/** Status/error codes returned by libsigrok functions. */
enum sr_error_code {
- SR_OK_CONTINUE = 1, /**< Keep going. */
SR_OK = 0, /**< No error. */
SR_ERR = -1, /**< Generic/unspecified error. */
SR_ERR_MALLOC = -2, /**< Malloc/calloc/realloc error. */
SR_ERR_DATA =-10, /**< Data is invalid. */
SR_ERR_IO =-11, /**< Input/output error. */
- /*
- * Note: When adding entries here, don't forget to also update the
- * sr_strerror() and sr_strerror_name() functions in error.c.
- */
+ /* Update sr_strerror()/sr_strerror_name() (error.c) upon changes! */
};
#define SR_MAX_CHANNELNAME_LEN 32
SR_T_UINT64_RANGE,
SR_T_DOUBLE_RANGE,
SR_T_INT32,
+ SR_T_MQ,
+
+ /* Update sr_variant_type_get() (hwdriver.c) upon changes! */
};
/** Value for sr_datafeed_packet.type. */
SR_DF_TRIGGER,
/** Payload is struct sr_datafeed_logic. */
SR_DF_LOGIC,
- /** Payload is struct sr_datafeed_analog. */
- SR_DF_ANALOG,
+ /** DEPRECATED! Use SR_DF_ANALOG instead. */
+ SR_DF_ANALOG_OLD,
/** Beginning of frame. No payload. */
SR_DF_FRAME_BEGIN,
/** End of frame. No payload. */
SR_DF_FRAME_END,
- /** Payload is struct sr_datafeed_analog2. */
- SR_DF_ANALOG2,
+ /** Payload is struct sr_datafeed_analog. */
+ SR_DF_ANALOG,
+
+ /* Update datafeed_dump() (session.c) upon changes! */
};
-/** Measured quantity, sr_datafeed_analog.mq. */
+/** Measured quantity, sr_analog_meaning.mq. */
enum sr_mq {
SR_MQ_VOLTAGE = 10000,
SR_MQ_CURRENT,
SR_MQ_POWER_FACTOR,
/** Apparent power */
SR_MQ_APPARENT_POWER,
+ /** Mass */
+ SR_MQ_MASS,
+
+ /* Update sr_key_info_mq[] (hwdriver.c) upon changes! */
};
-/** Unit of measured quantity, sr_datafeed_analog.unit. */
+/** Unit of measured quantity, sr_analog_meaning.unit. */
enum sr_unit {
/** Volt */
SR_UNIT_VOLT = 10000,
SR_UNIT_DEGREE,
/** Henry (inductance). */
SR_UNIT_HENRY,
+ /** Mass in gram [g]. */
+ SR_UNIT_GRAM,
+ /** Mass in carat [ct]. */
+ SR_UNIT_CARAT,
+ /** Mass in ounce [oz]. */
+ SR_UNIT_OUNCE,
+ /** Mass in troy ounce [oz t]. */
+ SR_UNIT_TROY_OUNCE,
+ /** Mass in pound [lb]. */
+ SR_UNIT_POUND,
+ /** Mass in pennyweight [dwt]. */
+ SR_UNIT_PENNYWEIGHT,
+ /** Mass in grain [gr]. */
+ SR_UNIT_GRAIN,
+ /** Mass in tael (variants: Hong Kong, Singapore/Malaysia, Taiwan) */
+ SR_UNIT_TAEL,
+ /** Mass in momme. */
+ SR_UNIT_MOMME,
+ /** Mass in tola. */
+ SR_UNIT_TOLA,
+ /** Pieces (number of items). */
+ SR_UNIT_PIECE,
+
+ /*
+ * Update unit_strings[] (analog.c) and fancyprint() (output/analog.c)
+ * upon changes!
+ */
};
-/** Values for sr_datafeed_analog.flags. */
+/** Values for sr_analog_meaning.mqflags. */
enum sr_mqflag {
/** Voltage measurement is alternating current (AC). */
SR_MQFLAG_AC = 0x01,
SR_MQFLAG_AVG = 0x40000,
/** Reference value shown. */
SR_MQFLAG_REFERENCE = 0x80000,
+ /** Unstable value (hasn't settled yet). */
+ SR_MQFLAG_UNSTABLE = 0x100000,
+
+ /*
+ * Update mq_strings[] (analog.c) and fancyprint() (output/analog.c)
+ * upon changes!
+ */
};
enum sr_trigger_matches {
struct sr_rational {
/** Numerator of the rational number. */
- uint64_t p;
+ int64_t p;
/** Denominator of the rational number. */
uint64_t q;
};
void *data;
};
-/** Analog datafeed payload for type SR_DF_ANALOG. */
-struct sr_datafeed_analog {
+/** Analog datafeed payload for type SR_DF_ANALOG_OLD. */
+struct sr_datafeed_analog_old {
/** The channels for which data is included in this packet. */
GSList *channels;
/** Number of samples in data */
float *data;
};
-/** Analog datafeed payload for type SR_DF_ANALOG2. */
-struct sr_datafeed_analog2 {
+/** Analog datafeed payload for type SR_DF_ANALOG. */
+struct sr_datafeed_analog {
void *data;
uint32_t num_samples;
struct sr_analog_encoding *encoding;
/** Generic option struct used by various subsystems. */
struct sr_option {
/* Short name suitable for commandline usage, [a-z0-9-]. */
- char *id;
+ const char *id;
/* Short name suitable for GUI usage, can contain UTF-8. */
- char *name;
+ const char *name;
/* Description of the option, in a sentence. */
- char *desc;
+ const char *desc;
/* Default value for this option. */
GVariant *def;
/* List of possible values, if this is an option with few values. */
GSList *values;
};
+/** Resource type.
