]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2022 Gerhard Sittig <gerhard.sittig@gmx.net> | |
5 | * Copyright (C) 2020 Florian Schmidt <schmidt_florian@gmx.de> | |
6 | * Copyright (C) 2013 Marcus Comstedt <marcus@mc.pp.se> | |
7 | * Copyright (C) 2013 Bert Vermeulen <bert@biot.com> | |
8 | * Copyright (C) 2012 Joel Holdsworth <joel@airwebreathe.org.uk> | |
9 | * | |
10 | * This program is free software: you can redistribute it and/or modify | |
11 | * it under the terms of the GNU General Public License as published by | |
12 | * the Free Software Foundation, either version 3 of the License, or | |
13 | * (at your option) any later version. | |
14 | * | |
15 | * This program is distributed in the hope that it will be useful, | |
16 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
17 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
18 | * GNU General Public License for more details. | |
19 | * | |
20 | * You should have received a copy of the GNU General Public License | |
21 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
22 | */ | |
23 | ||
24 | /* | |
25 | * This driver implementation initially was derived from the | |
26 | * src/hardware/saleae-logic16/ source code. | |
27 | */ | |
28 | ||
29 | #include <config.h> | |
30 | ||
31 | #include <libsigrok/libsigrok.h> | |
32 | #include <string.h> | |
33 | ||
34 | #include "libsigrok-internal.h" | |
35 | #include "protocol.h" | |
36 | ||
37 | static const uint32_t scanopts[] = { | |
38 | SR_CONF_CONN, | |
39 | SR_CONF_PROBE_NAMES, | |
40 | }; | |
41 | ||
42 | static const uint32_t drvopts[] = { | |
43 | SR_CONF_LOGIC_ANALYZER, | |
44 | SR_CONF_SIGNAL_GENERATOR, | |
45 | }; | |
46 | ||
47 | static const uint32_t devopts[] = { | |
48 | SR_CONF_CONN | SR_CONF_GET, | |
49 | SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
50 | SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
51 | SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, | |
52 | #if WITH_THRESHOLD_DEVCFG | |
53 | SR_CONF_VOLTAGE_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
54 | #endif | |
55 | SR_CONF_TRIGGER_MATCH | SR_CONF_LIST, | |
56 | SR_CONF_CAPTURE_RATIO | SR_CONF_GET | SR_CONF_SET, | |
57 | SR_CONF_CONTINUOUS | SR_CONF_GET | SR_CONF_SET, | |
58 | }; | |
59 | ||
60 | static const uint32_t devopts_cg_logic[] = { | |
61 | #if !WITH_THRESHOLD_DEVCFG | |
62 | SR_CONF_VOLTAGE_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
63 | #endif | |
64 | }; | |
65 | ||
66 | static const uint32_t devopts_cg_pwm[] = { | |
67 | SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
68 | SR_CONF_OUTPUT_FREQUENCY | SR_CONF_GET | SR_CONF_SET, | |
69 | SR_CONF_DUTY_CYCLE | SR_CONF_GET | SR_CONF_SET, | |
70 | }; | |
71 | ||
72 | static const int32_t trigger_matches[] = { | |
73 | SR_TRIGGER_ZERO, | |
74 | SR_TRIGGER_ONE, | |
75 | SR_TRIGGER_RISING, | |
76 | SR_TRIGGER_FALLING, | |
77 | }; | |
78 | ||
79 | static const char *channel_names_logic[] = { | |
80 | "CH0", "CH1", "CH2", "CH3", "CH4", "CH5", "CH6", "CH7", | |
81 | "CH8", "CH9", "CH10", "CH11", "CH12", "CH13", "CH14", "CH15", | |
82 | "CH16", "CH17", "CH18", "CH19", "CH20", "CH21", "CH22", "CH23", | |
83 | "CH24", "CH25", "CH26", "CH27", "CH28", "CH29", "CH30", "CH31", | |
84 | }; | |
85 | ||
86 | static const char *channel_names_pwm[] = { | |
87 | "PWM1", "PWM2", | |
88 | }; | |
89 | ||
90 | /* | |
91 | * The devices have an upper samplerate limit of 100/200/500 MHz each. | |
92 | * But their hardware uses different base clocks (100/200/800MHz, this | |
93 | * is _not_ a typo) and a 16bit divider. Which results in per-model ranges | |
94 | * of supported rates which not only differ in the upper boundary, but | |
95 | * also at the lower boundary. It's assumed that the 10kHz rate is not | |
96 | * useful enough to provide by all means. Starting at 20kHz for all models | |
97 | * simplfies the implementation of the config API routines, and eliminates | |
98 | * redundancy in these samplerates tables. | |
99 | * | |
100 | * Streaming mode is constrained by the channel count and samplerate | |
101 | * product (the bits per second which need to travel the USB connection | |
102 | * while the acquisition is executing). Because streaming mode does not | |
103 | * compress the capture data, a later implementation may desire a finer | |
104 | * resolution. For now let's just stick with the 1/2/5 steps. | |
105 | */ | |
106 | ||
107 | static const uint64_t rates_500mhz[] = { | |
108 | SR_KHZ(20), | |
109 | SR_KHZ(50), | |
110 | SR_KHZ(100), | |
111 | SR_KHZ(200), | |
112 | SR_KHZ(500), | |
113 | SR_MHZ(1), | |
114 | SR_MHZ(2), | |
115 | SR_MHZ(5), | |
116 | SR_MHZ(10), | |
117 | SR_MHZ(20), | |
118 | SR_MHZ(50), | |
119 | SR_MHZ(100), | |
120 | SR_MHZ(200), | |
121 | SR_MHZ(500), | |
122 | }; | |
123 | ||
124 | static const uint64_t rates_200mhz[] = { | |
125 | SR_KHZ(20), | |
