/*
- * This file is part of the sigrok project.
+ * This file is part of the libsigrok project.
*
- * Copyright (C) 2010-2012 Bert Vermeulen <bert@biot.com>
+ * Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* The public libsigrok header file to be used by frontends.
*
* This is the only file that libsigrok users (frontends) are supposed to
- * use and #include. There are other header files which get installed with
+ * use and \#include. There are other header files which get installed with
* libsigrok, but those are not meant to be used directly by frontends.
*
* The correct way to get/use the libsigrok API functions is:
SR_ERR_ARG = -3, /**< Function argument error. */
SR_ERR_BUG = -4, /**< Errors hinting at internal bugs. */
SR_ERR_SAMPLERATE = -5, /**< Incorrect samplerate. */
+ SR_ERR_NA = -6, /**< Not applicable. */
+ SR_ERR_DEV_CLOSED = -7, /**< Device is closed, but needs to be open. */
+
+ /*
+ * Note: When adding entries here, don't forget to also update the
+ * sr_strerror() and sr_strerror_name() functions in error.c.
+ */
};
-#define SR_MAX_NUM_PROBES 64 /* Limited by uint64_t. */
#define SR_MAX_PROBENAME_LEN 32
/* Handy little macros */
#define SR_HZ(n) (n)
-#define SR_KHZ(n) ((n) * 1000)
-#define SR_MHZ(n) ((n) * 1000000)
-#define SR_GHZ(n) ((n) * 1000000000)
+#define SR_KHZ(n) ((n) * (uint64_t)(1000ULL))
+#define SR_MHZ(n) ((n) * (uint64_t)(1000000ULL))
+#define SR_GHZ(n) ((n) * (uint64_t)(1000000000ULL))
-#define SR_HZ_TO_NS(n) (1000000000 / (n))
+#define SR_HZ_TO_NS(n) ((uint64_t)(1000000000ULL) / (n))
/** libsigrok loglevels. */
enum {
SR_T_KEYVALUE,
};
-/** Rational number data type, containing numerator and denominator values. */
-struct sr_rational {
- /** Numerator of the rational number. */
- uint64_t p;
- /** Denominator of the rational number. */
- uint64_t q;
-};
-
/** Value for sr_datafeed_packet.type. */
enum {
SR_DF_HEADER = 10000,
};
struct sr_datafeed_analog {
+ /** The probes for which data is included in this packet. */
GSList *probes;
int num_samples;
/** Measured quantity (voltage, current, temperature, and so on). */
int unit;
/** Bitmap with extra information about the MQ. */
uint64_t mqflags;
- /** The analog value. */
+ /** The analog value(s). The data is interleaved according to
+ * the probes list. */
float *data;
};
+/** Input (file) format struct. */
struct sr_input {
+ /**
+ * A pointer to this input format's 'struct sr_input_format'.
+ * The frontend can use this to call the module's callbacks.
+ */
struct sr_input_format *format;
+
GHashTable *param;
+
struct sr_dev_inst *sdi;
+
void *internal;
};
struct sr_input_format {
+ /** The unique ID for this input format. Must not be NULL. */
char *id;
+
+ /**
+ * A short description of the input format, which can (for example)
+ * be displayed to the user by frontends. Must not be NULL.
+ */
char *description;
+
+ /**
+ * Check if this input module can load and parse the specified file.
+ *
+ * @param filename The name (and path) of the file to check.
+ *
+ * @return TRUE if this module knows the format, FALSE if it doesn't.
+ */
int (*format_match) (const char *filename);
- int (*init) (struct sr_input *in);
+
+ /**
+ * Initialize the input module.
+ *
+ * @param in A pointer to a valid 'struct sr_input' that the caller
+ * has to allocate and provide to this function. It is also
+ * the responsibility of the caller to free it later.
+ * @param filename The name (and path) of the file to use.
+ *
+ * @return SR_OK upon success, a negative error code upon failure.
+ */
+ int (*init) (struct sr_input *in, const char *filename);
+
+ /**
+ * Load a file, parsing the input according to the file's format.
+ *
+ * This function will send datafeed packets to the session bus, so
+ * the calling frontend must have registered its session callbacks
+ * beforehand.
+ *
+ * The packet types sent across the session bus by this function must
+ * include at least SR_DF_HEADER, SR_DF_END, and an appropriate data
+ * type such as SR_DF_LOGIC. It may also send a SR_DF_TRIGGER packet
+ * if appropriate.
+ *
+ * @param in A pointer to a valid 'struct sr_input' that the caller
+ * has to allocate and provide to this function. It is also
+ * the responsibility of the caller to free it later.
+ * @param filename The name (and path) of the file to use.
+ *
+ * @return SR_OK upon success, a negative error code upon failure.
