analog.mq = SR_MQ_SOUND_PRESSURE_LEVEL;
analog.mqflags = devc->cur_mqflags;
analog.unit = SR_UNIT_DECIBEL_SPL;
- analog.probes = sdi->probes;
+ analog.channels = sdi->channels;
analog.num_samples = 1;
analog.data = &devc->last_spl;
packet.type = SR_DF_ANALOG;
case TOKEN_RECORDING_OFF:
devc->recording = FALSE;
break;
+ case TOKEN_MEAS_RANGE_30_80:
+ case TOKEN_MEAS_RANGE_30_130:
+ case TOKEN_MEAS_RANGE_50_100:
+ case TOKEN_MEAS_RANGE_80_130:
+ devc->cur_meas_range = devc->token;
+ break;
case TOKEN_TIME:
case TOKEN_STORE_OK:
case TOKEN_STORE_FULL:
case TOKEN_MEAS_RANGE_OK:
case TOKEN_MEAS_RANGE_OVER:
case TOKEN_MEAS_RANGE_UNDER:
- case TOKEN_MEAS_RANGE_30_80:
- case TOKEN_MEAS_RANGE_30_130:
- case TOKEN_MEAS_RANGE_50_100:
- case TOKEN_MEAS_RANGE_80_130:
/* Not useful, or not expressable in sigrok. */
break;
}
}
+static void send_data(const struct sr_dev_inst *sdi, unsigned char *data,
+ uint64_t num_samples)
+{
+ struct dev_context *devc;
+ struct sr_datafeed_packet packet;
+ struct sr_datafeed_analog analog;
+ float fbuf[SAMPLES_PER_PACKET];
+ unsigned int i;
+
+ devc = sdi->priv;
+
+ for (i = 0; i < num_samples; i ++) {
+ fbuf[i] = ((data[i * 2] & 0xf0) >> 4) * 100;
+ fbuf[i] += (data[i * 2] & 0x0f) * 10;
+ fbuf[i] += ((data[i * 2 + 1] & 0xf0) >> 4);
+ fbuf[i] += (data[i * 2 + 1] & 0x0f) / 10.0;
+ }
+ memset(&analog, 0, sizeof(struct sr_datafeed_analog));
+ analog.mq = SR_MQ_SOUND_PRESSURE_LEVEL;
+ analog.mqflags = devc->cur_mqflags;
+ analog.unit = SR_UNIT_DECIBEL_SPL;
+ analog.channels = sdi->channels;
+ analog.num_samples = num_samples;
+ analog.data = fbuf;
+ packet.type = SR_DF_ANALOG;
+ packet.payload = &analog;
+ sr_session_send(devc->cb_data, &packet);
+
+ devc->num_samples += analog.num_samples;
+ if (devc->limit_samples && devc->num_samples >= devc->limit_samples)
+ sdi->driver->dev_acquisition_stop((struct sr_dev_inst *)sdi,
+ devc->cb_data);
+
+ return;
+}
+
static void process_byte(const struct sr_dev_inst *sdi, const unsigned char c,
int handle_packets)
{
struct dev_context *devc;
+ struct sr_datafeed_packet packet;
+ struct sr_datafeed_meta meta;
+ struct sr_config *src;
gint64 cur_time;
int len;
} else if (c == 0xbb) {
devc->cmd = c;
devc->buf_len = 0;
- devc->state = ST_GET_LOG;
+ devc->state = ST_GET_LOG_HEADER;
+ sr_dbg("got command 0xbb");
}
} else if (devc->state == ST_GET_TOKEN) {
devc->token = c;
devc->state = ST_INIT;
}
}
- } else if (devc->state == ST_GET_LOG) {
+ } else if (devc->state == ST_GET_LOG_HEADER) {
+ sr_dbg("log header: 0x%.2x", c);
+ if (devc->buf_len < 2)
+ devc->buf[devc->buf_len++] = c;
+ if (devc->buf_len == 2) {
+ sr_dbg("Device says it has %d bytes stored.",
+ ((devc->buf[0] << 8) + devc->buf[1]) - 100);
+ devc->buf_len = 0;
+ devc->state = ST_GET_LOG_RECORD_META;
+ }
+ } else if (devc->state == ST_GET_LOG_RECORD_META) {
+ sr_dbg("log meta: 0x%.2x", c);
+ if (c == RECORD_END) {
+ devc->state = ST_INIT;
+ /* Stop acquisition after transferring all stored
+ * records. Otherwise the frontend would have no
+ * way to tell where stored data ends and live
+ * measurements begin. */
+ sdi->driver->dev_acquisition_stop((struct sr_dev_inst *)sdi,
+ devc->cb_data);
+ } else if (c == RECORD_DATA) {
+ devc->buf_len = 0;
+ devc->state = ST_GET_LOG_RECORD_DATA;
+ } else {
+ /* RECORD_DBA/RECORD_DBC + 7 bytes of metadata */
+ devc->buf[devc->buf_len++] = c;
+ if (devc->buf_len < 8)
+ /* Keep filling up the record header. */
+ return;
