]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2013 Bert Vermeulen <bert@biot.com> | |
5 | * | |
6 | * This program is free software: you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation, either version 3 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
18 | */ | |
19 | ||
20 | #include <config.h> | |
21 | #include "protocol.h" | |
22 | ||
23 | SR_PRIV int write_shortcommand(struct dev_context *devc, uint8_t command) | |
24 | { | |
25 | uint8_t buf[1]; | |
26 | int bytes_written; | |
27 | ||
28 | sr_dbg("Sending cmd 0x%.2x.", command); | |
29 | buf[0] = command; | |
30 | bytes_written = ftdi_write_data(devc->ftdic, buf, 1); | |
31 | if (bytes_written < 0) { | |
32 | sr_err("Failed to write FTDI data (%d): %s.", | |
33 | bytes_written, ftdi_get_error_string(devc->ftdic)); | |
34 | return SR_ERR; | |
35 | } else if (bytes_written != 1) { | |
36 | sr_err("FTDI write error, only %d/%d bytes written: %s.", | |
37 | bytes_written, 1, ftdi_get_error_string(devc->ftdic)); | |
38 | return SR_ERR; | |
39 | } | |
40 | ||
41 | return SR_OK; | |
42 | } | |
43 | ||
44 | SR_PRIV int write_longcommand(struct dev_context *devc, uint8_t command, uint8_t *data) | |
45 | { | |
46 | uint8_t buf[5]; | |
47 | int bytes_written; | |
48 | ||
49 | sr_dbg("Sending cmd 0x%.2x data 0x%.2x%.2x%.2x%.2x.", command, | |
50 | data[0], data[1], data[2], data[3]); | |
51 | buf[0] = command; | |
52 | buf[1] = data[0]; | |
53 | buf[2] = data[1]; | |
54 | buf[3] = data[2]; | |
55 | buf[4] = data[3]; | |
56 | bytes_written = ftdi_write_data(devc->ftdic, buf, 5); | |
57 | if (bytes_written < 0) { | |
58 | sr_err("Failed to write FTDI data (%d): %s.", | |
59 | bytes_written, ftdi_get_error_string(devc->ftdic)); | |
60 | return SR_ERR; | |
61 | } else if (bytes_written != 5) { | |
62 | sr_err("FTDI write error, only %d/%d bytes written: %s.", | |
63 | bytes_written, 1, ftdi_get_error_string(devc->ftdic)); | |
64 | return SR_ERR; | |
65 | } | |
66 | ||
67 | return SR_OK; | |
68 | } | |
69 | ||
70 | SR_PRIV int p_ols_open(struct dev_context *devc) | |
71 | { | |
72 | int ret; | |
73 | ||
74 | /* Note: Caller checks devc and devc->ftdic. */ | |
75 | ||
76 | ret = ftdi_set_interface(devc->ftdic, INTERFACE_B); | |
77 | if (ret < 0) { | |
78 | sr_err("Failed to set FTDI interface B (%d): %s", ret, | |
79 | ftdi_get_error_string(devc->ftdic)); | |
80 | return SR_ERR; | |
81 | } | |
82 | ||
83 | ret = ftdi_usb_open_desc(devc->ftdic, USB_VENDOR_ID, USB_DEVICE_ID, | |
84 | USB_IPRODUCT, NULL); | |
85 | if (ret < 0) { | |
86 | /* Log errors, except for -3 ("device not found"). */ | |
87 | if (ret != -3) | |
88 | sr_err("Failed to open device (%d): %s", ret, | |
89 | ftdi_get_error_string(devc->ftdic)); | |
90 | return SR_ERR; | |
91 | } | |
92 | ||
93 | if ((ret = ftdi_usb_purge_buffers(devc->ftdic)) < 0) { | |
94 | sr_err("Failed to purge FTDI RX/TX buffers (%d): %s.", | |
95 | ret, ftdi_get_error_string(devc->ftdic)); | |
96 | goto err_open_close_ftdic; | |
97 | } | |
98 | ||
99 | ret = ftdi_set_bitmode(devc->ftdic, 0xff, BITMODE_RESET); | |
100 | if (ret < 0) { | |
101 | sr_err("Failed to reset the FTDI chip bitmode (%d): %s.", | |
102 | ret, ftdi_get_error_string(devc->ftdic)); | |
103 | goto err_open_close_ftdic; | |
104 | } | |
105 | ||
