2 * This file is part of the libsigrok project.
4 * Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
6 * This program is free software: you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation, either version 3 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program. If not, see <http://www.gnu.org/licenses/>.
22 #include <sys/types.h>
26 #include "config.h" /* Needed for HAVE_LIBUSB_1_0 and others. */
27 #include <libsigrok/libsigrok.h>
28 #include "libsigrok-internal.h"
31 #define LOG_PREFIX "hwdriver"
37 * Hardware driver handling in libsigrok.
41 * @defgroup grp_driver Hardware drivers
43 * Hardware driver handling in libsigrok.
48 /* Same key order/grouping as in enum sr_configkey (libsigrok.h). */
49 static struct sr_config_info sr_config_info_data[] = {
51 {SR_CONF_LOGIC_ANALYZER, SR_T_STRING, NULL, "Logic analyzer", NULL},
52 {SR_CONF_OSCILLOSCOPE, SR_T_STRING, NULL, "Oscilloscope", NULL},
53 {SR_CONF_MULTIMETER, SR_T_STRING, NULL, "Multimeter", NULL},
54 {SR_CONF_DEMO_DEV, SR_T_STRING, NULL, "Demo device", NULL},
55 {SR_CONF_SOUNDLEVELMETER, SR_T_STRING, NULL, "Sound level meter", NULL},
56 {SR_CONF_THERMOMETER, SR_T_STRING, NULL, "Thermometer", NULL},
57 {SR_CONF_HYGROMETER, SR_T_STRING, NULL, "Hygrometer", NULL},
58 {SR_CONF_ENERGYMETER, SR_T_STRING, NULL, "Energy meter", NULL},
59 {SR_CONF_DEMODULATOR, SR_T_STRING, NULL, "Demodulator", NULL},
60 {SR_CONF_POWER_SUPPLY, SR_T_STRING, NULL, "Power supply", NULL},
61 {SR_CONF_LCRMETER, SR_T_STRING, NULL, "LCR meter", NULL},
63 /* Driver scan options */
64 {SR_CONF_CONN, SR_T_STRING, "conn",
66 {SR_CONF_SERIALCOMM, SR_T_STRING, "serialcomm",
67 "Serial communication", NULL},
68 {SR_CONF_MODBUSADDR, SR_T_UINT64, "modbusaddr",
69 "Modbus slave address", NULL},
71 /* Device (or channel group) configuration */
72 {SR_CONF_SAMPLERATE, SR_T_UINT64, "samplerate",
74 {SR_CONF_CAPTURE_RATIO, SR_T_UINT64, "captureratio",
75 "Pre-trigger capture ratio", NULL},
76 {SR_CONF_PATTERN_MODE, SR_T_STRING, "pattern",
78 {SR_CONF_RLE, SR_T_BOOL, "rle",
79 "Run length encoding", NULL},
80 {SR_CONF_TRIGGER_SLOPE, SR_T_STRING, "triggerslope",
81 "Trigger slope", NULL},
82 {SR_CONF_AVERAGING, SR_T_BOOL, "averaging",
84 {SR_CONF_AVG_SAMPLES, SR_T_UINT64, "avg_samples",
85 "Number of samples to average over", NULL},
86 {SR_CONF_TRIGGER_SOURCE, SR_T_STRING, "triggersource",
87 "Trigger source", NULL},
88 {SR_CONF_HORIZ_TRIGGERPOS, SR_T_FLOAT, "horiz_triggerpos",
89 "Horizontal trigger position", NULL},
90 {SR_CONF_BUFFERSIZE, SR_T_UINT64, "buffersize",
92 {SR_CONF_TIMEBASE, SR_T_RATIONAL_PERIOD, "timebase",
94 {SR_CONF_FILTER, SR_T_BOOL, "filter",
96 {SR_CONF_VDIV, SR_T_RATIONAL_VOLT, "vdiv",
98 {SR_CONF_COUPLING, SR_T_STRING, "coupling",
100 {SR_CONF_TRIGGER_MATCH, SR_T_INT32, "triggermatch",
101 "Trigger matches", NULL},
102 {SR_CONF_SAMPLE_INTERVAL, SR_T_UINT64, "sample_interval",
103 "Sample interval", NULL},
104 {SR_CONF_NUM_HDIV, SR_T_INT32, "num_hdiv",
105 "Number of horizontal divisions", NULL},
106 {SR_CONF_NUM_VDIV, SR_T_INT32, "num_vdiv",
