2 * This file is part of the libsigrok project.
4 * Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
5 * Copyright (C) 2012 Joel Holdsworth <joel@airwebreathe.org.uk>
7 * This program is free software: you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation, either version 3 of the License, or
10 * (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program. If not, see <http://www.gnu.org/licenses/>.
23 #include <glib/gstdio.h>
34 struct cmd_start_acquisition {
36 uint8_t sample_delay_h;
37 uint8_t sample_delay_l;
42 #define USB_TIMEOUT 100
44 static int command_get_fw_version(libusb_device_handle *devhdl,
45 struct version_info *vi)
49 ret = libusb_control_transfer(devhdl, LIBUSB_REQUEST_TYPE_VENDOR |
50 LIBUSB_ENDPOINT_IN, CMD_GET_FW_VERSION, 0x0000, 0x0000,
51 (unsigned char *)vi, sizeof(struct version_info), USB_TIMEOUT);
54 sr_err("Unable to get version info: %s.",
55 libusb_error_name(ret));
62 static int command_get_revid_version(struct sr_dev_inst *sdi, uint8_t *revid)
64 struct dev_context *devc = sdi->priv;
65 struct sr_usb_dev_inst *usb = sdi->conn;
66 libusb_device_handle *devhdl = usb->devhdl;
69 cmd = devc->dslogic ? DS_CMD_GET_REVID_VERSION : CMD_GET_REVID_VERSION;
70 ret = libusb_control_transfer(devhdl, LIBUSB_REQUEST_TYPE_VENDOR |
71 LIBUSB_ENDPOINT_IN, cmd, 0x0000, 0x0000, revid, 1, USB_TIMEOUT);
74 sr_err("Unable to get REVID: %s.", libusb_error_name(ret));
81 SR_PRIV int fx2lafw_command_start_acquisition(const struct sr_dev_inst *sdi)
83 struct dev_context *devc;
84 struct sr_usb_dev_inst *usb;
86 struct cmd_start_acquisition cmd;
91 samplerate = devc->cur_samplerate;
93 /* Compute the sample rate. */
94 if (devc->sample_wide && samplerate > MAX_16BIT_SAMPLE_RATE) {
95 sr_err("Unable to sample at %" PRIu64 "Hz "
96 "when collecting 16-bit samples.", samplerate);
101 cmd.flags = cmd.sample_delay_h = cmd.sample_delay_l = 0;
102 if ((SR_MHZ(48) % samplerate) == 0) {
103 cmd.flags = CMD_START_FLAGS_CLK_48MHZ;
104 delay = SR_MHZ(48) / samplerate - 1;
105 if (delay > MAX_SAMPLE_DELAY)
109 if (delay == 0 && (SR_MHZ(30) % samplerate) == 0) {
110 cmd.flags = CMD_START_FLAGS_CLK_30MHZ;
111 delay = SR_MHZ(30) / samplerate - 1;
114 sr_dbg("GPIF delay = %d, clocksource = %sMHz.", delay,
115 (cmd.flags & CMD_START_FLAGS_CLK_48MHZ) ? "48" : "30");
117 if (delay <= 0 || delay > MAX_SAMPLE_DELAY) {
118 sr_err("Unable to sample at %" PRIu64 "Hz.", samplerate);
122 cmd.sample_delay_h = (delay >> 8) & 0xff;
123 cmd.sample_delay_l = delay & 0xff;
125 /* Select the sampling width. */
126 cmd.flags |= devc->sample_wide ? CMD_START_FLAGS_SAMPLE_16BIT :
127 CMD_START_FLAGS_SAMPLE_8BIT;
129 /* Send the control message. */
130 ret = libusb_control_transfer(usb->devhdl, LIBUSB_REQUEST_TYPE_VENDOR |
131 LIBUSB_ENDPOINT_OUT, CMD_START, 0x0000, 0x0000,
132 (unsigned char *)&cmd, sizeof(cmd), USB_TIMEOUT);
134 sr_err("Unable to send start command: %s.",
135 libusb_error_name(ret));
143 * Check the USB configuration to determine if this is an fx2lafw device.
145 * @return TRUE if the device's configuration profile matches fx2lafw
146 * configuration, FALSE otherwise.
