2 * This file is part of the libsigrok project.
4 * Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
6 * This program is free software: you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation, either version 3 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program. If not, see <http://www.gnu.org/licenses/>.
23 #include <sys/types.h>
27 #include <libsigrok/libsigrok.h>
28 #include "libsigrok-internal.h"
31 #define LOG_PREFIX "hwdriver"
37 * Hardware driver handling in libsigrok.
41 * @defgroup grp_driver Hardware drivers
43 * Hardware driver handling in libsigrok.
48 /* Please use the same order/grouping as in enum sr_configkey (libsigrok.h). */
49 static struct sr_key_info sr_key_info_config[] = {
51 {SR_CONF_LOGIC_ANALYZER, SR_T_STRING, NULL, "Logic analyzer", NULL},
52 {SR_CONF_OSCILLOSCOPE, SR_T_STRING, NULL, "Oscilloscope", NULL},
53 {SR_CONF_MULTIMETER, SR_T_STRING, NULL, "Multimeter", NULL},
54 {SR_CONF_DEMO_DEV, SR_T_STRING, NULL, "Demo device", NULL},
55 {SR_CONF_SOUNDLEVELMETER, SR_T_STRING, NULL, "Sound level meter", NULL},
56 {SR_CONF_THERMOMETER, SR_T_STRING, NULL, "Thermometer", NULL},
57 {SR_CONF_HYGROMETER, SR_T_STRING, NULL, "Hygrometer", NULL},
58 {SR_CONF_ENERGYMETER, SR_T_STRING, NULL, "Energy meter", NULL},
59 {SR_CONF_DEMODULATOR, SR_T_STRING, NULL, "Demodulator", NULL},
60 {SR_CONF_POWER_SUPPLY, SR_T_STRING, NULL, "Power supply", NULL},
61 {SR_CONF_LCRMETER, SR_T_STRING, NULL, "LCR meter", NULL},
62 {SR_CONF_ELECTRONIC_LOAD, SR_T_STRING, NULL, "Electronic load", NULL},
63 {SR_CONF_SCALE, SR_T_STRING, NULL, "Scale", NULL},
64 {SR_CONF_SIGNAL_GENERATOR, SR_T_STRING, NULL, "Signal generator", NULL},
65 {SR_CONF_POWERMETER, SR_T_STRING, NULL, "Power meter", NULL},
67 /* Driver scan options */
68 {SR_CONF_CONN, SR_T_STRING, "conn",
70 {SR_CONF_SERIALCOMM, SR_T_STRING, "serialcomm",
71 "Serial communication", NULL},
72 {SR_CONF_MODBUSADDR, SR_T_UINT64, "modbusaddr",
73 "Modbus slave address", NULL},
75 /* Device (or channel group) configuration */
76 {SR_CONF_SAMPLERATE, SR_T_UINT64, "samplerate",
78 {SR_CONF_CAPTURE_RATIO, SR_T_UINT64, "captureratio",
79 "Pre-trigger capture ratio", NULL},
80 {SR_CONF_PATTERN_MODE, SR_T_STRING, "pattern",
82 {SR_CONF_RLE, SR_T_BOOL, "rle",
83 "Run length encoding", NULL},
84 {SR_CONF_TRIGGER_SLOPE, SR_T_STRING, "triggerslope",
85 "Trigger slope", NULL},
86 {SR_CONF_AVERAGING, SR_T_BOOL, "averaging",
88 {SR_CONF_AVG_SAMPLES, SR_T_UINT64, "avg_samples",
89 "Number of samples to average over", NULL},
90 {SR_CONF_TRIGGER_SOURCE, SR_T_STRING, "triggersource",
91 "Trigger source", NULL},
92 {SR_CONF_HORIZ_TRIGGERPOS, SR_T_FLOAT, "horiz_triggerpos",
93 "Horizontal trigger position", NULL},
94 {SR_CONF_BUFFERSIZE, SR_T_UINT64, "buffersize",
96 {SR_CONF_TIMEBASE, SR_T_RATIONAL_PERIOD, "timebase",
98 {SR_CONF_FILTER, SR_T_BOOL, "filter",
100 {SR_CONF_VDIV, SR_T_RATIONAL_VOLT, "vdiv",
102 {SR_CONF_COUPLING, SR_T_STRING, "coupling",
104 {SR_CONF_TRIGGER_MATCH, SR_T_INT32, "triggermatch",
105 "Trigger matches", NULL},
106 {SR_CONF_SAMPLE_INTERVAL, SR_T_UINT64, "sample_interval",
107 "Sample interval", NULL},
108 {SR_CONF_NUM_HDIV, SR_T_INT32, "num_hdiv",
109 "Number of horizontal divisions", NULL},
110 {SR_CONF_NUM_VDIV, SR_T_INT32, "num_vdiv",
