2 * This file is part of the libsigrok project.
4 * Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
6 * This program is free software: you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation, either version 3 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program. If not, see <http://www.gnu.org/licenses/>.
23 #include <sys/types.h>
27 #include <libsigrok/libsigrok.h>
28 #include "libsigrok-internal.h"
31 #define LOG_PREFIX "hwdriver"
37 * Hardware driver handling in libsigrok.
41 * @defgroup grp_driver Hardware drivers
43 * Hardware driver handling in libsigrok.
48 /* Please use the same order/grouping as in enum sr_configkey (libsigrok.h). */
49 static struct sr_key_info sr_key_info_config[] = {
51 {SR_CONF_LOGIC_ANALYZER, SR_T_STRING, NULL, "Logic analyzer", NULL},
52 {SR_CONF_OSCILLOSCOPE, SR_T_STRING, NULL, "Oscilloscope", NULL},
53 {SR_CONF_MULTIMETER, SR_T_STRING, NULL, "Multimeter", NULL},
54 {SR_CONF_DEMO_DEV, SR_T_STRING, NULL, "Demo device", NULL},
55 {SR_CONF_SOUNDLEVELMETER, SR_T_STRING, NULL, "Sound level meter", NULL},
56 {SR_CONF_THERMOMETER, SR_T_STRING, NULL, "Thermometer", NULL},
57 {SR_CONF_HYGROMETER, SR_T_STRING, NULL, "Hygrometer", NULL},
58 {SR_CONF_ENERGYMETER, SR_T_STRING, NULL, "Energy meter", NULL},
59 {SR_CONF_DEMODULATOR, SR_T_STRING, NULL, "Demodulator", NULL},
60 {SR_CONF_POWER_SUPPLY, SR_T_STRING, NULL, "Power supply", NULL},
61 {SR_CONF_LCRMETER, SR_T_STRING, NULL, "LCR meter", NULL},
62 {SR_CONF_ELECTRONIC_LOAD, SR_T_STRING, NULL, "Electronic load", NULL},
63 {SR_CONF_SCALE, SR_T_STRING, NULL, "Scale", NULL},
64 {SR_CONF_SIGNAL_GENERATOR, SR_T_STRING, NULL, "Signal generator", NULL},
65 {SR_CONF_POWERMETER, SR_T_STRING, NULL, "Power meter", NULL},
67 /* Driver scan options */
68 {SR_CONF_CONN, SR_T_STRING, "conn",
70 {SR_CONF_SERIALCOMM, SR_T_STRING, "serialcomm",
71 "Serial communication", NULL},
72 {SR_CONF_MODBUSADDR, SR_T_UINT64, "modbusaddr",
73 "Modbus slave address", NULL},
75 /* Device (or channel group) configuration */
76 {SR_CONF_SAMPLERATE, SR_T_UINT64, "samplerate",
78 {SR_CONF_CAPTURE_RATIO, SR_T_UINT64, "captureratio",
79 "Pre-trigger capture ratio", NULL},
80 {SR_CONF_PATTERN_MODE, SR_T_STRING, "pattern",
82 {SR_CONF_RLE, SR_T_BOOL, "rle",
83 "Run length encoding", NULL},
84 {SR_CONF_TRIGGER_SLOPE, SR_T_STRING, "triggerslope",
85 "Trigger slope", NULL},
86 {SR_CONF_AVERAGING, SR_T_BOOL, "averaging",
88 {SR_CONF_AVG_SAMPLES, SR_T_UINT64, "avg_samples",
89 "Number of samples to average over", NULL},
90 {SR_CONF_TRIGGER_SOURCE, SR_T_STRING, "triggersource",
91 "Trigger source", NULL},
92 {SR_CONF_HORIZ_TRIGGERPOS, SR_T_FLOAT, "horiz_triggerpos",
93 "Horizontal trigger position", NULL},
94 {SR_CONF_BUFFERSIZE, SR_T_UINT64, "buffersize",
96 {SR_CONF_TIMEBASE, SR_T_RATIONAL_PERIOD, "timebase",
98 {SR_CONF_FILTER, SR_T_BOOL, "filter",
100 {SR_CONF_VDIV, SR_T_RATIONAL_VOLT, "vdiv",
102 {SR_CONF_COUPLING, SR_T_STRING, "coupling",
104 {SR_CONF_TRIGGER_MATCH, SR_T_INT32, "triggermatch",
105 "Trigger matches", NULL},
106 {SR_CONF_SAMPLE_INTERVAL, SR_T_UINT64, "sample_interval",
107 "Sample interval", NULL},
108 {SR_CONF_NUM_HDIV, SR_T_INT32, "num_hdiv",
109 "Number of horizontal divisions", NULL},
110 {SR_CONF_NUM_VDIV, SR_T_INT32, "num_vdiv",
111 "Number of vertical divisions", NULL},
