]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2010-2012 Bert Vermeulen <bert@biot.com> | |
5 | * | |
6 | * This program is free software: you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation, either version 3 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
18 | */ | |
19 | ||
20 | #include "protocol.h" | |
21 | ||
22 | #define VENDOR_NAME "ZEROPLUS" | |
23 | #define USB_INTERFACE 0 | |
24 | #define USB_CONFIGURATION 1 | |
25 | #define NUM_TRIGGER_STAGES 4 | |
26 | #define PACKET_SIZE 2048 /* ?? */ | |
27 | ||
28 | //#define ZP_EXPERIMENTAL | |
29 | ||
30 | struct zp_model { | |
31 | uint16_t vid; | |
32 | uint16_t pid; | |
33 | char *model_name; | |
34 | unsigned int channels; | |
35 | unsigned int sample_depth; /* In Ksamples/channel */ | |
36 | unsigned int max_sampling_freq; | |
37 | }; | |
38 | ||
39 | /* | |
40 | * Note -- 16032, 16064 and 16128 *usually* -- but not always -- have the | |
41 | * same 128K sample depth. | |
42 | */ | |
43 | static const struct zp_model zeroplus_models[] = { | |
44 | {0x0c12, 0x7002, "LAP-16128U", 16, 128, 200}, | |
45 | {0x0c12, 0x7009, "LAP-C(16064)", 16, 64, 100}, | |
46 | {0x0c12, 0x700a, "LAP-C(16128)", 16, 128, 200}, | |
47 | {0x0c12, 0x700b, "LAP-C(32128)", 32, 128, 200}, | |
48 | {0x0c12, 0x700c, "LAP-C(321000)", 32, 1024, 200}, | |
49 | {0x0c12, 0x700d, "LAP-C(322000)", 32, 2048, 200}, | |
50 | {0x0c12, 0x700e, "LAP-C(16032)", 16, 32, 100}, | |
51 | {0x0c12, 0x7016, "LAP-C(162000)", 16, 2048, 200}, | |
52 | {0x0c12, 0x7100, "AKIP-9101", 16, 256, 200}, | |
53 | { 0, 0, 0, 0, 0, 0 } | |
54 | }; | |
55 | ||
56 | static const uint32_t devopts[] = { | |
57 | SR_CONF_LOGIC_ANALYZER, | |
58 | SR_CONF_LIMIT_SAMPLES | SR_CONF_SET | SR_CONF_LIST, | |
59 | SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
60 | SR_CONF_TRIGGER_MATCH | SR_CONF_LIST, | |
61 | SR_CONF_CAPTURE_RATIO | SR_CONF_GET | SR_CONF_SET, | |
62 | SR_CONF_VOLTAGE_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
63 | }; | |
64 | ||
65 | static const int32_t trigger_matches[] = { | |
66 | SR_TRIGGER_ZERO, | |
67 | SR_TRIGGER_ONE, | |
68 | }; | |
69 | ||
70 | /* | |
71 | * ZEROPLUS LAP-C (16032) numbers the 16 channels A0-A7 and B0-B7. | |
72 | * We currently ignore other untested/unsupported devices here. | |
73 | */ | |
74 | static const char *channel_names[] = { | |
75 | "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", | |
76 | "B0", "B1", "B2", "B3", "B4", "B5", "B6", "B7", | |
77 | "C0", "C1", "C2", "C3", "C4", "C5", "C6", "C7", | |
78 | "D0", "D1", "D2", "D3", "D4", "D5", "D6", "D7", | |
79 | NULL, | |
80 | }; | |
81 | ||
82 | SR_PRIV struct sr_dev_driver zeroplus_logic_cube_driver_info; | |
83 | static struct sr_dev_driver *di = &zeroplus_logic_cube_driver_info; | |
84 | ||
85 | /* | |
86 | * The hardware supports more samplerates than these, but these are the | |
87 | * options hardcoded into the vendor's Windows GUI. | |
88 | */ | |
89 | ||
90 | static const uint64_t samplerates_100[] = { | |
91 | SR_HZ(100), | |
92 | SR_HZ(500), | |
93 | SR_KHZ(1), | |
94 | SR_KHZ(5), | |
95 | SR_KHZ(25), | |
96 | SR_KHZ(50), | |
97 | SR_KHZ(100), | |
98 | SR_KHZ(200), | |
99 | SR_KHZ(400), | |
100 | SR_KHZ(800), | |
101 | SR_MHZ(1), | |
