2 * This file is part of the sigrok project.
4 * Copyright (C) 2010-2012 Bert Vermeulen <bert@biot.com>
5 * Copyright (C) 2012 Joel Holdsworth <joel@airwebreathe.org.uk>
7 * This program is free software: you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation, either version 3 of the License, or
10 * (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program. If not, see <http://www.gnu.org/licenses/>.
26 #include "libsigrok.h"
27 #include "libsigrok-internal.h"
31 static const struct fx2lafw_profile supported_fx2[] = {
34 * EE Electronics ESLA201A
37 { 0x08a9, 0x0014, "CWAV", "USBee AX", NULL,
38 FIRMWARE_DIR "/fx2lafw-cwav-usbeeax.fw",
44 { 0x08a9, 0x0015, "CWAV", "USBee DX", NULL,
45 FIRMWARE_DIR "/fx2lafw-cwav-usbeedx.fw",
51 { 0x08a9, 0x0009, "CWAV", "USBee SX", NULL,
52 FIRMWARE_DIR "/fx2lafw-cwav-usbeesx.fw",
57 * EE Electronics ESLA100
59 * Robomotic BugLogic 3
61 { 0x0925, 0x3881, "Saleae", "Logic", NULL,
62 FIRMWARE_DIR "/fx2lafw-saleae-logic.fw",
66 * Default Cypress FX2 without EEPROM, e.g.:
68 * Braintechnology USB Interface V2.x
70 { 0x04B4, 0x8613, "Cypress", "FX2", NULL,
71 FIRMWARE_DIR "/fx2lafw-cypress-fx2.fw",
75 * Braintechnology USB-LPS
77 { 0x16d0, 0x0498, "Braintechnology", "USB-LPS", NULL,
78 FIRMWARE_DIR "/fx2lafw-braintechnology-usb-lps.fw",
81 { 0, 0, 0, 0, 0, 0, 0 }
84 static const int hwcaps[] = {
85 SR_CONF_LOGIC_ANALYZER,
88 /* These are really implemented in the driver, not the hardware. */
89 SR_CONF_LIMIT_SAMPLES,
94 static const char *probe_names[] = {
95 "0", "1", "2", "3", "4", "5", "6", "7",
96 "8", "9", "10", "11", "12", "13", "14", "15",
100 static const uint64_t supported_samplerates[] = {
120 static const struct sr_samplerates samplerates = {
124 .list = supported_samplerates,
127 SR_PRIV struct sr_dev_driver fx2lafw_driver_info;
128 static struct sr_dev_driver *di = &fx2lafw_driver_info;
129 static int hw_dev_close(struct sr_dev_inst *sdi);
130 static int config_set(int id, const void *value, const struct sr_dev_inst *sdi);
131 static int hw_dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data);
134 * Check the USB configuration to determine if this is an fx2lafw device.
136 * @return TRUE if the device's configuration profile match fx2lafw
137 * configuration, FALSE otherwise.
139 static gboolean check_conf_profile(libusb_device *dev)
141 struct libusb_device_descriptor des;
142 struct libusb_device_handle *hdl;
144 unsigned char strdesc[64];
149 /* Assume the FW has not been loaded, unless proven wrong. */
150 if (libusb_get_device_descriptor(dev, &des) != 0)
153 if (libusb_open(dev, &hdl) != 0)
156 if (libusb_get_string_descriptor_ascii(hdl,
157 des.iManufacturer, strdesc, sizeof(strdesc)) < 0)
159 if (strncmp((const char *)strdesc, "sigrok", 6))
162 if (libusb_get_string_descriptor_ascii(hdl,
163 des.iProduct, strdesc, sizeof(strdesc)) < 0)
165 if (strncmp((const char *)strdesc, "fx2lafw", 7))
168 /* If we made it here, it must be an fx2lafw. */
177 static int fx2lafw_dev_open(struct sr_dev_inst *sdi)
179 libusb_device **devlist;
180 struct libusb_device_descriptor des;
181 struct dev_context *devc;
182 struct drv_context *drvc;
183 struct version_info vi;
184 int ret, skip, i, device_count;
190 if (sdi->status == SR_ST_ACTIVE)
191 /* Device is already in use. */
195 device_count = libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist);
196 if (device_count < 0) {
197 sr_err("Failed to get device list: %s.",
198 libusb_error_name(device_count));
202 for (i = 0; i < device_count; i++) {
203 if ((ret = libusb_get_device_descriptor(devlist[i], &des))) {
204 sr_err("Failed to get device descriptor: %s.",
205 libusb_error_name(ret));
209 if (des.idVendor != devc->profile->vid
210 || des.idProduct != devc->profile->pid)
213 if (sdi->status == SR_ST_INITIALIZING) {
214 if (skip != sdi->index) {
215 /* Skip devices of this type that aren't the one we want. */
219 } else if (sdi->status == SR_ST_INACTIVE) {
221 * This device is fully enumerated, so we need to find
222 * this device by vendor, product, bus and address.
