]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2013 Bert Vermeulen <bert@biot.com> | |
5 | * | |
6 | * This program is free software: you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation, either version 3 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
18 | */ | |
19 | ||
20 | #include <config.h> | |
21 | #include "protocol.h" | |
22 | ||
23 | #define SERIALCOMM "115200/8n1" | |
24 | ||
25 | static const uint32_t scanopts[] = { | |
26 | SR_CONF_CONN, | |
27 | SR_CONF_SERIALCOMM, | |
28 | }; | |
29 | ||
30 | static const uint32_t drvopts[] = { | |
31 | SR_CONF_LOGIC_ANALYZER, | |
32 | }; | |
33 | ||
34 | static const uint32_t devopts[] = { | |
35 | SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
36 | SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
37 | SR_CONF_TRIGGER_MATCH | SR_CONF_LIST, | |
38 | SR_CONF_CAPTURE_RATIO | SR_CONF_GET | SR_CONF_SET, | |
39 | SR_CONF_EXTERNAL_CLOCK | SR_CONF_SET, | |
40 | SR_CONF_PATTERN_MODE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
41 | SR_CONF_SWAP | SR_CONF_SET, | |
42 | SR_CONF_RLE | SR_CONF_GET | SR_CONF_SET, | |
43 | }; | |
44 | ||
45 | static const int32_t trigger_matches[] = { | |
46 | SR_TRIGGER_ZERO, | |
47 | SR_TRIGGER_ONE, | |
48 | }; | |
49 | ||
50 | #define STR_PATTERN_NONE "None" | |
51 | #define STR_PATTERN_EXTERNAL "External" | |
52 | #define STR_PATTERN_INTERNAL "Internal" | |
53 | ||
54 | /* Supported methods of test pattern outputs */ | |
55 | enum { | |
56 | /** | |
57 | * Capture pins 31:16 (unbuffered wing) output a test pattern | |
58 | * that can captured on pins 0:15. | |
59 | */ | |
60 | PATTERN_EXTERNAL, | |
61 | ||
62 | /** Route test pattern internally to capture buffer. */ | |
63 | PATTERN_INTERNAL, | |
64 | }; | |
65 | ||
66 | static const char *patterns[] = { | |
67 | STR_PATTERN_NONE, | |
68 | STR_PATTERN_EXTERNAL, | |
69 | STR_PATTERN_INTERNAL, | |
70 | }; | |
71 | ||
72 | /* Channels are numbered 0-31 (on the PCB silkscreen). */ | |
73 | SR_PRIV const char *ols_channel_names[] = { | |
74 | "0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12", | |
75 | "13", "14", "15", "16", "17", "18", "19", "20", "21", "22", "23", | |
76 | "24", "25", "26", "27", "28", "29", "30", "31", | |
77 | }; | |
78 | ||
79 | /* Default supported samplerates, can be overridden by device metadata. */ | |
80 | static const uint64_t samplerates[] = { | |
81 | SR_HZ(10), | |
82 | SR_MHZ(200), | |
83 | SR_HZ(1), | |
84 | }; | |
85 | ||
86 | #define RESPONSE_DELAY_US (10 * 1000) | |
87 | ||
88 | static GSList *scan(struct sr_dev_driver *di, GSList *options) | |
89 | { | |
90 | struct sr_config *src; | |
91 | struct sr_dev_inst *sdi; | |
92 | struct sr_serial_dev_inst *serial; | |
93 | GSList *l; | |
94 | int ret; | |
95 | unsigned int i; | |
96 | const char *conn, *serialcomm; | |
97 | char buf[8]; | |
98 | ||
99 | conn = serialcomm = NULL; | |
100 | for (l = options; l; l = l->next) { | |
101 | src = l->data; | |
102 | switch (src->key) { | |
103 | case SR_CONF_CONN: | |
104 | conn = g_variant_get_string(src->data, NULL); | |
105 | break; | |
106 | case SR_CONF_SERIALCOMM: | |
107 | serialcomm = g_variant_get_string(src->data, NULL); | |
