2 * This file is part of the sigrok project.
4 * Copyright (C) 2010-2012 Bert Vermeulen <bert@biot.com>
6 * This program is free software: you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation, either version 3 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program. If not, see <http://www.gnu.org/licenses/>.
23 #include <sys/types.h>
38 #include <arpa/inet.h>
41 #include "libsigrok.h"
42 #include "libsigrok-internal.h"
46 #define O_NONBLOCK FIONBIO
49 static const int hwcaps[] = {
50 SR_HWCAP_LOGIC_ANALYZER,
52 SR_HWCAP_CAPTURE_RATIO,
53 SR_HWCAP_LIMIT_SAMPLES,
58 /* Probes are numbered 0-31 (on the PCB silkscreen). */
59 static const char *probe_names[NUM_PROBES + 1] = {
95 /* default supported samplerates, can be overridden by device metadata */
96 static const struct sr_samplerates samplerates = {
103 SR_PRIV struct sr_dev_driver ols_driver_info;
104 static struct sr_dev_driver *odi = &ols_driver_info;
106 static int send_shortcommand(int fd, uint8_t command)
110 sr_dbg("ols: sending cmd 0x%.2x", command);
112 if (serial_write(fd, buf, 1) != 1)
118 static int send_longcommand(int fd, uint8_t command, uint32_t data)
122 sr_dbg("ols: sending cmd 0x%.2x data 0x%.8x", command, data);
124 buf[1] = (data & 0xff000000) >> 24;
125 buf[2] = (data & 0xff0000) >> 16;
126 buf[3] = (data & 0xff00) >> 8;
127 buf[4] = data & 0xff;
128 if (serial_write(fd, buf, 5) != 5)
134 static int configure_probes(struct dev_context *devc, const GSList *probes)
136 const struct sr_probe *probe;
138 int probe_bit, stage, i;
141 devc->probe_mask = 0;
142 for (i = 0; i < NUM_TRIGGER_STAGES; i++) {
143 devc->trigger_mask[i] = 0;
144 devc->trigger_value[i] = 0;
147 devc->num_stages = 0;
148 for (l = probes; l; l = l->next) {
149 probe = (const struct sr_probe *)l->data;
154 * Set up the probe mask for later configuration into the
157 probe_bit = 1 << (probe->index);
158 devc->probe_mask |= probe_bit;
163 /* Configure trigger mask and value. */
165 for (tc = probe->trigger; tc && *tc; tc++) {
166 devc->trigger_mask[stage] |= probe_bit;
168 devc->trigger_value[stage] |= probe_bit;
172 * TODO: Only supporting parallel mode, with
177 if (stage > devc->num_stages)
178 devc->num_stages = stage;
184 static uint32_t reverse16(uint32_t in)
188 out = (in & 0xff) << 8;
189 out |= (in & 0xff00) >> 8;
190 out |= (in & 0xff0000) << 8;
191 out |= (in & 0xff000000) >> 8;
196 static uint32_t reverse32(uint32_t in)
200 out = (in & 0xff) << 24;
201 out |= (in & 0xff00) << 8;
202 out |= (in & 0xff0000) >> 8;
203 out |= (in & 0xff000000) >> 24;
208 static struct dev_context *ols_dev_new(void)
210 struct dev_context *devc;
212 /* TODO: Is 'devc' ever g_free()'d? */
213 if (!(devc = g_try_malloc0(sizeof(struct dev_context)))) {
214 sr_err("ols: %s: devc malloc failed", __func__);
218 devc->trigger_at = -1;
219 devc->probe_mask = 0xffffffff;
220 devc->cur_samplerate = SR_KHZ(200);
226 static struct sr_dev_inst *get_metadata(int fd)
228 struct sr_dev_inst *sdi;
229 struct dev_context *devc;
230 struct sr_probe *probe;
231 uint32_t tmp_int, ui;
232 uint8_t key, type, token;
233 GString *tmp_str, *devname, *version;
236 sdi = sr_dev_inst_new(0, SR_ST_INACTIVE, NULL, NULL, NULL);
238 devc = ols_dev_new();
241 devname = g_string_new("");
242 version = g_string_new("");
246 if (serial_read(fd, &key, 1) != 1 || key == 0x00)