111 "Number of vertical divisions", NULL},
112 {SR_CONF_SPL_WEIGHT_FREQ, SR_T_STRING, "spl_weight_freq",
113 "Sound pressure level frequency weighting", NULL},
114 {SR_CONF_SPL_WEIGHT_TIME, SR_T_STRING, "spl_weight_time",
115 "Sound pressure level time weighting", NULL},
116 {SR_CONF_SPL_MEASUREMENT_RANGE, SR_T_UINT64_RANGE, "spl_meas_range",
117 "Sound pressure level measurement range", NULL},
118 {SR_CONF_HOLD_MAX, SR_T_BOOL, "hold_max",
120 {SR_CONF_HOLD_MIN, SR_T_BOOL, "hold_min",
122 {SR_CONF_VOLTAGE_THRESHOLD, SR_T_DOUBLE_RANGE, "voltage_threshold",
123 "Voltage threshold", NULL },
124 {SR_CONF_EXTERNAL_CLOCK, SR_T_BOOL, "external_clock",
125 "External clock mode", NULL},
126 {SR_CONF_SWAP, SR_T_BOOL, "swap",
127 "Swap channel order", NULL},
128 {SR_CONF_CENTER_FREQUENCY, SR_T_UINT64, "center_frequency",
129 "Center frequency", NULL},
130 {SR_CONF_NUM_LOGIC_CHANNELS, SR_T_INT32, "logic_channels",
131 "Number of logic channels", NULL},
132 {SR_CONF_NUM_ANALOG_CHANNELS, SR_T_INT32, "analog_channels",
133 "Number of analog channels", NULL},
134 {SR_CONF_VOLTAGE, SR_T_FLOAT, "voltage",
135 "Current voltage", NULL},
136 {SR_CONF_VOLTAGE_TARGET, SR_T_FLOAT, "voltage_target",
137 "Voltage target", NULL},
138 {SR_CONF_CURRENT, SR_T_FLOAT, "current",
139 "Current current", NULL},
140 {SR_CONF_CURRENT_LIMIT, SR_T_FLOAT, "current_limit",
141 "Current limit", NULL},
142 {SR_CONF_ENABLED, SR_T_BOOL, "enabled",
143 "Channel enabled", NULL},
144 {SR_CONF_CHANNEL_CONFIG, SR_T_STRING, "channel_config",
145 "Channel modes", NULL},
146 {SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED, SR_T_BOOL, "ovp_enabled",
147 "Over-voltage protection enabled", NULL},
148 {SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE, SR_T_BOOL, "ovp_active",
149 "Over-voltage protection active", NULL},
150 {SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD, SR_T_FLOAT, "ovp_threshold",
151 "Over-voltage protection threshold", NULL},
152 {SR_CONF_OVER_CURRENT_PROTECTION_ENABLED, SR_T_BOOL, "ocp_enabled",
153 "Over-current protection enabled", NULL},
154 {SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE, SR_T_BOOL, "ocp_active",
155 "Over-current protection active", NULL},
156 {SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD, SR_T_FLOAT, "ocp_threshold",
157 "Over-current protection threshold", NULL},
158 {SR_CONF_CLOCK_EDGE, SR_T_STRING, "clock_edge",
160 {SR_CONF_AMPLITUDE, SR_T_FLOAT, "amplitude",
162 {SR_CONF_REGULATION, SR_T_STRING, "regulation",
163 "Channel regulation", NULL},
164 {SR_CONF_OVER_TEMPERATURE_PROTECTION, SR_T_BOOL, "otp",
165 "Over-temperature protection", NULL},
166 {SR_CONF_OUTPUT_FREQUENCY, SR_T_FLOAT, "output_frequency",
167 "Output frequency", NULL},
168 {SR_CONF_OUTPUT_FREQUENCY_TARGET, SR_T_FLOAT, "output_frequency_target",
169 "Output frequency target", NULL},
170 {SR_CONF_MEASURED_QUANTITY, SR_T_MQ, "measured_quantity",
171 "Measured quantity", NULL},
172 {SR_CONF_EQUIV_CIRCUIT_MODEL, SR_T_STRING, "equiv_circuit_model",
173 "Equivalent circuit model", NULL},
174 {SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE, SR_T_BOOL, "otp_active",
175 "Over-temperature protection active", NULL},
176 {SR_CONF_UNDER_VOLTAGE_CONDITION, SR_T_BOOL, "uvc",