108 | break; | |
109 | } | |
110 | } | |
111 | if (!conn) | |
112 | return NULL; | |
113 | ||
114 | if (!serialcomm) | |
115 | serialcomm = SERIALCOMM; | |
116 | ||
117 | serial = sr_serial_dev_inst_new(conn, serialcomm); | |
118 | ||
119 | /* The discovery procedure is like this: first send the Reset | |
120 | * command (0x00) 5 times, since the device could be anywhere | |
121 | * in a 5-byte command. Then send the ID command (0x02). | |
122 | * If the device responds with 4 bytes ("OLS1" or "SLA1"), we | |
123 | * have a match. | |
124 | */ | |
125 | sr_info("Probing %s.", conn); | |
126 | if (serial_open(serial, SERIAL_RDWR) != SR_OK) | |
127 | return NULL; | |
128 | ||
129 | if (ols_send_reset(serial) != SR_OK) { | |
130 | serial_close(serial); | |
131 | sr_err("Could not use port %s. Quitting.", conn); | |
132 | return NULL; | |
133 | } | |
134 | send_shortcommand(serial, CMD_ID); | |
135 | ||
136 | g_usleep(RESPONSE_DELAY_US); | |
137 | ||
138 | if (sp_input_waiting(serial->data) == 0) { | |
139 | sr_dbg("Didn't get any reply."); | |
140 | return NULL; | |
141 | } | |
142 | ||
143 | ret = serial_read_blocking(serial, buf, 4, serial_timeout(serial, 4)); | |
144 | if (ret != 4) { | |
145 | sr_err("Invalid reply (expected 4 bytes, got %d).", ret); | |
146 | return NULL; | |
147 | } | |
148 | ||
149 | if (strncmp(buf, "1SLO", 4) && strncmp(buf, "1ALS", 4)) { | |
150 | sr_err("Invalid reply (expected '1SLO' or '1ALS', got " | |
151 | "'%c%c%c%c').", buf[0], buf[1], buf[2], buf[3]); | |
152 | return NULL; | |
153 | } | |
154 | ||
155 | /* Definitely using the OLS protocol, check if it supports | |
156 | * the metadata command. | |
157 | */ | |
158 | send_shortcommand(serial, CMD_METADATA); | |
159 | ||
160 | g_usleep(RESPONSE_DELAY_US); | |
161 | ||
162 | if (sp_input_waiting(serial->data) != 0) { | |
163 | /* Got metadata. */ | |
164 | sdi = get_metadata(serial); | |
165 | } else { | |
166 | /* Not an OLS -- some other board that uses the sump protocol. */ | |
167 | sr_info("Device does not support metadata."); | |
168 | sdi = g_malloc0(sizeof(struct sr_dev_inst)); | |
169 | sdi->status = SR_ST_INACTIVE; | |
170 | sdi->vendor = g_strdup("Sump"); | |
171 | sdi->model = g_strdup("Logic Analyzer"); | |
172 | sdi->version = g_strdup("v1.0"); | |
173 | for (i = 0; i < ARRAY_SIZE(ols_channel_names); i++) | |
174 | sr_channel_new(sdi, i, SR_CHANNEL_LOGIC, TRUE, | |
175 | ols_channel_names[i]); | |
176 | sdi->priv = ols_dev_new(); | |
177 | } | |
178 | /* Configure samplerate and divider. */ | |
179 | if (ols_set_samplerate(sdi, DEFAULT_SAMPLERATE) != SR_OK) | |
180 | sr_dbg("Failed to set default samplerate (%"PRIu64").", | |
181 | DEFAULT_SAMPLERATE); | |
182 | sdi->inst_type = SR_INST_SERIAL; | |
183 | sdi->conn = serial; | |
184 | ||
185 | serial_close(serial); | |
186 | ||
187 | return std_scan_complete(di, g_slist_append(NULL, sdi)); | |
188 | } | |
189 | ||
190 | static int config_get(uint32_t key, GVariant **data, | |
191 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) | |
192 | { | |
193 | struct dev_context *devc; | |
194 | ||
195 | (void)cg; | |
196 | ||
197 | if (!sdi) | |