252 /* NULL-terminated string */
253 tmp_str = g_string_new("");
254 while (serial_read(fd, &tmp_c, 1) == 1 && tmp_c != '\0')
255 g_string_append_c(tmp_str, tmp_c);
256 sr_dbg("ols: got metadata key 0x%.2x value '%s'",
261 devname = g_string_append(devname, tmp_str->str);
264 /* FPGA firmware version */
266 g_string_append(version, ", ");
267 g_string_append(version, "FPGA version ");
268 g_string_append(version, tmp_str->str);
271 /* Ancillary version */
273 g_string_append(version, ", ");
274 g_string_append(version, "Ancillary version ");
275 g_string_append(version, tmp_str->str);
278 sr_info("ols: unknown token 0x%.2x: '%s'",
279 token, tmp_str->str);
282 g_string_free(tmp_str, TRUE);
285 /* 32-bit unsigned integer */
286 if (serial_read(fd, &tmp_int, 4) != 4)
288 tmp_int = reverse32(tmp_int);
289 sr_dbg("ols: got metadata key 0x%.2x value 0x%.8x",
293 /* Number of usable probes */
294 for (ui = 0; ui < tmp_int; ui++) {
295 if (!(probe = sr_probe_new(ui, SR_PROBE_LOGIC, TRUE,
298 sdi->probes = g_slist_append(sdi->probes, probe);
302 /* Amount of sample memory available (bytes) */
303 devc->max_samples = tmp_int;
306 /* Amount of dynamic memory available (bytes) */
307 /* what is this for? */
310 /* Maximum sample rate (hz) */
311 devc->max_samplerate = tmp_int;
314 /* protocol version */
315 devc->protocol_version = tmp_int;
318 sr_info("ols: unknown token 0x%.2x: 0x%.8x",
324 /* 8-bit unsigned integer */
325 if (serial_read(fd, &tmp_c, 1) != 1)
327 sr_dbg("ols: got metadata key 0x%.2x value 0x%.2x",
331 /* Number of usable probes */
332 for (ui = 0; ui < tmp_c; ui++) {
333 if (!(probe = sr_probe_new(ui, SR_PROBE_LOGIC, TRUE,
336 sdi->probes = g_slist_append(sdi->probes, probe);
340 /* protocol version */
341 devc->protocol_version = tmp_c;
344 sr_info("ols: unknown token 0x%.2x: 0x%.2x",
355 sdi->model = devname->str;
356 sdi->version = version->str;
357 g_string_free(devname, FALSE);
358 g_string_free(version, FALSE);
363 static int hw_init(void)
365 struct drv_context *drvc;
367 if (!(drvc = g_try_malloc0(sizeof(struct drv_context)))) {
368 sr_err("ols: driver context malloc failed.");
376 static GSList *hw_scan(GSList *options)
378 struct sr_dev_inst *sdi;
379 struct drv_context *drvc;
380 struct dev_context *devc;
381 struct sr_probe *probe;
382 GSList *devices, *ports, *l;
383 GPollFD *fds, probefd;
384 int devcnt, final_devcnt, num_ports, fd, ret, i, j;
385 char buf[8], **dev_names, **serial_params;
392 /* Scan all serial ports. */
393 ports = list_serial_ports();
394 num_ports = g_slist_length(ports);
396 if (!(fds = g_try_malloc0(num_ports * sizeof(GPollFD)))) {
397 sr_err("ols: %s: fds malloc failed", __func__);
398 goto hw_init_free_ports; /* TODO: SR_ERR_MALLOC. */
401 if (!(dev_names = g_try_malloc(num_ports * sizeof(char *)))) {
402 sr_err("ols: %s: dev_names malloc failed", __func__);
403 goto hw_init_free_fds; /* TODO: SR_ERR_MALLOC. */
406 if (!(serial_params = g_try_malloc(num_ports * sizeof(char *)))) {
407 sr_err("ols: %s: serial_params malloc failed", __func__);
408 goto hw_init_free_dev_names; /* TODO: SR_ERR_MALLOC. */
412 for (l = ports; l; l = l->next) {
413 /* The discovery procedure is like this: first send the Reset
414 * command (0x00) 5 times, since the device could be anywhere
415 * in a 5-byte command. Then send the ID command (0x02).