106 | ret = ftdi_set_latency_timer(devc->ftdic, 16); | |
107 | if (ret < 0) { | |
108 | sr_err("Failed to set FTDI latency timer (%d): %s.", | |
109 | ret, ftdi_get_error_string(devc->ftdic)); | |
110 | goto err_open_close_ftdic; | |
111 | } | |
112 | ||
113 | ret = ftdi_read_data_set_chunksize(devc->ftdic, 64 * 1024); | |
114 | if (ret < 0) { | |
115 | sr_err("Failed to set FTDI read data chunk size (%d): %s.", | |
116 | ret, ftdi_get_error_string(devc->ftdic)); | |
117 | goto err_open_close_ftdic; | |
118 | } | |
119 | ||
120 | return SR_OK; | |
121 | ||
122 | err_open_close_ftdic: | |
123 | ftdi_usb_close(devc->ftdic); | |
124 | ||
125 | return SR_ERR; | |
126 | } | |
127 | ||
128 | SR_PRIV int p_ols_close(struct dev_context *devc) | |
129 | { | |
130 | int ret; | |
131 | ||
132 | /* Note: Caller checks devc and devc->ftdic. */ | |
133 | ||
134 | if ((ret = ftdi_usb_close(devc->ftdic)) < 0) { | |
135 | sr_err("Failed to close FTDI device (%d): %s.", | |
136 | ret, ftdi_get_error_string(devc->ftdic)); | |
137 | return SR_ERR; | |
138 | } | |
139 | ||
140 | return SR_OK; | |
141 | } | |
142 | ||
143 | /* Configures the channel mask based on which channels are enabled. */ | |
144 | SR_PRIV void pols_channel_mask(const struct sr_dev_inst *sdi) | |
145 | { | |
146 | struct dev_context *devc; | |
147 | struct sr_channel *channel; | |
148 | const GSList *l; | |
149 | ||
150 | devc = sdi->priv; | |
151 | ||
152 | devc->channel_mask = 0; | |
153 | for (l = sdi->channels; l; l = l->next) { | |
154 | channel = l->data; | |
155 | if (channel->enabled) | |
156 | devc->channel_mask |= 1 << channel->index; | |
157 | } | |
158 | } | |
159 | ||
160 | SR_PRIV int pols_convert_trigger(const struct sr_dev_inst *sdi) | |
161 | { | |
162 | struct dev_context *devc; | |
163 | struct sr_trigger *trigger; | |
164 | struct sr_trigger_stage *stage; | |
165 | struct sr_trigger_match *match; | |
166 | const GSList *l, *m; | |
167 | int i; | |
168 | ||
169 | devc = sdi->priv; | |
170 | ||
171 | devc->num_stages = 0; | |
172 | for (i = 0; i < NUM_TRIGGER_STAGES; i++) { | |
173 | devc->trigger_mask[i] = 0; | |
174 | devc->trigger_value[i] = 0; | |
175 | devc->trigger_edge[i] = 0; | |
176 | } | |
177 | ||
178 | if (!(trigger = sr_session_trigger_get(sdi->session))) | |
179 | return SR_OK; | |
180 | ||
181 | devc->num_stages = g_slist_length(trigger->stages); | |
182 | if (devc->num_stages > NUM_TRIGGER_STAGES) { | |
183 | sr_err("This device only supports %d trigger stages.", | |
184 | NUM_TRIGGER_STAGES); | |
185 | return SR_ERR; | |
186 | } | |
187 | ||
188 | for (l = trigger->stages; l; l = l->next) { | |
189 | stage = l->data; | |
190 | for (m = stage->matches; m; m = m->next) { | |
191 | match = m->data; | |
192 | if (!match->channel->enabled) | |
193 | /* Ignore disabled channels with a trigger. */ | |
194 | continue; | |
195 | devc->trigger_mask[stage->stage] |= 1 << match->channel->index; | |
196 | if (match->match == SR_TRIGGER_ONE || match->match == SR_TRIGGER_RISING) | |
197 | devc->trigger_value[stage->stage] |= 1 << match->channel->index; | |
198 | if (match->match == SR_TRIGGER_RISING || match->match == SR_TRIGGER_FALLING) | |
199 | devc->trigger_edge[stage->stage] |= 1 << match->channel->index; | |
200 | } | |
201 | } | |
