi, 'V', 900);
.dev_close = std_serial_dev_close,
.dev_acquisition_start = dev_acquisition_start,
.dev_acquisition_stop = dev_acquisition_stop,
- .priv = NULL,
+ .context = NULL,
};