2 * This file is part of the libsigrok project.
4 * Copyright (C) 2020 Florian Schmidt <schmidt_florian@gmx.de>
5 * Copyright (C) 2013 Marcus Comstedt <marcus@mc.pp.se>
6 * Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
7 * Copyright (C) 2012 Joel Holdsworth <joel@airwebreathe.org.uk>
9 * This program is free software: you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation, either version 3 of the License, or
12 * (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program. If not, see <http://www.gnu.org/licenses/>.
23 #ifndef LIBSIGROK_HARDWARE_KINGST_LA2016_PROTOCOL_H
24 #define LIBSIGROK_HARDWARE_KINGST_LA2016_PROTOCOL_H
26 #include <libsigrok/libsigrok.h>
29 #define LOG_PREFIX "kingst-la2016"
31 #define LA2016_VID 0x77a1
32 #define LA2016_PID 0x01a2
33 #define LA2016_IPRODUCT_INDEX 2
34 #define USB_INTERFACE 0
35 #define USB_CONFIGURATION 1
36 #define USB_EP_FPGA_BITSTREAM 2
37 #define USB_EP_CAPTURE_DATA 6
40 * On Windows sigrok uses WinUSB RAW_IO policy which requires the
41 * USB transfer buffer size to be a multiple of the endpoint max packet
42 * size, which is 512 bytes in this case. Also, the maximum allowed size
43 * of the transfer buffer is normally read from WinUSB_GetPipePolicy API
44 * but libusb does not expose this function. Typically, max size is 2MB.
46 #define LA2016_EP6_PKTSZ 512 /* Max packet size of USB endpoint 6. */
47 #define LA2016_USB_BUFSZ (256 * 2 * LA2016_EP6_PKTSZ) /* 256KiB buffer. */
49 /* USB communication timeout during regular operation. */
50 #define DEFAULT_TIMEOUT_MS 200
53 * Check for MCU firmware to take effect after upload. Check the device
54 * presence for a maximum period of time, delay between checks in that
55 * phase. Allow for the device to vanish after upload and before checks,
56 * to not mistake its earlier incarnation for the successful operation
57 * of the most recently loaded firmware.
59 #define RENUM_CHECK_PERIOD_MS 3000
60 #define RENUM_GONE_DELAY_MS 1800
61 #define RENUM_POLL_INTERVAL_MS 200
64 * The device expects some zero padding to follow the content of the
65 * file which contains the FPGA bitstream. Specify the chunk size here.
67 #define LA2016_EP2_PADDING 2048
70 * Whether the logic input threshold voltage is a config item of the
71 * "Logic" channel group or a global config item of the device. Ideally
72 * it would be the former (being strictly related to the Logic channels)
73 * but mainline applications work better with the latter, and many other
74 * device drivers implement it that way, too.
76 #define WITH_THRESHOLD_DEVCFG 1
78 #define LA2016_THR_VOLTAGE_MIN 0.40
79 #define LA2016_THR_VOLTAGE_MAX 4.00
81 #define LA2016_NUM_SAMPLES_MAX (UINT64_C(10 * 1000 * 1000 * 1000))
83 /* Maximum device capabilities. May differ between models. */
84 #define MAX_PWM_FREQ SR_MHZ(20)
85 #define PWM_CLOCK SR_MHZ(200) /* 200MHz for both LA2016 and LA1016 */
87 #define LA2016_NUM_PWMCH_MAX 2
89 #define LA2016_CONVBUFFER_SIZE (4 * 1024 * 1024)
92 uint8_t magic; /* EEPROM magic byte value. */
93 const char *name; /* User perceived model name. */
94 const char *fpga_stem; /* Bitstream filename stem. */
95 uint64_t samplerate; /* Max samplerate in Hz. */
96 size_t channel_count; /* Max channel count (16, 32). */
97 uint64_t memory_bits; /* RAM capacity in Gbit (1, 2, 4). */
103 char *fpga_bitstream;
104 uint64_t fw_uploaded; /* Timestamp of most recent FW upload. */
105 uint8_t identify_magic;
106 const struct kingst_model *model;
107 struct sr_channel_group *cg_logic, *cg_pwm;
109 /* User specified parameters. */
114 } pwm_setting[LA2016_NUM_PWMCH_MAX];
115 size_t threshold_voltage_idx;
117 struct sr_sw_limits sw_limits;
118 uint64_t capture_ratio;
120 /* Internal acquisition and download state. */
121 gboolean trigger_involved;
122 gboolean completion_seen;
123 gboolean download_finished;
124 struct capture_info {
125 uint32_t n_rep_packets;
126 uint32_t n_rep_packets_before_trigger;
129 uint32_t n_transfer_packets_to_read; /* each with 5 acq packets */
130 uint32_t n_bytes_to_read;
131 uint32_t n_reps_until_trigger;
132 gboolean trigger_marked;
133 uint64_t total_samples;
136 struct feed_queue_logic *feed_queue;
137 struct libusb_transfer *transfer;
140 SR_PRIV int la2016_upload_firmware(const struct sr_dev_inst *sdi,
141 struct sr_context *sr_ctx, libusb_device *dev, uint16_t product_id);
142 SR_PRIV int la2016_identify_device(const struct sr_dev_inst *sdi,
143 gboolean show_message);
144 SR_PRIV int la2016_init_hardware(const struct sr_dev_inst *sdi);
145 SR_PRIV int la2016_deinit_hardware(const struct sr_dev_inst *sdi);
146 SR_PRIV int la2016_write_pwm_config(const struct sr_dev_inst *sdi, size_t idx);
147 SR_PRIV int la2016_setup_acquisition(const struct sr_dev_inst *sdi,
149 SR_PRIV int la2016_start_acquisition(const struct sr_dev_inst *sdi);
150 SR_PRIV int la2016_abort_acquisition(const struct sr_dev_inst *sdi);
151 SR_PRIV int la2016_receive_data(int fd, int revents, void *cb_data);