202 | ||
203 | return SR_OK; | |
204 | } | |
205 | ||
206 | SR_PRIV struct sr_dev_inst *p_ols_get_metadata(uint8_t *buf, int bytes_read, struct dev_context *devc) | |
207 | { | |
208 | struct sr_dev_inst *sdi; | |
209 | uint32_t tmp_int, ui; | |
210 | uint8_t key, type, token; | |
211 | GString *tmp_str, *devname, *version; | |
212 | guchar tmp_c; | |
213 | int index; | |
214 | ||
215 | sdi = g_malloc0(sizeof(struct sr_dev_inst)); | |
216 | sdi->status = SR_ST_INACTIVE; | |
217 | sdi->priv = devc; | |
218 | ||
219 | devname = g_string_new(""); | |
220 | version = g_string_new(""); | |
221 | ||
222 | index = 0; | |
223 | while (index < bytes_read) { | |
224 | key = buf[index++]; | |
225 | if (key == 0x00) { | |
226 | sr_dbg("Got metadata key 0x00, metadata ends."); | |
227 | break; | |
228 | } | |
229 | type = key >> 5; | |
230 | token = key & 0x1f; | |
231 | switch (type) { | |
232 | case 0: | |
233 | /* NULL-terminated string */ | |
234 | tmp_str = g_string_new(""); | |
235 | while ((index < bytes_read) && ((tmp_c = buf[index++]) != '\0')) | |
236 | g_string_append_c(tmp_str, tmp_c); | |
237 | sr_dbg("Got metadata key 0x%.2x value '%s'.", | |
238 | key, tmp_str->str); | |
239 | switch (token) { | |
240 | case 0x01: | |
241 | /* Device name */ | |
242 | devname = g_string_append(devname, tmp_str->str); | |
243 | break; | |
244 | case 0x02: | |
245 | /* FPGA firmware version */ | |
246 | if (version->len) | |
247 | g_string_append(version, ", "); | |
248 | g_string_append(version, "FPGA version "); | |
249 | g_string_append(version, tmp_str->str); | |
250 | break; | |
251 | case 0x03: | |
252 | /* Ancillary version */ | |
253 | if (version->len) | |
254 | g_string_append(version, ", "); | |
255 | g_string_append(version, "Ancillary version "); | |
256 | g_string_append(version, tmp_str->str); | |
257 | break; | |
258 | default: | |
259 | sr_info("Unknown token 0x%.2x: '%s'", | |
260 | token, tmp_str->str); | |
261 | break; | |
262 | } | |
263 | g_string_free(tmp_str, TRUE); | |
264 | break; | |
265 | case 1: | |
266 | /* 32-bit unsigned integer */ | |
267 | tmp_int = RB32(&buf[index]); | |
268 | index += sizeof(uint32_t); | |
269 | sr_dbg("Got metadata key 0x%.2x value 0x%.8x.", | |
270 | key, tmp_int); | |
271 | switch (token) { | |
272 | case 0x00: | |
273 | /* Number of usable channels */ | |
274 | for (ui = 0; ui < tmp_int; ui++) | |
275 | sr_channel_new(sdi, ui, SR_CHANNEL_LOGIC, TRUE, | |
276 | p_ols_channel_names[ui]); | |
277 | break; | |
278 | case 0x01: | |
279 | /* Amount of sample memory available (bytes) */ | |
280 | devc->max_samplebytes = tmp_int; | |
281 | break; | |
282 | case 0x02: | |
283 | /* Amount of dynamic memory available (bytes) */ | |
284 | /* what is this for? */ | |
285 | break; | |
286 | case 0x03: | |
287 | /* Maximum sample rate (Hz) */ | |
288 | devc->max_samplerate = tmp_int; | |
289 | break; | |
290 | case 0x04: | |
291 | /* protocol version */ | |
292 | devc->protocol_version = tmp_int; | |
293 | break; | |
294 | default: | |
295 | sr_info("Unknown token 0x%.2x: 0x%.8x.", | |
296 | token, tmp_int); | |
297 | break; | |
298 | } | |
299 | break; | |
300 | case 2: | |
301 | /* 8-bit unsigned integer */ | |
302 | tmp_c = buf[index++]; | |
303 | sr_dbg("Got metadata key 0x%.2x value 0x%.2x.", | |