224 if (libusb_get_bus_number(devlist[i]) != devc->usb->bus
225 || libusb_get_device_address(devlist[i]) != devc->usb->address)
226 /* This is not the one. */
230 if (!(ret = libusb_open(devlist[i], &devc->usb->devhdl))) {
231 if (devc->usb->address == 0xff)
233 * First time we touch this device after FW
234 * upload, so we don't know the address yet.
236 devc->usb->address = libusb_get_device_address(devlist[i]);
238 sr_err("Failed to open device: %s.",
239 libusb_error_name(ret));
243 ret = command_get_fw_version(devc->usb->devhdl, &vi);
245 sr_err("Failed to get firmware version.");
249 ret = command_get_revid_version(devc->usb->devhdl, &revid);
251 sr_err("Failed to get REVID.");
256 * Changes in major version mean incompatible/API changes, so
257 * bail out if we encounter an incompatible version.
258 * Different minor versions are OK, they should be compatible.
260 if (vi.major != FX2LAFW_REQUIRED_VERSION_MAJOR) {
261 sr_err("Expected firmware version %d.x, "
262 "got %d.%d.", FX2LAFW_REQUIRED_VERSION_MAJOR,
267 sdi->status = SR_ST_ACTIVE;
268 sr_info("Opened device %d on %d.%d, "
269 "interface %d, firmware %d.%d.",
270 sdi->index, devc->usb->bus, devc->usb->address,
271 USB_INTERFACE, vi.major, vi.minor);
273 sr_info("Detected REVID=%d, it's a Cypress CY7C68013%s.",
274 revid, (revid != 1) ? " (FX2)" : "A (FX2LP)");
278 libusb_free_device_list(devlist, 1);
280 if (sdi->status != SR_ST_ACTIVE)
286 static int configure_probes(const struct sr_dev_inst *sdi)
288 struct dev_context *devc;
289 struct sr_probe *probe;
291 int probe_bit, stage, i;
295 for (i = 0; i < NUM_TRIGGER_STAGES; i++) {
296 devc->trigger_mask[i] = 0;
297 devc->trigger_value[i] = 0;
301 for (l = sdi->probes; l; l = l->next) {
302 probe = (struct sr_probe *)l->data;
303 if (probe->enabled == FALSE)
306 if (probe->index > 7)
307 devc->sample_wide = TRUE;
309 probe_bit = 1 << (probe->index);
310 if (!(probe->trigger))
314 for (tc = probe->trigger; *tc; tc++) {
315 devc->trigger_mask[stage] |= probe_bit;
317 devc->trigger_value[stage] |= probe_bit;
319 if (stage > NUM_TRIGGER_STAGES)
326 * We didn't configure any triggers, make sure acquisition
327 * doesn't wait for any.