102 | SR_MHZ(10), | |
103 | SR_MHZ(25), | |
104 | SR_MHZ(50), | |
105 | SR_MHZ(80), | |
106 | SR_MHZ(100), | |
107 | }; | |
108 | ||
109 | const uint64_t samplerates_200[] = { | |
110 | SR_HZ(100), | |
111 | SR_HZ(500), | |
112 | SR_KHZ(1), | |
113 | SR_KHZ(5), | |
114 | SR_KHZ(25), | |
115 | SR_KHZ(50), | |
116 | SR_KHZ(100), | |
117 | SR_KHZ(200), | |
118 | SR_KHZ(400), | |
119 | SR_KHZ(800), | |
120 | SR_MHZ(1), | |
121 | SR_MHZ(10), | |
122 | SR_MHZ(25), | |
123 | SR_MHZ(50), | |
124 | SR_MHZ(80), | |
125 | SR_MHZ(100), | |
126 | SR_MHZ(150), | |
127 | SR_MHZ(200), | |
128 | }; | |
129 | ||
130 | static int dev_close(struct sr_dev_inst *sdi); | |
131 | ||
132 | SR_PRIV int zp_set_samplerate(struct dev_context *devc, uint64_t samplerate) | |
133 | { | |
134 | int i; | |
135 | ||
136 | for (i = 0; ARRAY_SIZE(samplerates_200); i++) | |
137 | if (samplerate == samplerates_200[i]) | |
138 | break; | |
139 | ||
140 | if (i == ARRAY_SIZE(samplerates_200) || samplerate > devc->max_samplerate) { | |
141 | sr_err("Unsupported samplerate: %" PRIu64 "Hz.", samplerate); | |
142 | return SR_ERR_ARG; | |
143 | } | |
144 | ||
145 | sr_info("Setting samplerate to %" PRIu64 "Hz.", samplerate); | |
146 | ||
147 | if (samplerate >= SR_MHZ(1)) | |
148 | analyzer_set_freq(samplerate / SR_MHZ(1), FREQ_SCALE_MHZ); | |
149 | else if (samplerate >= SR_KHZ(1)) | |
150 | analyzer_set_freq(samplerate / SR_KHZ(1), FREQ_SCALE_KHZ); | |
151 | else | |
152 | analyzer_set_freq(samplerate, FREQ_SCALE_HZ); | |
153 | ||
154 | devc->cur_samplerate = samplerate; | |
155 | ||
156 | return SR_OK; | |
157 | } | |
158 | ||
159 | static int init(struct sr_context *sr_ctx) | |
160 | { | |
161 | return std_init(sr_ctx, di, LOG_PREFIX); | |
162 | } | |
163 | ||
164 | static GSList *scan(GSList *options) | |
165 | { | |
166 | struct sr_dev_inst *sdi; | |
167 | struct sr_channel *ch; | |
168 | struct drv_context *drvc; | |
169 | struct dev_context *devc; | |
170 | const struct zp_model *prof; | |
171 | struct libusb_device_descriptor des; | |
172 | struct libusb_device_handle *hdl; | |
173 | libusb_device **devlist; | |
174 | GSList *devices; | |
175 | int ret, i, j; | |
176 | char serial_num[64], connection_id[64]; | |
177 | ||
178 | (void)options; | |
179 | ||
180 | drvc = di->priv; | |
181 | ||
182 | devices = NULL; | |
183 | ||
184 | /* Find all ZEROPLUS analyzers and add them to device list. */ | |
185 | libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist); /* TODO: Errors. */ | |
186 | ||
187 | for (i = 0; devlist[i]; i++) { | |
188 | ret = libusb_get_device_descriptor(devlist[i], &des); | |
189 | if (ret != 0) { | |
190 | sr_err("Failed to get device descriptor: %s.", | |
191 | libusb_error_name(ret)); | |
192 | continue; | |
193 | } | |
194 | ||
195 | if ((ret = libusb_open(devlist[i], &hdl)) < 0) | |
196 | continue; | |
197 | ||
198 | if (des.iSerialNumber == 0) { | |
199 | serial_num[0] = '\0'; | |
200 | } else if ((ret = libusb_get_string_descriptor_ascii(hdl, | |
201 | des.iSerialNumber, (unsigned char *) serial_num, | |
202 | sizeof(serial_num))) < 0) { | |
203 | sr_warn("Failed to get serial number string descriptor: %s.", | |
204 | libusb_error_name(ret)); | |
205 | continue; | |
206 | } | |
207 | ||
