2 * This file is part of the libsigrok project.
4 * Copyright (C) 2011-2014 Uwe Hermann <uwe@hermann-uwe.de>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
21 #ifndef LIBSIGROK_HARDWARE_CHRONOVU_LA_PROTOCOL_H
22 #define LIBSIGROK_HARDWARE_CHRONOVU_LA_PROTOCOL_H
29 #include <libsigrok/libsigrok.h>
30 #include "libsigrok-internal.h"
32 #define LOG_PREFIX "la8/la16"
34 #define SDRAM_SIZE (8 * 1024 * 1024)
35 #define MAX_NUM_SAMPLES SDRAM_SIZE
37 #define BS 4096 /* Block size */
38 #define NUM_BLOCKS 2048 /* Number of blocks */
47 const char *modelname;
48 const char *iproduct; /* USB iProduct string */
49 unsigned int num_channels;
50 uint64_t max_samplerate;
51 const int num_trigger_matches;
52 float trigger_constant;
55 /* Private, per-device-instance driver context. */
57 /** Device profile struct for this device. */
58 const struct cv_profile *prof;
60 /** FTDI device context (used by libftdi). */
61 struct ftdi_context *ftdic;
63 /** The currently configured samplerate of the device. */
64 uint64_t cur_samplerate;
66 /** The current sampling limit (in ms). */
69 /** The current sampling limit (in number of samples). */
70 uint64_t limit_samples;
75 * A buffer containing some (mangled) samples from the device.
76 * Format: Pretty mangled-up (due to hardware reasons), see code.
78 uint8_t mangled_buf[BS];
81 * An 8MB buffer where we'll store the de-mangled samples.
82 * LA8: Each sample is 1 byte, MSB is channel 7, LSB is channel 0.
83 * LA16: Each sample is 2 bytes, MSB is channel 15, LSB is channel 0.
89 * A 1 bit matches a high signal, 0 matches a low signal on a channel.
91 * If the resp. 'trigger_edgemask' bit is set, 1 means "rising edge",
92 * and 0 means "falling edge".
94 uint16_t trigger_pattern;
98 * A 1 bit means "must match trigger_pattern", 0 means "don't care".
100 uint16_t trigger_mask;
104 * A 1 bit means "edge triggered", 0 means "state triggered".
106 * Edge triggering is only supported on LA16 (but not LA8).
108 uint16_t trigger_edgemask;
110 /** Tells us whether an SR_DF_TRIGGER packet was already sent. */
113 /** Used for keeping track how much time has passed. */
116 /** Counter/index for the data block to be read. */
119 /** The divcount value (determines the sample period). */
122 /** This ChronoVu device's USB VID/PID. */
126 /** Samplerates supported by this device. */
127 uint64_t samplerates[255];
131 extern SR_PRIV const char *cv_channel_names[];
132 extern const struct cv_profile cv_profiles[];
133 SR_PRIV void cv_fill_samplerates_if_needed(const struct sr_dev_inst *sdi);
134 SR_PRIV uint8_t cv_samplerate_to_divcount(const struct sr_dev_inst *sdi,
135 uint64_t samplerate);
136 SR_PRIV int cv_write(struct dev_context *devc, uint8_t *buf, int size);
137 SR_PRIV int cv_convert_trigger(const struct sr_dev_inst *sdi);
138 SR_PRIV int cv_set_samplerate(const struct sr_dev_inst *sdi, uint64_t samplerate);
139 SR_PRIV int cv_read_block(struct dev_context *devc);
140 SR_PRIV void cv_send_block_to_session_bus(struct dev_context *devc, int block);