126 | SR_KHZ(50), | |
127 | SR_KHZ(100), | |
128 | SR_KHZ(200), | |
129 | SR_KHZ(500), | |
130 | SR_MHZ(1), | |
131 | SR_MHZ(2), | |
132 | SR_MHZ(5), | |
133 | SR_MHZ(10), | |
134 | SR_MHZ(20), | |
135 | SR_MHZ(50), | |
136 | SR_MHZ(100), | |
137 | SR_MHZ(200), | |
138 | }; | |
139 | ||
140 | static const uint64_t rates_100mhz[] = { | |
141 | SR_KHZ(20), | |
142 | SR_KHZ(50), | |
143 | SR_KHZ(100), | |
144 | SR_KHZ(200), | |
145 | SR_KHZ(500), | |
146 | SR_MHZ(1), | |
147 | SR_MHZ(2), | |
148 | SR_MHZ(5), | |
149 | SR_MHZ(10), | |
150 | SR_MHZ(20), | |
151 | SR_MHZ(50), | |
152 | SR_MHZ(100), | |
153 | }; | |
154 | ||
155 | /* | |
156 | * Only list a few discrete voltages, to form a useful set which covers | |
157 | * most logic families. Too many choices can make some applications use | |
158 | * a slider again. Which may lack a scale for the current value, and | |
159 | * leave users without feedback what the currently used value might be. | |
160 | */ | |
161 | static const double threshold_ranges[][2] = { | |
162 | { 0.4, 0.4, }, | |
163 | { 0.6, 0.6, }, | |
164 | { 0.9, 0.9, }, | |
165 | { 1.2, 1.2, }, | |
166 | { 1.4, 1.4, }, /* Default, 1.4V, index 4. */ | |
167 | { 2.0, 2.0, }, | |
168 | { 2.5, 2.5, }, | |
169 | { 4.0, 4.0, }, | |
170 | }; | |
171 | #define LOGIC_THRESHOLD_IDX_DFLT 4 | |
172 | ||
173 | static double threshold_voltage(const struct sr_dev_inst *sdi, double *high) | |
174 | { | |
175 | struct dev_context *devc; | |
176 | size_t idx; | |
177 | double voltage; | |
178 | ||
179 | devc = sdi->priv; | |
180 | idx = devc->threshold_voltage_idx; | |
181 | voltage = threshold_ranges[idx][0]; | |
182 | if (high) | |
183 | *high = threshold_ranges[idx][1]; | |
184 | ||
185 | return voltage; | |
186 | } | |
187 | ||
188 | /* Convenience. Release an allocated devc from error paths. */ | |
189 | static void kingst_la2016_free_devc(struct dev_context *devc) | |
190 | { | |
191 | if (!devc) | |
192 | return; | |
193 | g_free(devc->mcu_firmware); | |
194 | g_free(devc->fpga_bitstream); | |
195 | g_free(devc); | |
196 | } | |
197 | ||
198 | /* Convenience. Release an allocated sdi from error paths. */ | |
199 | static void kingst_la2016_free_sdi(struct sr_dev_inst *sdi) | |
200 | { | |
201 | if (!sdi) | |
202 | return; | |
203 | g_free(sdi->vendor); | |
204 | g_free(sdi->model); | |
205 | g_free(sdi->version); | |
206 | g_free(sdi->serial_num); | |
207 | g_free(sdi->connection_id); | |
208 | sr_usb_dev_inst_free(sdi->conn); | |
209 | kingst_la2016_free_devc(sdi->priv); | |
210 | } | |
211 | ||
212 | /* Convenience. Open a USB device (including claiming an interface). */ | |
213 | static int la2016_open_usb(struct sr_usb_dev_inst *usb, | |
214 | libusb_device *dev, gboolean show_message) | |
215 | { | |
216 | int ret; | |
217 | ||
218 | ret = libusb_open(dev, &usb->devhdl); | |
219 | if (ret != 0) { | |
220 | if (show_message) { | |
221 | sr_err("Cannot open device: %s.", | |
222 | libusb_error_name(ret)); | |
223 | } | |
224 | return SR_ERR_IO; | |
225 | } | |
226 | ||
227 | if (usb->address == 0xff) { | |
228 | /* | |
229 | * First encounter after firmware upload. | |
230 | * Grab current address after enumeration. | |
231 | */ | |
232 | usb->address = libusb_get_device_address(dev); | |
233 | } | |
234 | ||
235 | ret = libusb_claim_interface(usb->devhdl, USB_INTERFACE); | |
236 | if (ret == LIBUSB_ERROR_BUSY) { | |
237 | sr_err("Cannot claim USB interface. Another program or driver using it?"); | |
238 | return SR_ERR_IO; | |
239 | } else if (ret == LIBUSB_ERROR_NO_DEVICE) { | |
240 | sr_err("Device has been disconnected."); | |
241 | return SR_ERR_IO; | |
242 | } else if (ret != 0) { | |
243 | sr_err("Cannot claim USB interface: %s.", | |
244 | libusb_error_name(ret)); | |
245 | return SR_ERR_IO; | |
246 | } | |
247 | ||
248 | return SR_OK; | |
249 | } | |
250 | ||
251 | /* Convenience. Close an opened USB device (and release the interface). */ | |
252 | static void la2016_close_usb(struct sr_usb_dev_inst *usb) | |
253 | { | |
254 | ||
255 | if (!usb) | |
256 | return; | |
257 | ||
258 | if (usb->devhdl) { | |
259 | libusb_release_interface(usb->devhdl, USB_INTERFACE); | |
260 | libusb_close(usb->devhdl); | |
261 | usb->devhdl = NULL; | |
262 | } | |
263 | } | |
264 | ||
265 | /* Communicate to an USB device to identify the Kingst LA model. */ | |
266 | static int la2016_identify_read(struct sr_dev_inst *sdi, | |
267 | struct sr_usb_dev_inst *usb, libusb_device *dev, | |
268 | gboolean show_message) | |
269 | { | |
270 | int ret; | |
271 | ||
272 | ret = la2016_open_usb(usb, dev, show_message); | |
273 | if (ret != SR_OK) { | |
274 | if (show_message) | |
275 | sr_err("Cannot communicate to MCU firmware."); | |
276 | return ret; | |
277 | } | |
278 | ||
279 | /* | |
280 | * Also complete the hardware configuration (FPGA bitstream) | |
281 | * when MCU firmware communication became operational. Either | |