198 | return SR_ERR_ARG; | |
199 | ||
200 | devc = sdi->priv; | |
201 | ||
202 | switch (key) { | |
203 | case SR_CONF_SAMPLERATE: | |
204 | *data = g_variant_new_uint64(devc->cur_samplerate); | |
205 | break; | |
206 | case SR_CONF_CAPTURE_RATIO: | |
207 | *data = g_variant_new_uint64(devc->capture_ratio); | |
208 | break; | |
209 | case SR_CONF_LIMIT_SAMPLES: | |
210 | *data = g_variant_new_uint64(devc->limit_samples); | |
211 | break; | |
212 | case SR_CONF_PATTERN_MODE: | |
213 | if (devc->flag_reg & FLAG_EXTERNAL_TEST_MODE) | |
214 | *data = g_variant_new_string(STR_PATTERN_EXTERNAL); | |
215 | else if (devc->flag_reg & FLAG_INTERNAL_TEST_MODE) | |
216 | *data = g_variant_new_string(STR_PATTERN_INTERNAL); | |
217 | else | |
218 | *data = g_variant_new_string(STR_PATTERN_NONE); | |
219 | break; | |
220 | case SR_CONF_RLE: | |
221 | *data = g_variant_new_boolean(devc->flag_reg & FLAG_RLE ? TRUE : FALSE); | |
222 | break; | |
223 | default: | |
224 | return SR_ERR_NA; | |
225 | } | |
226 | ||
227 | return SR_OK; | |
228 | } | |
229 | ||
230 | static int config_set(uint32_t key, GVariant *data, | |
231 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) | |
232 | { | |
233 | struct dev_context *devc; | |
234 | uint16_t flag; | |
235 | uint64_t tmp_u64; | |
236 | const char *stropt; | |
237 | ||
238 | (void)cg; | |
239 | ||
240 | devc = sdi->priv; | |
241 | ||
242 | switch (key) { | |
243 | case SR_CONF_SAMPLERATE: | |
244 | tmp_u64 = g_variant_get_uint64(data); | |
245 | if (tmp_u64 < samplerates[0] || tmp_u64 > samplerates[1]) | |
246 | return SR_ERR_SAMPLERATE; | |
247 | return ols_set_samplerate(sdi, g_variant_get_uint64(data)); | |
248 | case SR_CONF_LIMIT_SAMPLES: | |
249 | tmp_u64 = g_variant_get_uint64(data); | |
250 | if (tmp_u64 < MIN_NUM_SAMPLES) | |
251 | return SR_ERR; | |
252 | devc->limit_samples = tmp_u64; | |
253 | break; | |
254 | case SR_CONF_CAPTURE_RATIO: | |
255 | devc->capture_ratio = g_variant_get_uint64(data); | |
256 | break; | |
257 | case SR_CONF_EXTERNAL_CLOCK: | |
258 | if (g_variant_get_boolean(data)) { | |
259 | sr_info("Enabling external clock."); | |
260 | devc->flag_reg |= FLAG_CLOCK_EXTERNAL; | |
261 | } else { | |
262 | sr_info("Disabled external clock."); | |
263 | devc->flag_reg &= ~FLAG_CLOCK_EXTERNAL; | |
264 | } | |
265 | break; | |
266 | case SR_CONF_PATTERN_MODE: | |
267 | stropt = g_variant_get_string(data, NULL); | |
268 | flag = 0xffff; | |
269 | if (!strcmp(stropt, STR_PATTERN_NONE)) { | |
270 | sr_info("Disabling test modes."); | |
271 | flag = 0x0000; | |
272 | } else if (!strcmp(stropt, STR_PATTERN_INTERNAL)) { | |
273 | sr_info("Enabling internal test mode."); | |
274 | flag = FLAG_INTERNAL_TEST_MODE; | |
275 | } else if (!strcmp(stropt, STR_PATTERN_EXTERNAL)) { | |
276 | sr_info("Enabling external test mode."); | |
277 | flag = FLAG_EXTERNAL_TEST_MODE; | |
278 | } else { | |
279 | return SR_ERR; | |
280 | } | |
281 | if (flag != 0xffff) { | |
282 | devc->flag_reg &= ~(FLAG_INTERNAL_TEST_MODE | FLAG_EXTERNAL_TEST_MODE); | |
283 | devc->flag_reg |= flag; | |
284 | } | |
285 | break; | |
286 | case SR_CONF_SWAP: | |
287 | if (g_variant_get_boolean(data)) { | |