112 {SR_CONF_SPL_WEIGHT_FREQ, SR_T_STRING, "spl_weight_freq",
113 "Sound pressure level frequency weighting", NULL},
114 {SR_CONF_SPL_WEIGHT_TIME, SR_T_STRING, "spl_weight_time",
115 "Sound pressure level time weighting", NULL},
116 {SR_CONF_SPL_MEASUREMENT_RANGE, SR_T_UINT64_RANGE, "spl_meas_range",
117 "Sound pressure level measurement range", NULL},
118 {SR_CONF_HOLD_MAX, SR_T_BOOL, "hold_max",
120 {SR_CONF_HOLD_MIN, SR_T_BOOL, "hold_min",
122 {SR_CONF_VOLTAGE_THRESHOLD, SR_T_DOUBLE_RANGE, "voltage_threshold",
123 "Voltage threshold", NULL },
124 {SR_CONF_EXTERNAL_CLOCK, SR_T_BOOL, "external_clock",
125 "External clock mode", NULL},
126 {SR_CONF_SWAP, SR_T_BOOL, "swap",
127 "Swap channel order", NULL},
128 {SR_CONF_CENTER_FREQUENCY, SR_T_UINT64, "center_frequency",
129 "Center frequency", NULL},
130 {SR_CONF_NUM_LOGIC_CHANNELS, SR_T_INT32, "logic_channels",
131 "Number of logic channels", NULL},
132 {SR_CONF_NUM_ANALOG_CHANNELS, SR_T_INT32, "analog_channels",
133 "Number of analog channels", NULL},
134 {SR_CONF_VOLTAGE, SR_T_FLOAT, "voltage",
135 "Current voltage", NULL},
136 {SR_CONF_VOLTAGE_TARGET, SR_T_FLOAT, "voltage_target",
137 "Voltage target", NULL},
138 {SR_CONF_CURRENT, SR_T_FLOAT, "current",
139 "Current current", NULL},
140 {SR_CONF_CURRENT_LIMIT, SR_T_FLOAT, "current_limit",
141 "Current limit", NULL},
142 {SR_CONF_ENABLED, SR_T_BOOL, "enabled",
143 "Channel enabled", NULL},
144 {SR_CONF_CHANNEL_CONFIG, SR_T_STRING, "channel_config",
145 "Channel modes", NULL},
146 {SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED, SR_T_BOOL, "ovp_enabled",
147 "Over-voltage protection enabled", NULL},
148 {SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE, SR_T_BOOL, "ovp_active",
149 "Over-voltage protection active", NULL},
150 {SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD, SR_T_FLOAT, "ovp_threshold",
151 "Over-voltage protection threshold", NULL},
152 {SR_CONF_OVER_CURRENT_PROTECTION_ENABLED, SR_T_BOOL, "ocp_enabled",
153 "Over-current protection enabled", NULL},
154 {SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE, SR_T_BOOL, "ocp_active",
155 "Over-current protection active", NULL},
156 {SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD, SR_T_FLOAT, "ocp_threshold",
157 "Over-current protection threshold", NULL},
158 {SR_CONF_CLOCK_EDGE, SR_T_STRING, "clock_edge",
160 {SR_CONF_AMPLITUDE, SR_T_FLOAT, "amplitude",
162 {SR_CONF_REGULATION, SR_T_STRING, "regulation",
163 "Channel regulation", NULL},
164 {SR_CONF_OVER_TEMPERATURE_PROTECTION, SR_T_BOOL, "otp",
165 "Over-temperature protection", NULL},
166 {SR_CONF_OUTPUT_FREQUENCY, SR_T_FLOAT, "output_frequency",
167 "Output frequency", NULL},
168 {SR_CONF_OUTPUT_FREQUENCY_TARGET, SR_T_FLOAT, "output_frequency_target",
169 "Output frequency target", NULL},
170 {SR_CONF_MEASURED_QUANTITY, SR_T_MQ, "measured_quantity",
171 "Measured quantity", NULL},
172 {SR_CONF_EQUIV_CIRCUIT_MODEL, SR_T_STRING, "equiv_circuit_model",
173 "Equivalent circuit model", NULL},
174 {SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE, SR_T_BOOL, "otp_active",
175 "Over-temperature protection active", NULL},
176 {SR_CONF_UNDER_VOLTAGE_CONDITION, SR_T_BOOL, "uvc",
177 "Under-voltage condition", NULL},
178 {SR_CONF_UNDER_VOLTAGE_CONDITION_ACTIVE, SR_T_BOOL, "uvc_active",