177 "Under-voltage condition", NULL},
178 {SR_CONF_UNDER_VOLTAGE_CONDITION_ACTIVE, SR_T_BOOL, "uvc_active",
179 "Under-voltage condition active", NULL},
180 {SR_CONF_TRIGGER_LEVEL, SR_T_FLOAT, "triggerlevel",
181 "Trigger level", NULL},
184 {SR_CONF_SESSIONFILE, SR_T_STRING, "sessionfile",
185 "Session file", NULL},
186 {SR_CONF_CAPTUREFILE, SR_T_STRING, "capturefile",
187 "Capture file", NULL},
188 {SR_CONF_CAPTURE_UNITSIZE, SR_T_UINT64, "capture_unitsize",
189 "Capture unitsize", NULL},
190 {SR_CONF_POWER_OFF, SR_T_BOOL, "power_off",
192 {SR_CONF_DATA_SOURCE, SR_T_STRING, "data_source",
193 "Data source", NULL},
194 {SR_CONF_PROBE_FACTOR, SR_T_UINT64, "probe_factor",
195 "Probe factor", NULL},
196 {SR_CONF_ADC_POWERLINE_CYCLES, SR_T_FLOAT, "nplc",
197 "Number of ADC powerline cycles", NULL},
199 /* Acquisition modes, sample limiting */
200 {SR_CONF_LIMIT_MSEC, SR_T_UINT64, "limit_time",
202 {SR_CONF_LIMIT_SAMPLES, SR_T_UINT64, "limit_samples",
203 "Sample limit", NULL},
204 {SR_CONF_LIMIT_FRAMES, SR_T_UINT64, "limit_frames",
205 "Frame limit", NULL},
206 {SR_CONF_CONTINUOUS, SR_T_BOOL, "continuous",
207 "Continuous sampling", NULL},
208 {SR_CONF_DATALOG, SR_T_BOOL, "datalog",
210 {SR_CONF_DEVICE_MODE, SR_T_STRING, "device_mode",
211 "Device mode", NULL},
212 {SR_CONF_TEST_MODE, SR_T_STRING, "test_mode",
218 /* Please use the same order as in enum sr_mq (libsigrok.h). */
219 static struct sr_key_info sr_key_info_mq[] = {
220 {SR_MQ_VOLTAGE, 0, "voltage", "Voltage", NULL},
221 {SR_MQ_CURRENT, 0, "current", "Current", NULL},
222 {SR_MQ_RESISTANCE, 0, "resistance", "Resistance", NULL},
223 {SR_MQ_CAPACITANCE, 0, "capacitance", "Capacitance", NULL},
224 {SR_MQ_TEMPERATURE, 0, "temperature", "Temperature", NULL},
225 {SR_MQ_FREQUENCY, 0, "frequency", "Frequency", NULL},
226 {SR_MQ_DUTY_CYCLE, 0, "duty_cycle", "Duty cycle", NULL},
227 {SR_MQ_CONTINUITY, 0, "continuity", "Continuity", NULL},
228 {SR_MQ_PULSE_WIDTH, 0, "pulse_width", "Pulse width", NULL},
229 {SR_MQ_CONDUCTANCE, 0, "conductance", "Conductance", NULL},
230 {SR_MQ_POWER, 0, "power", "Power", NULL},
231 {SR_MQ_GAIN, 0, "gain", "Gain", NULL},
232 {SR_MQ_SOUND_PRESSURE_LEVEL, 0, "spl", "Sound pressure level", NULL},
233 {SR_MQ_CARBON_MONOXIDE, 0, "co", "Carbon monoxide", NULL},
234 {SR_MQ_RELATIVE_HUMIDITY, 0, "rh", "Relative humidity", NULL},
235 {SR_MQ_TIME, 0, "time", "Time", NULL},
236 {SR_MQ_WIND_SPEED, 0, "wind_speed", "Wind speed", NULL},
237 {SR_MQ_PRESSURE, 0, "pressure", "Pressure", NULL},
238 {SR_MQ_PARALLEL_INDUCTANCE, 0, "parallel_inductance", "Parallel inductance", NULL},
239 {SR_MQ_PARALLEL_CAPACITANCE, 0, "parallel_capacitance", "Parallel capacitance", NULL},
240 {SR_MQ_PARALLEL_RESISTANCE, 0, "parallel_resistance", "Parallel resistance", NULL},
241 {SR_MQ_SERIES_INDUCTANCE, 0, "series_inductance", "Series inductance", NULL},
242 {SR_MQ_SERIES_CAPACITANCE, 0, "series_capacitance", "Series capacitance", NULL},
243 {SR_MQ_SERIES_RESISTANCE, 0, "series_resistance", "Series resistance", NULL},
244 {SR_MQ_DISSIPATION_FACTOR, 0, "dissipation_factor", "Dissipation factor", NULL},
245 {SR_MQ_QUALITY_FACTOR, 0, "quality_factor", "Quality factor", NULL},
246 {SR_MQ_PHASE_ANGLE, 0, "phase_angle", "Phase angle", NULL},