208 | libusb_close(hdl); | |
209 | ||
210 | usb_get_port_path(devlist[i], connection_id, sizeof(connection_id)); | |
211 | ||
212 | prof = NULL; | |
213 | for (j = 0; j < zeroplus_models[j].vid; j++) { | |
214 | if (des.idVendor == zeroplus_models[j].vid && | |
215 | des.idProduct == zeroplus_models[j].pid) { | |
216 | prof = &zeroplus_models[j]; | |
217 | } | |
218 | } | |
219 | /* Skip if the device was not found. */ | |
220 | if (!prof) | |
221 | continue; | |
222 | sr_info("Found ZEROPLUS %s.", prof->model_name); | |
223 | ||
224 | /* Register the device with libsigrok. */ | |
225 | sdi = sr_dev_inst_new(); | |
226 | sdi->status = SR_ST_INACTIVE; | |
227 | sdi->vendor = g_strdup(VENDOR_NAME); | |
228 | sdi->model = g_strdup(prof->model_name); | |
229 | sdi->driver = di; | |
230 | sdi->serial_num = g_strdup(serial_num); | |
231 | sdi->connection_id = g_strdup(connection_id); | |
232 | ||
233 | /* Allocate memory for our private driver context. */ | |
234 | if (!(devc = g_try_malloc0(sizeof(struct dev_context)))) { | |
235 | sr_err("Device context malloc failed."); | |
236 | return NULL; | |
237 | } | |
238 | ||
239 | sdi->priv = devc; | |
240 | devc->prof = prof; | |
241 | devc->num_channels = prof->channels; | |
242 | #ifdef ZP_EXPERIMENTAL | |
243 | devc->max_sample_depth = 128 * 1024; | |
244 | devc->max_samplerate = 200; | |
245 | #else | |
246 | devc->max_sample_depth = prof->sample_depth * 1024; | |
247 | devc->max_samplerate = prof->max_sampling_freq; | |
248 | #endif | |
249 | devc->max_samplerate *= SR_MHZ(1); | |
250 | devc->memory_size = MEMORY_SIZE_8K; | |
251 | // memset(devc->trigger_buffer, 0, NUM_TRIGGER_STAGES); | |
252 | ||
253 | /* Fill in channellist according to this device's profile. */ | |
254 | for (j = 0; j < devc->num_channels; j++) { | |
255 | if (!(ch = sr_channel_new(j, SR_CHANNEL_LOGIC, TRUE, | |
256 | channel_names[j]))) | |
257 | return NULL; | |
258 | sdi->channels = g_slist_append(sdi->channels, ch); | |
259 | } | |
260 | ||
261 | devices = g_slist_append(devices, sdi); | |
262 | drvc->instances = g_slist_append(drvc->instances, sdi); | |
263 | sdi->inst_type = SR_INST_USB; | |
264 | sdi->conn = sr_usb_dev_inst_new( | |
265 | libusb_get_bus_number(devlist[i]), | |
266 | libusb_get_device_address(devlist[i]), NULL); | |
267 | } | |
268 | libusb_free_device_list(devlist, 1); | |
269 | ||
270 | return devices; | |
271 | } | |
272 | ||
273 | static GSList *dev_list(void) | |
274 | { | |
275 | return ((struct drv_context *)(di->priv))->instances; | |
276 | } | |
277 | ||
278 | static int dev_open(struct sr_dev_inst *sdi) | |
279 | { | |
280 | struct dev_context *devc; | |
281 | struct drv_context *drvc; | |
282 | struct sr_usb_dev_inst *usb; | |
283 | libusb_device **devlist, *dev; | |
284 | int device_count, ret, i; | |
285 | char connection_id[64]; | |
286 | ||
287 | drvc = di->priv; | |
288 | usb = sdi->conn; | |
289 | ||
290 | if (!(devc = sdi->priv)) { | |
291 | sr_err("%s: sdi->priv was NULL", __func__); | |
292 | return SR_ERR_ARG; | |
293 | } | |
294 | ||
295 | device_count = libusb_get_device_list(drvc->sr_ctx->libusb_ctx, | |
296 | &devlist); | |
297 | if (device_count < 0) { | |
298 | sr_err("Failed to retrieve device list."); | |
299 | return SR_ERR; | |
