]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2012 Bert Vermeulen <bert@biot.com> | |
5 | * | |
6 | * This program is free software: you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation, either version 3 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
18 | */ | |
19 | ||
20 | #include <config.h> | |
21 | #include <math.h> | |
22 | #include <stdio.h> | |
23 | #include <stdint.h> | |
24 | #include <stdlib.h> | |
25 | #include <sys/types.h> | |
26 | #include <sys/stat.h> | |
27 | #include <fcntl.h> | |
28 | #include <unistd.h> | |
29 | #include <string.h> | |
30 | #include <sys/time.h> | |
31 | #include <inttypes.h> | |
32 | #include <glib.h> | |
33 | #include <libusb.h> | |
34 | #include <libsigrok/libsigrok.h> | |
35 | #include "libsigrok-internal.h" | |
36 | #include "protocol.h" | |
37 | ||
38 | /* Max time in ms before we want to check on USB events */ | |
39 | /* TODO tune this properly */ | |
40 | #define TICK 1 | |
41 | ||
42 | #define NUM_TIMEBASE 10 | |
43 | #define NUM_VDIV 8 | |
44 | ||
45 | #define NUM_BUFFER_SIZES 2 | |
46 | ||
47 | static const uint32_t scanopts[] = { | |
48 | SR_CONF_CONN, | |
49 | }; | |
50 | ||
51 | static const uint32_t drvopts[] = { | |
52 | SR_CONF_OSCILLOSCOPE, | |
53 | }; | |
54 | ||
55 | static const uint32_t devopts[] = { | |
56 | SR_CONF_CONTINUOUS, | |
57 | SR_CONF_CONN | SR_CONF_GET, | |
58 | SR_CONF_LIMIT_FRAMES | SR_CONF_GET | SR_CONF_SET, | |
59 | SR_CONF_TIMEBASE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
60 | SR_CONF_NUM_HDIV | SR_CONF_GET, | |
61 | SR_CONF_CAPTURE_RATIO | SR_CONF_GET | SR_CONF_SET, | |
62 | SR_CONF_TRIGGER_SOURCE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
63 | SR_CONF_TRIGGER_SLOPE | SR_CONF_GET | SR_CONF_SET, | |
64 | SR_CONF_BUFFERSIZE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
65 | SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
66 | SR_CONF_NUM_VDIV | SR_CONF_GET, | |
67 | SR_CONF_TRIGGER_LEVEL | SR_CONF_GET | SR_CONF_SET, | |
68 | }; | |
69 | ||
70 | static const uint32_t devopts_cg[] = { | |
71 | SR_CONF_VDIV | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
72 | SR_CONF_COUPLING | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
73 | SR_CONF_FILTER | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
74 | }; | |
75 | ||
76 | static const char *channel_names[] = { | |
77 | "CH1", "CH2", | |
78 | }; | |
79 | ||
80 | static const uint64_t buffersizes_32k[] = { | |
81 | (10 * 1024), (32 * 1024), | |
82 | }; | |
83 | static const uint64_t buffersizes_512k[] = { | |
84 | (10 * 1024), (512 * 1024), | |
85 | }; | |
86 | static const uint64_t buffersizes_14k[] = { | |
87 | (10 * 1024), (14 * 1024), | |
88 | }; | |
89 | ||
90 | static const struct dso_profile dev_profiles[] = { | |
91 | { 0x04b4, 0x2090, 0x04b5, 0x2090, | |
92 | "Hantek", "DSO-2090", | |
93 | buffersizes_32k, | |
94 | "hantek-dso-2090.fw" }, | |
95 | { 0x04b4, 0x2150, 0x04b5, 0x2150, | |
96 | "Hantek", "DSO-2150", | |
97 | buffersizes_32k, | |
98 | "hantek-dso-2150.fw" }, | |
99 | { 0x04b4, 0x2250, 0x04b5, 0x2250, | |
100 | "Hantek", "DSO-2250", | |
101 | buffersizes_512k, | |
102 | "hantek-dso-2250.fw" }, | |
103 | { 0x04b4, 0x5200, 0x04b5, 0x5200, | |
104 | "Hantek", "DSO-5200", | |