329 devc->trigger_stage = TRIGGER_FIRED;
331 devc->trigger_stage = 0;
336 static struct dev_context *fx2lafw_dev_new(void)
338 struct dev_context *devc;
340 if (!(devc = g_try_malloc0(sizeof(struct dev_context)))) {
341 sr_err("Device context malloc failed.");
345 devc->trigger_stage = TRIGGER_FIRED;
350 static int clear_instances(void)
353 struct sr_dev_inst *sdi;
354 struct drv_context *drvc;
355 struct dev_context *devc;
360 for (l = drvc->instances; l; l = l->next) {
361 if (!(sdi = l->data)) {
362 /* Log error, but continue cleaning up the rest. */
363 sr_err("sdi was NULL, continuing.");
367 if (!(devc = sdi->priv)) {
368 /* Log error, but continue cleaning up the rest. */
369 sr_err("sdi->priv was NULL, continuing.");
374 sr_usb_dev_inst_free(devc->usb);
376 sr_dev_inst_free(sdi);
379 g_slist_free(drvc->instances);
380 drvc->instances = NULL;
385 static int hw_init(struct sr_context *sr_ctx)
387 return std_hw_init(sr_ctx, di, DRIVER_LOG_DOMAIN);
390 static GSList *hw_scan(GSList *options)
393 struct libusb_device_descriptor des;
394 struct sr_dev_inst *sdi;
395 const struct fx2lafw_profile *prof;
396 struct drv_context *drvc;
397 struct dev_context *devc;
398 struct sr_probe *probe;
399 libusb_device **devlist;
400 int devcnt, num_logic_probes, ret, i, j;
406 /* This scan always invalidates any previous scans. */
409 /* Find all fx2lafw compatible devices and upload firmware to them. */
411 libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist);
412 for (i = 0; devlist[i]; i++) {
414 if ((ret = libusb_get_device_descriptor(
415 devlist[i], &des)) != 0) {
416 sr_warn("Failed to get device descriptor: %s.",
417 libusb_error_name(ret));
422 for (j = 0; supported_fx2[j].vid; j++) {
423 if (des.idVendor == supported_fx2[j].vid &&
424 des.idProduct == supported_fx2[j].pid) {
425 prof = &supported_fx2[j];
429 /* Skip if the device was not found. */
433 devcnt = g_slist_length(drvc->instances);
434 sdi = sr_dev_inst_new(devcnt, SR_ST_INITIALIZING,
435 prof->vendor, prof->model, prof->model_version);
440 /* Fill in probelist according to this device's profile. */
441 num_logic_probes = prof->dev_caps & DEV_CAPS_16BIT ? 16 : 8;
442 for (j = 0; j < num_logic_probes; j++) {
443 if (!(probe = sr_probe_new(j, SR_PROBE_LOGIC, TRUE,
446 sdi->probes = g_slist_append(sdi->probes, probe);
449 devc = fx2lafw_dev_new();
450 devc->profile = prof;
452 drvc->instances = g_slist_append(drvc->instances, sdi);
453 devices = g_slist_append(devices, sdi);
455 if (check_conf_profile(devlist[i])) {
456 /* Already has the firmware, so fix the new address. */
457 sr_dbg("Found an fx2lafw device.");
458 sdi->status = SR_ST_INACTIVE;
459 devc->usb = sr_usb_dev_inst_new
460 (libusb_get_bus_number(devlist[i]),
461 libusb_get_device_address(devlist[i]), NULL);
463 if (ezusb_upload_firmware(devlist[i], USB_CONFIGURATION,
464 prof->firmware) == SR_OK)
465 /* Store when this device's FW was updated. */
466 devc->fw_updated = g_get_monotonic_time();
468 sr_err("Firmware upload failed for "
469 "device %d.", devcnt);
470 devc->usb = sr_usb_dev_inst_new
471 (libusb_get_bus_number(devlist[i]), 0xff, NULL);
474 libusb_free_device_list(devlist, 1);
479 static GSList *hw_dev_list(void)
481 return ((struct drv_context *)(di->priv))->instances;
484 static int hw_dev_open(struct sr_dev_inst *sdi)
486 struct dev_context *devc;
488 int64_t timediff_us, timediff_ms;
493 * If the firmware was recently uploaded, wait up to MAX_RENUM_DELAY_MS
494 * milliseconds for the FX2 to renumerate.
