2 * This file is part of the libsigrok project.
4 * Copyright (C) 2013 Marc Schink <sigrok-dev@marcschink.de>
6 * This program is free software: you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation, either version 3 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program. If not, see <http://www.gnu.org/licenses/>.
20 #ifndef LIBSIGROK_HARDWARE_IKALOGIC_SCANALOGIC2_PROTOCOL_H
21 #define LIBSIGROK_HARDWARE_IKALOGIC_SCANALOGIC2_PROTOCOL_H
27 #include "libsigrok.h"
28 #include "libsigrok-internal.h"
30 #define LOG_PREFIX "ikalogic-scanalogic2"
32 #define VENDOR_NAME "IKALOGIC"
33 #define MODEL_NAME "Scanalogic-2"
35 #define USB_VID_PID "20a0.4123"
36 #define USB_INTERFACE 0
37 #define USB_TIMEOUT 5000
39 #define USB_REQUEST_TYPE_IN (LIBUSB_REQUEST_TYPE_CLASS | \
40 LIBUSB_RECIPIENT_INTERFACE | LIBUSB_ENDPOINT_IN)
42 #define USB_REQUEST_TYPE_OUT (LIBUSB_REQUEST_TYPE_CLASS | \
43 LIBUSB_RECIPIENT_INTERFACE | LIBUSB_ENDPOINT_OUT)
45 #define USB_HID_GET_REPORT 0x01
46 #define USB_HID_SET_REPORT 0x09
47 #define USB_HID_REPORT_TYPE_FEATURE 0x300
49 #define NUM_SAMPLERATES 11
52 #define TRIGGER_TYPES "rfc"
55 * Number of sample bytes and samples the device can acquire. Note that the
56 * vendor software can acquire 32736 sample bytes only but the device is capable
57 * to acquire up to 32766 sample bytes.
59 #define MAX_DEV_SAMPLE_BYTES 32766
60 #define MAX_DEV_SAMPLES (MAX_INT_SAMPLE_BYTES * 8)
62 /* Number of sample bytes and samples the driver can acquire. */
63 #define MAX_SAMPLE_BYTES (MAX_DEV_SAMPLE_BYTES - 1)
64 #define MAX_SAMPLES (MAX_SAMPLE_BYTES * 8)
66 /* Maximum time that the trigger can be delayed in milliseconds. */
67 #define MAX_AFTER_TRIGGER_DELAY 65000
69 #define PACKET_LENGTH 128
71 /* Number of sample bytes per packet where a sample byte contains 8 samples. */
72 #define PACKET_NUM_SAMPLE_BYTES 124
74 /* Number of samples per packet. */
75 #define PACKET_NUM_SAMPLES (PACKET_NUM_SAMPLE_BYTES * 8)
77 #define DEFAULT_SAMPLERATE SR_KHZ(1.25)
80 * Time interval between the last status of available data received and the
81 * moment when the next status request will be sent in microseconds.