+ * @since 0.4.0
+ */
+enum sr_resource_type {
+ SR_RESOURCE_FIRMWARE = 1,
+};
+
+/** Resource descriptor.
+ * @since 0.4.0
+ */
+struct sr_resource {
+ /** Size of resource in bytes; set by resource open callback. */
+ uint64_t size;
+ /** File handle or equivalent; set by resource open callback. */
+ void *handle;
+ /** Resource type (SR_RESOURCE_FIRMWARE, ...) */
+ int type;
+};
+
+/** Output module flags. */
+enum sr_output_flag {
+ /** If set, this output module writes the output itself. */
+ SR_OUTPUT_INTERNAL_IO_HANDLING = 0x01,
+};
+
struct sr_input;
struct sr_input_module;
struct sr_output;
GVariant *data;
};
-/** Information about a config key. */
-struct sr_config_info {
- /** Config key like SR_CONF_CONN, etc. */
+enum sr_keytype {
+ SR_KEY_CONFIG,
+ SR_KEY_MQ,
+ SR_KEY_MQFLAGS,
+};
+
+/** Information about a key. */
+struct sr_key_info {
+ /** Config key like SR_CONF_CONN, MQ value like SR_MQ_VOLTAGE, etc. */
uint32_t key;
- /** Data type like SR_T_STRING, etc. */
+ /** Data type like SR_T_STRING, etc if applicable. */
int datatype;
- /** Id string, e.g. "serialcomm". */
- char *id;
- /** Name, e.g. "Serial communication". */
- char *name;
+ /** Short, lowercase ID string, e.g. "serialcomm", "voltage". */
+ const char *id;
+ /** Full capitalized name, e.g. "Serial communication". */
+ const char *name;
/** Verbose description (unused currently). */
- char *description;
+ const char *description;
};
-#define SR_CONF_GET (1 << 31)
-#define SR_CONF_SET (1 << 30)
-#define SR_CONF_LIST (1 << 29)
-#define SR_CONF_MASK 0x1fffffff
+/** Configuration capabilities. */
+enum sr_configcap {
+ /** Value can be read. */
+ SR_CONF_GET = (1 << 31),
+ /** Value can be written. */
+ SR_CONF_SET = (1 << 30),
+ /** Possible values can be enumerated. */
+ SR_CONF_LIST = (1 << 29),
+};
/** Configuration keys */
enum sr_configkey {
/** The device can act as an electronic load. */
SR_CONF_ELECTRONIC_LOAD,
+ /** The device can act as a scale. */
+ SR_CONF_SCALE,
+
+ /* Update sr_key_info_config[] (hwdriver.c) upon changes! */
+
/*--- Driver scan options -------------------------------------------*/
/**
*/
SR_CONF_MODBUSADDR,
+ /* Update sr_key_info_config[] (hwdriver.c) upon changes! */
+
/*--- Device (or channel group) configuration -----------------------*/
/** The device supports setting its samplerate, in Hz. */
/** Output frequency in Hz. */
SR_CONF_OUTPUT_FREQUENCY,
+ /** Output frequency target in Hz. */
+ SR_CONF_OUTPUT_FREQUENCY_TARGET,
+
/** Measured quantity. */
SR_CONF_MEASURED_QUANTITY,
- /** Measured secondary quantity. */
- SR_CONF_MEASURED_2ND_QUANTITY,
-
/** Equivalent circuit model. */
SR_CONF_EQUIV_CIRCUIT_MODEL,
- /* Output frequency target in Hz. */
- SR_CONF_OUTPUT_FREQUENCY_TARGET,
-
/** Over-temperature protection (OTP) active. */
SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE,
- /*--- Special stuff -------------------------------------------------*/
+ /** Under-voltage condition. */
+ SR_CONF_UNDER_VOLTAGE_CONDITION,
- /** Scan options supported by the driver. */
- SR_CONF_SCAN_OPTIONS = 40000,
+ /** Under-voltage condition active. */
+ SR_CONF_UNDER_VOLTAGE_CONDITION_ACTIVE,
- /** Device options for a particular device. */
- SR_CONF_DEVICE_OPTIONS,
+ /* Update sr_key_info_config[] (hwdriver.c) upon changes! */
+
+ /*--- Special stuff -------------------------------------------------*/
/** Session filename. */
- SR_CONF_SESSIONFILE,
+ SR_CONF_SESSIONFILE = 40000,
/** The device supports specifying a capturefile to inject. */
SR_CONF_CAPTUREFILE,
/** The device supports setting a probe factor. */
SR_CONF_PROBE_FACTOR,
+ /* Update sr_key_info_config[] (hwdriver.c) upon changes! */
+
/*--- Acquisition modes, sample limiting ----------------------------*/
/**
/** Self test mode. */
SR_CONF_TEST_MODE,
+
+ /* Update sr_key_info_config[] (hwdriver.c) upon changes! */
};
/**
struct sr_dev_driver {
/* Driver-specific */
/** Driver name. Lowercase a-z, 0-9 and dashes (-) only. */
- char *name;
+ const char *name;
/** Long name. Verbose driver name shown to user. */
- char *longname;
+ const char *longname;
/** API version (currently 1). */
int api_version;
/** Called when driver is loaded, e.g. program startup. */
void *context;
};
-/**
- * @struct sr_session
- *
- * Opaque data structure representing a libsigrok session. None of the fields
- * of this structure are meant to be accessed directly.
- */
-struct sr_session;
-
/** Serial port descriptor. */
struct sr_serial_port {
/** The OS dependent name of the serial port. */
char *description;
};
-#include "proto.h"
-#include "version.h"
+#include <libsigrok/proto.h>
+#include <libsigrok/version.h>
#ifdef __cplusplus
}