148 SR_PRIV gboolean match_manuf_prod(libusb_device *dev, const char *manufacturer,
151 struct libusb_device_descriptor des;
152 struct libusb_device_handle *hdl;
154 unsigned char strdesc[64];
159 /* Assume the FW has not been loaded, unless proven wrong. */
160 libusb_get_device_descriptor(dev, &des);
162 if (libusb_open(dev, &hdl) != 0)
165 if (libusb_get_string_descriptor_ascii(hdl,
166 des.iManufacturer, strdesc, sizeof(strdesc)) < 0)
168 if (strcmp((const char *)strdesc, manufacturer))
171 if (libusb_get_string_descriptor_ascii(hdl,
172 des.iProduct, strdesc, sizeof(strdesc)) < 0)
174 if (strcmp((const char *)strdesc, product))
185 SR_PRIV int fx2lafw_dev_open(struct sr_dev_inst *sdi, struct sr_dev_driver *di)
187 libusb_device **devlist;
188 struct sr_usb_dev_inst *usb;
189 struct libusb_device_descriptor des;
190 struct dev_context *devc;
191 struct drv_context *drvc;
192 struct version_info vi;
193 int ret, i, device_count;
195 char connection_id[64];
201 if (sdi->status == SR_ST_ACTIVE)
202 /* Device is already in use. */
205 device_count = libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist);
206 if (device_count < 0) {
207 sr_err("Failed to get device list: %s.",
208 libusb_error_name(device_count));
212 for (i = 0; i < device_count; i++) {
213 libusb_get_device_descriptor(devlist[i], &des);
215 if (des.idVendor != devc->profile->vid
216 || des.idProduct != devc->profile->pid)
219 if ((sdi->status == SR_ST_INITIALIZING) ||
220 (sdi->status == SR_ST_INACTIVE)) {
222 * Check device by its physical USB bus/port address.
224 usb_get_port_path(devlist[i], connection_id, sizeof(connection_id));
225 if (strcmp(sdi->connection_id, connection_id))
226 /* This is not the one. */
230 if (!(ret = libusb_open(devlist[i], &usb->devhdl))) {
231 if (usb->address == 0xff)
233 * First time we touch this device after FW
234 * upload, so we don't know the address yet.
236 usb->address = libusb_get_device_address(devlist[i]);
238 sr_err("Failed to open device: %s.",
239 libusb_error_name(ret));
243 if (libusb_has_capability(LIBUSB_CAP_SUPPORTS_DETACH_KERNEL_DRIVER)) {
244 if (libusb_kernel_driver_active(usb->devhdl, USB_INTERFACE) == 1) {
245 if ((ret = libusb_detach_kernel_driver(usb->devhdl, USB_INTERFACE)) < 0) {
246 sr_err("Failed to detach kernel driver: %s.",
247 libusb_error_name(ret));
253 ret = command_get_fw_version(usb->devhdl, &vi);
255 sr_err("Failed to get firmware version.");
259 ret = command_get_revid_version(sdi, &revid);
261 sr_err("Failed to get REVID.");
266 * Changes in major version mean incompatible/API changes, so
267 * bail out if we encounter an incompatible version.
268 * Different minor versions are OK, they should be compatible.
270 if (vi.major != FX2LAFW_REQUIRED_VERSION_MAJOR) {
271 sr_err("Expected firmware version %d.x, "
272 "got %d.%d.", FX2LAFW_REQUIRED_VERSION_MAJOR,
277 sdi->status = SR_ST_ACTIVE;
278 sr_info("Opened device on %d.%d (logical) / %s (physical), "
279 "interface %d, firmware %d.%d.",
280 usb->bus, usb->address, connection_id,
281 USB_INTERFACE, vi.major, vi.minor);
283 sr_info("Detected REVID=%d, it's a Cypress CY7C68013%s.",
284 revid, (revid != 1) ? " (FX2)" : "A (FX2LP)");
288 libusb_free_device_list(devlist, 1);
290 if (sdi->status != SR_ST_ACTIVE)
296 SR_PRIV struct dev_context *fx2lafw_dev_new(void)
298 struct dev_context *devc;
300 devc = g_malloc0(sizeof(struct dev_context));
301 devc->profile = NULL;
302 devc->fw_updated = 0;
303 devc->cur_samplerate = 0;
304 devc->limit_samples = 0;
305 devc->capture_ratio = 0;
306 devc->sample_wide = FALSE;
312 SR_PRIV void fx2lafw_abort_acquisition(struct dev_context *devc)
316 devc->acq_aborted = TRUE;
318 for (i = devc->num_transfers - 1; i >= 0; i--) {
319 if (devc->transfers[i])
320 libusb_cancel_transfer(devc->transfers[i]);
324 static void finish_acquisition(struct sr_dev_inst *sdi)
326 struct sr_datafeed_packet packet;
327 struct dev_context *devc;
331 /* Terminate session. */
332 packet.type = SR_DF_END;
333 sr_session_send(sdi, &packet);
335 /* Remove fds from polling. */
336 usb_source_remove(sdi->session, devc->ctx);
338 devc->num_transfers = 0;
339 g_free(devc->transfers);
342 soft_trigger_logic_free(devc->stl);
347 static void free_transfer(struct libusb_transfer *transfer)
349 struct sr_dev_inst *sdi;
350 struct dev_context *devc;
353 sdi = transfer->user_data;
356 g_free(transfer->buffer);
357 transfer->buffer = NULL;
358 libusb_free_transfer(transfer);
360 for (i = 0; i < devc->num_transfers; i++) {
361 if (devc->transfers[i] == transfer) {
362 devc->transfers[i] = NULL;
367 devc->submitted_transfers--;
368 if (devc->submitted_transfers == 0)
369 finish_acquisition(sdi);
372 static void resubmit_transfer(struct libusb_transfer *transfer)
376 if ((ret = libusb_submit_transfer(transfer)) == LIBUSB_SUCCESS)
379 sr_err("%s: %s", __func__, libusb_error_name(ret));
380 free_transfer(transfer);
384 SR_PRIV void LIBUSB_CALL fx2lafw_receive_transfer(struct libusb_transfer *transfer)
386 struct sr_dev_inst *sdi;
387 struct dev_context *devc;
388 gboolean packet_has_error = FALSE;
389 struct sr_datafeed_packet packet;
390 struct sr_datafeed_logic logic;
391 unsigned int num_samples;
392 int trigger_offset, cur_sample_count, unitsize;
393 int pre_trigger_samples;
395 sdi = transfer->user_data;
399 * If acquisition has already ended, just free any queued up
400 * transfer that come in.