107 "Number of vertical divisions", NULL},
108 {SR_CONF_SPL_WEIGHT_FREQ, SR_T_STRING, "spl_weight_freq",
109 "Sound pressure level frequency weighting", NULL},
110 {SR_CONF_SPL_WEIGHT_TIME, SR_T_STRING, "spl_weight_time",
111 "Sound pressure level time weighting", NULL},
112 {SR_CONF_SPL_MEASUREMENT_RANGE, SR_T_UINT64_RANGE, "spl_meas_range",
113 "Sound pressure level measurement range", NULL},
114 {SR_CONF_HOLD_MAX, SR_T_BOOL, "hold_max",
116 {SR_CONF_HOLD_MIN, SR_T_BOOL, "hold_min",
118 {SR_CONF_VOLTAGE_THRESHOLD, SR_T_DOUBLE_RANGE, "voltage_threshold",
119 "Voltage threshold", NULL },
120 {SR_CONF_EXTERNAL_CLOCK, SR_T_BOOL, "external_clock",
121 "External clock mode", NULL},
122 {SR_CONF_SWAP, SR_T_BOOL, "swap",
123 "Swap channel order", NULL},
124 {SR_CONF_CENTER_FREQUENCY, SR_T_UINT64, "center_frequency",
125 "Center frequency", NULL},
126 {SR_CONF_NUM_LOGIC_CHANNELS, SR_T_INT32, "logic_channels",
127 "Number of logic channels", NULL},
128 {SR_CONF_NUM_ANALOG_CHANNELS, SR_T_INT32, "analog_channels",
129 "Number of analog channels", NULL},
130 {SR_CONF_VOLTAGE, SR_T_FLOAT, "voltage",
131 "Current voltage", NULL},
132 {SR_CONF_VOLTAGE_TARGET, SR_T_FLOAT, "voltage_target",
133 "Voltage target", NULL},
134 {SR_CONF_CURRENT, SR_T_FLOAT, "current",
135 "Current current", NULL},
136 {SR_CONF_CURRENT_LIMIT, SR_T_FLOAT, "current_limit",
137 "Current limit", NULL},
138 {SR_CONF_ENABLED, SR_T_BOOL, "enabled",
139 "Channel enabled", NULL},
140 {SR_CONF_CHANNEL_CONFIG, SR_T_STRING, "channel_config",
141 "Channel modes", NULL},
142 {SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED, SR_T_BOOL, "ovp_enabled",
143 "Over-voltage protection enabled", NULL},
144 {SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE, SR_T_BOOL, "ovp_active",
145 "Over-voltage protection active", NULL},
146 {SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD, SR_T_FLOAT, "ovp_threshold",
147 "Over-voltage protection threshold", NULL},
148 {SR_CONF_OVER_CURRENT_PROTECTION_ENABLED, SR_T_BOOL, "ocp_enabled",
149 "Over-current protection enabled", NULL},
150 {SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE, SR_T_BOOL, "ocp_active",
151 "Over-current protection active", NULL},
152 {SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD, SR_T_FLOAT, "ocp_threshold",
153 "Over-current protection threshold", NULL},
154 {SR_CONF_CLOCK_EDGE, SR_T_STRING, "clock_edge",
156 {SR_CONF_AMPLITUDE, SR_T_FLOAT, "amplitude",
158 {SR_CONF_REGULATION, SR_T_STRING, "regulation",
159 "Channel regulation", NULL},
160 {SR_CONF_OVER_TEMPERATURE_PROTECTION, SR_T_BOOL, "otp",
161 "Over-temperature protection", NULL},
162 {SR_CONF_OUTPUT_FREQUENCY, SR_T_FLOAT, "output_frequency",
163 "Output frequency", NULL},
164 {SR_CONF_OUTPUT_FREQUENCY_TARGET, SR_T_FLOAT, "output_frequency_target",
165 "Output frequency target", NULL},
166 {SR_CONF_MEASURED_QUANTITY, SR_T_STRING, "measured_quantity",
167 "Measured quantity", NULL},
168 {SR_CONF_MEASURED_2ND_QUANTITY, SR_T_STRING, "measured_2nd_quantity",
169 "Measured secondary quantity", NULL},