247 {SR_MQ_DIFFERENCE, 0, "difference", "Difference", NULL},
248 {SR_MQ_COUNT, 0, "count", "Count", NULL},
249 {SR_MQ_POWER_FACTOR, 0, "power_factor", "Power factor", NULL},
250 {SR_MQ_APPARENT_POWER, 0, "apparent_power", "Apparent power", NULL},
251 {SR_MQ_MASS, 0, "mass", "Mass", NULL},
252 {SR_MQ_HARMONIC_RATIO, 0, "harmonic_ratio", "Harmonic ratio", NULL},
256 /* Please use the same order as in enum sr_mqflag (libsigrok.h). */
257 static struct sr_key_info sr_key_info_mqflag[] = {
258 {SR_MQFLAG_AC, 0, "ac", "AC", NULL},
259 {SR_MQFLAG_DC, 0, "dc", "DC", NULL},
260 {SR_MQFLAG_RMS, 0, "rms", "RMS", NULL},
261 {SR_MQFLAG_DIODE, 0, "diode", "Diode", NULL},
262 {SR_MQFLAG_HOLD, 0, "hold", "Hold", NULL},
263 {SR_MQFLAG_MAX, 0, "max", "Max", NULL},
264 {SR_MQFLAG_MIN, 0, "min", "Min", NULL},
265 {SR_MQFLAG_AUTORANGE, 0, "auto_range", "Auto range", NULL},
266 {SR_MQFLAG_RELATIVE, 0, "relative", "Relative", NULL},
267 {SR_MQFLAG_SPL_FREQ_WEIGHT_A, 0, "spl_freq_weight_a",
268 "Frequency weighted (A)", NULL},
269 {SR_MQFLAG_SPL_FREQ_WEIGHT_C, 0, "spl_freq_weight_c",
270 "Frequency weighted (C)", NULL},
271 {SR_MQFLAG_SPL_FREQ_WEIGHT_Z, 0, "spl_freq_weight_z",
272 "Frequency weighted (Z)", NULL},
273 {SR_MQFLAG_SPL_FREQ_WEIGHT_FLAT, 0, "spl_freq_weight_flat",
274 "Frequency weighted (flat)", NULL},
275 {SR_MQFLAG_SPL_TIME_WEIGHT_S, 0, "spl_time_weight_s",
276 "Time weighted (S)", NULL},
277 {SR_MQFLAG_SPL_TIME_WEIGHT_F, 0, "spl_time_weight_f",
278 "Time weighted (F)", NULL},
279 {SR_MQFLAG_SPL_LAT, 0, "spl_time_average", "Time-averaged (LEQ)", NULL},
280 {SR_MQFLAG_SPL_PCT_OVER_ALARM, 0, "spl_pct_over_alarm",
281 "Percentage over alarm", NULL},
282 {SR_MQFLAG_DURATION, 0, "duration", "Duration", NULL},
283 {SR_MQFLAG_AVG, 0, "average", "Average", NULL},
284 {SR_MQFLAG_REFERENCE, 0, "reference", "Reference", NULL},
285 {SR_MQFLAG_UNSTABLE, 0, "unstable", "Unstable", NULL},
286 {SR_MQFLAG_FOUR_WIRE, 0, "four_wire", "4-Wire", NULL},
290 /* This must handle all the keys from enum sr_datatype (libsigrok.h). */
292 SR_PRIV const GVariantType *sr_variant_type_get(int datatype)
296 return G_VARIANT_TYPE_INT32;
298 return G_VARIANT_TYPE_UINT64;
300 return G_VARIANT_TYPE_STRING;
302 return G_VARIANT_TYPE_BOOLEAN;
304 return G_VARIANT_TYPE_DOUBLE;
305 case SR_T_RATIONAL_PERIOD:
306 case SR_T_RATIONAL_VOLT:
307 case SR_T_UINT64_RANGE:
308 case SR_T_DOUBLE_RANGE:
309 return G_VARIANT_TYPE_TUPLE;
311 return G_VARIANT_TYPE_DICTIONARY;
313 return G_VARIANT_TYPE_TUPLE;
320 SR_PRIV int sr_variant_type_check(uint32_t key, GVariant *value)
322 const struct sr_key_info *info;
323 const GVariantType *type, *expected;
324 char *expected_string, *type_string;
326 info = sr_key_info_get(SR_KEY_CONFIG, key);
330 expected = sr_variant_type_get(info->datatype);
331 type = g_variant_get_type(value);
332 if (!g_variant_type_equal(type, expected)
333 && !g_variant_type_is_subtype_of(type, expected)) {
334 expected_string = g_variant_type_dup_string(expected);
335 type_string = g_variant_type_dup_string(type);
336 sr_err("Wrong variant type for key '%s': expected '%s', got '%s'",
337 info->name, expected_string, type_string);
338 g_free(expected_string);
347 * Return the list of supported hardware drivers.