300 | } | |
301 | ||
302 | dev = NULL; | |
303 | for (i = 0; i < device_count; i++) { | |
304 | usb_get_port_path(devlist[i], connection_id, sizeof(connection_id)); | |
305 | if (!strcmp(sdi->connection_id, connection_id)) { | |
306 | dev = devlist[i]; | |
307 | break; | |
308 | } | |
309 | } | |
310 | if (!dev) { | |
311 | sr_err("Device on %d.%d (logical) / %s (physical) disappeared!", | |
312 | usb->bus, usb->address, sdi->connection_id); | |
313 | return SR_ERR; | |
314 | } | |
315 | ||
316 | if (!(ret = libusb_open(dev, &(usb->devhdl)))) { | |
317 | sdi->status = SR_ST_ACTIVE; | |
318 | sr_info("Opened device on %d.%d (logical) / %s (physical) interface %d.", | |
319 | usb->bus, usb->address, sdi->connection_id, USB_INTERFACE); | |
320 | } else { | |
321 | sr_err("Failed to open device: %s.", libusb_error_name(ret)); | |
322 | return SR_ERR; | |
323 | } | |
324 | ||
325 | ret = libusb_set_configuration(usb->devhdl, USB_CONFIGURATION); | |
326 | if (ret < 0) { | |
327 | sr_err("Unable to set USB configuration %d: %s.", | |
328 | USB_CONFIGURATION, libusb_error_name(ret)); | |
329 | return SR_ERR; | |
330 | } | |
331 | ||
332 | ret = libusb_claim_interface(usb->devhdl, USB_INTERFACE); | |
333 | if (ret != 0) { | |
334 | sr_err("Unable to claim interface: %s.", | |
335 | libusb_error_name(ret)); | |
336 | return SR_ERR; | |
337 | } | |
338 | ||
339 | /* Set default configuration after power on. */ | |
340 | if (analyzer_read_status(usb->devhdl) == 0) | |
341 | analyzer_configure(usb->devhdl); | |
342 | ||
343 | analyzer_reset(usb->devhdl); | |
344 | analyzer_initialize(usb->devhdl); | |
345 | ||
346 | //analyzer_set_memory_size(MEMORY_SIZE_512K); | |
347 | // analyzer_set_freq(g_freq, g_freq_scale); | |
348 | analyzer_set_trigger_count(1); | |
349 | // analyzer_set_ramsize_trigger_address((((100 - g_pre_trigger) | |
350 | // * get_memory_size(g_memory_size)) / 100) >> 2); | |
351 | ||
352 | #if 0 | |
353 | if (g_double_mode == 1) | |
354 | analyzer_set_compression(COMPRESSION_DOUBLE); | |
355 | else if (g_compression == 1) | |
356 | analyzer_set_compression(COMPRESSION_ENABLE); | |
357 | else | |
358 | #endif | |
359 | analyzer_set_compression(COMPRESSION_NONE); | |
360 | ||
361 | if (devc->cur_samplerate == 0) { | |
362 | /* Samplerate hasn't been set. Default to 1MHz. */ | |
363 | analyzer_set_freq(1, FREQ_SCALE_MHZ); | |
364 | devc->cur_samplerate = SR_MHZ(1); | |
365 | } | |
366 | ||
367 | if (devc->cur_threshold == 0) | |
368 | set_voltage_threshold(devc, 1.5); | |
369 | ||
370 | return SR_OK; | |
371 | } | |
372 | ||
373 | static int dev_close(struct sr_dev_inst *sdi) | |
374 | { | |
375 | struct sr_usb_dev_inst *usb; | |
376 | ||
377 | usb = sdi->conn; | |
378 | ||
379 | if (!usb->devhdl) | |
380 | return SR_ERR; | |
381 | ||
382 | sr_info("Closing device on %d.%d (logical) / %s (physical) interface %d.", | |
383 | usb->bus, usb->address, sdi->connection_id, USB_INTERFACE); | |
384 | libusb_release_interface(usb->devhdl, USB_INTERFACE); | |
385 | libusb_reset_device(usb->devhdl); | |
386 | libusb_close(usb->devhdl); | |
387 | usb->devhdl = NULL; | |
388 | sdi->status = SR_ST_INACTIVE; | |
389 | ||
390 | return SR_OK; | |
391 | } | |
392 | ||
393 | static int cleanup(void) | |