170 {SR_CONF_EQUIV_CIRCUIT_MODEL, SR_T_STRING, "equiv_circuit_model",
171 "Equivalent circuit model", NULL},
172 {SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE, SR_T_BOOL, "otp_active",
173 "Over-temperature protection active", NULL},
176 {SR_CONF_SCAN_OPTIONS, SR_T_STRING, "scan_options",
177 "Scan options", NULL},
178 {SR_CONF_DEVICE_OPTIONS, SR_T_STRING, "device_options",
179 "Device options", NULL},
180 {SR_CONF_SESSIONFILE, SR_T_STRING, "sessionfile",
181 "Session file", NULL},
182 {SR_CONF_CAPTUREFILE, SR_T_STRING, "capturefile",
183 "Capture file", NULL},
184 {SR_CONF_CAPTURE_UNITSIZE, SR_T_UINT64, "capture_unitsize",
185 "Capture unitsize", NULL},
186 {SR_CONF_POWER_OFF, SR_T_BOOL, "power_off",
188 {SR_CONF_DATA_SOURCE, SR_T_STRING, "data_source",
189 "Data source", NULL},
190 {SR_CONF_PROBE_FACTOR, SR_T_UINT64, "probe_factor",
191 "Probe factor", NULL},
193 /* Acquisition modes, sample limiting */
194 {SR_CONF_LIMIT_MSEC, SR_T_UINT64, "limit_time",
196 {SR_CONF_LIMIT_SAMPLES, SR_T_UINT64, "limit_samples",
197 "Sample limit", NULL},
198 {SR_CONF_LIMIT_FRAMES, SR_T_UINT64, "limit_frames",
199 "Frame limit", NULL},
200 {SR_CONF_CONTINUOUS, SR_T_UINT64, "continuous",
201 "Continuous sampling", NULL},
202 {SR_CONF_DATALOG, SR_T_BOOL, "datalog",
204 {SR_CONF_DEVICE_MODE, SR_T_STRING, "device_mode",
205 "Device mode", NULL},
206 {SR_CONF_TEST_MODE, SR_T_STRING, "test_mode",
209 {0, 0, NULL, NULL, NULL},
212 SR_PRIV const GVariantType *sr_variant_type_get(int datatype)
216 return G_VARIANT_TYPE_INT32;
218 return G_VARIANT_TYPE_UINT64;
220 return G_VARIANT_TYPE_STRING;
222 return G_VARIANT_TYPE_BOOLEAN;
224 return G_VARIANT_TYPE_DOUBLE;
225 case SR_T_RATIONAL_PERIOD:
226 case SR_T_RATIONAL_VOLT:
227 case SR_T_UINT64_RANGE:
228 case SR_T_DOUBLE_RANGE:
229 return G_VARIANT_TYPE_TUPLE;
231 return G_VARIANT_TYPE_DICTIONARY;
237 SR_PRIV int sr_variant_type_check(uint32_t key, GVariant *value)
239 const struct sr_config_info *info;
240 const GVariantType *type, *expected;
241 char *expected_string, *type_string;
243 info = sr_config_info_get(key);
247 expected = sr_variant_type_get(info->datatype);
248 type = g_variant_get_type(value);
249 if (!g_variant_type_equal(type, expected)
250 && !g_variant_type_is_subtype_of(type, expected)) {
251 expected_string = g_variant_type_dup_string(expected);
252 type_string = g_variant_type_dup_string(type);
253 sr_err("Wrong variant type for key '%s': expected '%s', got '%s'",
254 info->name, expected_string, type_string);
255 g_free(expected_string);
264 * Return the list of supported hardware drivers.
266 * @param[in] ctx Pointer to a libsigrok context struct. Must not be NULL.
268 * @retval NULL The ctx argument was NULL, or there are no supported drivers.
269 * @retval Other Pointer to the NULL-terminated list of hardware drivers.
270 * The user should NOT g_free() this list, sr_exit() will do that.
274 SR_API struct sr_dev_driver **sr_driver_list(const struct sr_context *ctx)
279 return ctx->driver_list;
283 * Initialize a hardware driver.
