##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either data 2 of the License, or
-## (at your option) any later data.
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+## along with this program; if not, see <http://www.gnu.org/licenses/>.
##
import sigrokdecode as srd
pass
class Decoder(srd.Decoder):
- api_version = 2
+ api_version = 3
id = 'em4100'
name = 'EM4100'
longname = 'RFID EM4100'
desc = 'EM4100 100-150kHz RFID protocol.'
license = 'gplv2+'
inputs = ['logic']
- outputs = ['em4100']
+ outputs = []
+ tags = ['IC', 'RFID']
channels = (
{'id': 'data', 'name': 'Data', 'desc': 'Data line'},
)
options = (
{'id': 'polarity', 'desc': 'Polarity', 'default': 'active-high',
'values': ('active-low', 'active-high')},
- {'id': 'datarate' , 'desc': 'Data rate', 'default': '64',
- 'values': ('64', '32', '16')},
+ {'id': 'datarate' , 'desc': 'Data rate', 'default': 64,
+ 'values': (64, 32, 16)},
# {'id': 'coding', 'desc': 'Bit coding', 'default': 'biphase',
# 'values': ('biphase', 'manchester', 'psk')},
- {'id': 'coilfreq', 'desc': 'Coil frequency', 'default': '125000'},
+ {'id': 'coilfreq', 'desc': 'Coil frequency', 'default': 125000},
)
annotations = (
('bit', 'Bit'),
('tags', 'Tags', (9,)),
)
- def __init__(self, **kwargs):
+ def __init__(self):
+ self.reset()
+
+ def reset(self):
self.samplerate = None
self.oldpin = None
self.last_samplenum = None
self.oldpl = 0
self.oldsamplenum = 0
self.last_bit_pos = 0
- self.first_start = 0
+ self.ss_first = 0
self.first_one = 0
self.state = 'HEADER'
self.data = 0
self.data_bits = 0
- self.data_start = 0
+ self.ss_data = 0
self.data_parity = 0
self.payload_cnt = 0
self.data_col_parity = [0, 0, 0, 0, 0, 0]
def metadata(self, key, value):
if key == srd.SRD_CONF_SAMPLERATE:
self.samplerate = value
- self.bit_width = (self.samplerate / (int(self.options['coilfreq']))) * int(self.options['datarate'])
+ self.bit_width = (self.samplerate / self.options['coilfreq']) * self.options['datarate']
self.halfbit_limit = self.bit_width/2 + self.bit_width/4
self.polarity = 0 if self.options['polarity'] == 'active-low' else 1
def start(self):
self.out_ann = self.register(srd.OUTPUT_ANN)
- def add_bit(self, bit, bit_start, bit_stop):
+ def putbit(self, bit, ss, es):
+ self.put(ss, es, self.out_ann, [0, [str(bit)]])
if self.state == 'HEADER':
if bit == 1:
if self.first_one > 0:
self.first_one += 1
if self.first_one == 9:
- self.put(int(self.first_start), int(bit_stop), self.out_ann,
+ self.put(self.ss_first, es, self.out_ann,
[1, ['Header', 'Head', 'He', 'H']])
self.first_one = 0
self.state = 'PAYLOAD'
return
if self.first_one == 0:
self.first_one = 1
- self.first_start = bit_start
+ self.ss_first = ss
if bit == 0:
self.first_one = 0
if self.state == 'PAYLOAD':
self.payload_cnt += 1
if self.data_bits == 0:
- self.data_start = bit_start
+ self.ss_data = ss
self.data = 0
self.data_parity = 0
self.data_bits += 1
if self.data_bits == 5:
s = 'Version/customer' if self.payload_cnt <= 10 else 'Data'
c = 2 if self.payload_cnt <= 10 else 3
- self.put(int(self.data_start), int(bit_start), self.out_ann,
+ self.put(self.ss_data, ss, self.out_ann,
[c, [s + ': %X' % self.data, '%X' % self.data]])
s = 'OK' if self.data_parity == bit else 'ERROR'
c = 4 if s == 'OK' else 5
if s == 'ERROR':
self.all_row_parity_ok = False
- self.put(int(bit_start), int(bit_stop), self.out_ann,
+ self.put(ss, es, self.out_ann,
[c, ['Row parity: ' + s, 'RP: ' + s, 'RP', 'R']])
self.tag = (self.tag << 4) | self.data
self.data_bits = 0
if self.state == 'TRAILER':
self.payload_cnt += 1
if self.data_bits == 0:
- self.data_start = bit_start
+ self.ss_data = ss
self.data = 0
self.data_parity = 0
self.data_bits += 1
self.col_parity[self.data_bits] = bit
- self.col_parity_pos.append([int(bit_start), int(bit_stop)])
+ self.col_parity_pos.append([ss, es])
if self.data_bits == 5:
- self.put(int(bit_start), int(bit_stop), self.out_ann,
- [8, ['Stop bit', 'SB', 'S']])
+ self.put(ss, es, self.out_ann, [8, ['Stop bit', 'SB', 'S']])
for i in range(1, 5):