394 | { | |
395 | return std_dev_clear(di, NULL); | |
396 | } | |
397 | ||
398 | static int config_get(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi, | |
399 | const struct sr_channel_group *cg) | |
400 | { | |
401 | struct dev_context *devc; | |
402 | ||
403 | (void)cg; | |
404 | ||
405 | switch (key) { | |
406 | case SR_CONF_SAMPLERATE: | |
407 | if (sdi) { | |
408 | devc = sdi->priv; | |
409 | *data = g_variant_new_uint64(devc->cur_samplerate); | |
410 | sr_spew("Returning samplerate: %" PRIu64 "Hz.", | |
411 | devc->cur_samplerate); | |
412 | } else | |
413 | return SR_ERR_ARG; | |
414 | break; | |
415 | case SR_CONF_CAPTURE_RATIO: | |
416 | if (sdi) { | |
417 | devc = sdi->priv; | |
418 | *data = g_variant_new_uint64(devc->capture_ratio); | |
419 | } else | |
420 | return SR_ERR_ARG; | |
421 | break; | |
422 | case SR_CONF_VOLTAGE_THRESHOLD: | |
423 | if (sdi) { | |
424 | GVariant *range[2]; | |
425 | devc = sdi->priv; | |
426 | range[0] = g_variant_new_double(devc->cur_threshold); | |
427 | range[1] = g_variant_new_double(devc->cur_threshold); | |
428 | *data = g_variant_new_tuple(range, 2); | |
429 | } else | |
430 | return SR_ERR_ARG; | |
431 | break; | |
432 | default: | |
433 | return SR_ERR_NA; | |
434 | } | |
435 | ||
436 | return SR_OK; | |
437 | } | |
438 | ||
439 | static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sdi, | |
440 | const struct sr_channel_group *cg) | |
441 | { | |
442 | struct dev_context *devc; | |
443 | gdouble low, high; | |
444 | ||
445 | (void)cg; | |
446 | ||
447 | if (sdi->status != SR_ST_ACTIVE) | |
448 | return SR_ERR_DEV_CLOSED; | |
449 | ||
450 | if (!(devc = sdi->priv)) { | |
451 | sr_err("%s: sdi->priv was NULL", __func__); | |
452 | return SR_ERR_ARG; | |
453 | } | |
454 | ||
455 | switch (key) { | |
456 | case SR_CONF_SAMPLERATE: | |
457 | return zp_set_samplerate(devc, g_variant_get_uint64(data)); | |
458 | case SR_CONF_LIMIT_SAMPLES: | |
459 | return set_limit_samples(devc, g_variant_get_uint64(data)); | |
460 | case SR_CONF_CAPTURE_RATIO: | |
461 | return set_capture_ratio(devc, g_variant_get_uint64(data)); | |
462 | case SR_CONF_VOLTAGE_THRESHOLD: | |
463 | g_variant_get(data, "(dd)", &low, &high); | |
464 | return set_voltage_threshold(devc, (low + high) / 2.0); | |
465 | default: | |
466 | return SR_ERR_NA; | |
467 | } | |
468 | ||
469 | return SR_OK; | |
470 | } | |
471 | ||
472 | static int config_list(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi, | |
473 | const struct sr_channel_group *cg) | |
474 | { | |
475 | struct dev_context *devc; | |
476 | GVariant *gvar, *grange[2]; | |
477 | GVariantBuilder gvb; | |
478 | double v; | |
479 | GVariant *range[2]; | |
480 | ||
481 | (void)cg; | |
482 | ||
483 | switch (key) { | |
484 | case SR_CONF_DEVICE_OPTIONS: | |
485 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, | |
486 | devopts, ARRAY_SIZE(devopts), sizeof(uint32_t)); | |
487 | break; | |
488 | case SR_CONF_SAMPLERATE: | |
489 | devc = sdi->priv; | |
490 | g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}")); | |
491 | if (devc->prof->max_sampling_freq == 100) { | |
492 | gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), | |
493 | samplerates_100, ARRAY_SIZE(samplerates_100), | |