285 * This usually involves memory allocations and variable initializations
286 * within the driver, but _not_ scanning for attached devices.
287 * The API call sr_driver_scan() is used for that.
289 * @param ctx A libsigrok context object allocated by a previous call to
290 * sr_init(). Must not be NULL.
291 * @param driver The driver to initialize. This must be a pointer to one of
292 * the entries returned by sr_driver_list(). Must not be NULL.
294 * @retval SR_OK Success
295 * @retval SR_ERR_ARG Invalid parameter(s).
296 * @retval SR_ERR_BUG Internal errors.
297 * @retval other Another negative error code upon other errors.
301 SR_API int sr_driver_init(struct sr_context *ctx, struct sr_dev_driver *driver)
306 sr_err("Invalid libsigrok context, can't initialize.");
311 sr_err("Invalid driver, can't initialize.");
315 sr_spew("Initializing driver '%s'.", driver->name);
316 if ((ret = driver->init(driver, ctx)) < 0)
317 sr_err("Failed to initialize the driver: %d.", ret);
322 static int check_options(struct sr_dev_driver *driver, GSList *options,
323 uint32_t optlist_key, struct sr_dev_inst *sdi,
324 struct sr_channel_group *cg)
326 struct sr_config *src;
327 const struct sr_config_info *srci;
330 const uint32_t *opts;
334 if (sr_config_list(driver, sdi, cg, optlist_key, &gvar_opts) != SR_OK) {
335 /* Driver publishes no options for this optlist. */
340 opts = g_variant_get_fixed_array(gvar_opts, &num_opts, sizeof(uint32_t));
341 for (l = options; l; l = l->next) {
343 for (i = 0; i < num_opts; i++) {
344 if (opts[i] == src->key)
348 if (!(srci = sr_config_info_get(src->key)))
349 /* Shouldn't happen. */
350 sr_err("Invalid option %d.", src->key);
352 sr_err("Invalid option '%s'.", srci->id);
356 if (sr_variant_type_check(src->key, src->data) != SR_OK) {
361 g_variant_unref(gvar_opts);
367 * Tell a hardware driver to scan for devices.
369 * In addition to the detection, the devices that are found are also
370 * initialized automatically. On some devices, this involves a firmware upload,
371 * or other such measures.
373 * The order in which the system is scanned for devices is not specified. The
374 * caller should not assume or rely on any specific order.
376 * Before calling sr_driver_scan(), the user must have previously initialized
377 * the driver by calling sr_driver_init().
379 * @param driver The driver that should scan. This must be a pointer to one of
380 * the entries returned by sr_driver_list(). Must not be NULL.
381 * @param options A list of 'struct sr_hwopt' options to pass to the driver's
382 * scanner. Can be NULL/empty.
384 * @return A GSList * of 'struct sr_dev_inst', or NULL if no devices were
385 * found (or errors were encountered). This list must be freed by the
386 * caller using g_slist_free(), but without freeing the data pointed
391 SR_API GSList *sr_driver_scan(struct sr_dev_driver *driver, GSList *options)
396 sr_err("Invalid driver, can't scan for devices.");
400 if (!driver->context) {
401 sr_err("Driver not initialized, can't scan for devices.");
406 if (check_options(driver, options, SR_CONF_SCAN_OPTIONS, NULL, NULL) != SR_OK)
410 l = driver->scan(driver, options);
412 sr_spew("Scan of '%s' found %d devices.", driver->name,
419 * Call driver cleanup function for all drivers.
421 * @param[in] ctx Pointer to a libsigrok context struct. Must not be NULL.
425 SR_PRIV void sr_hw_cleanup_all(const struct sr_context *ctx)
428 struct sr_dev_driver **drivers;
433 drivers = sr_driver_list(ctx);
434 for (i = 0; drivers[i]; i++) {
435 if (drivers[i]->cleanup)
436 drivers[i]->cleanup(drivers[i]);
437 drivers[i]->context = NULL;
441 /** Allocate struct sr_config.
442 * A floating reference can be passed in for data.
445 SR_PRIV struct sr_config *sr_config_new(uint32_t key, GVariant *data)
447 struct sr_config *src;
449 src = g_malloc0(sizeof(struct sr_config));
451 src->data = g_variant_ref_sink(data);
456 /** Free struct sr_config.