349 * @param[in] ctx Pointer to a libsigrok context struct. Must not be NULL.
351 * @retval NULL The ctx argument was NULL, or there are no supported drivers.
352 * @retval Other Pointer to the NULL-terminated list of hardware drivers.
353 * The user should NOT g_free() this list, sr_exit() will do that.
357 SR_API struct sr_dev_driver **sr_driver_list(const struct sr_context *ctx)
362 return ctx->driver_list;
366 * Initialize a hardware driver.
368 * This usually involves memory allocations and variable initializations
369 * within the driver, but _not_ scanning for attached devices.
370 * The API call sr_driver_scan() is used for that.
372 * @param ctx A libsigrok context object allocated by a previous call to
373 * sr_init(). Must not be NULL.
374 * @param driver The driver to initialize. This must be a pointer to one of
375 * the entries returned by sr_driver_list(). Must not be NULL.
377 * @retval SR_OK Success
378 * @retval SR_ERR_ARG Invalid parameter(s).
379 * @retval SR_ERR_BUG Internal errors.
380 * @retval other Another negative error code upon other errors.
384 SR_API int sr_driver_init(struct sr_context *ctx, struct sr_dev_driver *driver)
389 sr_err("Invalid libsigrok context, can't initialize.");
394 sr_err("Invalid driver, can't initialize.");
398 /* No log message here, too verbose and not very useful. */
400 if ((ret = driver->init(driver, ctx)) < 0)
401 sr_err("Failed to initialize the driver: %d.", ret);
407 * Enumerate scan options supported by this driver.
409 * Before calling sr_driver_scan_options_list(), the user must have previously
410 * initialized the driver by calling sr_driver_init().
412 * @param driver The driver to enumerate options for. This must be a pointer
413 * to one of the entries returned by sr_driver_list(). Must not
416 * @return A GArray * of uint32_t entries, or NULL on invalid arguments. Each
417 * entry is a configuration key that is supported as a scan option.
418 * The array must be freed by the caller using g_array_free().
422 SR_API GArray *sr_driver_scan_options_list(const struct sr_dev_driver *driver)
425 const uint32_t *opts;
429 if (sr_config_list(driver, NULL, NULL, SR_CONF_SCAN_OPTIONS, &gvar) != SR_OK)
432 opts = g_variant_get_fixed_array(gvar, &num_opts, sizeof(uint32_t));
434 result = g_array_sized_new(FALSE, FALSE, sizeof(uint32_t), num_opts);
436 g_array_insert_vals(result, 0, opts, num_opts);
438 g_variant_unref(gvar);
443 static int check_options(struct sr_dev_driver *driver, GSList *options,
444 uint32_t optlist_key, struct sr_dev_inst *sdi,
445 struct sr_channel_group *cg)
447 struct sr_config *src;
448 const struct sr_key_info *srci;
451 const uint32_t *opts;
455 if (sr_config_list(driver, sdi, cg, optlist_key, &gvar_opts) != SR_OK) {
456 /* Driver publishes no options for this optlist. */
461 opts = g_variant_get_fixed_array(gvar_opts, &num_opts, sizeof(uint32_t));
462 for (l = options; l; l = l->next) {
464 for (i = 0; i < num_opts; i++) {
465 if (opts[i] == src->key)
469 if (!(srci = sr_key_info_get(SR_KEY_CONFIG, src->key)))
470 /* Shouldn't happen. */
471 sr_err("Invalid option %d.", src->key);
473 sr_err("Invalid option '%s'.", srci->id);
477 if (sr_variant_type_check(src->key, src->data) != SR_OK) {
482 g_variant_unref(gvar_opts);
488 * Tell a hardware driver to scan for devices.
490 * In addition to the detection, the devices that are found are also
491 * initialized automatically. On some devices, this involves a firmware upload,
492 * or other such measures.
494 * The order in which the system is scanned for devices is not specified. The
495 * caller should not assume or rely on any specific order.