494 | sizeof(uint64_t)); | |
495 | } else if (devc->prof->max_sampling_freq == 200) { | |
496 | gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), | |
497 | samplerates_200, ARRAY_SIZE(samplerates_200), | |
498 | sizeof(uint64_t)); | |
499 | } else { | |
500 | sr_err("Internal error: Unknown max. samplerate: %d.", | |
501 | devc->prof->max_sampling_freq); | |
502 | return SR_ERR_ARG; | |
503 | } | |
504 | g_variant_builder_add(&gvb, "{sv}", "samplerates", gvar); | |
505 | *data = g_variant_builder_end(&gvb); | |
506 | break; | |
507 | case SR_CONF_TRIGGER_MATCH: | |
508 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32, | |
509 | trigger_matches, ARRAY_SIZE(trigger_matches), | |
510 | sizeof(int32_t)); | |
511 | break; | |
512 | case SR_CONF_VOLTAGE_THRESHOLD: | |
513 | g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY); | |
514 | for (v = -6.0; v <= 6.0; v += 0.1) { | |
515 | range[0] = g_variant_new_double(v); | |
516 | range[1] = g_variant_new_double(v); | |
517 | gvar = g_variant_new_tuple(range, 2); | |
518 | g_variant_builder_add_value(&gvb, gvar); | |
519 | } | |
520 | *data = g_variant_builder_end(&gvb); | |
521 | break; | |
522 | case SR_CONF_LIMIT_SAMPLES: | |
523 | if (!sdi) | |
524 | return SR_ERR_ARG; | |
525 | devc = sdi->priv; | |
526 | grange[0] = g_variant_new_uint64(0); | |
527 | grange[1] = g_variant_new_uint64(devc->max_sample_depth); | |
528 | *data = g_variant_new_tuple(grange, 2); | |
529 | break; | |
530 | default: | |
531 | return SR_ERR_NA; | |
532 | } | |
533 | ||
534 | return SR_OK; | |
535 | } | |
536 | ||
537 | static int dev_acquisition_start(const struct sr_dev_inst *sdi, | |
538 | void *cb_data) | |
539 | { | |
540 | struct dev_context *devc; | |
541 | struct sr_usb_dev_inst *usb; | |
542 | struct sr_datafeed_packet packet; | |
543 | struct sr_datafeed_logic logic; | |
544 | unsigned int samples_read; | |
545 | int res; | |
546 | unsigned int packet_num, n; | |
547 | unsigned char *buf; | |
548 | unsigned int status; | |
549 | unsigned int stop_address; | |
550 | unsigned int now_address; | |
551 | unsigned int trigger_address; | |
552 | unsigned int trigger_offset; | |
553 | unsigned int triggerbar; | |
554 | unsigned int ramsize_trigger; | |
555 | unsigned int memory_size; | |
556 | unsigned int valid_samples; | |
557 | unsigned int discard; | |
558 | int trigger_now; | |
559 | ||
560 | if (sdi->status != SR_ST_ACTIVE) | |
561 | return SR_ERR_DEV_CLOSED; | |
562 | ||
563 | if (!(devc = sdi->priv)) { | |
564 | sr_err("%s: sdi->priv was NULL", __func__); | |
565 | return SR_ERR_ARG; | |
566 | } | |
567 | ||
568 | if (analyzer_add_triggers(sdi) != SR_OK) { | |
569 | sr_err("Failed to configure triggers."); | |
570 | return SR_ERR; | |
571 | } | |
572 | ||
573 | usb = sdi->conn; | |
574 | ||
575 | set_triggerbar(devc); | |
576 | ||
577 | /* Push configured settings to device. */ | |
578 | analyzer_configure(usb->devhdl); | |
579 | ||
580 | analyzer_start(usb->devhdl); | |
581 | sr_info("Waiting for data."); | |
582 | analyzer_wait_data(usb->devhdl); | |
583 | ||
584 | status = analyzer_read_status(usb->devhdl); | |
585 | stop_address = analyzer_get_stop_address(usb->devhdl); | |
586 | now_address = analyzer_get_now_address(usb->devhdl); | |