179 "Under-voltage condition active", NULL},
180 {SR_CONF_UNDER_VOLTAGE_CONDITION_THRESHOLD, SR_T_FLOAT, "uvc_threshold",
181 "Under-voltage condition threshold", NULL},
182 {SR_CONF_TRIGGER_LEVEL, SR_T_FLOAT, "triggerlevel",
183 "Trigger level", NULL},
184 {SR_CONF_EXTERNAL_CLOCK_SOURCE, SR_T_STRING, "external_clock_source",
185 "External clock source", NULL},
186 {SR_CONF_OFFSET, SR_T_FLOAT, "offset",
190 {SR_CONF_SESSIONFILE, SR_T_STRING, "sessionfile",
191 "Session file", NULL},
192 {SR_CONF_CAPTUREFILE, SR_T_STRING, "capturefile",
193 "Capture file", NULL},
194 {SR_CONF_CAPTURE_UNITSIZE, SR_T_UINT64, "capture_unitsize",
195 "Capture unitsize", NULL},
196 {SR_CONF_POWER_OFF, SR_T_BOOL, "power_off",
198 {SR_CONF_DATA_SOURCE, SR_T_STRING, "data_source",
199 "Data source", NULL},
200 {SR_CONF_PROBE_FACTOR, SR_T_UINT64, "probe_factor",
201 "Probe factor", NULL},
202 {SR_CONF_ADC_POWERLINE_CYCLES, SR_T_FLOAT, "nplc",
203 "Number of ADC powerline cycles", NULL},
205 /* Acquisition modes, sample limiting */
206 {SR_CONF_LIMIT_MSEC, SR_T_UINT64, "limit_time",
208 {SR_CONF_LIMIT_SAMPLES, SR_T_UINT64, "limit_samples",
209 "Sample limit", NULL},
210 {SR_CONF_LIMIT_FRAMES, SR_T_UINT64, "limit_frames",
211 "Frame limit", NULL},
212 {SR_CONF_CONTINUOUS, SR_T_BOOL, "continuous",
213 "Continuous sampling", NULL},
214 {SR_CONF_DATALOG, SR_T_BOOL, "datalog",
216 {SR_CONF_DEVICE_MODE, SR_T_STRING, "device_mode",
217 "Device mode", NULL},
218 {SR_CONF_TEST_MODE, SR_T_STRING, "test_mode",
224 /* Please use the same order as in enum sr_mq (libsigrok.h). */
225 static struct sr_key_info sr_key_info_mq[] = {
226 {SR_MQ_VOLTAGE, 0, "voltage", "Voltage", NULL},
227 {SR_MQ_CURRENT, 0, "current", "Current", NULL},
228 {SR_MQ_RESISTANCE, 0, "resistance", "Resistance", NULL},
229 {SR_MQ_CAPACITANCE, 0, "capacitance", "Capacitance", NULL},
230 {SR_MQ_TEMPERATURE, 0, "temperature", "Temperature", NULL},
231 {SR_MQ_FREQUENCY, 0, "frequency", "Frequency", NULL},
232 {SR_MQ_DUTY_CYCLE, 0, "duty_cycle", "Duty cycle", NULL},
233 {SR_MQ_CONTINUITY, 0, "continuity", "Continuity", NULL},
234 {SR_MQ_PULSE_WIDTH, 0, "pulse_width", "Pulse width", NULL},
235 {SR_MQ_CONDUCTANCE, 0, "conductance", "Conductance", NULL},
236 {SR_MQ_POWER, 0, "power", "Power", NULL},
237 {SR_MQ_GAIN, 0, "gain", "Gain", NULL},
238 {SR_MQ_SOUND_PRESSURE_LEVEL, 0, "spl", "Sound pressure level", NULL},
239 {SR_MQ_CARBON_MONOXIDE, 0, "co", "Carbon monoxide", NULL},
240 {SR_MQ_RELATIVE_HUMIDITY, 0, "rh", "Relative humidity", NULL},
241 {SR_MQ_TIME, 0, "time", "Time", NULL},
242 {SR_MQ_WIND_SPEED, 0, "wind_speed", "Wind speed", NULL},
243 {SR_MQ_PRESSURE, 0, "pressure", "Pressure", NULL},
244 {SR_MQ_PARALLEL_INDUCTANCE, 0, "parallel_inductance", "Parallel inductance", NULL},
245 {SR_MQ_PARALLEL_CAPACITANCE, 0, "parallel_capacitance", "Parallel capacitance", NULL},
246 {SR_MQ_PARALLEL_RESISTANCE, 0, "parallel_resistance", "Parallel resistance", NULL},
247 {SR_MQ_SERIES_INDUCTANCE, 0, "series_inductance", "Series inductance", NULL},
248 {SR_MQ_SERIES_CAPACITANCE, 0, "series_capacitance", "Series capacitance", NULL},
249 {SR_MQ_SERIES_RESISTANCE, 0, "series_resistance", "Series resistance", NULL},
250 {SR_MQ_DISSIPATION_FACTOR, 0, "dissipation_factor", "Dissipation factor", NULL},
251 {SR_MQ_QUALITY_FACTOR, 0, "quality_factor", "Quality factor", NULL},