459 SR_PRIV void sr_config_free(struct sr_config *src)
462 if (!src || !src->data) {
463 sr_err("%s: invalid data!", __func__);
467 g_variant_unref(src->data);
472 static void log_key(const struct sr_dev_inst *sdi,
473 const struct sr_channel_group *cg, uint32_t key, int op, GVariant *data)
476 const struct sr_config_info *srci;
478 /* Don't log SR_CONF_DEVICE_OPTIONS, it's verbose and not too useful. */
479 if (key == SR_CONF_DEVICE_OPTIONS)
482 opstr = op == SR_CONF_GET ? "get" : op == SR_CONF_SET ? "set" : "list";
483 srci = sr_config_info_get(key);
485 sr_spew("sr_config_%s(): key %d (%s) sdi %p cg %s -> %s", opstr, key,
486 srci ? srci->id : "NULL", sdi, cg ? cg->name : "NULL",
487 data ? g_variant_print(data, TRUE) : "NULL");
490 static int check_key(const struct sr_dev_driver *driver,
491 const struct sr_dev_inst *sdi, const struct sr_channel_group *cg,
492 uint32_t key, int op, GVariant *data)
494 const struct sr_config_info *srci;
497 const uint32_t *opts;
499 char *suffix, *opstr;
502 suffix = " for this device and channel group";
504 suffix = " for this device";
508 if (!(srci = sr_config_info_get(key))) {
509 sr_err("Invalid key %d.", key);
512 opstr = op == SR_CONF_GET ? "get" : op == SR_CONF_SET ? "set" : "list";
515 case SR_CONF_LIMIT_MSEC:
516 case SR_CONF_LIMIT_SAMPLES:
517 case SR_CONF_SAMPLERATE:
518 /* Setting any of these to 0 is not useful. */
519 if (op != SR_CONF_SET || !data)
521 if (g_variant_get_uint64(data) == 0) {
522 sr_err("Cannot set '%s' to 0.", srci->id);
528 if (sr_config_list(driver, sdi, cg, SR_CONF_DEVICE_OPTIONS, &gvar_opts) != SR_OK) {
529 /* Driver publishes no options. */
530 sr_err("No options available%s.", srci->id, suffix);
533 opts = g_variant_get_fixed_array(gvar_opts, &num_opts, sizeof(uint32_t));
535 for (i = 0; i < num_opts; i++) {
536 if ((opts[i] & SR_CONF_MASK) == key) {
541 g_variant_unref(gvar_opts);
543 sr_err("Option '%s' not available%s.", srci->id, suffix);
547 if (!(pub_opt & op)) {
548 sr_err("Option '%s' not available to %s%s.", srci->id, opstr, suffix);
556 * Query value of a configuration key at the given driver or device instance.
558 * @param[in] driver The sr_dev_driver struct to query.
559 * @param[in] sdi (optional) If the key is specific to a device, this must
560 * contain a pointer to the struct sr_dev_inst to be checked.
561 * Otherwise it must be NULL.
562 * @param[in] cg The channel group on the device for which to list the
564 * @param[in] key The configuration key (SR_CONF_*).
565 * @param[in,out] data Pointer to a GVariant where the value will be stored.
566 * Must not be NULL. The caller is given ownership of the GVariant
567 * and must thus decrease the refcount after use. However if
568 * this function returns an error code, the field should be
569 * considered unused, and should not be unreferenced.
571 * @retval SR_OK Success.
572 * @retval SR_ERR Error.
573 * @retval SR_ERR_ARG The driver doesn't know that key, but this is not to be
574 * interpreted as an error by the caller; merely as an indication
575 * that it's not applicable.
579 SR_API int sr_config_get(const struct sr_dev_driver *driver,
580 const struct sr_dev_inst *sdi,
581 const struct sr_channel_group *cg,
582 uint32_t key, GVariant **data)
586 if (!driver || !data)
589 if (!driver->config_get)
592 if (check_key(driver, sdi, cg, key, SR_CONF_GET, NULL) != SR_OK)
595 if ((ret = driver->config_get(key, data, sdi, cg)) == SR_OK) {
596 log_key(sdi, cg, key, SR_CONF_GET, *data);
597 /* Got a floating reference from the driver. Sink it here,
598 * caller will need to unref when done with it. */
599 g_variant_ref_sink(*data);
606 * Set value of a configuration key in a device instance.