402 if (devc->acq_aborted) {
403 free_transfer(transfer);
407 sr_dbg("receive_transfer(): status %s received %d bytes.",
408 libusb_error_name(transfer->status), transfer->actual_length);
410 /* Save incoming transfer before reusing the transfer struct. */
411 unitsize = devc->sample_wide ? 2 : 1;
412 cur_sample_count = transfer->actual_length / unitsize;
414 switch (transfer->status) {
415 case LIBUSB_TRANSFER_NO_DEVICE:
416 fx2lafw_abort_acquisition(devc);
417 free_transfer(transfer);
419 case LIBUSB_TRANSFER_COMPLETED:
420 case LIBUSB_TRANSFER_TIMED_OUT: /* We may have received some data though. */
423 packet_has_error = TRUE;
427 if (transfer->actual_length == 0 || packet_has_error) {
428 devc->empty_transfer_count++;
429 if (devc->empty_transfer_count > MAX_EMPTY_TRANSFERS) {
431 * The FX2 gave up. End the acquisition, the frontend
432 * will work out that the samplecount is short.
434 fx2lafw_abort_acquisition(devc);
435 free_transfer(transfer);
437 resubmit_transfer(transfer);
441 devc->empty_transfer_count = 0;
444 if (devc->trigger_fired) {
445 if (!devc->limit_samples || devc->sent_samples < devc->limit_samples) {
446 /* Send the incoming transfer to the session bus. */
447 packet.type = SR_DF_LOGIC;
448 packet.payload = &logic;
449 if (devc->limit_samples && devc->sent_samples + cur_sample_count > devc->limit_samples)
450 num_samples = devc->limit_samples - devc->sent_samples;
452 num_samples = cur_sample_count;
453 logic.length = num_samples * unitsize;
454 logic.unitsize = unitsize;
455 logic.data = transfer->buffer;
456 sr_session_send(devc->cb_data, &packet);
457 devc->sent_samples += num_samples;
460 trigger_offset = soft_trigger_logic_check(devc->stl,
461 transfer->buffer, transfer->actual_length, &pre_trigger_samples);
462 if (trigger_offset > -1) {
463 devc->sent_samples += pre_trigger_samples;
464 packet.type = SR_DF_LOGIC;
465 packet.payload = &logic;
466 num_samples = cur_sample_count - trigger_offset;
467 if (devc->limit_samples &&
468 num_samples > devc->limit_samples - devc->sent_samples)
469 num_samples = devc->limit_samples - devc->sent_samples;
470 logic.length = num_samples * unitsize;
471 logic.unitsize = unitsize;
472 logic.data = transfer->buffer + trigger_offset * unitsize;
473 sr_session_send(devc->cb_data, &packet);
474 devc->sent_samples += num_samples;
476 devc->trigger_fired = TRUE;
480 if (devc->limit_samples && devc->sent_samples >= devc->limit_samples) {
481 fx2lafw_abort_acquisition(devc);
482 free_transfer(transfer);
484 resubmit_transfer(transfer);
487 static unsigned int to_bytes_per_ms(unsigned int samplerate)
489 return samplerate / 1000;
492 SR_PRIV size_t fx2lafw_get_buffer_size(struct dev_context *devc)
497 * The buffer should be large enough to hold 10ms of data and
500 s = 10 * to_bytes_per_ms(devc->cur_samplerate);
501 return (s + 511) & ~511;
504 SR_PRIV unsigned int fx2lafw_get_number_of_transfers(struct dev_context *devc)
508 /* Total buffer size should be able to hold about 500ms of data. */
509 n = (500 * to_bytes_per_ms(devc->cur_samplerate) /
510 fx2lafw_get_buffer_size(devc));
512 if (n > NUM_SIMUL_TRANSFERS)
513 return NUM_SIMUL_TRANSFERS;
518 SR_PRIV unsigned int fx2lafw_get_timeout(struct dev_context *devc)
521 unsigned int timeout;
523 total_size = fx2lafw_get_buffer_size(devc) *
524 fx2lafw_get_number_of_transfers(devc);
525 timeout = total_size / to_bytes_per_ms(devc->cur_samplerate);
526 return timeout + timeout / 4; /* Leave a headroom of 25% percent. */