252 {SR_MQ_PHASE_ANGLE, 0, "phase_angle", "Phase angle", NULL},
253 {SR_MQ_DIFFERENCE, 0, "difference", "Difference", NULL},
254 {SR_MQ_COUNT, 0, "count", "Count", NULL},
255 {SR_MQ_POWER_FACTOR, 0, "power_factor", "Power factor", NULL},
256 {SR_MQ_APPARENT_POWER, 0, "apparent_power", "Apparent power", NULL},
257 {SR_MQ_MASS, 0, "mass", "Mass", NULL},
258 {SR_MQ_HARMONIC_RATIO, 0, "harmonic_ratio", "Harmonic ratio", NULL},
262 /* Please use the same order as in enum sr_mqflag (libsigrok.h). */
263 static struct sr_key_info sr_key_info_mqflag[] = {
264 {SR_MQFLAG_AC, 0, "ac", "AC", NULL},
265 {SR_MQFLAG_DC, 0, "dc", "DC", NULL},
266 {SR_MQFLAG_RMS, 0, "rms", "RMS", NULL},
267 {SR_MQFLAG_DIODE, 0, "diode", "Diode", NULL},
268 {SR_MQFLAG_HOLD, 0, "hold", "Hold", NULL},
269 {SR_MQFLAG_MAX, 0, "max", "Max", NULL},
270 {SR_MQFLAG_MIN, 0, "min", "Min", NULL},
271 {SR_MQFLAG_AUTORANGE, 0, "auto_range", "Auto range", NULL},
272 {SR_MQFLAG_RELATIVE, 0, "relative", "Relative", NULL},
273 {SR_MQFLAG_SPL_FREQ_WEIGHT_A, 0, "spl_freq_weight_a",
274 "Frequency weighted (A)", NULL},
275 {SR_MQFLAG_SPL_FREQ_WEIGHT_C, 0, "spl_freq_weight_c",
276 "Frequency weighted (C)", NULL},
277 {SR_MQFLAG_SPL_FREQ_WEIGHT_Z, 0, "spl_freq_weight_z",
278 "Frequency weighted (Z)", NULL},
279 {SR_MQFLAG_SPL_FREQ_WEIGHT_FLAT, 0, "spl_freq_weight_flat",
280 "Frequency weighted (flat)", NULL},
281 {SR_MQFLAG_SPL_TIME_WEIGHT_S, 0, "spl_time_weight_s",
282 "Time weighted (S)", NULL},
283 {SR_MQFLAG_SPL_TIME_WEIGHT_F, 0, "spl_time_weight_f",
284 "Time weighted (F)", NULL},
285 {SR_MQFLAG_SPL_LAT, 0, "spl_time_average", "Time-averaged (LEQ)", NULL},
286 {SR_MQFLAG_SPL_PCT_OVER_ALARM, 0, "spl_pct_over_alarm",
287 "Percentage over alarm", NULL},
288 {SR_MQFLAG_DURATION, 0, "duration", "Duration", NULL},
289 {SR_MQFLAG_AVG, 0, "average", "Average", NULL},
290 {SR_MQFLAG_REFERENCE, 0, "reference", "Reference", NULL},
291 {SR_MQFLAG_UNSTABLE, 0, "unstable", "Unstable", NULL},
292 {SR_MQFLAG_FOUR_WIRE, 0, "four_wire", "4-Wire", NULL},
296 /* This must handle all the keys from enum sr_datatype (libsigrok.h). */
298 SR_PRIV const GVariantType *sr_variant_type_get(int datatype)
302 return G_VARIANT_TYPE_INT32;
304 return G_VARIANT_TYPE_UINT64;
306 return G_VARIANT_TYPE_STRING;
308 return G_VARIANT_TYPE_BOOLEAN;
310 return G_VARIANT_TYPE_DOUBLE;
311 case SR_T_RATIONAL_PERIOD:
312 case SR_T_RATIONAL_VOLT:
313 case SR_T_UINT64_RANGE:
314 case SR_T_DOUBLE_RANGE:
315 return G_VARIANT_TYPE_TUPLE;
317 return G_VARIANT_TYPE_DICTIONARY;
319 return G_VARIANT_TYPE_TUPLE;
326 SR_PRIV int sr_variant_type_check(uint32_t key, GVariant *value)
328 const struct sr_key_info *info;
329 const GVariantType *type, *expected;
330 char *expected_string, *type_string;
332 info = sr_key_info_get(SR_KEY_CONFIG, key);
336 expected = sr_variant_type_get(info->datatype);
337 type = g_variant_get_type(value);
338 if (!g_variant_type_equal(type, expected)
339 && !g_variant_type_is_subtype_of(type, expected)) {
340 expected_string = g_variant_type_dup_string(expected);
341 type_string = g_variant_type_dup_string(type);
342 sr_err("Wrong variant type for key '%s': expected '%s', got '%s'",
343 info->name, expected_string, type_string);
344 g_free(expected_string);
353 * Return the list of supported hardware drivers.