497 * Before calling sr_driver_scan(), the user must have previously initialized
498 * the driver by calling sr_driver_init().
500 * @param driver The driver that should scan. This must be a pointer to one of
501 * the entries returned by sr_driver_list(). Must not be NULL.
502 * @param options A list of 'struct sr_hwopt' options to pass to the driver's
503 * scanner. Can be NULL/empty.
505 * @return A GSList * of 'struct sr_dev_inst', or NULL if no devices were
506 * found (or errors were encountered). This list must be freed by the
507 * caller using g_slist_free(), but without freeing the data pointed
512 SR_API GSList *sr_driver_scan(struct sr_dev_driver *driver, GSList *options)
517 sr_err("Invalid driver, can't scan for devices.");
521 if (!driver->context) {
522 sr_err("Driver not initialized, can't scan for devices.");
527 if (check_options(driver, options, SR_CONF_SCAN_OPTIONS, NULL, NULL) != SR_OK)
531 l = driver->scan(driver, options);
533 sr_spew("Scan found %d devices (%s).", g_slist_length(l), driver->name);
539 * Call driver cleanup function for all drivers.
541 * @param[in] ctx Pointer to a libsigrok context struct. Must not be NULL.
545 SR_PRIV void sr_hw_cleanup_all(const struct sr_context *ctx)
548 struct sr_dev_driver **drivers;
553 sr_dbg("Cleaning up all drivers.");
555 drivers = sr_driver_list(ctx);
556 for (i = 0; drivers[i]; i++) {
557 if (drivers[i]->cleanup)
558 drivers[i]->cleanup(drivers[i]);
559 drivers[i]->context = NULL;
564 * Allocate struct sr_config.
566 * A floating reference can be passed in for data.
570 SR_PRIV struct sr_config *sr_config_new(uint32_t key, GVariant *data)
572 struct sr_config *src;
574 src = g_malloc0(sizeof(struct sr_config));
576 src->data = g_variant_ref_sink(data);
582 * Free struct sr_config.
586 SR_PRIV void sr_config_free(struct sr_config *src)
588 if (!src || !src->data) {
589 sr_err("%s: invalid data!", __func__);
593 g_variant_unref(src->data);
598 SR_PRIV int sr_dev_acquisition_start(struct sr_dev_inst *sdi)
600 if (!sdi || !sdi->driver) {
601 sr_err("%s: Invalid arguments.", __func__);
605 if (sdi->status != SR_ST_ACTIVE) {
606 sr_err("%s: Device instance not active, can't start.",
608 return SR_ERR_DEV_CLOSED;
611 sr_dbg("%s: Starting acquisition.", sdi->driver->name);
613 return sdi->driver->dev_acquisition_start(sdi);
617 SR_PRIV int sr_dev_acquisition_stop(struct sr_dev_inst *sdi)
619 if (!sdi || !sdi->driver) {
620 sr_err("%s: Invalid arguments.", __func__);
624 if (sdi->status != SR_ST_ACTIVE) {
625 sr_err("%s: Device instance not active, can't stop.",
627 return SR_ERR_DEV_CLOSED;
630 sr_dbg("%s: Stopping acquisition.", sdi->driver->name);
632 return sdi->driver->dev_acquisition_stop(sdi);
635 static void log_key(const struct sr_dev_inst *sdi,
636 const struct sr_channel_group *cg, uint32_t key, int op, GVariant *data)
639 const struct sr_key_info *srci;
642 /* Don't log SR_CONF_DEVICE_OPTIONS, it's verbose and not too useful. */
643 if (key == SR_CONF_DEVICE_OPTIONS)
646 opstr = op == SR_CONF_GET ? "get" : op == SR_CONF_SET ? "set" : "list";
647 srci = sr_key_info_get(SR_KEY_CONFIG, key);
649 tmp_str = g_variant_print(data, TRUE);
650 sr_spew("sr_config_%s(): key %d (%s) sdi %p cg %s -> %s", opstr, key,
651 srci ? srci->id : "NULL", sdi, cg ? cg->name : "NULL",
652 data ? tmp_str : "NULL");
656 static int check_key(const struct sr_dev_driver *driver,
657 const struct sr_dev_inst *sdi, const struct sr_channel_group *cg,
658 uint32_t key, int op, GVariant *data)
660 const struct sr_key_info *srci;
663 const uint32_t *opts;
669 suffix = " for this device and channel group";
671 suffix = " for this device";
675 if (!(srci = sr_key_info_get(SR_KEY_CONFIG, key))) {
676 sr_err("Invalid key %d.", key);
679 opstr = op == SR_CONF_GET ? "get" : op == SR_CONF_SET ? "set" : "list";
682 case SR_CONF_LIMIT_MSEC:
683 case SR_CONF_LIMIT_SAMPLES:
684 case SR_CONF_SAMPLERATE:
685 /* Setting any of these to 0 is not useful. */
686 if (op != SR_CONF_SET || !data)
688 if (g_variant_get_uint64(data) == 0) {
689 sr_err("Cannot set '%s' to 0.", srci->id);
695 if (sr_config_list(driver, sdi, cg, SR_CONF_DEVICE_OPTIONS, &gvar_opts) != SR_OK) {
696 /* Driver publishes no options. */
697 sr_err("No options available%s.", suffix);
700 opts = g_variant_get_fixed_array(gvar_opts, &num_opts, sizeof(uint32_t));
702 for (i = 0; i < num_opts; i++) {
703 if ((opts[i] & SR_CONF_MASK) == key) {
708 g_variant_unref(gvar_opts);
710 sr_err("Option '%s' not available%s.", srci->id, suffix);
714 if (!(pub_opt & op)) {
715 sr_err("Option '%s' not available to %s%s.", srci->id, opstr, suffix);
723 * Query value of a configuration key at the given driver or device instance.