497 if (devc->fw_updated > 0) {
498 sr_info("Waiting for device to reset.");
499 /* Takes >= 300ms for the FX2 to be gone from the USB bus. */
500 g_usleep(300 * 1000);
502 while (timediff_ms < MAX_RENUM_DELAY_MS) {
503 if ((ret = fx2lafw_dev_open(sdi)) == SR_OK)
505 g_usleep(100 * 1000);
507 timediff_us = g_get_monotonic_time() - devc->fw_updated;
508 timediff_ms = timediff_us / 1000;
509 sr_spew("Waited %" PRIi64 "ms.", timediff_ms);
512 sr_err("Device failed to renumerate.");
515 sr_info("Device came back after %" PRIi64 "ms.", timediff_ms);
517 sr_info("Firmware upload was not needed.");
518 ret = fx2lafw_dev_open(sdi);
522 sr_err("Unable to open device.");
528 ret = libusb_claim_interface(devc->usb->devhdl, USB_INTERFACE);
531 case LIBUSB_ERROR_BUSY:
532 sr_err("Unable to claim USB interface. Another "
533 "program or driver has already claimed it.");
535 case LIBUSB_ERROR_NO_DEVICE:
536 sr_err("Device has been disconnected.");
539 sr_err("Unable to claim interface: %s.",
540 libusb_error_name(ret));
547 if (devc->cur_samplerate == 0) {
548 /* Samplerate hasn't been set; default to the slowest one. */
549 if (config_set(SR_CONF_SAMPLERATE, &supported_samplerates[0],
557 static int hw_dev_close(struct sr_dev_inst *sdi)
559 struct dev_context *devc;
563 if (devc->usb->devhdl == NULL)
566 sr_info("Closing device %d on %d.%d, interface %d.",
567 sdi->index, devc->usb->bus, devc->usb->address, USB_INTERFACE);
568 libusb_release_interface(devc->usb->devhdl, USB_INTERFACE);
569 libusb_close(devc->usb->devhdl);
570 devc->usb->devhdl = NULL;
571 sdi->status = SR_ST_INACTIVE;
576 static int hw_cleanup(void)
578 struct drv_context *drvc;
581 if (!(drvc = di->priv))
584 ret = clear_instances();
592 static int config_get(int id, const void **data, const struct sr_dev_inst *sdi)
594 struct dev_context *devc;
597 case SR_CONF_SAMPLERATE:
600 *data = &devc->cur_samplerate;
611 static int config_set(int id, const void *value, const struct sr_dev_inst *sdi)
613 struct dev_context *devc;
618 if (id == SR_CONF_SAMPLERATE) {
619 devc->cur_samplerate = *(const uint64_t *)value;
621 } else if (id == SR_CONF_LIMIT_SAMPLES) {
622 devc->limit_samples = *(const uint64_t *)value;
631 static int config_list(int key, const void **data, const struct sr_dev_inst *sdi)
637 case SR_CONF_DEVICE_OPTIONS:
640 case SR_CONF_SAMPLERATE:
641 *data = &samplerates;
643 case SR_CONF_TRIGGER_TYPE:
644 *data = TRIGGER_TYPE;
653 static int receive_data(int fd, int revents, void *cb_data)
656 struct drv_context *drvc;
664 tv.tv_sec = tv.tv_usec = 0;
665 libusb_handle_events_timeout(drvc->sr_ctx->libusb_ctx, &tv);
670 static void abort_acquisition(struct dev_context *devc)
674 devc->num_samples = -1;
676 for (i = devc->num_transfers - 1; i >= 0; i--) {
677 if (devc->transfers[i])
678 libusb_cancel_transfer(devc->transfers[i]);
682 static void finish_acquisition(struct dev_context *devc)
684 struct sr_datafeed_packet packet;
685 struct drv_context *drvc = di->priv;
686 const struct libusb_pollfd **lupfd;
689 /* Terminate session. */
690 packet.type = SR_DF_END;
691 sr_session_send(devc->cb_data, &packet);
693 /* Remove fds from polling. */
694 lupfd = libusb_get_pollfds(drvc->sr_ctx->libusb_ctx);
695 for (i = 0; lupfd[i]; i++)
696 sr_source_remove(lupfd[i]->fd);
697 free(lupfd); /* NOT g_free()! */
699 devc->num_transfers = 0;
700 g_free(devc->transfers);
703 static void free_transfer(struct libusb_transfer *transfer)
705 struct dev_context *devc;
708 devc = transfer->user_data;
710 g_free(transfer->buffer);
711 transfer->buffer = NULL;
712 libusb_free_transfer(transfer);
714 for (i = 0; i < devc->num_transfers; i++) {
715 if (devc->transfers[i] == transfer) {
716 devc->transfers[i] = NULL;
721 devc->submitted_transfers--;
722 if (devc->submitted_transfers == 0)
723 finish_acquisition(devc);
726 static void resubmit_transfer(struct libusb_transfer *transfer)
730 if ((ret = libusb_submit_transfer(transfer)) == LIBUSB_SUCCESS)
733 free_transfer(transfer);
734 /* TODO: Stop session? */
736 sr_err("%s: %s", __func__, libusb_error_name(ret));
739 static void receive_transfer(struct libusb_transfer *transfer)
741 gboolean packet_has_error = FALSE;
742 struct sr_datafeed_packet packet;
743 struct sr_datafeed_logic logic;
744 struct dev_context *devc;
745 int trigger_offset, i, sample_width, cur_sample_count;
746 int trigger_offset_bytes;
749 devc = transfer->user_data;
752 * If acquisition has already ended, just free any queued up
753 * transfer that come in.