282 | * failure is considered fatal when probing for the device. | |
283 | */ | |
284 | ret = la2016_identify_device(sdi, show_message); | |
285 | if (ret == SR_OK) { | |
286 | ret = la2016_init_hardware(sdi); | |
287 | } | |
288 | ||
289 | la2016_close_usb(usb); | |
290 | ||
291 | return ret; | |
292 | } | |
293 | ||
294 | /* Find given conn_id in another USB enum. Identify Kingst LA model. */ | |
295 | static int la2016_identify_enum(struct sr_dev_inst *sdi) | |
296 | { | |
297 | struct sr_dev_driver *di; | |
298 | struct drv_context *drvc; | |
299 | struct sr_context *ctx; | |
300 | libusb_device **devlist, *dev; | |
301 | struct libusb_device_descriptor des; | |
302 | int ret, id_ret; | |
303 | size_t device_count, dev_idx; | |
304 | char conn_id[64]; | |
305 | ||
306 | di = sdi->driver; | |
307 | drvc = di->context; | |
308 | ctx = drvc->sr_ctx;; | |
309 | ||
310 | ret = libusb_get_device_list(ctx->libusb_ctx, &devlist); | |
311 | if (ret < 0) | |
312 | return SR_ERR_IO; | |
313 | device_count = ret; | |
314 | if (!device_count) | |
315 | return SR_ERR_IO; | |
316 | id_ret = SR_ERR_IO; | |
317 | for (dev_idx = 0; dev_idx < device_count; dev_idx++) { | |
318 | dev = devlist[dev_idx]; | |
319 | libusb_get_device_descriptor(dev, &des); | |
320 | if (des.idVendor != LA2016_VID || des.idProduct != LA2016_PID) | |
321 | continue; | |
322 | if (des.iProduct != LA2016_IPRODUCT_INDEX) | |
323 | continue; | |
324 | ret = usb_get_port_path(dev, conn_id, sizeof(conn_id)); | |
325 | if (ret < 0) | |
326 | continue; | |
327 | if (strcmp(sdi->connection_id, conn_id) != 0) | |
328 | continue; | |
329 | id_ret = la2016_identify_read(sdi, sdi->conn, dev, FALSE); | |
330 | break; | |
331 | } | |
332 | libusb_free_device_list(devlist, 1); | |
333 | ||
334 | return id_ret; | |
335 | } | |
336 | ||
337 | /* Wait for a device to re-appear after firmware upload. */ | |
338 | static int la2016_identify_wait(struct sr_dev_inst *sdi) | |
339 | { | |
340 | struct dev_context *devc; | |
341 | uint64_t reset_done, now, elapsed_ms; | |
342 | int ret; | |
343 | ||
344 | devc = sdi->priv; | |
345 | ||
346 | sr_info("Waiting for device to reset after firmware upload."); | |
347 | now = g_get_monotonic_time(); | |
348 | reset_done = devc->fw_uploaded + RENUM_GONE_DELAY_MS * 1000; | |
349 | if (now < reset_done) | |
350 | g_usleep(reset_done - now); | |
351 | do { | |
352 | now = g_get_monotonic_time(); | |
353 | elapsed_ms = (now - devc->fw_uploaded) / 1000; | |
354 | sr_spew("Waited %" PRIu64 "ms.", elapsed_ms); | |
355 | ret = la2016_identify_enum(sdi); | |
356 | if (ret == SR_OK) { | |
357 | devc->fw_uploaded = 0; | |
358 | break; | |
359 | } | |
360 | g_usleep(RENUM_POLL_INTERVAL_MS * 1000); | |
361 | } while (elapsed_ms < RENUM_CHECK_PERIOD_MS); | |
362 | if (ret != SR_OK) { | |
363 | sr_err("Device failed to re-enumerate."); | |
364 | return ret; | |
365 | } | |
366 | sr_info("Device came back after %" PRIi64 "ms.", elapsed_ms); | |
367 | ||
368 | return SR_OK; | |
369 | } | |
370 | ||
371 | /* | |
372 | * Open given conn_id from another USB enum. Used by dev_open(). Similar | |
373 | * to, and should be kept in sync with la2016_identify_enum(). | |
374 | */ | |
375 | static int la2016_open_enum(struct sr_dev_inst *sdi) | |
376 | { | |
377 | struct sr_dev_driver *di; | |
378 | struct drv_context *drvc; | |
379 | struct sr_context *ctx; | |
380 | libusb_device **devlist, *dev; | |
381 | struct libusb_device_descriptor des; | |
382 | int ret, open_ret; | |
383 | size_t device_count, dev_idx; | |
384 | char conn_id[64]; | |
385 | ||
386 | di = sdi->driver; | |
387 | drvc = di->context; | |
388 | ctx = drvc->sr_ctx;; | |
389 | ||
390 | ret = libusb_get_device_list(ctx->libusb_ctx, &devlist); | |
391 | if (ret < 0) | |
392 | return SR_ERR_IO; | |
393 | device_count = ret; | |
394 | if (!device_count) | |
395 | return SR_ERR_IO; | |
396 | open_ret = SR_ERR_IO; | |
397 | for (dev_idx = 0; dev_idx < device_count; dev_idx++) { | |
398 | dev = devlist[dev_idx]; | |
399 | libusb_get_device_descriptor(dev, &des); | |
400 | if (des.idVendor != LA2016_VID || des.idProduct != LA2016_PID) | |
401 | continue; | |
402 | if (des.iProduct != LA2016_IPRODUCT_INDEX) | |
403 | continue; | |
404 | ret = usb_get_port_path(dev, conn_id, sizeof(conn_id)); | |
405 | if (ret < 0) | |
406 | continue; | |
407 | if (strcmp(sdi->connection_id, conn_id) != 0) | |
408 | continue; | |
409 | open_ret = la2016_open_usb(sdi->conn, dev, TRUE); | |
410 | break; | |
411 | } | |
412 | libusb_free_device_list(devlist, 1); | |
413 | ||
414 | return open_ret; | |
415 | } | |
416 | ||
417 | static GSList *scan(struct sr_dev_driver *di, GSList *options) | |
418 | { | |
419 | struct drv_context *drvc; | |
420 | struct sr_context *ctx; | |
421 | struct dev_context *devc; | |
422 | struct sr_dev_inst *sdi; | |