416 * If the device responds with 4 bytes ("OLS1" or "SLA1"), we
419 * Since it may take the device a while to respond at 115Kb/s,
420 * we do all the sending first, then wait for all of them to
421 * respond with g_poll().
423 sr_info("ols: probing %s...", (char *)l->data);
424 fd = serial_open(l->data, O_RDWR | O_NONBLOCK);
426 serial_params[devcnt] = serial_backup_params(fd);
427 serial_set_params(fd, 115200, 8, SERIAL_PARITY_NONE, 1, 2);
429 for (i = 0; i < 5; i++) {
430 if ((ret = send_shortcommand(fd,
431 CMD_RESET)) != SR_OK) {
432 /* Serial port is not writable. */
437 serial_restore_params(fd,
438 serial_params[devcnt]);
442 send_shortcommand(fd, CMD_ID);
444 fds[devcnt].events = G_IO_IN;
445 dev_names[devcnt] = g_strdup(l->data);
451 /* 2ms isn't enough for reliable transfer with pl2303, let's try 10 */
454 g_poll(fds, devcnt, 1);
456 for (i = 0; i < devcnt; i++) {
457 if (fds[i].revents != G_IO_IN)
459 if (serial_read(fds[i].fd, buf, 4) != 4)
461 if (strncmp(buf, "1SLO", 4) && strncmp(buf, "1ALS", 4))
464 /* definitely using the OLS protocol, check if it supports
465 * the metadata command
467 send_shortcommand(fds[i].fd, CMD_METADATA);
468 probefd.fd = fds[i].fd;
469 probefd.events = G_IO_IN;
470 if (g_poll(&probefd, 1, 10) > 0) {
472 sdi = get_metadata(fds[i].fd);
473 sdi->index = final_devcnt;
476 /* not an OLS -- some other board that uses the sump protocol */
477 sdi = sr_dev_inst_new(final_devcnt, SR_ST_INACTIVE,
478 "Sump", "Logic Analyzer", "v1.0");
480 devc = ols_dev_new();
481 for (j = 0; j < 32; j++) {
482 if (!(probe = sr_probe_new(j, SR_PROBE_LOGIC, TRUE,
485 sdi->probes = g_slist_append(sdi->probes, probe);
489 devc->serial = sr_serial_dev_inst_new(dev_names[i], -1);
490 drvc->instances = g_slist_append(drvc->instances, sdi);
491 devices = g_slist_append(devices, sdi);
494 serial_close(fds[i].fd);
498 /* clean up after all the probing */
499 for (i = 0; i < devcnt; i++) {
500 if (fds[i].fd != 0) {
501 serial_restore_params(fds[i].fd, serial_params[i]);
502 serial_close(fds[i].fd);
504 g_free(serial_params[i]);
505 g_free(dev_names[i]);
508 g_free(serial_params);
509 hw_init_free_dev_names:
519 static int hw_dev_open(struct sr_dev_inst *sdi)
521 struct dev_context *devc;
525 devc->serial->fd = serial_open(devc->serial->port, O_RDWR);
526 if (devc->serial->fd == -1)
529 sdi->status = SR_ST_ACTIVE;
534 static int hw_dev_close(struct sr_dev_inst *sdi)
536 struct dev_context *devc;
540 if (devc->serial->fd != -1) {
541 serial_close(devc->serial->fd);
542 devc->serial->fd = -1;
543 sdi->status = SR_ST_INACTIVE;
549 static int hw_cleanup(void)
552 struct sr_dev_inst *sdi;
553 struct drv_context *drvc;
554 struct dev_context *devc;
557 if (!(drvc = odi->priv))
560 /* Properly close and free all devices. */
561 for (l = drvc->instances; l; l = l->next) {
562 if (!(sdi = l->data)) {
563 /* Log error, but continue cleaning up the rest. */
564 sr_err("ols: %s: sdi was NULL, continuing", __func__);
568 if (!(devc = sdi->priv)) {
569 /* Log error, but continue cleaning up the rest. */
570 sr_err("ols: %s: sdi->priv was NULL, continuing",
575 /* TODO: Check for serial != NULL. */
576 if (devc->serial->fd != -1)
577 serial_close(devc->serial->fd);
578 sr_serial_dev_inst_free(devc->serial);
579 sr_dev_inst_free(sdi);