+ */
int (*loadfile) (struct sr_input *in, const char *filename);
};
+/** Output (file) format struct. */
struct sr_output {
+ /**
+ * A pointer to this output format's 'struct sr_output_format'.
+ * The frontend can use this to call the module's callbacks.
+ */
struct sr_output_format *format;
+
+ /**
+ * The device for which this output module is creating output. This
+ * can be used by the module to find out probe names and numbers.
+ */
struct sr_dev_inst *sdi;
+
+ /**
+ * An optional parameter which the frontend can pass in to the
+ * output module. How the string is interpreted is entirely up to
+ * the module.
+ */
char *param;
+
+ /**
+ * A generic pointer which can be used by the module to keep internal
+ * state between calls into its callback functions.
+ *
+ * For example, the module might store a pointer to a chunk of output
+ * there, and only flush it when it reaches a certain size.
+ */
void *internal;
};
struct sr_output_format {
+ /**
+ * A unique ID for this output format. Must not be NULL.
+ *
+ * It can be used by frontends to select this output format for use.
+ *
+ * For example, calling sigrok-cli with <code>-O hex</code> will
+ * select the hexadecimal text output format.
+ */
char *id;
+
+ /**
+ * A short description of the output format. Must not be NULL.
+ *
+ * This can be displayed by frontends, e.g. when selecting the output
+ * format for saving a file.
+ */
char *description;
+
int df_type;
+
+ /**
+ * This function is called once, at the beginning of an output stream.
+ *
+ * The device struct will be available in the output struct passed in,
+ * as well as the param field -- which may be NULL or an empty string,
+ * if no parameter was passed.
+ *
+ * The module can use this to initialize itself, create a struct for
+ * keeping state and storing it in the <code>internal</code> field.
+ *
+ * @param o Pointer to the respective 'struct sr_output'.
+ *
+ * @return SR_OK upon success, a negative error code otherwise.
+ */
int (*init) (struct sr_output *o);
- /* Obsolete, use recv() instead. */
+
+ /**
+ * Whenever a chunk of data comes in, it will be passed to the
+ * output module via this function. The <code>data_in</code> and
+ * <code>length_in</code> values refers to this data; the module
+ * must not alter or g_free() this buffer.
+ *
+ * The function must allocate a buffer for storing its output, and
+ * pass along a pointer to this buffer in the <code>data_out</code>
+ * parameter, as well as storing the length of the buffer in
+ * <code>length_out</code>. The calling frontend will g_free()
+ * this buffer when it's done with it.
+ *
+ * IMPORTANT: The memory allocation much happen using a glib memory
+ * allocation call (not a "normal" malloc) since g_free() will be
+ * used to free the memory!
+ *
+ * If there is no output, this function MUST store NULL in the
+ * <code>data_out</code> parameter, so the caller knows not to try
+ * and g_free() it.
+ *
+ * Note: This API call is obsolete, use receive() instead.
+ *
+ * @param o Pointer to the respective 'struct sr_output'.
+ * @param data_in Pointer to the input data buffer.
+ * @param length_in Length of the input.
+ * @param data_out Pointer to the allocated output buffer.
+ * @param length_out Length (in bytes) of the output.
+ *
+ * @return SR_OK upon success, a negative error code otherwise.
+ */
int (*data) (struct sr_output *o, const uint8_t *data_in,
uint64_t length_in, uint8_t **data_out,
uint64_t *length_out);
- /* Obsolete, use recv() instead. */
+
+ /**
+ * This function is called when an event occurs in the datafeed
+ * which the output module may need to be aware of. No data is
+ * passed in, only the fact that the event occurs. The following
+ * events can currently be passed in:
+ *
+ * - SR_DF_TRIGGER: At this point in the datafeed, the trigger
+ * matched. The output module may mark this in some way, e.g. by
+ * plotting a red line on a graph.
+ *
+ * - SR_DF_END: This marks the end of the datafeed. No more calls
+ * into the output module will be done, so this is a good time to
+ * free up any memory used to keep state, for example.
+ *
+ * Any output generated by this function must have a reference to
+ * it stored in the <code>data_out</code> and <code>length_out</code>
+ * parameters, or NULL if no output was generated.
+ *
+ * Note: This API call is obsolete, use receive() instead.
+ *
+ * @param o Pointer to the respective 'struct sr_output'.
+ * @param event_type Type of event that occured.
+ * @param data_out Pointer to the allocated output buffer.
+ * @param length_out Length (in bytes) of the output.
+ *
+ * @return SR_OK upon success, a negative error code otherwise.
+ */
int (*event) (struct sr_output *o, int event_type, uint8_t **data_out,
- uint64_t *length_out);
- GString *(*recv) (struct sr_output *o, const struct sr_dev_inst *sdi,
- const struct sr_datafeed_packet *packet);
+ uint64_t *length_out);
+
+ /**
+ * This function is passed a copy of every packed in the data feed.