423 | struct sr_usb_dev_inst *usb; | |
424 | struct sr_config *src; | |
425 | GSList *l; | |
426 | GSList *devices, *found_devices, *renum_devices; | |
427 | GSList *conn_devices; | |
428 | struct libusb_device_descriptor des; | |
429 | libusb_device **devlist, *dev; | |
430 | size_t dev_count, dev_idx, ch_idx; | |
431 | uint8_t bus, addr; | |
432 | uint16_t pid; | |
433 | const char *conn; | |
434 | const char *probe_names; | |
435 | char conn_id[64]; | |
436 | int ret; | |
437 | size_t ch_off, ch_max; | |
438 | struct sr_channel *ch; | |
439 | struct sr_channel_group *cg; | |
440 | ||
441 | drvc = di->context; | |
442 | ctx = drvc->sr_ctx;; | |
443 | ||
444 | conn = NULL; | |
445 | conn_devices = NULL; | |
446 | probe_names = NULL; | |
447 | for (l = options; l; l = l->next) { | |
448 | src = l->data; | |
449 | switch (src->key) { | |
450 | case SR_CONF_CONN: | |
451 | conn = g_variant_get_string(src->data, NULL); | |
452 | break; | |
453 | case SR_CONF_PROBE_NAMES: | |
454 | probe_names = g_variant_get_string(src->data, NULL); | |
455 | break; | |
456 | } | |
457 | } | |
458 | if (conn) | |
459 | conn_devices = sr_usb_find(ctx->libusb_ctx, conn); | |
460 | if (conn && !conn_devices) { | |
461 | sr_err("Cannot find the specified connection '%s'.", conn); | |
462 | return NULL; | |
463 | } | |
464 | ||
465 | /* | |
466 | * Find all LA2016 devices, optionally upload firmware to them. | |
467 | * Defer completion of sdi/devc creation until all (selected) | |
468 | * devices were found in a usable state, and their models got | |
469 | * identified which affect their feature set. It appears that | |
470 | * we cannot communicate to the device within the same USB enum | |
471 | * cycle, needs another USB enumeration after firmware upload. | |
472 | */ | |
473 | devices = NULL; | |
474 | found_devices = NULL; | |
475 | renum_devices = NULL; | |
476 | ret = libusb_get_device_list(ctx->libusb_ctx, &devlist); | |
477 | if (ret < 0) { | |
478 | sr_err("Cannot get device list: %s.", libusb_error_name(ret)); | |
479 | return devices; | |
480 | } | |
481 | dev_count = ret; | |
482 | for (dev_idx = 0; dev_idx < dev_count; dev_idx++) { | |
483 | dev = devlist[dev_idx]; | |
484 | bus = libusb_get_bus_number(dev); | |
485 | addr = libusb_get_device_address(dev); | |
486 | ||
487 | /* Filter by connection when externally specified. */ | |
488 | for (l = conn_devices; l; l = l->next) { | |
489 | usb = l->data; | |
490 | if (usb->bus == bus && usb->address == addr) | |
491 | break; | |
492 | } | |
493 | if (conn_devices && !l) { | |
494 | sr_spew("Bus %hhu, addr %hhu do not match specified filter.", | |
495 | bus, addr); | |
496 | continue; | |
497 | } | |
498 | ||
499 | /* Check USB VID:PID. Get the connection string. */ | |
500 | libusb_get_device_descriptor(dev, &des); | |
501 | if (des.idVendor != LA2016_VID || des.idProduct != LA2016_PID) | |
502 | continue; | |
503 | pid = des.idProduct; | |
504 | ret = usb_get_port_path(dev, conn_id, sizeof(conn_id)); | |
505 | if (ret < 0) | |
506 | continue; | |
507 | sr_dbg("USB enum found %04x:%04x at path %s, %d.%d.", | |
508 | des.idVendor, des.idProduct, conn_id, bus, addr); | |
509 | usb = sr_usb_dev_inst_new(bus, addr, NULL); | |
510 | ||
511 | sdi = g_malloc0(sizeof(*sdi)); | |
512 | sdi->driver = di; | |
513 | sdi->status = SR_ST_INITIALIZING; | |
514 | sdi->inst_type = SR_INST_USB; | |
515 | sdi->connection_id = g_strdup(conn_id); | |
516 | sdi->conn = usb; | |
517 | ||
518 | devc = g_malloc0(sizeof(*devc)); | |
519 | sdi->priv = devc; | |
520 | ||
521 | /* | |
522 | * Load MCU firmware if it is currently missing. Which | |
523 | * makes the device disappear and renumerate in USB. | |
524 | * We need to come back another time to communicate to | |
525 | * this device. | |
526 | */ | |
527 | devc->fw_uploaded = 0; | |
528 | devc->usb_pid = pid; | |
529 | if (des.iProduct != LA2016_IPRODUCT_INDEX) { | |
530 | sr_info("Uploading MCU firmware to '%s'.", conn_id); | |
531 | ret = la2016_upload_firmware(sdi, ctx, dev, FALSE); | |
532 | if (ret != SR_OK) { | |
533 | sr_err("MCU firmware upload failed."); | |
534 | kingst_la2016_free_sdi(sdi); | |
535 | continue; | |
536 | } | |
537 | devc->fw_uploaded = g_get_monotonic_time(); | |
538 | usb->address = 0xff; | |
539 | renum_devices = g_slist_append(renum_devices, sdi); | |
540 | continue; | |
541 | } else { | |
542 | ret = la2016_upload_firmware(sdi, NULL, NULL, TRUE); | |
543 | if (ret != SR_OK) { | |
544 | sr_err("MCU firmware filename check failed."); | |
545 | kingst_la2016_free_sdi(sdi); | |
546 | continue; | |
547 | } | |
548 | } | |
549 | ||
550 | /* | |
551 | * Communicate to the MCU firmware to access EEPROM data | |
552 | * which lets us identify the device type. Then stop, to | |
553 | * share remaining sdi/devc creation with those devices | |
554 | * which had their MCU firmware uploaded above and which | |