581 g_slist_free(drvc->instances);
582 drvc->instances = NULL;
587 static int hw_info_get(int info_id, const void **data,
588 const struct sr_dev_inst *sdi)
590 struct dev_context *devc;
596 case SR_DI_NUM_PROBES:
597 *data = GINT_TO_POINTER(1);
599 case SR_DI_PROBE_NAMES:
602 case SR_DI_SAMPLERATES:
603 *data = &samplerates;
605 case SR_DI_TRIGGER_TYPES:
606 *data = (char *)TRIGGER_TYPES;
608 case SR_DI_CUR_SAMPLERATE:
611 *data = &devc->cur_samplerate;
622 static int set_samplerate(const struct sr_dev_inst *sdi, uint64_t samplerate)
624 struct dev_context *devc;
627 if (devc->max_samplerate) {
628 if (samplerate > devc->max_samplerate)
629 return SR_ERR_SAMPLERATE;
630 } else if (samplerate < samplerates.low || samplerate > samplerates.high)
631 return SR_ERR_SAMPLERATE;
633 if (samplerate > CLOCK_RATE) {
634 devc->flag_reg |= FLAG_DEMUX;
635 devc->cur_samplerate_divider = (CLOCK_RATE * 2 / samplerate) - 1;
637 devc->flag_reg &= ~FLAG_DEMUX;
638 devc->cur_samplerate_divider = (CLOCK_RATE / samplerate) - 1;
641 /* Calculate actual samplerate used and complain if it is different
642 * from the requested.
644 devc->cur_samplerate = CLOCK_RATE / (devc->cur_samplerate_divider + 1);
645 if (devc->flag_reg & FLAG_DEMUX)
646 devc->cur_samplerate *= 2;
647 if (devc->cur_samplerate != samplerate)
648 sr_err("ols: can't match samplerate %" PRIu64 ", using %"
649 PRIu64, samplerate, devc->cur_samplerate);
654 static int hw_dev_config_set(const struct sr_dev_inst *sdi, int hwcap,
657 struct dev_context *devc;
659 const uint64_t *tmp_u64;
663 if (sdi->status != SR_ST_ACTIVE)
667 case SR_HWCAP_SAMPLERATE:
668 ret = set_samplerate(sdi, *(const uint64_t *)value);
670 case SR_HWCAP_PROBECONFIG:
671 ret = configure_probes(devc, (const GSList *)value);
673 case SR_HWCAP_LIMIT_SAMPLES:
675 if (*tmp_u64 < MIN_NUM_SAMPLES)
677 if (*tmp_u64 > devc->max_samples)
678 sr_err("ols: sample limit exceeds hw max");
679 devc->limit_samples = *tmp_u64;
680 sr_info("ols: sample limit %" PRIu64, devc->limit_samples);
683 case SR_HWCAP_CAPTURE_RATIO:
684 devc->capture_ratio = *(const uint64_t *)value;
685 if (devc->capture_ratio < 0 || devc->capture_ratio > 100) {
686 devc->capture_ratio = 0;
692 if (GPOINTER_TO_INT(value)) {
693 sr_info("ols: enabling RLE");
694 devc->flag_reg |= FLAG_RLE;
705 static void abort_acquisition(const struct sr_dev_inst *sdi)
707 struct sr_datafeed_packet packet;
708 struct dev_context *devc;
711 sr_source_remove(devc->serial->fd);
713 /* Terminate session */
714 packet.type = SR_DF_END;
715 sr_session_send(sdi, &packet);
721 static int receive_data(int fd, int revents, void *cb_data)
723 struct sr_datafeed_packet packet;
724 struct sr_datafeed_logic logic;
725 struct sr_dev_inst *sdi;
726 struct drv_context *drvc;
727 struct dev_context *devc;
729 int num_channels, offset, i, j;
734 /* Find this device's devc struct by its fd. */
736 for (l = drvc->instances; l; l = l->next) {
739 if (devc->serial->fd == fd) {
745 /* Shouldn't happen. */
748 if (devc->num_transfers++ == 0) {
750 * First time round, means the device started sending data,
751 * and will not stop until done. If it stops sending for
752 * longer than it takes to send a byte, that means it's
753 * finished. We'll double that to 30ms to be sure...