304 | key, tmp_c); | |
305 | switch (token) { | |
306 | case 0x00: | |
307 | /* Number of usable channels */ | |
308 | for (ui = 0; ui < tmp_c; ui++) | |
309 | sr_channel_new(sdi, ui, SR_CHANNEL_LOGIC, TRUE, | |
310 | p_ols_channel_names[ui]); | |
311 | break; | |
312 | case 0x01: | |
313 | /* protocol version */ | |
314 | devc->protocol_version = tmp_c; | |
315 | break; | |
316 | default: | |
317 | sr_info("Unknown token 0x%.2x: 0x%.2x.", | |
318 | token, tmp_c); | |
319 | break; | |
320 | } | |
321 | break; | |
322 | default: | |
323 | /* unknown type */ | |
324 | break; | |
325 | } | |
326 | } | |
327 | ||
328 | sdi->model = devname->str; | |
329 | sdi->version = version->str; | |
330 | g_string_free(devname, FALSE); | |
331 | g_string_free(version, FALSE); | |
332 | ||
333 | return sdi; | |
334 | } | |
335 | ||
336 | SR_PRIV int p_ols_set_samplerate(const struct sr_dev_inst *sdi, | |
337 | const uint64_t samplerate) | |
338 | { | |
339 | struct dev_context *devc; | |
340 | ||
341 | devc = sdi->priv; | |
342 | if (devc->max_samplerate && samplerate > devc->max_samplerate) | |
343 | return SR_ERR_SAMPLERATE; | |
344 | ||
345 | if (samplerate > CLOCK_RATE) { | |
346 | sr_info("Enabling demux mode."); | |
347 | devc->flag_reg |= FLAG_DEMUX; | |
348 | devc->flag_reg &= ~FLAG_FILTER; | |
349 | devc->max_channels = NUM_CHANNELS / 2; | |
350 | devc->cur_samplerate_divider = (CLOCK_RATE * 2 / samplerate) - 1; | |
351 | } else { | |
352 | sr_info("Disabling demux mode."); | |
353 | devc->flag_reg &= ~FLAG_DEMUX; | |
354 | devc->flag_reg |= FLAG_FILTER; | |
355 | devc->max_channels = NUM_CHANNELS; | |
356 | devc->cur_samplerate_divider = (CLOCK_RATE / samplerate) - 1; | |
357 | } | |
358 | ||
359 | /* Calculate actual samplerate used and complain if it is different | |
360 | * from the requested. | |
361 | */ | |
362 | devc->cur_samplerate = CLOCK_RATE / (devc->cur_samplerate_divider + 1); | |
363 | if (devc->flag_reg & FLAG_DEMUX) | |
364 | devc->cur_samplerate *= 2; | |
365 | if (devc->cur_samplerate != samplerate) | |
366 | sr_info("Can't match samplerate %" PRIu64 ", using %" | |
367 | PRIu64 ".", samplerate, devc->cur_samplerate); | |
368 | ||
369 | return SR_OK; | |
370 | } | |
371 | ||
372 | SR_PRIV int p_ols_receive_data(int fd, int revents, void *cb_data) | |
373 | { | |
374 | struct dev_context *devc; | |
375 | struct sr_dev_inst *sdi; | |
376 | struct sr_datafeed_packet packet; | |
377 | struct sr_datafeed_logic logic; | |
378 | uint32_t sample; | |
379 | int num_channels, offset, j; | |
380 | int bytes_read, index; | |
381 | unsigned int i; | |
382 | unsigned char byte; | |
383 | ||
384 | (void)fd; | |
385 | (void)revents; | |
386 | ||
387 | sdi = cb_data; | |
388 | devc = sdi->priv; | |
389 | ||
390 | if (devc->num_transfers++ == 0) { | |
391 | devc->raw_sample_buf = g_try_malloc(devc->limit_samples * 4); | |
392 | if (!devc->raw_sample_buf) { | |
393 | sr_err("Sample buffer malloc failed."); | |
394 | return FALSE; | |
395 | } | |
396 | /* fill with 1010... for debugging */ | |
397 | memset(devc->raw_sample_buf, 0x82, devc->limit_samples * 4); | |
398 | } | |
399 | ||
400 | if ((devc->num_samples < devc->limit_samples) && (devc->cnt_samples < devc->max_samples)) { | |
401 | ||
402 | num_channels = 0; | |