587 | trigger_address = analyzer_get_trigger_address(usb->devhdl); | |
588 | ||
589 | triggerbar = analyzer_get_triggerbar_address(); | |
590 | ramsize_trigger = analyzer_get_ramsize_trigger_address(); | |
591 | ||
592 | n = get_memory_size(devc->memory_size); | |
593 | memory_size = n / 4; | |
594 | ||
595 | sr_info("Status = 0x%x.", status); | |
596 | sr_info("Stop address = 0x%x.", stop_address); | |
597 | sr_info("Now address = 0x%x.", now_address); | |
598 | sr_info("Trigger address = 0x%x.", trigger_address); | |
599 | sr_info("Triggerbar address = 0x%x.", triggerbar); | |
600 | sr_info("Ramsize trigger = 0x%x.", ramsize_trigger); | |
601 | sr_info("Memory size = 0x%x.", memory_size); | |
602 | ||
603 | /* Send header packet to the session bus. */ | |
604 | std_session_send_df_header(cb_data, LOG_PREFIX); | |
605 | ||
606 | /* Check for empty capture */ | |
607 | if ((status & STATUS_READY) && !stop_address) { | |
608 | packet.type = SR_DF_END; | |
609 | sr_session_send(cb_data, &packet); | |
610 | return SR_OK; | |
611 | } | |
612 | ||
613 | if (!(buf = g_try_malloc(PACKET_SIZE))) { | |
614 | sr_err("Packet buffer malloc failed."); | |
615 | return SR_ERR_MALLOC; | |
616 | } | |
617 | ||
618 | /* Check if the trigger is in the samples we are throwing away */ | |
619 | trigger_now = now_address == trigger_address || | |
620 | ((now_address + 1) % memory_size) == trigger_address; | |
621 | ||
622 | /* | |
623 | * STATUS_READY doesn't clear until now_address advances past | |
624 | * addr 0, but for our logic, clear it in that case | |
625 | */ | |
626 | if (!now_address) | |
627 | status &= ~STATUS_READY; | |
628 | ||
629 | analyzer_read_start(usb->devhdl); | |
630 | ||
631 | /* Calculate how much data to discard */ | |
632 | discard = 0; | |
633 | if (status & STATUS_READY) { | |
634 | /* | |
635 | * We haven't wrapped around, we need to throw away data from | |
636 | * our current position to the end of the buffer. | |
637 | * Additionally, the first two samples captured are always | |
638 | * bogus. | |
639 | */ | |
640 | discard += memory_size - now_address + 2; | |
641 | now_address = 2; | |
642 | } | |
643 | ||
644 | /* If we have more samples than we need, discard them */ | |
645 | valid_samples = (stop_address - now_address) % memory_size; | |
646 | if (valid_samples > ramsize_trigger + triggerbar) { | |
647 | discard += valid_samples - (ramsize_trigger + triggerbar); | |
648 | now_address += valid_samples - (ramsize_trigger + triggerbar); | |
649 | } | |
650 | ||
651 | sr_info("Need to discard %d samples.", discard); | |
652 | ||
653 | /* Calculate how far in the trigger is */ | |
654 | if (trigger_now) | |
655 | trigger_offset = 0; | |
656 | else | |
657 | trigger_offset = (trigger_address - now_address) % memory_size; | |
658 | ||
659 | /* Recalculate the number of samples available */ | |
660 | valid_samples = (stop_address - now_address) % memory_size; | |
661 | ||
662 | /* Send the incoming transfer to the session bus. */ | |
663 | samples_read = 0; | |
664 | for (packet_num = 0; packet_num < n / PACKET_SIZE; packet_num++) { | |
665 | unsigned int len; | |
666 | unsigned int buf_offset; | |
667 | ||
668 | res = analyzer_read_data(usb->devhdl, buf, PACKET_SIZE); | |