555 | * get revisited later. | |
556 | */ | |
557 | ret = la2016_identify_read(sdi, usb, dev, TRUE); | |
558 | if (ret != SR_OK || !devc->model) { | |
559 | sr_err("Unknown or unsupported device type."); | |
560 | kingst_la2016_free_sdi(sdi); | |
561 | continue; | |
562 | } | |
563 | found_devices = g_slist_append(found_devices, sdi); | |
564 | } | |
565 | libusb_free_device_list(devlist, 1); | |
566 | g_slist_free_full(conn_devices, sr_usb_dev_inst_free_cb); | |
567 | ||
568 | /* | |
569 | * Wait for devices to re-appear after firmware upload. Append | |
570 | * the yet unidentified device to the list of found devices, or | |
571 | * release the previously allocated sdi/devc. | |
572 | */ | |
573 | for (l = renum_devices; l; l = l->next) { | |
574 | sdi = l->data; | |
575 | devc = sdi->priv; | |
576 | ret = la2016_identify_wait(sdi); | |
577 | if (ret != SR_OK || !devc->model) { | |
578 | sr_dbg("Skipping unusable '%s'.", sdi->connection_id); | |
579 | kingst_la2016_free_sdi(sdi); | |
580 | continue; | |
581 | } | |
582 | found_devices = g_slist_append(found_devices, sdi); | |
583 | } | |
584 | g_slist_free(renum_devices); | |
585 | ||
586 | /* | |
587 | * All found devices got identified, their type is known here. | |
588 | * Complete the sdi/devc creation. Assign default settings | |
589 | * because the vendor firmware would not let us read back the | |
590 | * previously written configuration. | |
591 | */ | |
592 | for (l = found_devices; l; l = l->next) { | |
593 | sdi = l->data; | |
594 | devc = sdi->priv; | |
595 | ||
596 | sdi->vendor = g_strdup("Kingst"); | |
597 | sdi->model = g_strdup(devc->model->name); | |
598 | ch_off = 0; | |
599 | ||
600 | /* Create the "Logic" channel group. */ | |
601 | ch_max = ARRAY_SIZE(channel_names_logic); | |
602 | if (ch_max > devc->model->channel_count) | |
603 | ch_max = devc->model->channel_count; | |
604 | devc->channel_names_logic = sr_parse_probe_names(probe_names, | |
605 | channel_names_logic, ch_max, ch_max, &ch_max); | |
606 | cg = sr_channel_group_new(sdi, "Logic", NULL); | |
607 | devc->cg_logic = cg; | |
608 | for (ch_idx = 0; ch_idx < ch_max; ch_idx++) { | |
609 | ch = sr_channel_new(sdi, ch_off, | |
610 | SR_CHANNEL_LOGIC, TRUE, | |
611 | devc->channel_names_logic[ch_idx]); | |
612 | ch_off++; | |
613 | cg->channels = g_slist_append(cg->channels, ch); | |
614 | } | |
615 | ||
616 | /* Create the "PWMx" channel groups. */ | |
617 | ch_max = ARRAY_SIZE(channel_names_pwm); | |
618 | for (ch_idx = 0; ch_idx < ch_max; ch_idx++) { | |
619 | const char *name; | |
620 | name = channel_names_pwm[ch_idx]; | |
621 | cg = sr_channel_group_new(sdi, name, NULL); | |
622 | if (!devc->cg_pwm) | |
623 | devc->cg_pwm = cg; | |
624 | ch = sr_channel_new(sdi, ch_off, | |
625 | SR_CHANNEL_ANALOG, FALSE, name); | |
626 | ch_off++; | |
627 | cg->channels = g_slist_append(cg->channels, ch); | |
628 | } | |
629 | ||
630 | /* | |
631 | * Ideally we'd get the previous configuration from the | |
632 | * hardware, but this device is write-only. So we have | |
633 | * to assign a fixed set of initial configuration values. | |
634 | */ | |
635 | sr_sw_limits_init(&devc->sw_limits); | |
636 | devc->sw_limits.limit_samples = 0; | |
637 | devc->capture_ratio = 50; | |
638 | devc->samplerate = devc->model->samplerate; | |
639 | if (!devc->model->memory_bits) | |
640 | devc->continuous = TRUE; | |
641 | devc->threshold_voltage_idx = LOGIC_THRESHOLD_IDX_DFLT; | |
642 | if (ARRAY_SIZE(devc->pwm_setting) >= 1) { | |
643 | devc->pwm_setting[0].enabled = FALSE; | |
644 | devc->pwm_setting[0].freq = SR_KHZ(1); | |
645 | devc->pwm_setting[0].duty = 50; | |
646 | } | |
647 | if (ARRAY_SIZE(devc->pwm_setting) >= 2) { | |
648 | devc->pwm_setting[1].enabled = FALSE; | |
649 | devc->pwm_setting[1].freq = SR_KHZ(100); | |
650 | devc->pwm_setting[1].duty = 50; | |
651 | } | |
652 | ||
653 | sdi->status = SR_ST_INACTIVE; | |
654 | devices = g_slist_append(devices, sdi); | |
655 | } | |
656 | g_slist_free(found_devices); | |
657 | ||
658 | return std_scan_complete(di, devices); | |
659 | } | |
660 | ||
661 | static int dev_open(struct sr_dev_inst *sdi) | |
662 | { | |
663 | struct dev_context *devc; | |
664 | int ret; | |
665 | size_t ch; | |
666 | ||
667 | devc = sdi->priv; | |
668 | ||
669 | ret = la2016_open_enum(sdi); | |
670 | if (ret != SR_OK) { | |
671 | sr_err("Cannot open device."); | |
672 | return ret; | |
673 | } | |
674 | ||
675 | /* Send most recent PWM configuration to the device. */ | |
676 | for (ch = 0; ch < ARRAY_SIZE(devc->pwm_setting); ch++) { | |
677 | ret = la2016_write_pwm_config(sdi, ch); | |
678 | if (ret != SR_OK) | |
679 | return ret; | |
680 | } | |
681 | ||
682 | return SR_OK; | |
683 | } | |
684 | ||
685 | static int dev_close(struct sr_dev_inst *sdi) | |
686 | { | |
687 | struct sr_usb_dev_inst *usb; | |
688 | ||
689 | usb = sdi->conn; | |