403 | for (i = NUM_CHANNELS; i > 0x02; i /= 2) { | |
404 | if ((devc->flag_reg & i) == 0) { | |
405 | num_channels++; | |
406 | } | |
407 | } | |
408 | ||
409 | /* Get a block of data. */ | |
410 | bytes_read = ftdi_read_data(devc->ftdic, devc->ftdi_buf, FTDI_BUF_SIZE); | |
411 | if (bytes_read < 0) { | |
412 | sr_err("Failed to read FTDI data (%d): %s.", | |
413 | bytes_read, ftdi_get_error_string(devc->ftdic)); | |
414 | sr_dev_acquisition_stop(sdi); | |
415 | return FALSE; | |
416 | } | |
417 | if (bytes_read == 0) { | |
418 | sr_spew("Received 0 bytes, nothing to do."); | |
419 | return TRUE; | |
420 | } | |
421 | ||
422 | sr_dbg("Received %d bytes", bytes_read); | |
423 | ||
424 | index = 0; | |
425 | while (index < bytes_read) { | |
426 | byte = devc->ftdi_buf[index++]; | |
427 | devc->cnt_bytes++; | |
428 | ||
429 | devc->sample[devc->num_bytes++] = byte; | |
430 | sr_spew("Received byte 0x%.2x.", byte); | |
431 | ||
432 | if ((devc->flag_reg & FLAG_DEMUX) && (devc->flag_reg & FLAG_RLE)) { | |
433 | /* RLE in demux mode must be processed differently | |
434 | * since in this case the RLE encoder is operating on pairs of samples. | |
435 | */ | |
436 | if (devc->num_bytes == num_channels * 2) { | |
437 | devc->cnt_samples += 2; | |
438 | devc->cnt_samples_rle += 2; | |
439 | /* | |
440 | * Got a sample pair. Convert from the OLS's little-endian | |
441 | * sample to the local format. | |
442 | */ | |
443 | sample = devc->sample[0] | (devc->sample[1] << 8) \ | |
444 | | (devc->sample[2] << 16) | (devc->sample[3] << 24); | |
445 | sr_spew("Received sample pair 0x%.*x.", devc->num_bytes * 2, sample); | |
446 | ||
447 | /* | |
448 | * In RLE mode the high bit of the sample pair is the | |
449 | * "count" flag, meaning this sample pair is the number | |
450 | * of times the previous sample pair occurred. | |
451 | */ | |
452 | if (devc->sample[devc->num_bytes - 1] & 0x80) { | |
453 | /* Clear the high bit. */ | |
454 | sample &= ~(0x80 << (devc->num_bytes - 1) * 8); | |
455 | devc->rle_count = sample; | |
456 | devc->cnt_samples_rle += devc->rle_count * 2; | |
457 | sr_dbg("RLE count: %u.", devc->rle_count * 2); | |
458 | devc->num_bytes = 0; | |
459 | continue; | |
460 | } | |
461 | devc->num_samples += (devc->rle_count + 1) * 2; | |
462 | if (devc->num_samples > devc->limit_samples) { | |
463 | /* Save us from overrunning the buffer. */ | |
464 | devc->rle_count -= (devc->num_samples - devc->limit_samples) / 2; | |
465 | devc->num_samples = devc->limit_samples; | |
466 | index = bytes_read; | |
467 | } | |
468 | ||
469 | /* | |
470 | * Some channel groups may have been turned | |
471 | * off, to speed up transfer between the | |
472 | * hardware and the PC. Expand that here before | |
473 | * submitting it over the session bus -- | |
474 | * whatever is listening on the bus will be | |
475 | * expecting a full 32-bit sample, based on | |
476 | * the number of channels. | |
477 | */ | |
478 | j = 0; | |
479 | /* expand first sample */ | |
480 | memset(devc->tmp_sample, 0, 4); | |
481 | for (i = 0; i < 2; i++) { | |
482 | if (((devc->flag_reg >> 2) & (1 << i)) == 0) { | |
483 | /* | |
484 | * This channel group was | |
485 | * enabled, copy from received | |
486 | * sample. | |
487 | */ | |
