2 * This file is part of the libsigrok project.
4 * Copyright (C) 2012 Bert Vermeulen <bert@biot.com>
6 * This program is free software: you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation, either version 3 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program. If not, see <http://www.gnu.org/licenses/>.
21 #include <sys/types.h>
26 #include "libsigrok.h"
27 #include "libsigrok-internal.h"
28 #include "fluke-dmm.h"
30 static const uint32_t scanopts[] = {
35 static const uint32_t devopts[] = {
38 SR_CONF_LIMIT_SAMPLES | SR_CONF_SET,
39 SR_CONF_LIMIT_MSEC | SR_CONF_SET,
42 SR_PRIV struct sr_dev_driver flukedmm_driver_info;
43 static struct sr_dev_driver *di = &flukedmm_driver_info;
45 static char *scan_conn[] = {
50 /* Scopemeter 190 series */
55 static const struct flukedmm_profile supported_flukedmm[] = {
56 { FLUKE_187, "187", 100, 1000 },
57 { FLUKE_189, "189", 100, 1000 },
58 { FLUKE_287, "287", 100, 1000 },
59 { FLUKE_190, "199B", 1000, 3500 },
62 static int init(struct sr_context *sr_ctx)
64 return std_init(sr_ctx, di, LOG_PREFIX);
67 static GSList *fluke_scan(const char *conn, const char *serialcomm)
69 struct sr_dev_inst *sdi;
70 struct drv_context *drvc;
71 struct dev_context *devc;
72 struct sr_channel *ch;
73 struct sr_serial_dev_inst *serial;
76 char buf[128], *b, **tokens;
78 if (!(serial = sr_serial_dev_inst_new(conn, serialcomm)))
81 if (serial_open(serial, SERIAL_RDWR) != SR_OK)
88 /* We'll try the discovery sequence three times in case the device
89 * is not in an idle state when we send ID. */
90 while (!devices && retry < 3) {
93 if (serial_write_blocking(serial, "ID\r", 3, SERIAL_WRITE_TIMEOUT_MS) < 0) {
94 sr_err("Unable to send ID string");
98 /* Response is first a CMD_ACK byte (ASCII '0' for OK,
99 * or '1' to signify an error. */
101 serial_readline(serial, &b, &len, 150);
107 /* If CMD_ACK was OK, ID string follows. */
109 serial_readline(serial, &b, &len, 850);
112 if (strcspn(buf, ",") < 15)
113 /* Looks like it's comma-separated. */
114 tokens = g_strsplit(buf, ",", 3);
116 /* Fluke 199B, at least, uses semicolon. */
117 tokens = g_strsplit(buf, ";", 3);
118 if (!strncmp("FLUKE", tokens[0], 5)
119 && tokens[1] && tokens[2]) {
120 for (i = 0; supported_flukedmm[i].model; i++) {
121 if (strcmp(supported_flukedmm[i].modelname, tokens[0] + 6))
123 /* Skip leading spaces in version number. */
124 for (s = 0; tokens[1][s] == ' '; s++);
125 sdi = g_malloc0(sizeof(struct sr_dev_inst));
126 sdi->status = SR_ST_INACTIVE;
127 sdi->vendor = g_strdup("Fluke");
128 sdi->model = g_strdup(tokens[0] + 6);
129 sdi->version = g_strdup(tokens[1] + s);
130 devc = g_malloc0(sizeof(struct dev_context));
131 devc->profile = &supported_flukedmm[i];
132 sdi->inst_type = SR_INST_SERIAL;
136 if (!(ch = sr_channel_new(0, SR_CHANNEL_ANALOG, TRUE, "P1")))
138 sdi->channels = g_slist_append(sdi->channels, ch);
139 drvc->instances = g_slist_append(drvc->instances, sdi);
140 devices = g_slist_append(devices, sdi);
149 serial_close(serial);
151 sr_serial_dev_inst_free(serial);
156 static GSList *scan(GSList *options)
158 struct sr_config *src;
161 const char *conn, *serialcomm;
163 conn = serialcomm = NULL;
164 for (l = options; l; l = l->next) {
168 conn = g_variant_get_string(src->data, NULL);
170 case SR_CONF_SERIALCOMM:
171 serialcomm = g_variant_get_string(src->data, NULL);
180 /* Use the provided comm specs. */
181 devices = fluke_scan(conn, serialcomm);
183 for (i = 0; scan_conn[i]; i++) {
184 if ((devices = fluke_scan(conn, scan_conn[i])))
186 /* The Scopemeter 199B, at least, requires this
187 * after all the 115k/9.6k confusion. */
195 static GSList *dev_list(void)
197 return ((struct drv_context *)(di->priv))->instances;
200 static int cleanup(void)
202 return std_dev_clear(di, NULL);
205 static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sdi,
206 const struct sr_channel_group *cg)
208 struct dev_context *devc;
212 if (sdi->status != SR_ST_ACTIVE)
213 return SR_ERR_DEV_CLOSED;
215 if (!(devc = sdi->priv)) {
216 sr_err("sdi->priv was NULL.");
221 case SR_CONF_LIMIT_MSEC:
222 /* TODO: not yet implemented */
223 if (g_variant_get_uint64(data) == 0) {
224 sr_err("LIMIT_MSEC can't be 0.");
227 devc->limit_msec = g_variant_get_uint64(data);
228 sr_dbg("Setting time limit to %" PRIu64 "ms.",
231 case SR_CONF_LIMIT_SAMPLES:
232 devc->limit_samples = g_variant_get_uint64(data);
233 sr_dbg("Setting sample limit to %" PRIu64 ".",
234 devc->limit_samples);
243 static int config_list(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi,
244 const struct sr_channel_group *cg)
250 case SR_CONF_SCAN_OPTIONS:
251 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
252 scanopts, ARRAY_SIZE(scanopts), sizeof(uint32_t));
254 case SR_CONF_DEVICE_OPTIONS:
255 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
256 devopts, ARRAY_SIZE(devopts), sizeof(uint32_t));
265 static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data)
267 struct dev_context *devc;
268 struct sr_serial_dev_inst *serial;
270 if (sdi->status != SR_ST_ACTIVE)
271 return SR_ERR_DEV_CLOSED;
273 if (!(devc = sdi->priv)) {
274 sr_err("sdi->priv was NULL.");
278 devc->cb_data = cb_data;
280 /* Send header packet to the session bus. */
281 std_session_send_df_header(cb_data, LOG_PREFIX);
283 /* Poll every 100ms, or whenever some data comes in. */
285 serial_source_add(sdi->session, serial, G_IO_IN, 50,
286 fluke_receive_data, (void *)sdi);
288 if (serial_write_blocking(serial, "QM\r", 3, SERIAL_WRITE_TIMEOUT_MS) < 0) {
289 sr_err("Unable to send QM.");
292 devc->cmd_sent_at = g_get_monotonic_time() / 1000;
293 devc->expect_response = TRUE;
298 static int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data)
300 return std_serial_dev_acquisition_stop(sdi, cb_data, std_serial_dev_close,
301 sdi->conn, LOG_PREFIX);
304 SR_PRIV struct sr_dev_driver flukedmm_driver_info = {
306 .longname = "Fluke 18x/28x series DMMs",
311 .dev_list = dev_list,
314 .config_set = config_set,
315 .config_list = config_list,
316 .dev_open = std_serial_dev_open,
317 .dev_close = std_serial_dev_close,
318 .dev_acquisition_start = dev_acquisition_start,
319 .dev_acquisition_stop = dev_acquisition_stop,