755 if (devc->num_samples == -1) {
756 free_transfer(transfer);
760 sr_info("receive_transfer(): status %d received %d bytes.",
761 transfer->status, transfer->actual_length);
763 /* Save incoming transfer before reusing the transfer struct. */
764 cur_buf = transfer->buffer;
765 sample_width = devc->sample_wide ? 2 : 1;
766 cur_sample_count = transfer->actual_length / sample_width;
768 switch (transfer->status) {
769 case LIBUSB_TRANSFER_NO_DEVICE:
770 abort_acquisition(devc);
771 free_transfer(transfer);
773 case LIBUSB_TRANSFER_COMPLETED:
774 case LIBUSB_TRANSFER_TIMED_OUT: /* We may have received some data though. */
777 packet_has_error = TRUE;
781 if (transfer->actual_length == 0 || packet_has_error) {
782 devc->empty_transfer_count++;
783 if (devc->empty_transfer_count > MAX_EMPTY_TRANSFERS) {
785 * The FX2 gave up. End the acquisition, the frontend
786 * will work out that the samplecount is short.
788 abort_acquisition(devc);
789 free_transfer(transfer);
791 resubmit_transfer(transfer);
795 devc->empty_transfer_count = 0;
799 if (devc->trigger_stage >= 0) {
800 for (i = 0; i < cur_sample_count; i++) {
802 const uint16_t cur_sample = devc->sample_wide ?
803 *((const uint16_t*)cur_buf + i) :
804 *((const uint8_t*)cur_buf + i);
806 if ((cur_sample & devc->trigger_mask[devc->trigger_stage]) ==
807 devc->trigger_value[devc->trigger_stage]) {
808 /* Match on this trigger stage. */
809 devc->trigger_buffer[devc->trigger_stage] = cur_sample;
810 devc->trigger_stage++;
812 if (devc->trigger_stage == NUM_TRIGGER_STAGES ||
813 devc->trigger_mask[devc->trigger_stage] == 0) {
814 /* Match on all trigger stages, we're done. */
815 trigger_offset = i + 1;
818 * TODO: Send pre-trigger buffer to session bus.
819 * Tell the frontend we hit the trigger here.
821 packet.type = SR_DF_TRIGGER;
822 packet.payload = NULL;
823 sr_session_send(devc->cb_data, &packet);
826 * Send the samples that triggered it,
827 * since we're skipping past them.
829 packet.type = SR_DF_LOGIC;
830 packet.payload = &logic;
831 logic.unitsize = sizeof(*devc->trigger_buffer);
832 logic.length = devc->trigger_stage * logic.unitsize;
833 logic.data = devc->trigger_buffer;
834 sr_session_send(devc->cb_data, &packet);
836 devc->trigger_stage = TRIGGER_FIRED;
839 } else if (devc->trigger_stage > 0) {
841 * We had a match before, but not in the next sample. However, we may
842 * have a match on this stage in the next bit -- trigger on 0001 will
843 * fail on seeing 00001, so we need to go back to stage 0 -- but at
844 * the next sample from the one that matched originally, which the
845 * counter increment at the end of the loop takes care of.
847 i -= devc->trigger_stage;
849 i = -1; /* Oops, went back past this buffer. */
850 /* Reset trigger stage. */
851 devc->trigger_stage = 0;
856 if (devc->trigger_stage == TRIGGER_FIRED) {
857 /* Send the incoming transfer to the session bus. */
858 trigger_offset_bytes = trigger_offset * sample_width;
859 packet.type = SR_DF_LOGIC;
860 packet.payload = &logic;
861 logic.length = transfer->actual_length - trigger_offset_bytes;
862 logic.unitsize = sample_width;
863 logic.data = cur_buf + trigger_offset_bytes;
864 sr_session_send(devc->cb_data, &packet);
866 devc->num_samples += cur_sample_count;
867 if (devc->limit_samples &&
868 (unsigned int)devc->num_samples > devc->limit_samples) {
869 abort_acquisition(devc);
870 free_transfer(transfer);
875 * TODO: Buffer pre-trigger data in capture
876 * ratio-sized buffer.
