2 * This file is part of the libsigrok project.
4 * Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
6 * This program is free software: you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation, either version 3 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program. If not, see <http://www.gnu.org/licenses/>.
23 #define SERIALCOMM "115200/8n1"
25 static const uint32_t drvopts[] = {
26 SR_CONF_LOGIC_ANALYZER,
29 static const uint32_t scanopts[] = {
34 static const uint32_t devopts[] = {
35 SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
36 SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
37 SR_CONF_TRIGGER_MATCH | SR_CONF_LIST,
38 SR_CONF_CAPTURE_RATIO | SR_CONF_GET | SR_CONF_SET,
39 SR_CONF_EXTERNAL_CLOCK | SR_CONF_SET,
40 SR_CONF_PATTERN_MODE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
41 SR_CONF_SWAP | SR_CONF_SET,
42 SR_CONF_RLE | SR_CONF_GET | SR_CONF_SET,
45 static const int32_t trigger_matches[] = {
50 #define STR_PATTERN_NONE "None"
51 #define STR_PATTERN_EXTERNAL "External"
52 #define STR_PATTERN_INTERNAL "Internal"
54 /* Supported methods of test pattern outputs */
57 * Capture pins 31:16 (unbuffered wing) output a test pattern
58 * that can captured on pins 0:15.
62 /** Route test pattern internally to capture buffer. */
66 static const char *patterns[] = {
72 /* Channels are numbered 0-31 (on the PCB silkscreen). */
73 SR_PRIV const char *ols_channel_names[] = {
74 "0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12",
75 "13", "14", "15", "16", "17", "18", "19", "20", "21", "22", "23",
76 "24", "25", "26", "27", "28", "29", "30", "31",
79 /* Default supported samplerates, can be overridden by device metadata. */
80 static const uint64_t samplerates[] = {
86 #define RESPONSE_DELAY_US (10 * 1000)
88 SR_PRIV struct sr_dev_driver ols_driver_info;
90 static int init(struct sr_dev_driver *di, struct sr_context *sr_ctx)
92 return std_init(sr_ctx, di, LOG_PREFIX);
95 static GSList *scan(struct sr_dev_driver *di, GSList *options)
97 struct sr_config *src;
98 struct sr_dev_inst *sdi;
99 struct drv_context *drvc;
100 struct sr_serial_dev_inst *serial;
104 const char *conn, *serialcomm;
111 conn = serialcomm = NULL;
112 for (l = options; l; l = l->next) {
116 conn = g_variant_get_string(src->data, NULL);
118 case SR_CONF_SERIALCOMM:
119 serialcomm = g_variant_get_string(src->data, NULL);
127 serialcomm = SERIALCOMM;
129 serial = sr_serial_dev_inst_new(conn, serialcomm);
131 /* The discovery procedure is like this: first send the Reset
132 * command (0x00) 5 times, since the device could be anywhere
133 * in a 5-byte command. Then send the ID command (0x02).
134 * If the device responds with 4 bytes ("OLS1" or "SLA1"), we
137 sr_info("Probing %s.", conn);
138 if (serial_open(serial, SERIAL_RDWR) != SR_OK)
142 for (i = 0; i < 5; i++) {
143 if ((ret = send_shortcommand(serial, CMD_RESET)) != SR_OK) {
144 sr_err("Port %s is not writable.", conn);
149 serial_close(serial);
150 sr_err("Could not use port %s. Quitting.", conn);
153 send_shortcommand(serial, CMD_ID);
155 g_usleep(RESPONSE_DELAY_US);
157 if (sp_input_waiting(serial->data) == 0) {
158 sr_dbg("Didn't get any reply.");
162 ret = serial_read_blocking(serial, buf, 4, serial_timeout(serial, 4));
164 sr_err("Invalid reply (expected 4 bytes, got %d).", ret);
168 if (strncmp(buf, "1SLO", 4) && strncmp(buf, "1ALS", 4)) {
169 sr_err("Invalid reply (expected '1SLO' or '1ALS', got "
170 "'%c%c%c%c').", buf[0], buf[1], buf[2], buf[3]);
174 /* Definitely using the OLS protocol, check if it supports
175 * the metadata command.