83 #define WAIT_DATA_READY_INTERVAL 1500000
85 #define CMD_SAMPLE 0x01
86 #define CMD_RESET 0x02
90 #define TRIGGER_CHANNEL_ALL 0x00
91 #define TRIGGER_CHANNEL_0 0x01
92 #define TRIGGER_CHANNEL_1 0x02
93 #define TRIGGER_CHANNEL_2 0x03
95 #define TRIGGER_TYPE_NEGEDGE 0x00
96 #define TRIGGER_TYPE_POSEDGE 0x01
97 #define TRIGGER_TYPE_ANYEDGE 0x02
98 #define TRIGGER_TYPE_NONE 0x03
100 #define STATUS_DATA_READY 0x60
101 #define STATUS_WAITING_FOR_TRIGGER 0x61
102 #define STATUS_SAMPLING 0x62
103 #define STATUS_DEVICE_READY 0x63
106 /* Serial number of the device. */
109 /* Major version of the firmware. */
110 uint8_t fw_ver_major;
112 /* Minor version of the firmware. */
113 uint8_t fw_ver_minor;
119 STATE_WAIT_DATA_READY,
121 STATE_RESET_AND_IDLE,
122 STATE_WAIT_DEVICE_READY
125 /** Private, per-device-instance driver context. */
127 /* Current selected samplerate. */
130 /* Device specific identifier for the current samplerate. */
131 uint8_t samplerate_id;
133 /* Current sampling limit. */
134 uint64_t limit_samples;
136 /* Calculated number of pre-trigger samples. */
137 uint64_t pre_trigger_samples;
139 /* Number of pre- and post-trigger sample bytes to acquire. */
140 uint16_t pre_trigger_bytes;
141 uint16_t post_trigger_bytes;
143 /* Device specific settings for the trigger. */
144 uint8_t trigger_channel;
145 uint8_t trigger_type;
147 unsigned int capture_ratio;
149 /* Time that the trigger will be delayed in milliseconds. */
150 uint16_t after_trigger_delay;
154 /* Array to provide an index based access to all probes. */
155 const struct sr_probe *probes[NUM_PROBES];
157 struct libusb_transfer *xfer_in, *xfer_out;
160 * Buffer to store setup and payload data for incoming and outgoing
163 uint8_t xfer_buf_in[LIBUSB_CONTROL_SETUP_SIZE + PACKET_LENGTH];
164 uint8_t xfer_buf_out[LIBUSB_CONTROL_SETUP_SIZE + PACKET_LENGTH];
166 /* Pointers to the payload of incoming and outgoing transfers. */
167 uint8_t *xfer_data_in, *xfer_data_out;
169 /* Current state of the state machine */
172 /* Next state of the state machine. */
173 unsigned int next_state;
176 * Locking variable to ensure that no status about available data will
177 * be requested until the last status was received.
179 gboolean wait_data_ready_locked;
182 * Time when the last response about the status of available data was
185 int64_t wait_data_ready_time;
188 * Indicates that stopping of the acquisition is currently in progress.
190 gboolean stopping_in_progress;
193 * Buffer which contains the samples received from the device for each
194 * channel except the last one. The samples of the last channel will be
195 * processed directly after they will be received.
197 uint8_t sample_buffer[NUM_PROBES - 1][MAX_DEV_SAMPLE_BYTES];
199 /* Expected number of sample packets for each channel. */
200 uint16_t num_sample_packets;
202 /* Number of samples already processed. */
203 uint64_t samples_processed;
205 /* Sample packet number that is currently processed. */
206 uint16_t sample_packet;
208 /* Channel number that is currently processed. */
211 /* Number of enabled probes. */
212 unsigned int num_enabled_probes;
214 /* Array to provide a sequential access to all enabled probe indices. */
215 uint8_t probe_map[NUM_PROBES];
217 /* Indicates whether a transfer failed. */
218 gboolean transfer_error;
221 SR_PRIV int ikalogic_scanalogic2_receive_data(int fd, int revents, void *cb_data);
222 SR_PRIV void sl2_receive_transfer_in(struct libusb_transfer *transfer);
223 SR_PRIV void sl2_receive_transfer_out(struct libusb_transfer *transfer);
224 SR_PRIV int sl2_set_samplerate(const struct sr_dev_inst *sdi,
225 uint64_t samplerate);
226 SR_PRIV int sl2_set_limit_samples(const struct sr_dev_inst *sdi,
227 uint64_t limit_samples);
228 SR_PRIV void sl2_configure_trigger(const struct sr_dev_inst *sdi);
229 SR_PRIV int sl2_set_capture_ratio(const struct sr_dev_inst *sdi,
230 uint64_t capture_ratio);
231 SR_PRIV int sl2_set_after_trigger_delay(const struct sr_dev_inst *sdi,
232 uint64_t after_trigger_delay);
233 SR_PRIV void sl2_calculate_trigger_samples(const struct sr_dev_inst *sdi);
234 SR_PRIV int sl2_get_device_info(struct sr_usb_dev_inst usb,
235 struct device_info *dev_info);
236 SR_PRIV int sl2_transfer_in(libusb_device_handle *dev_handle, uint8_t *data);
237 SR_PRIV int sl2_transfer_out(libusb_device_handle *dev_handle, uint8_t *data);