288 | sr_info("Enabling channel swapping."); | |
289 | devc->flag_reg |= FLAG_SWAP_CHANNELS; | |
290 | } else { | |
291 | sr_info("Disabling channel swapping."); | |
292 | devc->flag_reg &= ~FLAG_SWAP_CHANNELS; | |
293 | } | |
294 | break; | |
295 | case SR_CONF_RLE: | |
296 | if (g_variant_get_boolean(data)) { | |
297 | sr_info("Enabling RLE."); | |
298 | devc->flag_reg |= FLAG_RLE; | |
299 | } else { | |
300 | sr_info("Disabling RLE."); | |
301 | devc->flag_reg &= ~FLAG_RLE; | |
302 | } | |
303 | break; | |
304 | default: | |
305 | return SR_ERR_NA; | |
306 | } | |
307 | ||
308 | return SR_OK; | |
309 | } | |
310 | ||
311 | static int config_list(uint32_t key, GVariant **data, | |
312 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) | |
313 | { | |
314 | struct dev_context *devc; | |
315 | int num_ols_changrp, i; | |
316 | ||
317 | switch (key) { | |
318 | case SR_CONF_SCAN_OPTIONS: | |
319 | case SR_CONF_DEVICE_OPTIONS: | |
320 | return STD_CONFIG_LIST(key, data, sdi, cg, scanopts, drvopts, devopts); | |
321 | case SR_CONF_SAMPLERATE: | |
322 | *data = std_gvar_samplerates_steps(ARRAY_AND_SIZE(samplerates)); | |
323 | break; | |
324 | case SR_CONF_TRIGGER_MATCH: | |
325 | *data = std_gvar_array_i32(ARRAY_AND_SIZE(trigger_matches)); | |
326 | break; | |
327 | case SR_CONF_PATTERN_MODE: | |
328 | *data = g_variant_new_strv(ARRAY_AND_SIZE(patterns)); | |
329 | break; | |
330 | case SR_CONF_LIMIT_SAMPLES: | |
331 | if (!sdi) | |
332 | return SR_ERR_ARG; | |
333 | devc = sdi->priv; | |
334 | if (devc->flag_reg & FLAG_RLE) | |
335 | return SR_ERR_NA; | |
336 | if (devc->max_samples == 0) | |
337 | /* Device didn't specify sample memory size in metadata. */ | |
338 | return SR_ERR_NA; | |
339 | /* | |
340 | * Channel groups are turned off if no channels in that group are | |
341 | * enabled, making more room for samples for the enabled group. | |
342 | */ | |
343 | ols_channel_mask(sdi); | |
344 | num_ols_changrp = 0; | |
345 | for (i = 0; i < 4; i++) { | |
346 | if (devc->channel_mask & (0xff << (i * 8))) | |
347 | num_ols_changrp++; | |
348 | } | |
349 | ||
350 | *data = std_gvar_tuple_u64(MIN_NUM_SAMPLES, | |
351 | (num_ols_changrp) ? devc->max_samples / num_ols_changrp : MIN_NUM_SAMPLES); | |
352 | break; | |
353 | default: | |
354 | return SR_ERR_NA; | |
355 | } | |
356 | ||
357 | return SR_OK; | |
358 | } | |
359 | ||
360 | static int set_trigger(const struct sr_dev_inst *sdi, int stage) | |
361 | { | |
362 | struct dev_context *devc; | |
363 | struct sr_serial_dev_inst *serial; | |
364 | uint8_t cmd, arg[4]; | |
365 | ||
366 | devc = sdi->priv; | |
367 | serial = sdi->conn; | |
368 | ||
369 | cmd = CMD_SET_TRIGGER_MASK + stage * 4; | |
370 | arg[0] = devc->trigger_mask[stage] & 0xff; | |
371 | arg[1] = (devc->trigger_mask[stage] >> 8) & 0xff; | |
372 | arg[2] = (devc->trigger_mask[stage] >> 16) & 0xff; | |
373 | arg[3] = (devc->trigger_mask[stage] >> 24) & 0xff; | |
374 | if (send_longcommand(serial, cmd, arg) != SR_OK) | |
375 | return SR_ERR; | |
376 | ||
377 | cmd = CMD_SET_TRIGGER_VALUE + stage * 4; | |
378 | arg[0] = devc->trigger_value[stage] & 0xff; | |
379 | arg[1] = (devc->trigger_value[stage] >> 8) & 0xff; | |