177 send_shortcommand(serial, CMD_METADATA);
179 g_usleep(RESPONSE_DELAY_US);
181 if (sp_input_waiting(serial->data) != 0) {
183 sdi = get_metadata(serial);
185 /* Not an OLS -- some other board that uses the sump protocol. */
186 sr_info("Device does not support metadata.");
187 sdi = g_malloc0(sizeof(struct sr_dev_inst));
188 sdi->status = SR_ST_INACTIVE;
189 sdi->vendor = g_strdup("Sump");
190 sdi->model = g_strdup("Logic Analyzer");
191 sdi->version = g_strdup("v1.0");
193 for (i = 0; i < ARRAY_SIZE(ols_channel_names); i++)
194 sr_channel_new(sdi, i, SR_CHANNEL_LOGIC, TRUE,
195 ols_channel_names[i]);
196 sdi->priv = ols_dev_new();
198 /* Configure samplerate and divider. */
199 if (ols_set_samplerate(sdi, DEFAULT_SAMPLERATE) != SR_OK)
200 sr_dbg("Failed to set default samplerate (%"PRIu64").",
202 sdi->inst_type = SR_INST_SERIAL;
205 drvc->instances = g_slist_append(drvc->instances, sdi);
206 devices = g_slist_append(devices, sdi);
208 serial_close(serial);
213 static GSList *dev_list(const struct sr_dev_driver *di)
215 return ((struct drv_context *)(di->context))->instances;
218 static int cleanup(const struct sr_dev_driver *di)
220 return std_dev_clear(di, NULL);
223 static int config_get(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi,
224 const struct sr_channel_group *cg)
226 struct dev_context *devc;
235 case SR_CONF_SAMPLERATE:
236 *data = g_variant_new_uint64(devc->cur_samplerate);
238 case SR_CONF_CAPTURE_RATIO:
239 *data = g_variant_new_uint64(devc->capture_ratio);
241 case SR_CONF_LIMIT_SAMPLES:
242 *data = g_variant_new_uint64(devc->limit_samples);
244 case SR_CONF_PATTERN_MODE:
245 if (devc->flag_reg & FLAG_EXTERNAL_TEST_MODE)
246 *data = g_variant_new_string(STR_PATTERN_EXTERNAL);
247 else if (devc->flag_reg & FLAG_INTERNAL_TEST_MODE)
248 *data = g_variant_new_string(STR_PATTERN_INTERNAL);
250 *data = g_variant_new_string(STR_PATTERN_NONE);
253 *data = g_variant_new_boolean(devc->flag_reg & FLAG_RLE ? TRUE : FALSE);
262 static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sdi,
263 const struct sr_channel_group *cg)
265 struct dev_context *devc;
273 if (sdi->status != SR_ST_ACTIVE)
274 return SR_ERR_DEV_CLOSED;
279 case SR_CONF_SAMPLERATE:
280 tmp_u64 = g_variant_get_uint64(data);
281 if (tmp_u64 < samplerates[0] || tmp_u64 > samplerates[1])
282 return SR_ERR_SAMPLERATE;
283 ret = ols_set_samplerate(sdi, g_variant_get_uint64(data));
285 case SR_CONF_LIMIT_SAMPLES:
286 tmp_u64 = g_variant_get_uint64(data);
287 if (tmp_u64 < MIN_NUM_SAMPLES)
289 devc->limit_samples = tmp_u64;
292 case SR_CONF_CAPTURE_RATIO:
293 devc->capture_ratio = g_variant_get_uint64(data);
294 if (devc->capture_ratio < 0 || devc->capture_ratio > 100)
299 case SR_CONF_EXTERNAL_CLOCK:
300 if (g_variant_get_boolean(data)) {
301 sr_info("Enabling external clock.");
302 devc->flag_reg |= FLAG_CLOCK_EXTERNAL;
304 sr_info("Disabled external clock.");
305 devc->flag_reg &= ~FLAG_CLOCK_EXTERNAL;
309 case SR_CONF_PATTERN_MODE:
310 stropt = g_variant_get_string(data, NULL);
313 if (!strcmp(stropt, STR_PATTERN_NONE)) {
314 sr_info("Disabling test modes.");
316 }else if (!strcmp(stropt, STR_PATTERN_INTERNAL)) {
317 sr_info("Enabling internal test mode.");
318 flag = FLAG_INTERNAL_TEST_MODE;
319 } else if (!strcmp(stropt, STR_PATTERN_EXTERNAL)) {
320 sr_info("Enabling external test mode.");
321 flag = FLAG_EXTERNAL_TEST_MODE;
325 if (flag != 0xffff) {
326 devc->flag_reg &= ~(FLAG_INTERNAL_TEST_MODE | FLAG_EXTERNAL_TEST_MODE);
327 devc->flag_reg |= flag;
331 if (g_variant_get_boolean(data)) {