488 | devc->tmp_sample[i] = devc->sample[j++]; | |
489 | } | |
490 | } | |
491 | /* Clear out the most significant bit of the sample */ | |
492 | devc->tmp_sample[devc->num_bytes - 1] &= 0x7f; | |
493 | sr_spew("Expanded sample 1: 0x%.2x%.2x%.2x%.2x.", | |
494 | devc->tmp_sample[3], devc->tmp_sample[2], | |
495 | devc->tmp_sample[1], devc->tmp_sample[0]); | |
496 | ||
497 | /* expand second sample */ | |
498 | memset(devc->tmp_sample2, 0, 4); | |
499 | for (i = 0; i < 2; i++) { | |
500 | if (((devc->flag_reg >> 2) & (1 << i)) == 0) { | |
501 | /* | |
502 | * This channel group was | |
503 | * enabled, copy from received | |
504 | * sample. | |
505 | */ | |
506 | devc->tmp_sample2[i] = devc->sample[j++]; | |
507 | } | |
508 | } | |
509 | /* Clear out the most significant bit of the sample */ | |
510 | devc->tmp_sample2[devc->num_bytes - 1] &= 0x7f; | |
511 | sr_spew("Expanded sample 2: 0x%.2x%.2x%.2x%.2x.", | |
512 | devc->tmp_sample2[3], devc->tmp_sample2[2], | |
513 | devc->tmp_sample2[1], devc->tmp_sample2[0]); | |
514 | ||
515 | /* | |
516 | * OLS sends its sample buffer backwards. | |
517 | * store it in reverse order here, so we can dump | |
518 | * this on the session bus later. | |
519 | */ | |
520 | offset = (devc->limit_samples - devc->num_samples) * 4; | |
521 | for (i = 0; i <= devc->rle_count; i++) { | |
522 | memcpy(devc->raw_sample_buf + offset + (i * 8), | |
523 | devc->tmp_sample2, 4); | |
524 | memcpy(devc->raw_sample_buf + offset + (4 + (i * 8)), | |
525 | devc->tmp_sample, 4); | |
526 | } | |
527 | memset(devc->sample, 0, 4); | |
528 | devc->num_bytes = 0; | |
529 | devc->rle_count = 0; | |
530 | } | |
531 | } | |
532 | else { | |
533 | if (devc->num_bytes == num_channels) { | |
534 | devc->cnt_samples++; | |
535 | devc->cnt_samples_rle++; | |
536 | /* | |
537 | * Got a full sample. Convert from the OLS's little-endian | |
538 | * sample to the local format. | |
539 | */ | |
540 | sample = devc->sample[0] | (devc->sample[1] << 8) \ | |
541 | | (devc->sample[2] << 16) | (devc->sample[3] << 24); | |
542 | sr_spew("Received sample 0x%.*x.", devc->num_bytes * 2, sample); | |
543 | if (devc->flag_reg & FLAG_RLE) { | |
544 | /* | |
545 | * In RLE mode the high bit of the sample is the | |
546 | * "count" flag, meaning this sample is the number | |
547 | * of times the previous sample occurred. | |
548 | */ | |
549 | if (devc->sample[devc->num_bytes - 1] & 0x80) { | |
550 | /* Clear the high bit. */ | |
551 | sample &= ~(0x80 << (devc->num_bytes - 1) * 8); | |
552 | devc->rle_count = sample; | |
553 | devc->cnt_samples_rle += devc->rle_count; | |
554 | sr_dbg("RLE count: %u.", devc->rle_count); | |
555 | devc->num_bytes = 0; | |
556 | continue; | |
557 | } | |
558 | } | |
559 | devc->num_samples += devc->rle_count + 1; | |
560 | if (devc->num_samples > devc->limit_samples) { | |
561 | /* Save us from overrunning the buffer. */ | |
562 | devc->rle_count -= devc->num_samples - devc->limit_samples; | |
563 | devc->num_samples = devc->limit_samples; | |
564 | index = bytes_read; | |
565 | } | |
566 | ||
567 | if (num_channels < 4) { | |
568 | /* | |
569 | * Some channel groups may have been turned | |
570 | * off, to speed up transfer between the | |
571 | * hardware and the PC. Expand that here before | |