105 | buffersizes_14k, | |
106 | "hantek-dso-5200.fw" }, | |
107 | { 0x04b4, 0x520a, 0x04b5, 0x520a, | |
108 | "Hantek", "DSO-5200A", | |
109 | buffersizes_512k, | |
110 | "hantek-dso-5200A.fw" }, | |
111 | ALL_ZERO | |
112 | }; | |
113 | ||
114 | static const uint64_t timebases[][2] = { | |
115 | /* microseconds */ | |
116 | { 10, 1000000 }, | |
117 | { 20, 1000000 }, | |
118 | { 40, 1000000 }, | |
119 | { 100, 1000000 }, | |
120 | { 200, 1000000 }, | |
121 | { 400, 1000000 }, | |
122 | /* milliseconds */ | |
123 | { 1, 1000 }, | |
124 | { 2, 1000 }, | |
125 | { 4, 1000 }, | |
126 | { 10, 1000 }, | |
127 | { 20, 1000 }, | |
128 | { 40, 1000 }, | |
129 | { 100, 1000 }, | |
130 | { 200, 1000 }, | |
131 | { 400, 1000 }, | |
132 | }; | |
133 | ||
134 | static const uint64_t samplerates[] = { | |
135 | SR_KHZ(20), | |
136 | SR_KHZ(25), | |
137 | SR_KHZ(50), | |
138 | SR_KHZ(100), | |
139 | SR_KHZ(200), | |
140 | SR_KHZ(250), | |
141 | SR_KHZ(500), | |
142 | SR_MHZ(1), | |
143 | SR_MHZ(2), | |
144 | SR_MHZ(5), | |
145 | SR_MHZ(10), | |
146 | SR_MHZ(20), | |
147 | SR_MHZ(25), | |
148 | SR_MHZ(50), | |
149 | SR_MHZ(100), | |
150 | SR_MHZ(125), | |
151 | /* Fast mode not supported yet. | |
152 | SR_MHZ(200), | |
153 | SR_MHZ(250), */ | |
154 | }; | |
155 | ||
156 | static const uint64_t vdivs[][2] = { | |
157 | /* millivolts */ | |
158 | { 10, 1000 }, | |
159 | { 20, 1000 }, | |
160 | { 50, 1000 }, | |
161 | { 100, 1000 }, | |
162 | { 200, 1000 }, | |
163 | { 500, 1000 }, | |
164 | /* volts */ | |
165 | { 1, 1 }, | |
166 | { 2, 1 }, | |
167 | { 5, 1 }, | |
168 | }; | |
169 | ||
170 | static const char *trigger_sources[] = { | |
171 | "CH1", "CH2", "EXT", | |
172 | /* TODO: forced */ | |
173 | }; | |
174 | ||
175 | static const char *trigger_slopes[] = { | |
176 | "r", "f", | |
177 | }; | |
178 | ||
179 | static const char *coupling[] = { | |
180 | "AC", "DC", "GND", | |
181 | }; | |
182 | ||
183 | static struct sr_dev_inst *dso_dev_new(const struct dso_profile *prof) | |
184 | { | |
185 | struct sr_dev_inst *sdi; | |
186 | struct sr_channel *ch; | |
187 | struct sr_channel_group *cg; | |
188 | struct dev_context *devc; | |
189 | unsigned int i; | |
190 | ||
191 | sdi = g_malloc0(sizeof(struct sr_dev_inst)); | |
192 | sdi->status = SR_ST_INITIALIZING; | |
193 | sdi->vendor = g_strdup(prof->vendor); | |
194 | sdi->model = g_strdup(prof->model); | |
195 | ||
196 | /* | |
197 | * Add only the real channels -- EXT isn't a source of data, only | |
198 | * a trigger source internal to the device. | |
199 | */ | |
200 | for (i = 0; i < ARRAY_SIZE(channel_names); i++) { | |
201 | ch = sr_channel_new(sdi, i, SR_CHANNEL_ANALOG, TRUE, channel_names[i]); | |
202 | cg = g_malloc0(sizeof(struct sr_channel_group)); | |
203 | cg->name = g_strdup(channel_names[i]); | |
204 | cg->channels = g_slist_append(cg->channels, ch); | |
205 | sdi->channel_groups = g_slist_append(sdi->channel_groups, cg); | |
206 | } | |
207 | ||
208 | devc = g_malloc0(sizeof(struct dev_context)); | |
209 | devc->profile = prof; | |
210 | devc->dev_state = IDLE; | |
211 | devc->timebase = DEFAULT_TIMEBASE; | |
212 | devc->samplerate = DEFAULT_SAMPLERATE; | |
213 | devc->ch_enabled[0] = TRUE; | |