s = 'OK' if self.data_col_parity[i] == \
# Emit an annotation for valid-looking tags.
all_col_parity_ok = (self.data_col_parity[1:5] == self.col_parity[1:5])
if all_col_parity_ok and self.all_row_parity_ok:
- self.put(int(self.first_start), int(bit_stop), self.out_ann,
+ self.put(self.ss_first, es, self.out_ann,
[9, ['Tag: %010X' % self.tag, 'Tag', 'T']])
self.tag = 0
self.col_parity_pos = []
self.all_row_parity_ok = True
- def putbit(self, bit, bit_start, bit_stop):
- self.put(int(bit_start), int(bit_stop), self.out_ann,
- [0, [str(bit)]])
- self.add_bit(bit, bit_start, bit_stop)
-
- def manchester_decode(self, samplenum, pl, pp, pin):
- bit_start = 0
- bit_stop = 0
+ def manchester_decode(self, pl, pp, pin):
bit = self.oldpin ^ self.polarity
if pl > self.halfbit_limit:
- samples = samplenum - self.oldsamplenum
- t = samples / self.samplerate
-
+ es = int(self.samplenum - pl/2)
if self.oldpl > self.halfbit_limit:
- bit_start = int(self.oldsamplenum - self.oldpl/2)
- bit_stop = int(samplenum - pl/2)
- self.putbit(bit, bit_start, bit_stop)
- if self.oldpl <= self.halfbit_limit:
- bit_start = int(self.oldsamplenum - self.oldpl)
- bit_stop = int(samplenum - pl/2)
- self.putbit(bit, bit_start, bit_stop)
- self.last_bit_pos = int(samplenum - pl/2)
-
- if pl < self.halfbit_limit:
- samples = samplenum - self.oldsamplenum
- t = samples / self.samplerate
-
+ ss = int(self.oldsamplenum - self.oldpl/2)
+ else:
+ ss = int(self.oldsamplenum - self.oldpl)
+ self.putbit(bit, ss, es)
+ self.last_bit_pos = int(self.samplenum - pl/2)
+ else:
+ es = int(self.samplenum)
if self.oldpl > self.halfbit_limit:
- bit_start = self.oldsamplenum - self.oldpl/2
- bit_stop = int(samplenum)
- self.putbit(bit, bit_start, bit_stop)
- self.last_bit_pos = int(samplenum)
- if self.oldpl <= self.halfbit_limit:
+ ss = int(self.oldsamplenum - self.oldpl/2)
+ self.putbit(bit, ss, es)
+ self.last_bit_pos = int(self.samplenum)
+ else:
if self.last_bit_pos <= self.oldsamplenum - self.oldpl:
- bit_start = self.oldsamplenum - self.oldpl
- bit_stop = int(samplenum)
- self.putbit(bit, bit_start, bit_stop)
- self.last_bit_pos = int(samplenum)
+ ss = int(self.oldsamplenum - self.oldpl)
+ self.putbit(bit, ss, es)
+ self.last_bit_pos = int(self.samplenum)
- def decode(self, ss, es, data):
+ def decode(self):
if not self.samplerate:
raise SamplerateError('Cannot decode without samplerate.')
- for (samplenum, (pin,)) in data:
- # Ignore identical samples early on (for performance reasons).
- if self.oldpin == pin:
- continue
-
- if self.oldpin is None:
- self.oldpin = pin
- self.last_samplenum = samplenum
- self.lastlast_samplenum = samplenum
- self.last_edge = samplenum
- self.oldpl = 0
- self.oldpp = 0
- self.oldsamplenum = 0
- self.last_bit_pos = 0
- continue
- if self.oldpin != pin:
- pl = samplenum - self.oldsamplenum
- pp = pin
-
- self.manchester_decode(samplenum, pl, pp, pin)
+ # Initialize internal state from the very first sample.
+ (pin,) = self.wait()
+ self.oldpin = pin
+ self.last_samplenum = self.samplenum
+ self.lastlast_samplenum = self.samplenum
+ self.last_edge = self.samplenum
+ self.oldpl = 0
+ self.oldpp = 0
+ self.oldsamplenum = 0
+ self.last_bit_pos = 0
- self.oldpl = pl
- self.oldpp = pp
- self.oldsamplenum = samplenum
- self.oldpin = pin
+ while True:
+ # Ignore identical samples, only process edges.
+ (pin,) = self.wait({0: 'e'})
+ pl = self.samplenum - self.oldsamplenum
+ pp = pin
+ self.manchester_decode(pl, pp, pin)
+ self.oldpl = pl
+ self.oldpp = pp
+ self.oldsamplenum = self.samplenum
+ self.oldpin = pin