572 | * submitting it over the session bus -- | |
573 | * whatever is listening on the bus will be | |
574 | * expecting a full 32-bit sample, based on | |
575 | * the number of channels. | |
576 | */ | |
577 | j = 0; | |
578 | memset(devc->tmp_sample, 0, 4); | |
579 | for (i = 0; i < 4; i++) { | |
580 | if (((devc->flag_reg >> 2) & (1 << i)) == 0) { | |
581 | /* | |
582 | * This channel group was | |
583 | * enabled, copy from received | |
584 | * sample. | |
585 | */ | |
586 | devc->tmp_sample[i] = devc->sample[j++]; | |
587 | } | |
588 | } | |
589 | memcpy(devc->sample, devc->tmp_sample, 4); | |
590 | sr_spew("Expanded sample: 0x%.8x.", sample); | |
591 | } | |
592 | ||
593 | /* | |
594 | * Pipistrello OLS sends its sample buffer backwards. | |
595 | * store it in reverse order here, so we can dump | |
596 | * this on the session bus later. | |
597 | */ | |
598 | offset = (devc->limit_samples - devc->num_samples) * 4; | |
599 | for (i = 0; i <= devc->rle_count; i++) { | |
600 | memcpy(devc->raw_sample_buf + offset + (i * 4), | |
601 | devc->sample, 4); | |
602 | } | |
603 | memset(devc->sample, 0, 4); | |
604 | devc->num_bytes = 0; | |
605 | devc->rle_count = 0; | |
606 | } | |
607 | } | |
608 | } | |
609 | return TRUE; | |
610 | } else { | |
611 | do { | |
612 | bytes_read = ftdi_read_data(devc->ftdic, devc->ftdi_buf, FTDI_BUF_SIZE); | |
613 | } while (bytes_read > 0); | |
614 | ||
615 | /* | |
616 | * We've acquired all the samples we asked for -- we're done. | |
617 | * Send the (properly-ordered) buffer to the frontend. | |
618 | */ | |
619 | sr_dbg("Received %d bytes, %d samples, %d decompressed samples.", | |
620 | devc->cnt_bytes, devc->cnt_samples, | |
621 | devc->cnt_samples_rle); | |
622 | if (devc->trigger_at != -1) { | |
623 | /* | |
624 | * A trigger was set up, so we need to tell the frontend | |
625 | * about it. | |
626 | */ | |
627 | if (devc->trigger_at > 0) { | |
628 | /* There are pre-trigger samples, send those first. */ | |
629 | packet.type = SR_DF_LOGIC; | |
630 | packet.payload = &logic; | |
631 | logic.length = devc->trigger_at * 4; | |
632 | logic.unitsize = 4; | |
633 | logic.data = devc->raw_sample_buf + | |
634 | (devc->limit_samples - devc->num_samples) * 4; | |
635 | sr_session_send(sdi, &packet); | |
636 | } | |
637 | ||
638 | /* Send the trigger. */ | |
639 | std_session_send_df_trigger(sdi); | |
640 | ||
641 | /* Send post-trigger samples. */ | |
642 | packet.type = SR_DF_LOGIC; | |
643 | packet.payload = &logic; | |
644 | logic.length = (devc->num_samples * 4) - (devc->trigger_at * 4); | |
645 | logic.unitsize = 4; | |
646 | logic.data = devc->raw_sample_buf + devc->trigger_at * 4 + | |
647 | (devc->limit_samples - devc->num_samples) * 4; | |
648 | sr_session_send(sdi, &packet); | |
649 | } else { | |
650 | /* no trigger was used */ | |
651 | packet.type = SR_DF_LOGIC; | |
652 | packet.payload = &logic; | |
653 | logic.length = devc->num_samples * 4; | |
654 | logic.unitsize = 4; | |
655 | logic.data = devc->raw_sample_buf + | |
656 | (devc->limit_samples - devc->num_samples) * 4; | |
657 | sr_session_send(sdi, &packet); | |
658 | } | |
659 | g_free(devc->raw_sample_buf); | |
660 | ||
661 | sr_dev_acquisition_stop(sdi); | |
662 | } | |
663 | ||
664 | return TRUE; | |
665 | } |