690 | ||
691 | if (!usb->devhdl) | |
692 | return SR_ERR_BUG; | |
693 | ||
694 | la2016_release_resources(sdi); | |
695 | ||
696 | if (WITH_DEINIT_IN_CLOSE) | |
697 | la2016_deinit_hardware(sdi); | |
698 | ||
699 | sr_info("Closing device on %d.%d (logical) / %s (physical) interface %d.", | |
700 | usb->bus, usb->address, sdi->connection_id, USB_INTERFACE); | |
701 | la2016_close_usb(sdi->conn); | |
702 | ||
703 | return SR_OK; | |
704 | } | |
705 | ||
706 | /* Config API helper. Get type and index of a channel group. */ | |
707 | static int get_cg_index(const struct sr_dev_inst *sdi, | |
708 | const struct sr_channel_group *cg, | |
709 | int *type, size_t *logic, size_t *analog) | |
710 | { | |
711 | struct dev_context *devc; | |
712 | GSList *l; | |
713 | size_t idx; | |
714 | ||
715 | /* Preset return values. */ | |
716 | if (type) | |
717 | *type = 0; | |
718 | if (logic) | |
719 | *logic = 0; | |
720 | if (analog) | |
721 | *analog = 0; | |
722 | ||
723 | /* Start categorizing the received cg. */ | |
724 | if (!sdi) | |
725 | return SR_ERR_ARG; | |
726 | devc = sdi->priv; | |
727 | if (!cg) | |
728 | return SR_OK; | |
729 | l = sdi->channel_groups; | |
730 | ||
731 | /* First sdi->channelgroups item is "Logic". */ | |
732 | if (!l) | |
733 | return SR_ERR_BUG; | |
734 | if (cg == l->data) { | |
735 | if (type) | |
736 | *type = SR_CHANNEL_LOGIC; | |
737 | if (logic) | |
738 | *logic = 0; | |
739 | return SR_OK; | |
740 | } | |
741 | l = l->next; | |
742 | ||
743 | /* Next sdi->channelgroups items are "PWMx". */ | |
744 | idx = 0; | |
745 | while (l && l->data != cg) { | |
746 | idx++; | |
747 | l = l->next; | |
748 | } | |
749 | if (l && idx < ARRAY_SIZE(devc->pwm_setting)) { | |
750 | if (type) | |
751 | *type = SR_CHANNEL_ANALOG; | |
752 | if (analog) | |
753 | *analog = idx; | |
754 | return SR_OK; | |
755 | } | |
756 | ||
757 | return SR_ERR_ARG; | |
758 | } | |
759 | ||
760 | static int config_get(uint32_t key, GVariant **data, | |
761 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) | |
762 | { | |
763 | struct dev_context *devc; | |
764 | int ret, cg_type; | |
765 | size_t logic_idx, analog_idx; | |
766 | struct pwm_setting *pwm; | |
767 | struct sr_usb_dev_inst *usb; | |
768 | double voltage, rounded; | |
769 | ||
770 | (void)rounded; | |
771 | (void)voltage; | |
772 | ||
773 | if (!sdi) | |
774 | return SR_ERR_ARG; | |
775 | devc = sdi->priv; | |
776 | ||
777 | /* Check for types (and index) of channel groups. */ | |
778 | ret = get_cg_index(sdi, cg, &cg_type, &logic_idx, &analog_idx); | |
779 | if (cg && ret != SR_OK) | |
780 | return SR_ERR_ARG; | |
781 | ||
782 | /* Handle requests for the "Logic" channel group. */ | |
783 | if (cg && cg_type == SR_CHANNEL_LOGIC) { | |
784 | switch (key) { | |
785 | #if !WITH_THRESHOLD_DEVCFG | |
786 | case SR_CONF_VOLTAGE_THRESHOLD: | |
787 | voltage = threshold_voltage(sdi, NULL); | |
788 | *data = std_gvar_tuple_double(voltage, voltage); | |
789 | break; | |
790 | #endif /* WITH_THRESHOLD_DEVCFG */ | |
791 | default: | |
792 | return SR_ERR_NA; | |
793 | } | |
794 | return SR_OK; | |
795 | } | |
796 | ||
797 | /* Handle requests for the "PWMx" channel groups. */ | |
798 | if (cg && cg_type == SR_CHANNEL_ANALOG) { | |
799 | pwm = &devc->pwm_setting[analog_idx]; | |
800 | switch (key) { | |
801 | case SR_CONF_ENABLED: | |
802 | *data = g_variant_new_boolean(pwm->enabled); | |
803 | break; | |
804 | case SR_CONF_OUTPUT_FREQUENCY: | |
805 | *data = g_variant_new_double(pwm->freq); | |
806 | break; | |
807 | case SR_CONF_DUTY_CYCLE: | |
808 | *data = g_variant_new_double(pwm->duty); | |
809 | break; | |
810 | default: | |
811 | return SR_ERR_NA; | |
812 | } | |
813 | return SR_OK; | |
814 | } | |
815 | ||
816 | switch (key) { | |
817 | case SR_CONF_CONN: | |
818 | usb = sdi->conn; | |
819 | *data = g_variant_new_printf("%d.%d", usb->bus, usb->address); | |
820 | break; | |
821 | case SR_CONF_SAMPLERATE: | |
822 | *data = g_variant_new_uint64(devc->samplerate); | |
823 | break; | |
824 | case SR_CONF_LIMIT_SAMPLES: | |
825 | case SR_CONF_LIMIT_MSEC: | |
826 | return sr_sw_limits_config_get(&devc->sw_limits, key, data); | |
827 | case SR_CONF_CAPTURE_RATIO: | |
828 | *data = g_variant_new_uint64(devc->capture_ratio); | |
829 | break; | |
830 | #if WITH_THRESHOLD_DEVCFG | |
831 | case SR_CONF_VOLTAGE_THRESHOLD: | |
832 | voltage = threshold_voltage(sdi, NULL); | |
833 | *data = std_gvar_tuple_double(voltage, voltage); | |
834 | break; | |
835 | #endif /* WITH_THRESHOLD_DEVCFG */ | |
836 | case SR_CONF_CONTINUOUS: | |
837 | *data = g_variant_new_boolean(devc->continuous); | |
838 | break; | |
839 | default: | |
840 | return SR_ERR_NA; | |
841 | } | |
842 | ||
843 | return SR_OK; | |
844 | } | |
845 | ||
846 | static int config_set(uint32_t key, GVariant *data, | |
847 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) | |