755 sr_source_remove(fd);
756 sr_source_add(fd, G_IO_IN, 30, receive_data, cb_data);
757 devc->raw_sample_buf = g_try_malloc(devc->limit_samples * 4);
758 if (!devc->raw_sample_buf) {
759 sr_err("ols: %s: devc->raw_sample_buf malloc failed",
763 /* fill with 1010... for debugging */
764 memset(devc->raw_sample_buf, 0x82, devc->limit_samples * 4);
768 for (i = 0x20; i > 0x02; i /= 2) {
769 if ((devc->flag_reg & i) == 0)
773 if (revents == G_IO_IN) {
774 if (serial_read(fd, &byte, 1) != 1)
777 /* Ignore it if we've read enough. */
778 if (devc->num_samples >= devc->limit_samples)
781 devc->sample[devc->num_bytes++] = byte;
782 sr_dbg("ols: received byte 0x%.2x", byte);
783 if (devc->num_bytes == num_channels) {
784 /* Got a full sample. */
785 sr_dbg("ols: received sample 0x%.*x",
786 devc->num_bytes * 2, *(int *)devc->sample);
787 if (devc->flag_reg & FLAG_RLE) {
789 * In RLE mode -1 should never come in as a
790 * sample, because bit 31 is the "count" flag.
792 if (devc->sample[devc->num_bytes - 1] & 0x80) {
793 devc->sample[devc->num_bytes - 1] &= 0x7f;
795 * FIXME: This will only work on
796 * little-endian systems.
798 devc->rle_count = *(int *)(devc->sample);
799 sr_dbg("ols: RLE count = %d", devc->rle_count);
804 devc->num_samples += devc->rle_count + 1;
805 if (devc->num_samples > devc->limit_samples) {
806 /* Save us from overrunning the buffer. */
807 devc->rle_count -= devc->num_samples - devc->limit_samples;
808 devc->num_samples = devc->limit_samples;
811 if (num_channels < 4) {
813 * Some channel groups may have been turned
814 * off, to speed up transfer between the
815 * hardware and the PC. Expand that here before
816 * submitting it over the session bus --
817 * whatever is listening on the bus will be
818 * expecting a full 32-bit sample, based on
819 * the number of probes.
822 memset(devc->tmp_sample, 0, 4);
823 for (i = 0; i < 4; i++) {
824 if (((devc->flag_reg >> 2) & (1 << i)) == 0) {
826 * This channel group was
827 * enabled, copy from received
830 devc->tmp_sample[i] = devc->sample[j++];
833 memcpy(devc->sample, devc->tmp_sample, 4);
834 sr_dbg("ols: full sample 0x%.8x", *(int *)devc->sample);
837 /* the OLS sends its sample buffer backwards.
838 * store it in reverse order here, so we can dump
839 * this on the session bus later.
841 offset = (devc->limit_samples - devc->num_samples) * 4;
842 for (i = 0; i <= devc->rle_count; i++) {
843 memcpy(devc->raw_sample_buf + offset + (i * 4),
846 memset(devc->sample, 0, 4);
852 * This is the main loop telling us a timeout was reached, or
853 * we've acquired all the samples we asked for -- we're done.
854 * Send the (properly-ordered) buffer to the frontend.