332 sr_info("Enabling channel swapping.");
333 devc->flag_reg |= FLAG_SWAP_CHANNELS;
335 sr_info("Disabling channel swapping.");
336 devc->flag_reg &= ~FLAG_SWAP_CHANNELS;
342 if (g_variant_get_boolean(data)) {
343 sr_info("Enabling RLE.");
344 devc->flag_reg |= FLAG_RLE;
346 sr_info("Disabling RLE.");
347 devc->flag_reg &= ~FLAG_RLE;
358 static int config_list(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi,
359 const struct sr_channel_group *cg)
361 struct dev_context *devc;
362 GVariant *gvar, *grange[2];
364 int num_ols_changrp, i;
369 case SR_CONF_SCAN_OPTIONS:
370 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
371 scanopts, ARRAY_SIZE(scanopts), sizeof(uint32_t));
373 case SR_CONF_DEVICE_OPTIONS:
375 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
376 drvopts, ARRAY_SIZE(drvopts), sizeof(uint32_t));
378 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
379 devopts, ARRAY_SIZE(devopts), sizeof(uint32_t));
381 case SR_CONF_SAMPLERATE:
382 g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}"));
383 gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), samplerates,
384 ARRAY_SIZE(samplerates), sizeof(uint64_t));
385 g_variant_builder_add(&gvb, "{sv}", "samplerate-steps", gvar);
386 *data = g_variant_builder_end(&gvb);
388 case SR_CONF_TRIGGER_MATCH:
389 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
390 trigger_matches, ARRAY_SIZE(trigger_matches),
393 case SR_CONF_PATTERN_MODE:
394 *data = g_variant_new_strv(patterns, ARRAY_SIZE(patterns));
396 case SR_CONF_LIMIT_SAMPLES:
400 if (devc->flag_reg & FLAG_RLE)
402 if (devc->max_samples == 0)
403 /* Device didn't specify sample memory size in metadata. */
406 * Channel groups are turned off if no channels in that group are
407 * enabled, making more room for samples for the enabled group.
409 ols_channel_mask(sdi);
411 for (i = 0; i < 4; i++) {
412 if (devc->channel_mask & (0xff << (i * 8)))
415 grange[0] = g_variant_new_uint64(MIN_NUM_SAMPLES);
417 grange[1] = g_variant_new_uint64(devc->max_samples / num_ols_changrp);
419 grange[1] = g_variant_new_uint64(MIN_NUM_SAMPLES);
420 *data = g_variant_new_tuple(grange, 2);
429 static int set_trigger(const struct sr_dev_inst *sdi, int stage)
431 struct dev_context *devc;
432 struct sr_serial_dev_inst *serial;
438 cmd = CMD_SET_TRIGGER_MASK + stage * 4;
439 arg[0] = devc->trigger_mask[stage] & 0xff;
440 arg[1] = (devc->trigger_mask[stage] >> 8) & 0xff;
441 arg[2] = (devc->trigger_mask[stage] >> 16) & 0xff;
442 arg[3] = (devc->trigger_mask[stage] >> 24) & 0xff;
443 if (send_longcommand(serial, cmd, arg) != SR_OK)
446 cmd = CMD_SET_TRIGGER_VALUE + stage * 4;
447 arg[0] = devc->trigger_value[stage] & 0xff;
448 arg[1] = (devc->trigger_value[stage] >> 8) & 0xff;
449 arg[2] = (devc->trigger_value[stage] >> 16) & 0xff;
450 arg[3] = (devc->trigger_value[stage] >> 24) & 0xff;
451 if (send_longcommand(serial, cmd, arg) != SR_OK)
454 cmd = CMD_SET_TRIGGER_CONFIG + stage * 4;
455 arg[0] = arg[1] = arg[3] = 0x00;
457 if (stage == devc->num_stages)
458 /* Last stage, fire when this one matches. */
459 arg[3] |= TRIGGER_START;
460 if (send_longcommand(serial, cmd, arg) != SR_OK)
466 static int dev_acquisition_start(const struct sr_dev_inst *sdi,
469 struct dev_context *devc;
470 struct sr_serial_dev_inst *serial;
471 uint16_t samplecount, readcount, delaycount;
472 uint8_t ols_changrp_mask, arg[4];
476 if (sdi->status != SR_ST_ACTIVE)
477 return SR_ERR_DEV_CLOSED;
482 ols_channel_mask(sdi);
485 ols_changrp_mask = 0;
486 for (i = 0; i < 4; i++) {