355 * @param[in] ctx Pointer to a libsigrok context struct. Must not be NULL.
357 * @retval NULL The ctx argument was NULL, or there are no supported drivers.
358 * @retval Other Pointer to the NULL-terminated list of hardware drivers.
359 * The user should NOT g_free() this list, sr_exit() will do that.
363 SR_API struct sr_dev_driver **sr_driver_list(const struct sr_context *ctx)
368 return ctx->driver_list;
372 * Initialize a hardware driver.
374 * This usually involves memory allocations and variable initializations
375 * within the driver, but _not_ scanning for attached devices.
376 * The API call sr_driver_scan() is used for that.
378 * @param ctx A libsigrok context object allocated by a previous call to
379 * sr_init(). Must not be NULL.
380 * @param driver The driver to initialize. This must be a pointer to one of
381 * the entries returned by sr_driver_list(). Must not be NULL.
383 * @retval SR_OK Success
384 * @retval SR_ERR_ARG Invalid parameter(s).
385 * @retval SR_ERR_BUG Internal errors.
386 * @retval other Another negative error code upon other errors.
390 SR_API int sr_driver_init(struct sr_context *ctx, struct sr_dev_driver *driver)
395 sr_err("Invalid libsigrok context, can't initialize.");
400 sr_err("Invalid driver, can't initialize.");
404 /* No log message here, too verbose and not very useful. */
406 if ((ret = driver->init(driver, ctx)) < 0)
407 sr_err("Failed to initialize the driver: %d.", ret);
413 * Enumerate scan options supported by this driver.
415 * Before calling sr_driver_scan_options_list(), the user must have previously
416 * initialized the driver by calling sr_driver_init().
418 * @param driver The driver to enumerate options for. This must be a pointer
419 * to one of the entries returned by sr_driver_list(). Must not
422 * @return A GArray * of uint32_t entries, or NULL on invalid arguments. Each
423 * entry is a configuration key that is supported as a scan option.
424 * The array must be freed by the caller using g_array_free().
428 SR_API GArray *sr_driver_scan_options_list(const struct sr_dev_driver *driver)
431 const uint32_t *opts;
435 if (sr_config_list(driver, NULL, NULL, SR_CONF_SCAN_OPTIONS, &gvar) != SR_OK)
438 opts = g_variant_get_fixed_array(gvar, &num_opts, sizeof(uint32_t));
440 result = g_array_sized_new(FALSE, FALSE, sizeof(uint32_t), num_opts);
442 g_array_insert_vals(result, 0, opts, num_opts);
444 g_variant_unref(gvar);
449 static int check_options(struct sr_dev_driver *driver, GSList *options,
450 uint32_t optlist_key, struct sr_dev_inst *sdi,
451 struct sr_channel_group *cg)
453 struct sr_config *src;
454 const struct sr_key_info *srci;
457 const uint32_t *opts;
461 if (sr_config_list(driver, sdi, cg, optlist_key, &gvar_opts) != SR_OK) {
462 /* Driver publishes no options for this optlist. */
467 opts = g_variant_get_fixed_array(gvar_opts, &num_opts, sizeof(uint32_t));
468 for (l = options; l; l = l->next) {
470 for (i = 0; i < num_opts; i++) {
471 if (opts[i] == src->key)
475 if (!(srci = sr_key_info_get(SR_KEY_CONFIG, src->key)))
476 /* Shouldn't happen. */
477 sr_err("Invalid option %d.", src->key);
479 sr_err("Invalid option '%s'.", srci->id);
483 if (sr_variant_type_check(src->key, src->data) != SR_OK) {
488 g_variant_unref(gvar_opts);
494 * Tell a hardware driver to scan for devices.
496 * In addition to the detection, the devices that are found are also
497 * initialized automatically. On some devices, this involves a firmware upload,
498 * or other such measures.
500 * The order in which the system is scanned for devices is not specified. The
501 * caller should not assume or rely on any specific order.
503 * Before calling sr_driver_scan(), the user must have previously initialized
504 * the driver by calling sr_driver_init().
506 * @param driver The driver that should scan. This must be a pointer to one of
507 * the entries returned by sr_driver_list(). Must not be NULL.