856 if (devc->trigger_at != -1) {
857 /* a trigger was set up, so we need to tell the frontend
860 if (devc->trigger_at > 0) {
861 /* there are pre-trigger samples, send those first */
862 packet.type = SR_DF_LOGIC;
863 packet.payload = &logic;
864 logic.length = devc->trigger_at * 4;
866 logic.data = devc->raw_sample_buf +
867 (devc->limit_samples - devc->num_samples) * 4;
868 sr_session_send(cb_data, &packet);
871 /* send the trigger */
872 packet.type = SR_DF_TRIGGER;
873 sr_session_send(cb_data, &packet);
875 /* send post-trigger samples */
876 packet.type = SR_DF_LOGIC;
877 packet.payload = &logic;
878 logic.length = (devc->num_samples * 4) - (devc->trigger_at * 4);
880 logic.data = devc->raw_sample_buf + devc->trigger_at * 4 +
881 (devc->limit_samples - devc->num_samples) * 4;
882 sr_session_send(cb_data, &packet);
884 /* no trigger was used */
885 packet.type = SR_DF_LOGIC;
886 packet.payload = &logic;
887 logic.length = devc->num_samples * 4;
889 logic.data = devc->raw_sample_buf +
890 (devc->limit_samples - devc->num_samples) * 4;
891 sr_session_send(cb_data, &packet);
893 g_free(devc->raw_sample_buf);
898 abort_acquisition(sdi);
904 static int hw_dev_acquisition_start(const struct sr_dev_inst *sdi,
907 struct sr_datafeed_packet *packet;
908 struct sr_datafeed_header *header;
909 struct sr_datafeed_meta_logic meta;
910 struct dev_context *devc;
911 uint32_t trigger_config[4];
913 uint16_t readcount, delaycount;
914 uint8_t changrp_mask;
920 if (sdi->status != SR_ST_ACTIVE)
924 * Enable/disable channel groups in the flag register according to the
925 * probe mask. Calculate this here, because num_channels is needed
926 * to limit readcount.
930 for (i = 0; i < 4; i++) {
931 if (devc->probe_mask & (0xff << (i * 8))) {
932 changrp_mask |= (1 << i);
938 * Limit readcount to prevent reading past the end of the hardware
941 readcount = MIN(devc->max_samples / num_channels, devc->limit_samples) / 4;
943 memset(trigger_config, 0, 16);
944 trigger_config[devc->num_stages - 1] |= 0x08;
945 if (devc->trigger_mask[0]) {
946 delaycount = readcount * (1 - devc->capture_ratio / 100.0);
947 devc->trigger_at = (readcount - delaycount) * 4 - devc->num_stages;
949 if (send_longcommand(devc->serial->fd, CMD_SET_TRIGGER_MASK_0,
950 reverse32(devc->trigger_mask[0])) != SR_OK)
952 if (send_longcommand(devc->serial->fd, CMD_SET_TRIGGER_VALUE_0,
953 reverse32(devc->trigger_value[0])) != SR_OK)
955 if (send_longcommand(devc->serial->fd, CMD_SET_TRIGGER_CONFIG_0,
956 trigger_config[0]) != SR_OK)
959 if (send_longcommand(devc->serial->fd, CMD_SET_TRIGGER_MASK_1,
960 reverse32(devc->trigger_mask[1])) != SR_OK)
962 if (send_longcommand(devc->serial->fd, CMD_SET_TRIGGER_VALUE_1,
963 reverse32(devc->trigger_value[1])) != SR_OK)
965 if (send_longcommand(devc->serial->fd, CMD_SET_TRIGGER_CONFIG_1,
966 trigger_config[1]) != SR_OK)
969 if (send_longcommand(devc->serial->fd, CMD_SET_TRIGGER_MASK_2,
970 reverse32(devc->trigger_mask[2])) != SR_OK)
972 if (send_longcommand(devc->serial->fd, CMD_SET_TRIGGER_VALUE_2,
973 reverse32(devc->trigger_value[2])) != SR_OK)
975 if (send_longcommand(devc->serial->fd, CMD_SET_TRIGGER_CONFIG_2,