725 * @param[in] driver The sr_dev_driver struct to query. Must not be NULL.
726 * @param[in] sdi (optional) If the key is specific to a device, this must
727 * contain a pointer to the struct sr_dev_inst to be checked.
728 * Otherwise it must be NULL. If sdi is != NULL, sdi->priv must
730 * @param[in] cg The channel group on the device for which to list the
732 * @param[in] key The configuration key (SR_CONF_*).
733 * @param[in,out] data Pointer to a GVariant where the value will be stored.
734 * Must not be NULL. The caller is given ownership of the GVariant
735 * and must thus decrease the refcount after use. However if
736 * this function returns an error code, the field should be
737 * considered unused, and should not be unreferenced.
739 * @retval SR_OK Success.
740 * @retval SR_ERR Error.
741 * @retval SR_ERR_ARG The driver doesn't know that key, but this is not to be
742 * interpreted as an error by the caller; merely as an indication
743 * that it's not applicable.
747 SR_API int sr_config_get(const struct sr_dev_driver *driver,
748 const struct sr_dev_inst *sdi,
749 const struct sr_channel_group *cg,
750 uint32_t key, GVariant **data)
754 if (!driver || !data)
757 if (!driver->config_get)
760 if (check_key(driver, sdi, cg, key, SR_CONF_GET, NULL) != SR_OK)
763 if (sdi && !sdi->priv) {
764 sr_err("Can't get config (sdi != NULL, sdi->priv == NULL).");
768 if ((ret = driver->config_get(key, data, sdi, cg)) == SR_OK) {
769 log_key(sdi, cg, key, SR_CONF_GET, *data);
770 /* Got a floating reference from the driver. Sink it here,
771 * caller will need to unref when done with it. */
772 g_variant_ref_sink(*data);
779 * Set value of a configuration key in a device instance.
781 * @param[in] sdi The device instance. Must not be NULL. sdi->driver and
782 * sdi->priv must not be NULL either.
783 * @param[in] cg The channel group on the device for which to list the
785 * @param[in] key The configuration key (SR_CONF_*).
786 * @param data The new value for the key, as a GVariant with GVariantType
787 * appropriate to that key. A floating reference can be passed
788 * in; its refcount will be sunk and unreferenced after use.
790 * @retval SR_OK Success.
791 * @retval SR_ERR Error.
792 * @retval SR_ERR_ARG The driver doesn't know that key, but this is not to be
793 * interpreted as an error by the caller; merely as an indication
794 * that it's not applicable.
798 SR_API int sr_config_set(const struct sr_dev_inst *sdi,
799 const struct sr_channel_group *cg,
800 uint32_t key, GVariant *data)
804 g_variant_ref_sink(data);
806 if (!sdi || !sdi->driver || !sdi->priv || !data)
808 else if (!sdi->driver->config_set)
810 else if (sdi->status != SR_ST_ACTIVE) {
811 sr_err("%s: Device instance not active, can't set config.",
813 ret = SR_ERR_DEV_CLOSED;
814 } else if (check_key(sdi->driver, sdi, cg, key, SR_CONF_SET, data) != SR_OK)
816 else if ((ret = sr_variant_type_check(key, data)) == SR_OK) {
817 log_key(sdi, cg, key, SR_CONF_SET, data);
818 ret = sdi->driver->config_set(key, data, sdi, cg);
821 g_variant_unref(data);
827 * Apply configuration settings to the device hardware.