214 | devc->ch_enabled[1] = TRUE; | |
215 | devc->voltage[0] = DEFAULT_VOLTAGE; | |
216 | devc->voltage[1] = DEFAULT_VOLTAGE; | |
217 | devc->coupling[0] = DEFAULT_COUPLING; | |
218 | devc->coupling[1] = DEFAULT_COUPLING; | |
219 | devc->voffset_ch1 = DEFAULT_VERT_OFFSET; | |
220 | devc->voffset_ch2 = DEFAULT_VERT_OFFSET; | |
221 | devc->voffset_trigger = DEFAULT_VERT_TRIGGERPOS; | |
222 | devc->framesize = DEFAULT_FRAMESIZE; | |
223 | devc->triggerslope = SLOPE_POSITIVE; | |
224 | devc->triggersource = g_strdup(DEFAULT_TRIGGER_SOURCE); | |
225 | devc->capture_ratio = DEFAULT_CAPTURE_RATIO; | |
226 | sdi->priv = devc; | |
227 | ||
228 | return sdi; | |
229 | } | |
230 | ||
231 | static int configure_channels(const struct sr_dev_inst *sdi) | |
232 | { | |
233 | struct dev_context *devc; | |
234 | struct sr_channel *ch; | |
235 | const GSList *l; | |
236 | int p; | |
237 | ||
238 | devc = sdi->priv; | |
239 | ||
240 | g_slist_free(devc->enabled_channels); | |
241 | devc->enabled_channels = NULL; | |
242 | devc->ch_enabled[0] = devc->ch_enabled[1] = FALSE; | |
243 | for (l = sdi->channels, p = 0; l; l = l->next, p++) { | |
244 | ch = l->data; | |
245 | if (p == 0) | |
246 | devc->ch_enabled[0] = ch->enabled; | |
247 | else | |
248 | devc->ch_enabled[1] = ch->enabled; | |
249 | if (ch->enabled) | |
250 | devc->enabled_channels = g_slist_append(devc->enabled_channels, ch); | |
251 | } | |
252 | ||
253 | return SR_OK; | |
254 | } | |
255 | ||
256 | static void clear_helper(struct dev_context *devc) | |
257 | { | |
258 | g_free(devc->triggersource); | |
259 | g_slist_free(devc->enabled_channels); | |
260 | } | |
261 | ||
262 | static int dev_clear(const struct sr_dev_driver *di) | |
263 | { | |
264 | return std_dev_clear_with_callback(di, (std_dev_clear_callback)clear_helper); | |
265 | } | |
266 | ||
267 | static GSList *scan(struct sr_dev_driver *di, GSList *options) | |
268 | { | |
269 | struct drv_context *drvc; | |
270 | struct dev_context *devc; | |
271 | struct sr_dev_inst *sdi; | |
272 | struct sr_usb_dev_inst *usb; | |
273 | struct sr_config *src; | |
274 | const struct dso_profile *prof; | |
275 | GSList *l, *devices, *conn_devices; | |
276 | struct libusb_device_descriptor des; | |
277 | libusb_device **devlist; | |
278 | int i, j; | |
279 | const char *conn; | |
280 | char connection_id[64]; | |
281 | ||
282 | drvc = di->context; | |
283 | ||
284 | devices = 0; | |
285 | ||
286 | conn = NULL; | |
287 | for (l = options; l; l = l->next) { | |
288 | src = l->data; | |
289 | if (src->key == SR_CONF_CONN) { | |
290 | conn = g_variant_get_string(src->data, NULL); | |
291 | break; | |
292 | } | |
293 | } | |
294 | if (conn) | |
295 | conn_devices = sr_usb_find(drvc->sr_ctx->libusb_ctx, conn); | |
296 | else | |
297 | conn_devices = NULL; | |
298 | ||
299 | /* Find all Hantek DSO devices and upload firmware to all of them. */ | |
300 | libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist); | |
301 | for (i = 0; devlist[i]; i++) { | |
302 | if (conn) { | |
303 | usb = NULL; | |
304 | for (l = conn_devices; l; l = l->next) { | |
305 | usb = l->data; | |
306 | if (usb->bus == libusb_get_bus_number(devlist[i]) | |
307 | && usb->address == libusb_get_device_address(devlist[i])) | |