976 trigger_config[2]) != SR_OK)
979 if (send_longcommand(devc->serial->fd, CMD_SET_TRIGGER_MASK_3,
980 reverse32(devc->trigger_mask[3])) != SR_OK)
982 if (send_longcommand(devc->serial->fd, CMD_SET_TRIGGER_VALUE_3,
983 reverse32(devc->trigger_value[3])) != SR_OK)
985 if (send_longcommand(devc->serial->fd, CMD_SET_TRIGGER_CONFIG_3,
986 trigger_config[3]) != SR_OK)
989 if (send_longcommand(devc->serial->fd, CMD_SET_TRIGGER_MASK_0,
990 devc->trigger_mask[0]) != SR_OK)
992 if (send_longcommand(devc->serial->fd, CMD_SET_TRIGGER_VALUE_0,
993 devc->trigger_value[0]) != SR_OK)
995 if (send_longcommand(devc->serial->fd, CMD_SET_TRIGGER_CONFIG_0,
996 0x00000008) != SR_OK)
998 delaycount = readcount;
1001 sr_info("ols: setting samplerate to %" PRIu64 " Hz (divider %u, "
1002 "demux %s)", devc->cur_samplerate, devc->cur_samplerate_divider,
1003 devc->flag_reg & FLAG_DEMUX ? "on" : "off");
1004 if (send_longcommand(devc->serial->fd, CMD_SET_DIVIDER,
1005 reverse32(devc->cur_samplerate_divider)) != SR_OK)
1008 /* Send sample limit and pre/post-trigger capture ratio. */
1009 data = ((readcount - 1) & 0xffff) << 16;
1010 data |= (delaycount - 1) & 0xffff;
1011 if (send_longcommand(devc->serial->fd, CMD_CAPTURE_SIZE, reverse16(data)) != SR_OK)
1014 /* The flag register wants them here, and 1 means "disable channel". */
1015 devc->flag_reg |= ~(changrp_mask << 2) & 0x3c;
1016 devc->flag_reg |= FLAG_FILTER;
1017 devc->rle_count = 0;
1018 data = (devc->flag_reg << 24) | ((devc->flag_reg << 8) & 0xff0000);
1019 if (send_longcommand(devc->serial->fd, CMD_SET_FLAGS, data) != SR_OK)
1022 /* Start acquisition on the device. */
1023 if (send_shortcommand(devc->serial->fd, CMD_RUN) != SR_OK)
1026 sr_source_add(devc->serial->fd, G_IO_IN, -1, receive_data,
1029 if (!(packet = g_try_malloc(sizeof(struct sr_datafeed_packet)))) {
1030 sr_err("ols: %s: packet malloc failed", __func__);
1031 return SR_ERR_MALLOC;
1034 if (!(header = g_try_malloc(sizeof(struct sr_datafeed_header)))) {
1035 sr_err("ols: %s: header malloc failed", __func__);
1037 return SR_ERR_MALLOC;
1040 /* Send header packet to the session bus. */
1041 packet->type = SR_DF_HEADER;
1042 packet->payload = (unsigned char *)header;
1043 header->feed_version = 1;
1044 gettimeofday(&header->starttime, NULL);
1045 sr_session_send(cb_data, packet);
1047 /* Send metadata about the SR_DF_LOGIC packets to come. */
1048 packet->type = SR_DF_META_LOGIC;
1049 packet->payload = &meta;
1050 meta.samplerate = devc->cur_samplerate;
1051 meta.num_probes = NUM_PROBES;
1052 sr_session_send(cb_data, packet);
1060 /* TODO: This stops acquisition on ALL devices, ignoring dev_index. */
1061 static int hw_dev_acquisition_stop(const struct sr_dev_inst *sdi,
1065 /* Avoid compiler warnings. */
1068 abort_acquisition(sdi);
1073 SR_PRIV struct sr_dev_driver ols_driver_info = {
1075 .longname = "Openbench Logic Sniffer",
1078 .cleanup = hw_cleanup,
1080 .dev_open = hw_dev_open,
1081 .dev_close = hw_dev_close,
1082 .info_get = hw_info_get,
1083 .dev_config_set = hw_dev_config_set,
1084 .dev_acquisition_start = hw_dev_acquisition_start,
1085 .dev_acquisition_stop = hw_dev_acquisition_stop,