669 | sr_info("Tried to read %d bytes, actually read %d bytes.", | |
670 | PACKET_SIZE, res); | |
671 | ||
672 | if (discard >= PACKET_SIZE / 4) { | |
673 | discard -= PACKET_SIZE / 4; | |
674 | continue; | |
675 | } | |
676 | ||
677 | len = PACKET_SIZE - discard * 4; | |
678 | buf_offset = discard * 4; | |
679 | discard = 0; | |
680 | ||
681 | /* Check if we've read all the samples */ | |
682 | if (samples_read + len / 4 >= valid_samples) | |
683 | len = (valid_samples - samples_read) * 4; | |
684 | if (!len) | |
685 | break; | |
686 | ||
687 | if (samples_read < trigger_offset && | |
688 | samples_read + len / 4 > trigger_offset) { | |
689 | /* Send out samples remaining before trigger */ | |
690 | packet.type = SR_DF_LOGIC; | |
691 | packet.payload = &logic; | |
692 | logic.length = (trigger_offset - samples_read) * 4; | |
693 | logic.unitsize = 4; | |
694 | logic.data = buf + buf_offset; | |
695 | sr_session_send(cb_data, &packet); | |
696 | len -= logic.length; | |
697 | samples_read += logic.length / 4; | |
698 | buf_offset += logic.length; | |
699 | } | |
700 | ||
701 | if (samples_read == trigger_offset) { | |
702 | /* Send out trigger */ | |
703 | packet.type = SR_DF_TRIGGER; | |
704 | packet.payload = NULL; | |
705 | sr_session_send(cb_data, &packet); | |
706 | } | |
707 | ||
708 | /* Send out data (or data after trigger) */ | |
709 | packet.type = SR_DF_LOGIC; | |
710 | packet.payload = &logic; | |
711 | logic.length = len; | |
712 | logic.unitsize = 4; | |
713 | logic.data = buf + buf_offset; | |
714 | sr_session_send(cb_data, &packet); | |
715 | samples_read += len / 4; | |
716 | } | |
717 | analyzer_read_stop(usb->devhdl); | |
718 | g_free(buf); | |
719 | ||
720 | packet.type = SR_DF_END; | |
721 | sr_session_send(cb_data, &packet); | |
722 | ||
723 | return SR_OK; | |
724 | } | |
725 | ||
726 | /* TODO: This stops acquisition on ALL devices, ignoring dev_index. */ | |
727 | static int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data) | |
728 | { | |
729 | struct dev_context *devc; | |
730 | struct sr_usb_dev_inst *usb; | |
731 | struct sr_datafeed_packet packet; | |
732 | ||
733 | packet.type = SR_DF_END; | |
734 | sr_session_send(cb_data, &packet); | |
735 | ||
736 | if (!(devc = sdi->priv)) { | |
737 | sr_err("%s: sdi->priv was NULL", __func__); | |
738 | return SR_ERR_BUG; | |
739 | } | |
740 | ||
741 | usb = sdi->conn; | |
742 | analyzer_reset(usb->devhdl); | |
743 | /* TODO: Need to cancel and free any queued up transfers. */ | |
744 | ||
745 | return SR_OK; | |
746 | } | |
747 | ||
748 | SR_PRIV struct sr_dev_driver zeroplus_logic_cube_driver_info = { | |
749 | .name = "zeroplus-logic-cube", | |
750 | .longname = "ZEROPLUS Logic Cube LAP-C series", | |
751 | .api_version = 1, | |
752 | .init = init, | |
753 | .cleanup = cleanup, | |
754 | .scan = scan, | |
755 | .dev_list = dev_list, | |
756 | .dev_clear = NULL, | |
757 | .config_get = config_get, | |
758 | .config_set = config_set, | |
759 | .config_list = config_list, | |
760 | .dev_open = dev_open, | |
761 | .dev_close = dev_close, | |
762 | .dev_acquisition_start = dev_acquisition_start, | |
763 | .dev_acquisition_stop = dev_acquisition_stop, | |
764 | .priv = NULL, | |
765 | }; |