829 * @param sdi The device instance.
831 * @return SR_OK upon success or SR_ERR in case of error.
835 SR_API int sr_config_commit(const struct sr_dev_inst *sdi)
839 if (!sdi || !sdi->driver)
841 else if (!sdi->driver->config_commit)
843 else if (sdi->status != SR_ST_ACTIVE) {
844 sr_err("%s: Device instance not active, can't commit config.",
846 ret = SR_ERR_DEV_CLOSED;
848 ret = sdi->driver->config_commit(sdi);
854 * List all possible values for a configuration key.
856 * @param[in] driver The sr_dev_driver struct to query. Must not be NULL.
857 * @param[in] sdi (optional) If the key is specific to a device instance, this
858 * must contain a pointer to the struct sr_dev_inst to be checked.
859 * Otherwise it must be NULL. If sdi is != NULL, sdi->priv must
861 * @param[in] cg The channel group on the device instance for which to list
862 * the values, or NULL. If this device instance doesn't
863 * have channel groups, this must not be != NULL.
864 * If cg is NULL, this function will return the "common" device
865 * instance options that are channel-group independent. Otherwise
866 * it will return the channel-group specific options.
867 * @param[in] key The configuration key (SR_CONF_*).
868 * @param[in,out] data A pointer to a GVariant where the list will be stored.
869 * The caller is given ownership of the GVariant and must thus
870 * unref the GVariant after use. However if this function
871 * returns an error code, the field should be considered
872 * unused, and should not be unreferenced.
874 * @retval SR_OK Success.
875 * @retval SR_ERR Error.
876 * @retval SR_ERR_ARG The driver doesn't know that key, but this is not to be
877 * interpreted as an error by the caller; merely as an indication
878 * that it's not applicable.
882 SR_API int sr_config_list(const struct sr_dev_driver *driver,
883 const struct sr_dev_inst *sdi,
884 const struct sr_channel_group *cg,
885 uint32_t key, GVariant **data)
889 if (!driver || !data)
892 if (!driver->config_list)
895 if (key != SR_CONF_SCAN_OPTIONS && key != SR_CONF_DEVICE_OPTIONS) {
896 if (check_key(driver, sdi, cg, key, SR_CONF_LIST, NULL) != SR_OK)
900 if (sdi && !sdi->priv) {
901 sr_err("Can't list config (sdi != NULL, sdi->priv == NULL).");
905 if (key != SR_CONF_SCAN_OPTIONS && key != SR_CONF_DEVICE_OPTIONS && !sdi) {
906 sr_err("Config keys other than SR_CONF_SCAN_OPTIONS and "
907 "SR_CONF_DEVICE_OPTIONS always need an sdi.");
911 if (cg && sdi && !sdi->channel_groups) {
912 sr_err("Can't list config for channel group, there are none.");
916 if (cg && sdi && !g_slist_find(sdi->channel_groups, cg)) {
917 sr_err("If a channel group is specified, it must be a valid one.");
922 sr_err("Need sdi when a channel group is specified.");
926 if ((ret = driver->config_list(key, data, sdi, cg)) == SR_OK) {
927 log_key(sdi, cg, key, SR_CONF_LIST, *data);
928 g_variant_ref_sink(*data);
931 if (ret == SR_ERR_CHANNEL_GROUP)
932 sr_err("%s: No channel group specified.",
933 (sdi) ? sdi->driver->name : "unknown");
938 static struct sr_key_info *get_keytable(int keytype)
940 struct sr_key_info *table;
944 table = sr_key_info_config;
947 table = sr_key_info_mq;
950 table = sr_key_info_mqflag;
953 sr_err("Invalid keytype %d", keytype);
961 * Get information about a key, by key.
963 * @param[in] keytype The namespace the key is in.
964 * @param[in] key The key to find.
966 * @return A pointer to a struct sr_key_info, or NULL if the key
971 SR_API const struct sr_key_info *sr_key_info_get(int keytype, uint32_t key)
973 struct sr_key_info *table;
976 if (!(table = get_keytable(keytype)))
979 for (i = 0; table[i].key; i++) {
980 if (table[i].key == key)
988 * Get information about a key, by name.
990 * @param[in] keytype The namespace the key is in.
991 * @param[in] keyid The key id string.
993 * @return A pointer to a struct sr_key_info, or NULL if the key
998 SR_API const struct sr_key_info *sr_key_info_name_get(int keytype, const char *keyid)
1000 struct sr_key_info *table;
1003 if (!(table = get_keytable(keytype)))
1006 for (i = 0; table[i].key; i++) {
1009 if (!strcmp(table[i].id, keyid))