508 * @param options A list of 'struct sr_hwopt' options to pass to the driver's
509 * scanner. Can be NULL/empty.
511 * @return A GSList * of 'struct sr_dev_inst', or NULL if no devices were
512 * found (or errors were encountered). This list must be freed by the
513 * caller using g_slist_free(), but without freeing the data pointed
518 SR_API GSList *sr_driver_scan(struct sr_dev_driver *driver, GSList *options)
523 sr_err("Invalid driver, can't scan for devices.");
527 if (!driver->context) {
528 sr_err("Driver not initialized, can't scan for devices.");
533 if (check_options(driver, options, SR_CONF_SCAN_OPTIONS, NULL, NULL) != SR_OK)
537 l = driver->scan(driver, options);
539 sr_spew("Scan found %d devices (%s).", g_slist_length(l), driver->name);
545 * Call driver cleanup function for all drivers.
547 * @param[in] ctx Pointer to a libsigrok context struct. Must not be NULL.
551 SR_PRIV void sr_hw_cleanup_all(const struct sr_context *ctx)
554 struct sr_dev_driver **drivers;
559 sr_dbg("Cleaning up all drivers.");
561 drivers = sr_driver_list(ctx);
562 for (i = 0; drivers[i]; i++) {
563 if (drivers[i]->cleanup)
564 drivers[i]->cleanup(drivers[i]);
565 drivers[i]->context = NULL;
570 * Allocate struct sr_config.
572 * A floating reference can be passed in for data.
576 SR_PRIV struct sr_config *sr_config_new(uint32_t key, GVariant *data)
578 struct sr_config *src;
580 src = g_malloc0(sizeof(struct sr_config));
582 src->data = g_variant_ref_sink(data);
588 * Free struct sr_config.
592 SR_PRIV void sr_config_free(struct sr_config *src)
594 if (!src || !src->data) {
595 sr_err("%s: invalid data!", __func__);
599 g_variant_unref(src->data);
604 SR_PRIV int sr_dev_acquisition_start(struct sr_dev_inst *sdi)
606 if (!sdi || !sdi->driver) {
607 sr_err("%s: Invalid arguments.", __func__);
611 if (sdi->status != SR_ST_ACTIVE) {
612 sr_err("%s: Device instance not active, can't start.",
614 return SR_ERR_DEV_CLOSED;
617 sr_dbg("%s: Starting acquisition.", sdi->driver->name);
619 return sdi->driver->dev_acquisition_start(sdi);
623 SR_PRIV int sr_dev_acquisition_stop(struct sr_dev_inst *sdi)
625 if (!sdi || !sdi->driver) {
626 sr_err("%s: Invalid arguments.", __func__);
630 if (sdi->status != SR_ST_ACTIVE) {
631 sr_err("%s: Device instance not active, can't stop.",
633 return SR_ERR_DEV_CLOSED;
636 sr_dbg("%s: Stopping acquisition.", sdi->driver->name);
638 return sdi->driver->dev_acquisition_stop(sdi);
641 static void log_key(const struct sr_dev_inst *sdi,
642 const struct sr_channel_group *cg, uint32_t key, unsigned int op,
646 const struct sr_key_info *srci;
649 /* Don't log SR_CONF_DEVICE_OPTIONS, it's verbose and not too useful. */
650 if (key == SR_CONF_DEVICE_OPTIONS)
653 opstr = op == SR_CONF_GET ? "get" : op == SR_CONF_SET ? "set" : "list";
654 srci = sr_key_info_get(SR_KEY_CONFIG, key);
656 tmp_str = g_variant_print(data, TRUE);
657 sr_spew("sr_config_%s(): key %d (%s) sdi %p cg %s -> %s", opstr, key,
658 srci ? srci->id : "NULL", sdi, cg ? cg->name : "NULL",
659 data ? tmp_str : "NULL");
663 static int check_key(const struct sr_dev_driver *driver,
664 const struct sr_dev_inst *sdi, const struct sr_channel_group *cg,
665 uint32_t key, unsigned int op, GVariant *data)
667 const struct sr_key_info *srci;
670 const uint32_t *opts;
676 suffix = " for this device instance and channel group";
678 suffix = " for this device instance";
682 if (!(srci = sr_key_info_get(SR_KEY_CONFIG, key))) {
683 sr_err("Invalid key %d.", key);
686 opstr = op == SR_CONF_GET ? "get" : op == SR_CONF_SET ? "set" : "list";
689 case SR_CONF_LIMIT_MSEC:
690 case SR_CONF_LIMIT_SAMPLES:
691 case SR_CONF_SAMPLERATE:
692 /* Setting any of these to 0 is not useful. */
693 if (op != SR_CONF_SET || !data)
695 if (g_variant_get_uint64(data) == 0) {
696 sr_err("Cannot set '%s' to 0.", srci->id);
700 case SR_CONF_CAPTURE_RATIO:
701 /* Capture ratio must always be between 0 and 100. */
702 if (op != SR_CONF_SET || !data)
704 if (g_variant_get_uint64(data) > 100) {
705 sr_err("Capture ratio must be 0..100.");
711 if (sr_config_list(driver, sdi, cg, SR_CONF_DEVICE_OPTIONS, &gvar_opts) != SR_OK) {
712 /* Driver publishes no options. */
713 sr_err("No options available%s.", suffix);
716 opts = g_variant_get_fixed_array(gvar_opts, &num_opts, sizeof(uint32_t));
718 for (i = 0; i < num_opts; i++) {
719 if ((opts[i] & SR_CONF_MASK) == key) {
724 g_variant_unref(gvar_opts);
726 sr_err("Option '%s' not available%s.", srci->id, suffix);
730 if (!(pub_opt & op)) {
731 sr_err("Option '%s' not available to %s%s.", srci->id, opstr, suffix);
739 * Query value of a configuration key at the given driver or device instance.