308 | break; | |
309 | } | |
310 | if (!l) | |
311 | /* This device matched none of the ones that | |
312 | * matched the conn specification. */ | |
313 | continue; | |
314 | } | |
315 | ||
316 | libusb_get_device_descriptor(devlist[i], &des); | |
317 | ||
318 | if (usb_get_port_path(devlist[i], connection_id, sizeof(connection_id)) < 0) | |
319 | continue; | |
320 | ||
321 | prof = NULL; | |
322 | for (j = 0; dev_profiles[j].orig_vid; j++) { | |
323 | if (des.idVendor == dev_profiles[j].orig_vid | |
324 | && des.idProduct == dev_profiles[j].orig_pid) { | |
325 | /* Device matches the pre-firmware profile. */ | |
326 | prof = &dev_profiles[j]; | |
327 | sr_dbg("Found a %s %s.", prof->vendor, prof->model); | |
328 | sdi = dso_dev_new(prof); | |
329 | sdi->connection_id = g_strdup(connection_id); | |
330 | devices = g_slist_append(devices, sdi); | |
331 | devc = sdi->priv; | |
332 | if (ezusb_upload_firmware(drvc->sr_ctx, devlist[i], | |
333 | USB_CONFIGURATION, prof->firmware) == SR_OK) { | |
334 | /* Remember when the firmware on this device was updated */ | |
335 | devc->fw_updated = g_get_monotonic_time(); | |
336 | } else { | |
337 | sr_err("Firmware upload failed, name %s", prof->firmware); | |
338 | } | |
339 | /* Dummy USB address of 0xff will get overwritten later. */ | |
340 | sdi->conn = sr_usb_dev_inst_new( | |
341 | libusb_get_bus_number(devlist[i]), 0xff, NULL); | |
342 | break; | |
343 | } else if (des.idVendor == dev_profiles[j].fw_vid | |
344 | && des.idProduct == dev_profiles[j].fw_pid) { | |
345 | /* Device matches the post-firmware profile. */ | |
346 | prof = &dev_profiles[j]; | |
347 | sr_dbg("Found a %s %s.", prof->vendor, prof->model); | |
348 | sdi = dso_dev_new(prof); | |
349 | sdi->connection_id = g_strdup(connection_id); | |
350 | sdi->status = SR_ST_INACTIVE; | |
351 | devices = g_slist_append(devices, sdi); | |
352 | sdi->inst_type = SR_INST_USB; | |
353 | sdi->conn = sr_usb_dev_inst_new( | |
354 | libusb_get_bus_number(devlist[i]), | |
355 | libusb_get_device_address(devlist[i]), NULL); | |
356 | break; | |
357 | } | |
358 | } | |
359 | if (!prof) | |
360 | /* not a supported VID/PID */ | |
361 | continue; | |
362 | } | |
363 | libusb_free_device_list(devlist, 1); | |
364 | ||
365 | return std_scan_complete(di, devices); | |
366 | } | |
367 | ||
368 | static int dev_open(struct sr_dev_inst *sdi) | |
369 | { | |
370 | struct dev_context *devc; | |
371 | struct sr_usb_dev_inst *usb; | |
372 | int64_t timediff_us, timediff_ms; | |
373 | int err; | |
374 | ||
375 | devc = sdi->priv; | |
376 | usb = sdi->conn; | |
377 | ||
378 | /* | |
379 | * If the firmware was recently uploaded, wait up to MAX_RENUM_DELAY_MS | |
380 | * for the FX2 to renumerate. | |
381 | */ | |
382 | err = SR_ERR; | |
383 | if (devc->fw_updated > 0) { | |
384 | sr_info("Waiting for device to reset."); | |
385 | /* Takes >= 300ms for the FX2 to be gone from the USB bus. */ | |
386 | g_usleep(300 * 1000); | |
387 | timediff_ms = 0; | |
388 | while (timediff_ms < MAX_RENUM_DELAY_MS) { | |
389 | if ((err = dso_open(sdi)) == SR_OK) | |
390 | break; | |
391 | g_usleep(100 * 1000); | |
392 | timediff_us = g_get_monotonic_time() - devc->fw_updated; | |
393 | timediff_ms = timediff_us / 1000; | |