+ * Any output generated by the output module in response to the
+ * packet should be returned in a newly allocated GString
+ * <code>out</code>, which will be freed by the caller.
+ *
+ * Packets not of interest to the output module can just be ignored,
+ * and the <code>out</code> parameter set to NULL.
+ *
+ * @param o Pointer to the respective 'struct sr_output'.
+ * @param sdi The device instance that generated the packet.
+ * @param packet The complete packet.
+ * @param out A pointer where a GString * should be stored if
+ * the module generates output, or NULL if not.
+ *
+ * @return SR_OK upon success, a negative error code otherwise.
+ */
+ int (*receive) (struct sr_output *o, const struct sr_dev_inst *sdi,
+ const struct sr_datafeed_packet *packet, GString **out);
+
+ /**
+ * This function is called after the caller is finished using
+ * the output module, and can be used to free any internal
+ * resources the module may keep.
+ *
+ * @return SR_OK upon success, a negative error code otherwise.
+ */
int (*cleanup) (struct sr_output *o);
};
struct sr_config {
int key;
- const void *value;
+ GVariant *data;
};
struct sr_config_info {
/*--- Device configuration ------------------------------------------*/
- /** The device supports setting/changing its samplerate. */
+ /** The device supports setting its samplerate, in Hz. */
SR_CONF_SAMPLERATE = 30000,
/** The device supports setting a pre/post-trigger capture ratio. */
/** Trigger types. */
SR_CONF_TRIGGER_TYPE,
+ /** The device supports setting its sample interval, in ms. */
+ SR_CONF_SAMPLE_INTERVAL,
+
+ /** Number of timebases, as related to SR_CONF_TIMEBASE. */
+ SR_CONF_NUM_TIMEBASE,
+
+ /** Number of vertical divisions, as related to SR_CONF_VDIV. */
+ SR_CONF_NUM_VDIV,
+
/*--- Special stuff -------------------------------------------------*/
/** Scan options supported by the driver. */
- SR_CONF_SCAN_OPTIONS,
+ SR_CONF_SCAN_OPTIONS = 40000,
/** Device options for a particular device. */
SR_CONF_DEVICE_OPTIONS,
/** Session filename. */
- SR_CONF_SESSIONFILE = 40000,
+ SR_CONF_SESSIONFILE,
- /* TODO: Better description. */
/** The device supports specifying a capturefile to inject. */
SR_CONF_CAPTUREFILE,
- /* TODO: Better description. */
/** The device supports specifying the capturefile unit size. */
SR_CONF_CAPTURE_UNITSIZE,
- /* TODO: Better description. */
/** The device supports setting the number of probes. */
SR_CONF_CAPTURE_NUM_PROBES,
* samples continuously, until explicitly stopped by a certain command.
*/
SR_CONF_CONTINUOUS,
+
+ /** The device has internal storage, into which data is logged. This
+ * starts or stops the internal logging. */
+ SR_CONF_DATALOG,
};
struct sr_dev_inst {
char *model;
char *version;
GSList *probes;
+ void *conn;
void *priv;
};
SR_ST_STOPPING,
};
-/*
- * A device supports either a range of samplerates with steps of a given
- * granularity, or is limited to a set of defined samplerates. Use either
- * step or list, but not both.
- */
-struct sr_samplerates {
- uint64_t low;
- uint64_t high;
- uint64_t step;
- const uint64_t *list;
-};
-
struct sr_dev_driver {
/* Driver-specific */
char *name;
GSList *(*scan) (GSList *options);
GSList *(*dev_list) (void);
int (*dev_clear) (void);
- int (*config_get) (int id, const void **value,
+ int (*config_get) (int id, GVariant **data,
const struct sr_dev_inst *sdi);
- int (*config_set) (int id, const void *value,
+ int (*config_set) (int id, GVariant *data,
const struct sr_dev_inst *sdi);
- int (*config_list) (int info_id, const void **data,
+ int (*config_list) (int info_id, GVariant **data,
const struct sr_dev_inst *sdi);
/* Device-specific */
struct sr_session {
/** List of struct sr_dev pointers. */
GSList *devs;
- /** List of sr_receive_data_callback_t items. */
+ /** List of struct datafeed_callback pointers. */
GSList *datafeed_callbacks;
GTimeVal starttime;
struct source *sources;
GPollFD *pollfds;
int source_timeout;
+
+ /*
+ * These are our synchronization primitives for stopping the session in
+ * an async fashion. We need to make sure the session is stopped from
+ * within the session thread itself.
+ */
+ GMutex stop_mutex;
+ gboolean abort_session;
};
#include "proto.h"