741 * @param[in] driver The sr_dev_driver struct to query. Must not be NULL.
742 * @param[in] sdi (optional) If the key is specific to a device, this must
743 * contain a pointer to the struct sr_dev_inst to be checked.
744 * Otherwise it must be NULL. If sdi is != NULL, sdi->priv must
746 * @param[in] cg The channel group on the device for which to list the
748 * @param[in] key The configuration key (SR_CONF_*).
749 * @param[in,out] data Pointer to a GVariant where the value will be stored.
750 * Must not be NULL. The caller is given ownership of the GVariant
751 * and must thus decrease the refcount after use. However if
752 * this function returns an error code, the field should be
753 * considered unused, and should not be unreferenced.
755 * @retval SR_OK Success.
756 * @retval SR_ERR Error.
757 * @retval SR_ERR_ARG The driver doesn't know that key, but this is not to be
758 * interpreted as an error by the caller; merely as an indication
759 * that it's not applicable.
763 SR_API int sr_config_get(const struct sr_dev_driver *driver,
764 const struct sr_dev_inst *sdi,
765 const struct sr_channel_group *cg,
766 uint32_t key, GVariant **data)
770 if (!driver || !data)
773 if (!driver->config_get)
776 if (check_key(driver, sdi, cg, key, SR_CONF_GET, NULL) != SR_OK)
779 if (sdi && !sdi->priv) {
780 sr_err("Can't get config (sdi != NULL, sdi->priv == NULL).");
784 if ((ret = driver->config_get(key, data, sdi, cg)) == SR_OK) {
785 log_key(sdi, cg, key, SR_CONF_GET, *data);
786 /* Got a floating reference from the driver. Sink it here,
787 * caller will need to unref when done with it. */
788 g_variant_ref_sink(*data);
791 if (ret == SR_ERR_CHANNEL_GROUP)
792 sr_err("%s: No channel group specified.",
793 (sdi) ? sdi->driver->name : "unknown");
799 * Set value of a configuration key in a device instance.
801 * @param[in] sdi The device instance. Must not be NULL. sdi->driver and
802 * sdi->priv must not be NULL either.
803 * @param[in] cg The channel group on the device for which to list the
805 * @param[in] key The configuration key (SR_CONF_*).
806 * @param data The new value for the key, as a GVariant with GVariantType
807 * appropriate to that key. A floating reference can be passed
808 * in; its refcount will be sunk and unreferenced after use.
810 * @retval SR_OK Success.
811 * @retval SR_ERR Error.
812 * @retval SR_ERR_ARG The driver doesn't know that key, but this is not to be
813 * interpreted as an error by the caller; merely as an indication
814 * that it's not applicable.
818 SR_API int sr_config_set(const struct sr_dev_inst *sdi,
819 const struct sr_channel_group *cg,
820 uint32_t key, GVariant *data)
824 g_variant_ref_sink(data);
826 if (!sdi || !sdi->driver || !sdi->priv || !data)
828 else if (!sdi->driver->config_set)
830 else if (sdi->status != SR_ST_ACTIVE) {
831 sr_err("%s: Device instance not active, can't set config.",
833 ret = SR_ERR_DEV_CLOSED;
834 } else if (check_key(sdi->driver, sdi, cg, key, SR_CONF_SET, data) != SR_OK)
836 else if ((ret = sr_variant_type_check(key, data)) == SR_OK) {
837 log_key(sdi, cg, key, SR_CONF_SET, data);
838 ret = sdi->driver->config_set(key, data, sdi, cg);
841 g_variant_unref(data);
843 if (ret == SR_ERR_CHANNEL_GROUP)
844 sr_err("%s: No channel group specified.",
845 (sdi) ? sdi->driver->name : "unknown");
851 * Apply configuration settings to the device hardware.