394 | sr_spew("Waited %" PRIi64 " ms.", timediff_ms); | |
395 | } | |
396 | sr_info("Device came back after %" PRIi64 " ms.", timediff_ms); | |
397 | } else { | |
398 | err = dso_open(sdi); | |
399 | } | |
400 | ||
401 | if (err != SR_OK) { | |
402 | sr_err("Unable to open device."); | |
403 | return SR_ERR; | |
404 | } | |
405 | ||
406 | err = libusb_claim_interface(usb->devhdl, USB_INTERFACE); | |
407 | if (err != 0) { | |
408 | sr_err("Unable to claim interface: %s.", | |
409 | libusb_error_name(err)); | |
410 | return SR_ERR; | |
411 | } | |
412 | ||
413 | return SR_OK; | |
414 | } | |
415 | ||
416 | static int dev_close(struct sr_dev_inst *sdi) | |
417 | { | |
418 | dso_close(sdi); | |
419 | ||
420 | return SR_OK; | |
421 | } | |
422 | ||
423 | static int config_get(uint32_t key, GVariant **data, | |
424 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) | |
425 | { | |
426 | struct dev_context *devc; | |
427 | struct sr_usb_dev_inst *usb; | |
428 | const char *s; | |
429 | const uint64_t *vdiv; | |
430 | int ch_idx; | |
431 | ||
432 | switch (key) { | |
433 | case SR_CONF_NUM_HDIV: | |
434 | *data = g_variant_new_int32(NUM_TIMEBASE); | |
435 | break; | |
436 | case SR_CONF_NUM_VDIV: | |
437 | *data = g_variant_new_int32(NUM_VDIV); | |
438 | break; | |
439 | } | |
440 | ||
441 | if (!sdi) | |
442 | return SR_ERR_ARG; | |
443 | ||
444 | devc = sdi->priv; | |
445 | if (!cg) { | |
446 | switch (key) { | |
447 | case SR_CONF_TRIGGER_LEVEL: | |
448 | *data = g_variant_new_double(devc->voffset_trigger); | |
449 | break; | |
450 | case SR_CONF_CONN: | |
451 | if (!sdi->conn) | |
452 | return SR_ERR_ARG; | |
453 | usb = sdi->conn; | |
454 | if (usb->address == 255) | |
455 | /* Device still needs to re-enumerate after firmware | |
456 | * upload, so we don't know its (future) address. */ | |
457 | return SR_ERR; | |
458 | *data = g_variant_new_printf("%d.%d", usb->bus, usb->address); | |
459 | break; | |
460 | case SR_CONF_TIMEBASE: | |
461 | *data = g_variant_new("(tt)", timebases[devc->timebase][0], | |
462 | timebases[devc->timebase][1]); | |
463 | break; | |
464 | case SR_CONF_SAMPLERATE: | |
465 | *data = g_variant_new_uint64(devc->samplerate); | |
466 | break; | |
467 | case SR_CONF_BUFFERSIZE: | |
468 | *data = g_variant_new_uint64(devc->framesize); | |
469 | break; | |
470 | case SR_CONF_TRIGGER_SOURCE: | |
471 | *data = g_variant_new_string(devc->triggersource); | |
472 | break; | |
473 | case SR_CONF_TRIGGER_SLOPE: | |
474 | s = (devc->triggerslope == SLOPE_POSITIVE) ? "r" : "f"; | |
475 | *data = g_variant_new_string(s); | |
476 | break; | |
477 | case SR_CONF_CAPTURE_RATIO: | |
478 | *data = g_variant_new_uint64(devc->capture_ratio); | |
479 | break; | |
480 | case SR_CONF_LIMIT_FRAMES: | |
481 | *data = g_variant_new_uint64(devc->limit_frames); | |
482 | break; | |
483 | default: | |
484 | return SR_ERR_NA; | |
485 | } | |
486 | } else { | |
487 | if (sdi->channel_groups->data == cg) | |
488 | ch_idx = 0; | |
489 | else if (sdi->channel_groups->next->data == cg) | |
490 | ch_idx = 1; | |
491 | else | |
492 | return SR_ERR_ARG; | |
493 | switch (key) { | |
494 | case SR_CONF_FILTER: | |
495 | *data = g_variant_new_boolean(devc->filter[ch_idx]); | |