380 | arg[2] = (devc->trigger_value[stage] >> 16) & 0xff; | |
381 | arg[3] = (devc->trigger_value[stage] >> 24) & 0xff; | |
382 | if (send_longcommand(serial, cmd, arg) != SR_OK) | |
383 | return SR_ERR; | |
384 | ||
385 | cmd = CMD_SET_TRIGGER_CONFIG + stage * 4; | |
386 | arg[0] = arg[1] = arg[3] = 0x00; | |
387 | arg[2] = stage; | |
388 | if (stage == devc->num_stages) | |
389 | /* Last stage, fire when this one matches. */ | |
390 | arg[3] |= TRIGGER_START; | |
391 | if (send_longcommand(serial, cmd, arg) != SR_OK) | |
392 | return SR_ERR; | |
393 | ||
394 | return SR_OK; | |
395 | } | |
396 | ||
397 | static int dev_acquisition_start(const struct sr_dev_inst *sdi) | |
398 | { | |
399 | struct dev_context *devc; | |
400 | struct sr_serial_dev_inst *serial; | |
401 | uint16_t samplecount, readcount, delaycount; | |
402 | uint8_t ols_changrp_mask, arg[4]; | |
403 | int num_ols_changrp; | |
404 | int ret, i; | |
405 | ||
406 | devc = sdi->priv; | |
407 | serial = sdi->conn; | |
408 | ||
409 | ols_channel_mask(sdi); | |
410 | ||
411 | num_ols_changrp = 0; | |
412 | ols_changrp_mask = 0; | |
413 | for (i = 0; i < 4; i++) { | |
414 | if (devc->channel_mask & (0xff << (i * 8))) { | |
415 | ols_changrp_mask |= (1 << i); | |
416 | num_ols_changrp++; | |
417 | } | |
418 | } | |
419 | ||
420 | /* | |
421 | * Limit readcount to prevent reading past the end of the hardware | |
422 | * buffer. | |
423 | */ | |
424 | samplecount = MIN(devc->max_samples / num_ols_changrp, devc->limit_samples); | |
425 | readcount = samplecount / 4; | |
426 | ||
427 | /* Rather read too many samples than too few. */ | |
428 | if (samplecount % 4 != 0) | |
429 | readcount++; | |
430 | ||
431 | /* Basic triggers. */ | |
432 | if (ols_convert_trigger(sdi) != SR_OK) { | |
433 | sr_err("Failed to configure channels."); | |
434 | return SR_ERR; | |
435 | } | |
436 | if (devc->num_stages > 0) { | |
437 | /* | |
438 | * According to http://mygizmos.org/ols/Logic-Sniffer-FPGA-Spec.pdf | |
439 | * reset command must be send prior each arm command | |
440 | */ | |
441 | sr_dbg("Send reset command before trigger configure"); | |
442 | if (ols_send_reset(serial) != SR_OK) | |
443 | return SR_ERR; | |
444 | ||
445 | delaycount = readcount * (1 - devc->capture_ratio / 100.0); | |
446 | devc->trigger_at = (readcount - delaycount) * 4 - devc->num_stages; | |
447 | for (i = 0; i <= devc->num_stages; i++) { | |
448 | sr_dbg("Setting OLS stage %d trigger.", i); | |
449 | if ((ret = set_trigger(sdi, i)) != SR_OK) | |
450 | return ret; | |
451 | } | |
452 | } else { | |
453 | /* No triggers configured, force trigger on first stage. */ | |
454 | sr_dbg("Forcing trigger at stage 0."); | |
455 | if ((ret = set_trigger(sdi, 0)) != SR_OK) | |
456 | return ret; | |
457 | delaycount = readcount; | |
458 | } | |
459 | ||
460 | /* Samplerate. */ | |
461 | sr_dbg("Setting samplerate to %" PRIu64 "Hz (divider %u)", | |
462 | devc->cur_samplerate, devc->cur_samplerate_divider); | |
463 | arg[0] = devc->cur_samplerate_divider & 0xff; | |
464 | arg[1] = (devc->cur_samplerate_divider & 0xff00) >> 8; | |
465 | arg[2] = (devc->cur_samplerate_divider & 0xff0000) >> 16; | |
