1 -------------------------------------------------------------------------------
3 -------------------------------------------------------------------------------
5 This is a set of example captures of a DCF77 signal. The hardware used for
6 receiving the signal is a Pollin DCF1 module (3.3V supply). The Pollin
7 order number for the module is 810 054.
9 The dumps were made January 9, 2012 in the evening/night.
10 Only the dcf77_480s_pon_interrupted.sr dump was made January 10, 2012 in
14 http://en.wikipedia.org/wiki/DCF77
15 http://www.pollin.de/shop/dt/NTQ5OTgxOTk-/Bausaetze_Module/Module/DCF_Empfangsmodul_DCF1.html
16 http://www.pollin.de/shop/downloads/D810054D.PDF
22 The logic analyzer used for capturing was a Saleae Logic.
24 The logic analyzer probes were connected like this:
27 ------------------------
35 The sigrok command line used was:
37 sigrok-cli -d 0:samplerate=1mhz --time 1800s \
38 -p '1=PON,2=DATA' -o dcf77_1800s.sr
40 The time and samplerate varies, depending on the file.
42 The dcf77_480s_interrupted.sr file contains a dump where the power was removed
43 from the module one or more times during the capture.
45 The dcf77_480s_pon_interrupted.sr file contains a dump where the PON pin was
46 set from low to high (PON = high means that the device is disabled) for a
47 few seconds, then back to low.