+ if (devc->buf[0] == RECORD_DBA)
+ devc->cur_mqflags = SR_MQFLAG_SPL_FREQ_WEIGHT_A;
+ else if (devc->buf[0] == RECORD_DBC)
+ devc->cur_mqflags = SR_MQFLAG_SPL_FREQ_WEIGHT_C;
+ else {
+ /* Shouldn't happen. */
+ sr_dbg("Unknown record token 0x%.2x", c);
+ return;
+ }
+ packet.type = SR_DF_META;
+ packet.payload = &meta;
+ src = sr_config_new(SR_CONF_SAMPLE_INTERVAL,
+ g_variant_new_uint64(devc->buf[7] * 1000));
+ meta.config = g_slist_append(NULL, src);
+ sr_session_send(devc->cb_data, &packet);
+ g_free(src);
+ devc->buf_len = 0;
+ }
+ } else if (devc->state == ST_GET_LOG_RECORD_DATA) {
+ sr_dbg("log data: 0x%.2x", c);
+ if (c == RECORD_DBA || c == RECORD_DBC || c == RECORD_DATA || c == RECORD_END) {
+ /* Work around off-by-one bug in device firmware. This
+ * happens only on the last record, i.e. before RECORD_END */
+ if (devc->buf_len & 1)
+ devc->buf_len--;
+ /* Done with this set of samples */
+ send_data(sdi, devc->buf, devc->buf_len / 2);
+ devc->buf_len = 0;
+
+ /* Process this meta marker in the right state. */
+ devc->state = ST_GET_LOG_RECORD_META;
+ process_byte(sdi, c, handle_packets);
+ } else {
+ devc->buf[devc->buf_len++] = c;
+ if (devc->buf_len == SAMPLES_PER_PACKET * 2) {
+ send_data(sdi, devc->buf, devc->buf_len / 2);
+ devc->buf_len = 0;
+ }
+ }
}
}
SR_PRIV int cem_dt_885x_receive_data(int fd, int revents, void *cb_data)
{
const struct sr_dev_inst *sdi;
+ struct dev_context *devc;
struct sr_serial_dev_inst *serial;
- unsigned char c;
+ unsigned char c, cmd;
(void)fd;
if (!(sdi = cb_data))
return TRUE;
+ devc = sdi->priv;
serial = sdi->conn;
if (revents == G_IO_IN) {
if (serial_read(serial, &c, 1) != 1)
return TRUE;
process_byte(sdi, c, TRUE);
+
+ if (devc->enable_data_source_memory) {
+ if (devc->state == ST_GET_LOG_HEADER) {
+ /* Memory transfer started. */
+ devc->enable_data_source_memory = FALSE;
+ } else {
+ /* Tell device to start transferring from memory. */
+ cmd = CMD_TRANSFER_MEMORY;
+ serial_write(serial, &cmd, 1);
+ }
+ }
}
return TRUE;
}
-static int wait_for_token(const struct sr_dev_inst *sdi, char *tokens, int timeout)
+static int wait_for_token(const struct sr_dev_inst *sdi, int8_t *tokens, int timeout)
{
struct dev_context *devc;
struct sr_serial_dev_inst *serial;
/* cmd is the command to send, tokens are the tokens that denote the state
* which the command affects. The first token is the desired state. */
-SR_PRIV int cem_dt_885x_toggle(const struct sr_dev_inst *sdi, uint8_t cmd,
- char *tokens, int timeout)
+static int cem_dt_885x_toggle(const struct sr_dev_inst *sdi, uint8_t cmd,
+ int8_t *tokens, int timeout)
{
struct dev_context *devc;
struct sr_serial_dev_inst *serial;
int *state)
{
struct dev_context *devc;
- char tokens[5];
+ int8_t tokens[5];
devc = sdi->priv;
if (devc->recording == -1) {
{
struct dev_context *devc;
int ret;
- char tokens[5];
+ int8_t tokens[5];
devc = sdi->priv;
{
struct dev_context *devc;
int cur_setting;
- char tokens[5];
+ int8_t tokens[5];
devc = sdi->priv;
return SR_MQFLAG_SPL_FREQ_WEIGHT_C;
} else
return cur_setting;
-
}
SR_PRIV int cem_dt_885x_weight_freq_set(const struct sr_dev_inst *sdi, int freqw)
{
struct dev_context *devc;
int cur_setting, ret;
- char tokens[5];
+ int8_t tokens[5];
devc = sdi->priv;
{
struct dev_context *devc;
int cur_setting;
- char tokens[5];
+ int8_t tokens[5];
devc = sdi->priv;
return SR_MQFLAG_SPL_TIME_WEIGHT_S;
} else
return cur_setting;
-
}
SR_PRIV int cem_dt_885x_weight_time_set(const struct sr_dev_inst *sdi, int timew)