880 resubmit_transfer(transfer);
883 static unsigned int to_bytes_per_ms(unsigned int samplerate)
885 return samplerate / 1000;
888 static size_t get_buffer_size(struct dev_context *devc)
893 * The buffer should be large enough to hold 10ms of data and
896 s = 10 * to_bytes_per_ms(devc->cur_samplerate);
897 return (s + 511) & ~511;
900 static unsigned int get_number_of_transfers(struct dev_context *devc)
904 /* Total buffer size should be able to hold about 500ms of data. */
905 n = 500 * to_bytes_per_ms(devc->cur_samplerate) / get_buffer_size(devc);
907 if (n > NUM_SIMUL_TRANSFERS)
908 return NUM_SIMUL_TRANSFERS;
913 static unsigned int get_timeout(struct dev_context *devc)
916 unsigned int timeout;
918 total_size = get_buffer_size(devc) * get_number_of_transfers(devc);
919 timeout = total_size / to_bytes_per_ms(devc->cur_samplerate);
920 return timeout + timeout / 4; /* Leave a headroom of 25% percent. */
923 static int hw_dev_acquisition_start(const struct sr_dev_inst *sdi,
926 struct dev_context *devc;
927 struct drv_context *drvc;
928 struct libusb_transfer *transfer;
929 const struct libusb_pollfd **lupfd;
930 unsigned int i, timeout, num_transfers;
938 if (devc->submitted_transfers != 0)
941 if (configure_probes(sdi) != SR_OK) {
942 sr_err("Failed to configure probes.");
946 devc->cb_data = cb_data;
947 devc->num_samples = 0;
948 devc->empty_transfer_count = 0;
950 timeout = get_timeout(devc);
951 num_transfers = get_number_of_transfers(devc);
952 size = get_buffer_size(devc);
954 devc->transfers = g_try_malloc0(sizeof(*devc->transfers) * num_transfers);
955 if (!devc->transfers) {
956 sr_err("USB transfers malloc failed.");
957 return SR_ERR_MALLOC;
960 devc->num_transfers = num_transfers;
962 for (i = 0; i < num_transfers; i++) {
963 if (!(buf = g_try_malloc(size))) {
964 sr_err("USB transfer buffer malloc failed.");
965 return SR_ERR_MALLOC;
967 transfer = libusb_alloc_transfer(0);
968 libusb_fill_bulk_transfer(transfer, devc->usb->devhdl,
969 2 | LIBUSB_ENDPOINT_IN, buf, size,
970 receive_transfer, devc, timeout);
971 if ((ret = libusb_submit_transfer(transfer)) != 0) {
972 sr_err("Failed to submit transfer: %s.",
973 libusb_error_name(ret));
974 libusb_free_transfer(transfer);
976 abort_acquisition(devc);
979 devc->transfers[i] = transfer;
980 devc->submitted_transfers++;
983 lupfd = libusb_get_pollfds(drvc->sr_ctx->libusb_ctx);
984 for (i = 0; lupfd[i]; i++)
985 sr_source_add(lupfd[i]->fd, lupfd[i]->events,
986 timeout, receive_data, NULL);
987 free(lupfd); /* NOT g_free()! */
989 /* Send header packet to the session bus. */
990 std_session_send_df_header(cb_data, DRIVER_LOG_DOMAIN);
992 if ((ret = command_start_acquisition(devc->usb->devhdl,
993 devc->cur_samplerate, devc->sample_wide)) != SR_OK) {
994 abort_acquisition(devc);
1001 /* TODO: This stops acquisition on ALL devices, ignoring dev_index. */
1002 static int hw_dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data)
1006 abort_acquisition(sdi->priv);
1011 SR_PRIV struct sr_dev_driver fx2lafw_driver_info = {
1013 .longname = "fx2lafw (generic driver for FX2 based LAs)",
1016 .cleanup = hw_cleanup,
1018 .dev_list = hw_dev_list,
1019 .dev_clear = clear_instances,
1020 .config_get = config_get,
1021 .config_set = config_set,
1022 .config_list = config_list,
1023 .dev_open = hw_dev_open,
1024 .dev_close = hw_dev_close,
1025 .dev_acquisition_start = hw_dev_acquisition_start,
1026 .dev_acquisition_stop = hw_dev_acquisition_stop,