608 * @param[in] sdi The device instance.
609 * @param[in] cg The channel group on the device for which to list the
611 * @param[in] key The configuration key (SR_CONF_*).
612 * @param data The new value for the key, as a GVariant with GVariantType
613 * appropriate to that key. A floating reference can be passed
614 * in; its refcount will be sunk and unreferenced after use.
616 * @retval SR_OK Success.
617 * @retval SR_ERR Error.
618 * @retval SR_ERR_ARG The driver doesn't know that key, but this is not to be
619 * interpreted as an error by the caller; merely as an indication
620 * that it's not applicable.
624 SR_API int sr_config_set(const struct sr_dev_inst *sdi,
625 const struct sr_channel_group *cg,
626 uint32_t key, GVariant *data)
630 g_variant_ref_sink(data);
632 if (!sdi || !sdi->driver || !data)
634 else if (!sdi->driver->config_set)
636 else if (check_key(sdi->driver, sdi, cg, key, SR_CONF_SET, data) != SR_OK)
638 else if ((ret = sr_variant_type_check(key, data)) == SR_OK) {
639 log_key(sdi, cg, key, SR_CONF_SET, data);
640 ret = sdi->driver->config_set(key, data, sdi, cg);
643 g_variant_unref(data);
649 * Apply configuration settings to the device hardware.
651 * @param sdi The device instance.
653 * @return SR_OK upon success or SR_ERR in case of error.
657 SR_API int sr_config_commit(const struct sr_dev_inst *sdi)
661 if (!sdi || !sdi->driver)
663 else if (!sdi->driver->config_commit)
666 ret = sdi->driver->config_commit(sdi);
672 * List all possible values for a configuration key.
674 * @param[in] driver The sr_dev_driver struct to query.
675 * @param[in] sdi (optional) If the key is specific to a device, this must
676 * contain a pointer to the struct sr_dev_inst to be checked.
677 * @param[in] cg The channel group on the device for which to list the
679 * @param[in] key The configuration key (SR_CONF_*).
680 * @param[in,out] data A pointer to a GVariant where the list will be stored.
681 * The caller is given ownership of the GVariant and must thus
682 * unref the GVariant after use. However if this function
683 * returns an error code, the field should be considered
684 * unused, and should not be unreferenced.
686 * @retval SR_OK Success.
687 * @retval SR_ERR Error.
688 * @retval SR_ERR_ARG The driver doesn't know that key, but this is not to be
689 * interpreted as an error by the caller; merely as an indication
690 * that it's not applicable.
694 SR_API int sr_config_list(const struct sr_dev_driver *driver,
695 const struct sr_dev_inst *sdi,
696 const struct sr_channel_group *cg,
697 uint32_t key, GVariant **data)
701 if (!driver || !data)
703 else if (!driver->config_list)
705 else if (key != SR_CONF_SCAN_OPTIONS && key != SR_CONF_DEVICE_OPTIONS) {
706 if (check_key(driver, sdi, cg, key, SR_CONF_LIST, NULL) != SR_OK)
709 if ((ret = driver->config_list(key, data, sdi, cg)) == SR_OK) {
710 log_key(sdi, cg, key, SR_CONF_LIST, *data);
711 g_variant_ref_sink(*data);
718 * Get information about a configuration key, by key.
720 * @param[in] key The configuration key.
722 * @return A pointer to a struct sr_config_info, or NULL if the key
727 SR_API const struct sr_config_info *sr_config_info_get(uint32_t key)
731 for (i = 0; sr_config_info_data[i].key; i++) {
732 if (sr_config_info_data[i].key == key)
733 return &sr_config_info_data[i];
740 * Get information about a configuration key, by name.
742 * @param[in] optname The configuration key.
744 * @return A pointer to a struct sr_config_info, or NULL if the key
749 SR_API const struct sr_config_info *sr_config_info_name_get(const char *optname)
753 for (i = 0; sr_config_info_data[i].key; i++) {
754 if (!sr_config_info_data[i].id)
756 if (!strcmp(sr_config_info_data[i].id, optname))
757 return &sr_config_info_data[i];