466 | arg[3] = 0x00; | |
467 | if (send_longcommand(serial, CMD_SET_DIVIDER, arg) != SR_OK) | |
468 | return SR_ERR; | |
469 | ||
470 | /* Send sample limit and pre/post-trigger capture ratio. */ | |
471 | sr_dbg("Setting sample limit %d, trigger point at %d", | |
472 | (readcount - 1) * 4, (delaycount - 1) * 4); | |
473 | arg[0] = ((readcount - 1) & 0xff); | |
474 | arg[1] = ((readcount - 1) & 0xff00) >> 8; | |
475 | arg[2] = ((delaycount - 1) & 0xff); | |
476 | arg[3] = ((delaycount - 1) & 0xff00) >> 8; | |
477 | if (send_longcommand(serial, CMD_CAPTURE_SIZE, arg) != SR_OK) | |
478 | return SR_ERR; | |
479 | ||
480 | /* Flag register. */ | |
481 | sr_dbg("Setting intpat %s, extpat %s, RLE %s, noise_filter %s, demux %s", | |
482 | devc->flag_reg & FLAG_INTERNAL_TEST_MODE ? "on": "off", | |
483 | devc->flag_reg & FLAG_EXTERNAL_TEST_MODE ? "on": "off", | |
484 | devc->flag_reg & FLAG_RLE ? "on" : "off", | |
485 | devc->flag_reg & FLAG_FILTER ? "on": "off", | |
486 | devc->flag_reg & FLAG_DEMUX ? "on" : "off"); | |
487 | /* | |
488 | * Enable/disable OLS channel groups in the flag register according | |
489 | * to the channel mask. 1 means "disable channel". | |
490 | */ | |
491 | devc->flag_reg |= ~(ols_changrp_mask << 2) & 0x3c; | |
492 | arg[0] = devc->flag_reg & 0xff; | |
493 | arg[1] = devc->flag_reg >> 8; | |
494 | arg[2] = arg[3] = 0x00; | |
495 | if (send_longcommand(serial, CMD_SET_FLAGS, arg) != SR_OK) | |
496 | return SR_ERR; | |
497 | ||
498 | /* Start acquisition on the device. */ | |
499 | if (send_shortcommand(serial, CMD_RUN) != SR_OK) | |
500 | return SR_ERR; | |
501 | ||
502 | /* Reset all operational states. */ | |
503 | devc->rle_count = devc->num_transfers = 0; | |
504 | devc->num_samples = devc->num_bytes = 0; | |
505 | devc->cnt_bytes = devc->cnt_samples = devc->cnt_samples_rle = 0; | |
506 | memset(devc->sample, 0, 4); | |
507 | ||
508 | std_session_send_df_header(sdi); | |
509 | ||
510 | /* If the device stops sending for longer than it takes to send a byte, | |
511 | * that means it's finished. But wait at least 100 ms to be safe. | |
512 | */ | |
513 | serial_source_add(sdi->session, serial, G_IO_IN, 100, | |
514 | ols_receive_data, (struct sr_dev_inst *)sdi); | |
515 | ||
516 | return SR_OK; | |
517 | } | |
518 | ||
519 | static int dev_acquisition_stop(struct sr_dev_inst *sdi) | |
520 | { | |
521 | abort_acquisition(sdi); | |
522 | ||
523 | return SR_OK; | |
524 | } | |
525 | ||
526 | static struct sr_dev_driver ols_driver_info = { | |
527 | .name = "ols", | |
528 | .longname = "Openbench Logic Sniffer", | |
529 | .api_version = 1, | |
530 | .init = std_init, | |
531 | .cleanup = std_cleanup, | |
532 | .scan = scan, | |
533 | .dev_list = std_dev_list, | |
534 | .dev_clear = std_dev_clear, | |
535 | .config_get = config_get, | |
536 | .config_set = config_set, | |
537 | .config_list = config_list, | |
538 | .dev_open = std_serial_dev_open, | |
539 | .dev_close = std_serial_dev_close, | |
540 | .dev_acquisition_start = dev_acquisition_start, | |
541 | .dev_acquisition_stop = dev_acquisition_stop, | |
542 | .context = NULL, | |
543 | }; | |
544 | SR_REGISTER_DEV_DRIVER(ols_driver_info); |