848 | { | |
849 | struct dev_context *devc; | |
850 | int ret, cg_type; | |
851 | size_t logic_idx, analog_idx; | |
852 | struct pwm_setting *pwm; | |
853 | double value_f; | |
854 | int idx; | |
855 | gboolean on; | |
856 | ||
857 | devc = sdi->priv; | |
858 | ||
859 | /* Check for types (and index) of channel groups. */ | |
860 | ret = get_cg_index(sdi, cg, &cg_type, &logic_idx, &analog_idx); | |
861 | if (cg && ret != SR_OK) | |
862 | return SR_ERR_ARG; | |
863 | ||
864 | /* Handle requests for the "Logic" channel group. */ | |
865 | if (cg && cg_type == SR_CHANNEL_LOGIC) { | |
866 | switch (key) { | |
867 | #if !WITH_THRESHOLD_DEVCFG | |
868 | case SR_CONF_LOGIC_THRESHOLD: | |
869 | idx = std_double_tuple_idx(data, | |
870 | ARRAY_AND_SIZE(threshold_ranges)); | |
871 | if (idx < 0) | |
872 | return SR_ERR_ARG; | |
873 | devc->threshold_voltage_idx = idx; | |
874 | break; | |
875 | #endif /* WITH_THRESHOLD_DEVCFG */ | |
876 | default: | |
877 | return SR_ERR_NA; | |
878 | } | |
879 | return SR_OK; | |
880 | } | |
881 | ||
882 | /* Handle requests for the "PWMx" channel groups. */ | |
883 | if (cg && cg_type == SR_CHANNEL_ANALOG) { | |
884 | pwm = &devc->pwm_setting[analog_idx]; | |
885 | switch (key) { | |
886 | case SR_CONF_ENABLED: | |
887 | pwm->enabled = g_variant_get_boolean(data); | |
888 | ret = la2016_write_pwm_config(sdi, analog_idx); | |
889 | if (ret != SR_OK) | |
890 | return ret; | |
891 | break; | |
892 | case SR_CONF_OUTPUT_FREQUENCY: | |
893 | value_f = g_variant_get_double(data); | |
894 | if (value_f <= 0.0 || value_f > MAX_PWM_FREQ) | |
895 | return SR_ERR_ARG; | |
896 | pwm->freq = value_f; | |
897 | ret = la2016_write_pwm_config(sdi, analog_idx); | |
898 | if (ret != SR_OK) | |
899 | return ret; | |
900 | break; | |
901 | case SR_CONF_DUTY_CYCLE: | |
902 | value_f = g_variant_get_double(data); | |
903 | if (value_f <= 0.0 || value_f > 100.0) | |
904 | return SR_ERR_ARG; | |
905 | pwm->duty = value_f; | |
906 | ret = la2016_write_pwm_config(sdi, analog_idx); | |
907 | if (ret != SR_OK) | |
908 | return ret; | |
909 | break; | |
910 | default: | |
911 | return SR_ERR_NA; | |
912 | } | |
913 | return SR_OK; | |
914 | } | |
915 | ||
916 | switch (key) { | |
917 | case SR_CONF_SAMPLERATE: | |
918 | devc->samplerate = g_variant_get_uint64(data); | |
919 | break; | |
920 | case SR_CONF_LIMIT_SAMPLES: | |
921 | case SR_CONF_LIMIT_MSEC: | |
922 | return sr_sw_limits_config_set(&devc->sw_limits, key, data); | |
923 | case SR_CONF_CAPTURE_RATIO: | |
924 | devc->capture_ratio = g_variant_get_uint64(data); | |
925 | break; | |
926 | #if WITH_THRESHOLD_DEVCFG | |
927 | case SR_CONF_VOLTAGE_THRESHOLD: | |
928 | idx = std_double_tuple_idx(data, | |
929 | ARRAY_AND_SIZE(threshold_ranges)); | |
930 | if (idx < 0) | |
931 | return SR_ERR_ARG; | |
932 | devc->threshold_voltage_idx = idx; | |
933 | break; | |
934 | #endif /* WITH_THRESHOLD_DEVCFG */ | |
935 | case SR_CONF_CONTINUOUS: | |
936 | on = g_variant_get_boolean(data); | |
937 | if (!devc->model->memory_bits && !on) | |
938 | return SR_ERR_ARG; | |
939 | devc->continuous = on; | |
940 | break; | |
941 | default: | |
942 | return SR_ERR_NA; | |
943 | } | |
944 | ||
945 | return SR_OK; | |
946 | } | |
947 | ||
948 | static int config_list(uint32_t key, GVariant **data, | |
949 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) | |
950 | { | |
951 | struct dev_context *devc; | |
952 | int ret, cg_type; | |
953 | size_t logic_idx, analog_idx; | |
954 | ||
955 | devc = sdi ? sdi->priv : NULL; | |
956 | ||
957 | /* Check for types (and index) of channel groups. */ | |
958 | ret = get_cg_index(sdi, cg, &cg_type, &logic_idx, &analog_idx); | |
959 | if (cg && ret != SR_OK) | |
960 | return SR_ERR_ARG; | |
961 | ||
962 | /* Handle requests for the "Logic" channel group. */ | |
963 | if (cg && cg_type == SR_CHANNEL_LOGIC) { | |
964 | switch (key) { | |
965 | case SR_CONF_DEVICE_OPTIONS: | |
966 | if (ARRAY_SIZE(devopts_cg_logic) == 0) | |
967 | return SR_ERR_NA; | |
968 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, | |
969 | devopts_cg_logic, ARRAY_SIZE(devopts_cg_logic), | |
970 | sizeof(devopts_cg_logic[0])); | |
971 | break; | |
972 | #if !WITH_THRESHOLD_DEVCFG | |
973 | case SR_CONF_VOLTAGE_THRESHOLD: | |
974 | *data = std_gvar_thresholds(ARRAY_AND_SIZE(threshold_ranges)); | |
975 | break; | |
976 | #endif /* WITH_THRESHOLD_DEVCFG */ | |
977 | default: | |
978 | return SR_ERR_NA; | |
979 | } | |
980 | return SR_OK; | |
981 | } | |
982 | ||
983 | /* Handle requests for the "PWMx" channel groups. */ | |
984 | if (cg && cg_type == SR_CHANNEL_ANALOG) { | |
985 | switch (key) { | |
986 | case SR_CONF_DEVICE_OPTIONS: | |
987 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, | |
988 | devopts_cg_pwm, ARRAY_SIZE(devopts_cg_pwm), | |
989 | sizeof(devopts_cg_pwm[0])); | |
990 | break; | |
991 | default: | |