{
struct dev_context *devc;
int cur_setting, ret;
- char tokens[5];
+ int8_t tokens[5];
devc = sdi->priv;
gboolean *holdmode)
{
struct dev_context *devc;
- char tokens[5];
+ int8_t tokens[5];
devc = sdi->priv;
{
struct dev_context *devc;
int cur_setting, ret;
- char tokens[5];
+ int8_t tokens[5];
devc = sdi->priv;
return ret;
}
+
+SR_PRIV int cem_dt_885x_meas_range_get(const struct sr_dev_inst *sdi,
+ uint64_t *low, uint64_t *high)
+{
+ struct dev_context *devc;
+ int8_t tokens[5];
+
+ devc = sdi->priv;
+ if (devc->cur_meas_range == 0) {
+ tokens[0] = TOKEN_MEAS_RANGE_30_130;
+ tokens[1] = TOKEN_MEAS_RANGE_30_80;
+ tokens[2] = TOKEN_MEAS_RANGE_50_100;
+ tokens[3] = TOKEN_MEAS_RANGE_80_130;
+ tokens[4] = -1;
+ if (wait_for_token(sdi, tokens, 0) != SR_OK)
+ return SR_ERR;
+ devc->cur_meas_range = devc->token;
+ }
+
+ switch (devc->cur_meas_range) {
+ case TOKEN_MEAS_RANGE_30_130:
+ *low = 30;
+ *high = 130;
+ break;
+ case TOKEN_MEAS_RANGE_30_80:
+ *low = 30;
+ *high = 80;
+ break;
+ case TOKEN_MEAS_RANGE_50_100:
+ *low = 50;
+ *high = 100;
+ break;
+ case TOKEN_MEAS_RANGE_80_130:
+ *low = 80;
+ *high = 130;
+ break;
+ default:
+ return SR_ERR;
+ }
+
+ return SR_OK;
+}
+
+SR_PRIV int cem_dt_885x_meas_range_set(const struct sr_dev_inst *sdi,
+ uint64_t low, uint64_t high)
+{
+ struct dev_context *devc;
+ int ret;
+ int8_t token, tokens[6];
+
+ devc = sdi->priv;
+ if (low == 30 && high == 130)
+ token = TOKEN_MEAS_RANGE_30_130;
+ else if (low == 30 && high == 80)
+ token = TOKEN_MEAS_RANGE_30_80;
+ else if (low == 50 && high == 100)
+ token = TOKEN_MEAS_RANGE_50_100;
+ else if (low == 80 && high == 130)
+ token = TOKEN_MEAS_RANGE_80_130;
+ else
+ return SR_ERR;
+
+ sr_dbg("want 0x%.2x", token);
+ /* The toggle below needs the desired state in first position. */
+ tokens[0] = token;
+ tokens[1] = TOKEN_MEAS_RANGE_30_130;
+ tokens[2] = TOKEN_MEAS_RANGE_30_80;
+ tokens[3] = TOKEN_MEAS_RANGE_50_100;
+ tokens[4] = TOKEN_MEAS_RANGE_80_130;
+ tokens[5] = -1;
+
+ if (devc->cur_meas_range == 0) {
+ /* 110ms should be enough for two of these announcements */
+ if (wait_for_token(sdi, tokens, 110) != SR_OK)
+ return SR_ERR;
+ devc->cur_meas_range = devc->token;
+ }
+
+ if (devc->cur_meas_range == token)
+ /* Already set to this range. */
+ return SR_OK;
+
+ /* For measurement range, it works best to ignore announcements of the
+ * current setting and keep resending the toggle quickly. */
+ tokens[1] = -1;
+ ret = cem_dt_885x_toggle(sdi, CMD_TOGGLE_MEAS_RANGE, tokens, 11);
+
+ return ret;
+}
+
+SR_PRIV int cem_dt_885x_power_off(const struct sr_dev_inst *sdi)
+{
+ struct sr_serial_dev_inst *serial;
+ char c, cmd;
+
+ serial = sdi->conn;
+
+ /* Reopen the port in non-blocking mode, so we can properly
+ * detect when the device stops communicating. */
+ serial_close(serial);
+ if (serial_open(serial, SERIAL_RDWR | SERIAL_NONBLOCK) != SR_OK)
+ return SR_ERR;
+
+ cmd = CMD_TOGGLE_POWER_OFF;
+ while (TRUE) {
+ serial_flush(serial);
+ if (serial_write(serial, (const void *)&cmd, 1) != 1)
+ return SR_ERR;
+ /* It never takes more than 23ms for the next token to arrive. */
+ g_usleep(25 * 1000);
+ if (serial_read(serial, &c, 1) != 1)
+ /* Device is no longer responding. Good! */
+ break;
+ }
+
+ /* In case the user manually turns on the device again, reset
+ * the port back to blocking. */
+ serial_close(serial);
+ serial_open(serial, SERIAL_RDWR);
+
+ return SR_OK;
+}