487 if (devc->channel_mask & (0xff << (i * 8))) {
488 ols_changrp_mask |= (1 << i);
494 * Limit readcount to prevent reading past the end of the hardware
497 samplecount = MIN(devc->max_samples / num_ols_changrp, devc->limit_samples);
498 readcount = samplecount / 4;
500 /* Rather read too many samples than too few. */
501 if (samplecount % 4 != 0)
504 /* Basic triggers. */
505 if (ols_convert_trigger(sdi) != SR_OK) {
506 sr_err("Failed to configure channels.");
509 if (devc->num_stages > 0) {
510 delaycount = readcount * (1 - devc->capture_ratio / 100.0);
511 devc->trigger_at = (readcount - delaycount) * 4 - devc->num_stages;
512 for (i = 0; i <= devc->num_stages; i++) {
513 sr_dbg("Setting OLS stage %d trigger.", i);
514 if ((ret = set_trigger(sdi, i)) != SR_OK)
518 /* No triggers configured, force trigger on first stage. */
519 sr_dbg("Forcing trigger at stage 0.");
520 if ((ret = set_trigger(sdi, 0)) != SR_OK)
522 delaycount = readcount;
526 sr_dbg("Setting samplerate to %" PRIu64 "Hz (divider %u)",
527 devc->cur_samplerate, devc->cur_samplerate_divider);
528 arg[0] = devc->cur_samplerate_divider & 0xff;
529 arg[1] = (devc->cur_samplerate_divider & 0xff00) >> 8;
530 arg[2] = (devc->cur_samplerate_divider & 0xff0000) >> 16;
532 if (send_longcommand(serial, CMD_SET_DIVIDER, arg) != SR_OK)
535 /* Send sample limit and pre/post-trigger capture ratio. */
536 sr_dbg("Setting sample limit %d, trigger point at %d",
537 (readcount - 1) * 4, (delaycount - 1) * 4);
538 arg[0] = ((readcount - 1) & 0xff);
539 arg[1] = ((readcount - 1) & 0xff00) >> 8;
540 arg[2] = ((delaycount - 1) & 0xff);
541 arg[3] = ((delaycount - 1) & 0xff00) >> 8;
542 if (send_longcommand(serial, CMD_CAPTURE_SIZE, arg) != SR_OK)
546 sr_dbg("Setting intpat %s, extpat %s, RLE %s, noise_filter %s, demux %s",
547 devc->flag_reg & FLAG_INTERNAL_TEST_MODE ? "on": "off",
548 devc->flag_reg & FLAG_EXTERNAL_TEST_MODE ? "on": "off",
549 devc->flag_reg & FLAG_RLE ? "on" : "off",
550 devc->flag_reg & FLAG_FILTER ? "on": "off",
551 devc->flag_reg & FLAG_DEMUX ? "on" : "off");
553 * Enable/disable OLS channel groups in the flag register according
554 * to the channel mask. 1 means "disable channel".
556 devc->flag_reg |= ~(ols_changrp_mask << 2) & 0x3c;
557 arg[0] = devc->flag_reg & 0xff;
558 arg[1] = devc->flag_reg >> 8;
559 arg[2] = arg[3] = 0x00;
560 if (send_longcommand(serial, CMD_SET_FLAGS, arg) != SR_OK)
563 /* Start acquisition on the device. */
564 if (send_shortcommand(serial, CMD_RUN) != SR_OK)
567 /* Reset all operational states. */
568 devc->rle_count = devc->num_transfers = 0;
569 devc->num_samples = devc->num_bytes = 0;
570 devc->cnt_bytes = devc->cnt_samples = devc->cnt_samples_rle = 0;
571 memset(devc->sample, 0, 4);
573 /* Send header packet to the session bus. */
574 std_session_send_df_header(cb_data, LOG_PREFIX);
576 /* If the device stops sending for longer than it takes to send a byte,
577 * that means it's finished. But wait at least 100 ms to be safe.
579 serial_source_add(sdi->session, serial, G_IO_IN, 100,
580 ols_receive_data, cb_data);
585 static int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data)
589 abort_acquisition(sdi);
594 SR_PRIV struct sr_dev_driver ols_driver_info = {
596 .longname = "Openbench Logic Sniffer",
601 .dev_list = dev_list,
603 .config_get = config_get,
604 .config_set = config_set,
605 .config_list = config_list,
606 .dev_open = std_serial_dev_open,
607 .dev_close = std_serial_dev_close,
608 .dev_acquisition_start = dev_acquisition_start,
609 .dev_acquisition_stop = dev_acquisition_stop,