992 | return SR_ERR_NA; | |
993 | } | |
994 | return SR_OK; | |
995 | } | |
996 | ||
997 | switch (key) { | |
998 | case SR_CONF_SCAN_OPTIONS: | |
999 | case SR_CONF_DEVICE_OPTIONS: | |
1000 | return STD_CONFIG_LIST(key, data, sdi, cg, | |
1001 | scanopts, drvopts, devopts); | |
1002 | case SR_CONF_SAMPLERATE: | |
1003 | if (!sdi) | |
1004 | return SR_ERR_ARG; | |
1005 | if (devc->model->samplerate == SR_MHZ(500)) | |
1006 | *data = std_gvar_samplerates(ARRAY_AND_SIZE(rates_500mhz)); | |
1007 | else if (devc->model->samplerate == SR_MHZ(200)) | |
1008 | *data = std_gvar_samplerates(ARRAY_AND_SIZE(rates_200mhz)); | |
1009 | else if (devc->model->samplerate == SR_MHZ(100)) | |
1010 | *data = std_gvar_samplerates(ARRAY_AND_SIZE(rates_100mhz)); | |
1011 | else | |
1012 | return SR_ERR_BUG; | |
1013 | break; | |
1014 | case SR_CONF_LIMIT_SAMPLES: | |
1015 | *data = std_gvar_tuple_u64(0, LA2016_NUM_SAMPLES_MAX); | |
1016 | break; | |
1017 | #if WITH_THRESHOLD_DEVCFG | |
1018 | case SR_CONF_VOLTAGE_THRESHOLD: | |
1019 | *data = std_gvar_thresholds(ARRAY_AND_SIZE(threshold_ranges)); | |
1020 | break; | |
1021 | #endif /* WITH_THRESHOLD_DEVCFG */ | |
1022 | case SR_CONF_TRIGGER_MATCH: | |
1023 | *data = std_gvar_array_i32(ARRAY_AND_SIZE(trigger_matches)); | |
1024 | break; | |
1025 | default: | |
1026 | return SR_ERR_NA; | |
1027 | } | |
1028 | ||
1029 | return SR_OK; | |
1030 | } | |
1031 | ||
1032 | static int dev_acquisition_start(const struct sr_dev_inst *sdi) | |
1033 | { | |
1034 | struct sr_dev_driver *di; | |
1035 | struct drv_context *drvc; | |
1036 | struct sr_context *ctx; | |
1037 | struct dev_context *devc; | |
1038 | size_t unitsize, xfersize, repsize, seqsize; | |
1039 | double voltage; | |
1040 | int ret; | |
1041 | ||
1042 | di = sdi->driver; | |
1043 | drvc = di->context; | |
1044 | ctx = drvc->sr_ctx;; | |
1045 | devc = sdi->priv; | |
1046 | ||
1047 | if (!devc->feed_queue) { | |
1048 | /* | |
1049 | * TODO | |
1050 | * Move this into protocol.c which concentrates the | |
1051 | * wire format. The api.c source should not bother. | |
1052 | */ | |
1053 | if (devc->model->channel_count == 32) { | |
1054 | unitsize = sizeof(uint32_t); | |
1055 | repsize = sizeof(uint8_t); | |
1056 | seqsize = 2 * sizeof(uint8_t); | |
1057 | xfersize = 32; | |
1058 | } else if (devc->model->channel_count == 16) { | |
1059 | unitsize = sizeof(uint16_t); | |
1060 | repsize = sizeof(uint8_t); | |
1061 | seqsize = 1 * sizeof(uint8_t); | |
1062 | xfersize = 16; | |
1063 | } else { | |
1064 | return SR_ERR_ARG; | |
1065 | } | |
1066 | devc->feed_queue = feed_queue_logic_alloc(sdi, | |
1067 | LA2016_CONVBUFFER_SIZE, unitsize); | |
1068 | if (!devc->feed_queue) { | |
1069 | sr_err("Cannot allocate buffer for session feed."); | |
1070 | return SR_ERR_MALLOC; | |
1071 | } | |
1072 | devc->transfer_size = xfersize; | |
1073 | devc->sequence_size = seqsize; | |
1074 | devc->packets_per_chunk = xfersize; | |
1075 | devc->packets_per_chunk -= seqsize; | |
1076 | devc->packets_per_chunk /= unitsize + repsize; | |
1077 | } | |
1078 | ||
1079 | sr_sw_limits_acquisition_start(&devc->sw_limits); | |
1080 | ||
1081 | voltage = threshold_voltage(sdi, NULL); | |
1082 | ret = la2016_setup_acquisition(sdi, voltage); | |
1083 | if (ret != SR_OK) { | |
1084 | feed_queue_logic_free(devc->feed_queue); | |
1085 | devc->feed_queue = NULL; | |
1086 | return ret; | |
1087 | } | |
1088 | ||
1089 | ret = la2016_start_acquisition(sdi); | |
1090 | if (ret != SR_OK) { | |
1091 | la2016_abort_acquisition(sdi); | |
1092 | feed_queue_logic_free(devc->feed_queue); | |
1093 | devc->feed_queue = NULL; | |
1094 | return ret; | |
1095 | } | |
1096 | ||
1097 | devc->completion_seen = FALSE; | |
1098 | usb_source_add(sdi->session, ctx, 50, | |
1099 | la2016_receive_data, (void *)sdi); | |
1100 | ||
1101 | std_session_send_df_header(sdi); | |
1102 | ||
1103 | return SR_OK; | |
1104 | } | |
1105 | ||
1106 | static int dev_acquisition_stop(struct sr_dev_inst *sdi) | |
1107 | { | |
1108 | int ret; | |
1109 | ||
1110 | ret = la2016_abort_acquisition(sdi); | |
1111 | ||
1112 | return ret; | |
1113 | } | |
1114 | ||
1115 | static struct sr_dev_driver kingst_la2016_driver_info = { | |
1116 | .name = "kingst-la2016", | |
1117 | .longname = "Kingst LA2016", | |
1118 | .api_version = 1, | |
1119 | .init = std_init, | |
1120 | .cleanup = std_cleanup, | |
1121 | .scan = scan, | |
1122 | .dev_list = std_dev_list, | |
1123 | .dev_clear = std_dev_clear, | |
1124 | .config_get = config_get, | |
1125 | .config_set = config_set, | |
1126 | .config_list = config_list, | |
1127 | .dev_open = dev_open, | |
1128 | .dev_close = dev_close, | |
1129 | .dev_acquisition_start = dev_acquisition_start, | |
1130 | .dev_acquisition_stop = dev_acquisition_stop, | |
1131 | .context = NULL, | |
1132 | }; | |
1133 | SR_REGISTER_DEV_DRIVER(kingst_la2016_driver_info); |