496 | break; | |
497 | case SR_CONF_VDIV: | |
498 | vdiv = vdivs[devc->voltage[ch_idx]]; | |
499 | *data = g_variant_new("(tt)", vdiv[0], vdiv[1]); | |
500 | break; | |
501 | case SR_CONF_COUPLING: | |
502 | *data = g_variant_new_string(coupling[devc->coupling[ch_idx]]); | |
503 | break; | |
504 | } | |
505 | } | |
506 | ||
507 | return SR_OK; | |
508 | } | |
509 | ||
510 | static int config_set(uint32_t key, GVariant *data, | |
511 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) | |
512 | { | |
513 | struct dev_context *devc; | |
514 | int ch_idx, idx; | |
515 | float flt; | |
516 | ||
517 | devc = sdi->priv; | |
518 | if (!cg) { | |
519 | switch (key) { | |
520 | case SR_CONF_LIMIT_FRAMES: | |
521 | devc->limit_frames = g_variant_get_uint64(data); | |
522 | break; | |
523 | case SR_CONF_TRIGGER_LEVEL: | |
524 | flt = g_variant_get_double(data); | |
525 | if (flt < 0.0 || flt > 1.0) { | |
526 | sr_err("Trigger level must be in [0.0,1.0]."); | |
527 | return SR_ERR_ARG; | |
528 | } | |
529 | devc->voffset_trigger = flt; | |
530 | if (dso_set_voffsets(sdi) != SR_OK) | |
531 | return SR_ERR; | |
532 | break; | |
533 | case SR_CONF_TRIGGER_SLOPE: | |
534 | if ((idx = std_str_idx(data, ARRAY_AND_SIZE(trigger_slopes))) < 0) | |
535 | return SR_ERR_ARG; | |
536 | devc->triggerslope = idx; | |
537 | break; | |
538 | case SR_CONF_CAPTURE_RATIO: | |
539 | devc->capture_ratio = g_variant_get_uint64(data); | |
540 | break; | |
541 | case SR_CONF_BUFFERSIZE: | |
542 | if ((idx = std_u64_idx(data, devc->profile->buffersizes, NUM_BUFFER_SIZES)) < 0) | |
543 | return SR_ERR_ARG; | |
544 | devc->framesize = devc->profile->buffersizes[idx]; | |
545 | break; | |
546 | case SR_CONF_TIMEBASE: | |
547 | if ((idx = std_u64_tuple_idx(data, ARRAY_AND_SIZE(timebases))) < 0) | |
548 | return SR_ERR_ARG; | |
549 | devc->timebase = idx; | |
550 | break; | |
551 | case SR_CONF_SAMPLERATE: | |
552 | if ((idx = std_u64_idx(data, ARRAY_AND_SIZE(samplerates))) < 0) | |
553 | return SR_ERR_ARG; | |
554 | devc->samplerate = samplerates[idx]; | |
555 | if (dso_set_trigger_samplerate(sdi) != SR_OK) | |
556 | return SR_ERR; | |
557 | break; | |
558 | case SR_CONF_TRIGGER_SOURCE: | |
559 | if ((idx = std_str_idx(data, ARRAY_AND_SIZE(trigger_sources))) < 0) | |
560 | return SR_ERR_ARG; | |
561 | devc->triggersource = g_strdup(trigger_sources[idx]); | |
562 | break; | |
563 | default: | |
564 | return SR_ERR_NA; | |
565 | } | |
566 | } else { | |
567 | if (sdi->channel_groups->data == cg) | |
568 | ch_idx = 0; | |
569 | else if (sdi->channel_groups->next->data == cg) | |
570 | ch_idx = 1; | |
571 | else | |
572 | return SR_ERR_ARG; | |
573 | switch (key) { | |
574 | case SR_CONF_FILTER: | |
575 | devc->filter[ch_idx] = g_variant_get_boolean(data); | |
576 | break; | |
577 | case SR_CONF_VDIV: | |
578 | if ((idx = std_u64_tuple_idx(data, ARRAY_AND_SIZE(vdivs))) < 0) | |
579 | return SR_ERR_ARG; | |
580 | devc->voltage[ch_idx] = idx; | |
581 | break; | |
582 | case SR_CONF_COUPLING: | |
583 | if ((idx = std_str_idx(data, ARRAY_AND_SIZE(coupling))) < 0) | |
584 | return SR_ERR_ARG; | |
585 | devc->coupling[ch_idx] = idx; | |
586 | break; | |
587 | default: | |
588 | return SR_ERR_NA; | |
589 | } | |