853 * @param sdi The device instance.
855 * @return SR_OK upon success or SR_ERR in case of error.
859 SR_API int sr_config_commit(const struct sr_dev_inst *sdi)
863 if (!sdi || !sdi->driver)
865 else if (!sdi->driver->config_commit)
867 else if (sdi->status != SR_ST_ACTIVE) {
868 sr_err("%s: Device instance not active, can't commit config.",
870 ret = SR_ERR_DEV_CLOSED;
872 ret = sdi->driver->config_commit(sdi);
878 * List all possible values for a configuration key.
880 * @param[in] driver The sr_dev_driver struct to query. Must not be NULL.
881 * @param[in] sdi (optional) If the key is specific to a device instance, this
882 * must contain a pointer to the struct sr_dev_inst to be checked.
883 * Otherwise it must be NULL. If sdi is != NULL, sdi->priv must
885 * @param[in] cg The channel group on the device instance for which to list
886 * the values, or NULL. If this device instance doesn't
887 * have channel groups, this must not be != NULL.
888 * If cg is NULL, this function will return the "common" device
889 * instance options that are channel-group independent. Otherwise
890 * it will return the channel-group specific options.
891 * @param[in] key The configuration key (SR_CONF_*).
892 * @param[in,out] data A pointer to a GVariant where the list will be stored.
893 * The caller is given ownership of the GVariant and must thus
894 * unref the GVariant after use. However if this function
895 * returns an error code, the field should be considered
896 * unused, and should not be unreferenced.
898 * @retval SR_OK Success.
899 * @retval SR_ERR Error.
900 * @retval SR_ERR_ARG The driver doesn't know that key, but this is not to be
901 * interpreted as an error by the caller; merely as an indication
902 * that it's not applicable.
906 SR_API int sr_config_list(const struct sr_dev_driver *driver,
907 const struct sr_dev_inst *sdi,
908 const struct sr_channel_group *cg,
909 uint32_t key, GVariant **data)
913 if (!driver || !data)
916 if (!driver->config_list)
919 if (key != SR_CONF_SCAN_OPTIONS && key != SR_CONF_DEVICE_OPTIONS) {
920 if (check_key(driver, sdi, cg, key, SR_CONF_LIST, NULL) != SR_OK)
924 if (sdi && !sdi->priv) {
925 sr_err("Can't list config (sdi != NULL, sdi->priv == NULL).");
929 if (key != SR_CONF_SCAN_OPTIONS && key != SR_CONF_DEVICE_OPTIONS && !sdi) {
930 sr_err("Config keys other than SR_CONF_SCAN_OPTIONS and "
931 "SR_CONF_DEVICE_OPTIONS always need an sdi.");
935 if (cg && sdi && !sdi->channel_groups) {
936 sr_err("Can't list config for channel group, there are none.");
940 if (cg && sdi && !g_slist_find(sdi->channel_groups, cg)) {
941 sr_err("If a channel group is specified, it must be a valid one.");
946 sr_err("Need sdi when a channel group is specified.");
950 if ((ret = driver->config_list(key, data, sdi, cg)) == SR_OK) {
951 log_key(sdi, cg, key, SR_CONF_LIST, *data);
952 g_variant_ref_sink(*data);
955 if (ret == SR_ERR_CHANNEL_GROUP)
956 sr_err("%s: No channel group specified.",
957 (sdi) ? sdi->driver->name : "unknown");
962 static struct sr_key_info *get_keytable(int keytype)
964 struct sr_key_info *table;
968 table = sr_key_info_config;
971 table = sr_key_info_mq;
974 table = sr_key_info_mqflag;
977 sr_err("Invalid keytype %d", keytype);
985 * Get information about a key, by key.
987 * @param[in] keytype The namespace the key is in.
988 * @param[in] key The key to find.
990 * @return A pointer to a struct sr_key_info, or NULL if the key
995 SR_API const struct sr_key_info *sr_key_info_get(int keytype, uint32_t key)
997 struct sr_key_info *table;
1000 if (!(table = get_keytable(keytype)))
1003 for (i = 0; table[i].key; i++) {
1004 if (table[i].key == key)
1012 * Get information about a key, by name.
1014 * @param[in] keytype The namespace the key is in.
1015 * @param[in] keyid The key id string.
1017 * @return A pointer to a struct sr_key_info, or NULL if the key
1022 SR_API const struct sr_key_info *sr_key_info_name_get(int keytype, const char *keyid)
1024 struct sr_key_info *table;
1027 if (!(table = get_keytable(keytype)))
1030 for (i = 0; table[i].key; i++) {
1033 if (!strcmp(table[i].id, keyid))