590 | } | |
591 | ||
592 | return SR_OK; | |
593 | } | |
594 | ||
595 | static int config_list(uint32_t key, GVariant **data, | |
596 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) | |
597 | { | |
598 | struct dev_context *devc; | |
599 | ||
600 | if (!cg) { | |
601 | switch (key) { | |
602 | case SR_CONF_SCAN_OPTIONS: | |
603 | case SR_CONF_DEVICE_OPTIONS: | |
604 | return STD_CONFIG_LIST(key, data, sdi, cg, scanopts, drvopts, devopts); | |
605 | case SR_CONF_BUFFERSIZE: | |
606 | if (!sdi) | |
607 | return SR_ERR_ARG; | |
608 | devc = sdi->priv; | |
609 | *data = std_gvar_array_u64(devc->profile->buffersizes, NUM_BUFFER_SIZES); | |
610 | break; | |
611 | case SR_CONF_SAMPLERATE: | |
612 | *data = std_gvar_samplerates(ARRAY_AND_SIZE(samplerates)); | |
613 | break; | |
614 | case SR_CONF_TIMEBASE: | |
615 | *data = std_gvar_tuple_array(ARRAY_AND_SIZE(timebases)); | |
616 | break; | |
617 | case SR_CONF_TRIGGER_SOURCE: | |
618 | *data = g_variant_new_strv(ARRAY_AND_SIZE(trigger_sources)); | |
619 | break; | |
620 | case SR_CONF_TRIGGER_SLOPE: | |
621 | *data = g_variant_new_strv(ARRAY_AND_SIZE(trigger_slopes)); | |
622 | break; | |
623 | default: | |
624 | return SR_ERR_NA; | |
625 | } | |
626 | } else { | |
627 | switch (key) { | |
628 | case SR_CONF_DEVICE_OPTIONS: | |
629 | *data = std_gvar_array_u32(ARRAY_AND_SIZE(devopts_cg)); | |
630 | break; | |
631 | case SR_CONF_COUPLING: | |
632 | *data = g_variant_new_strv(ARRAY_AND_SIZE(coupling)); | |
633 | break; | |
634 | case SR_CONF_VDIV: | |
635 | *data = std_gvar_tuple_array(ARRAY_AND_SIZE(vdivs)); | |
636 | break; | |
637 | default: | |
638 | return SR_ERR_NA; | |
639 | } | |
640 | } | |
641 | ||
642 | return SR_OK; | |
643 | } | |
644 | ||
645 | static void send_chunk(struct sr_dev_inst *sdi, unsigned char *buf, | |
646 | int num_samples) | |
647 | { | |
648 | struct sr_datafeed_packet packet; | |
649 | struct sr_datafeed_analog analog; | |
650 | struct sr_analog_encoding encoding; | |
651 | struct sr_analog_meaning meaning; | |
652 | struct sr_analog_spec spec; | |
653 | struct dev_context *devc = sdi->priv; | |
654 | GSList *channels = devc->enabled_channels; | |
655 | ||
656 | packet.type = SR_DF_ANALOG; | |
657 | packet.payload = &analog; | |
658 | /* TODO: support for 5xxx series 9-bit samples */ | |
659 | sr_analog_init(&analog, &encoding, &meaning, &spec, 0); | |
660 | analog.num_samples = num_samples; | |
661 | analog.meaning->mq = SR_MQ_VOLTAGE; | |
662 | analog.meaning->unit = SR_UNIT_VOLT; | |
663 | analog.meaning->mqflags = 0; | |
664 | /* TODO: Check malloc return value. */ | |
665 | analog.data = g_try_malloc(num_samples * sizeof(float)); | |
666 | ||
667 | for (int ch = 0; ch < NUM_CHANNELS; ch++) { | |
668 | if (!devc->ch_enabled[ch]) | |
669 | continue; | |
670 | ||
671 | float range = ((float)vdivs[devc->voltage[ch]][0] / vdivs[devc->voltage[ch]][1]) * 8; | |
672 | float vdivlog = log10f(range / 255); | |
673 | int digits = -(int)vdivlog + (vdivlog < 0.0); | |
674 | analog.encoding->digits = digits; | |
675 | analog.spec->spec_digits = digits; | |
676 | analog.meaning->channels = g_slist_append(NULL, channels->data); | |
677 | ||
678 | for (int i = 0; i < num_samples; i++) { | |
679 | /* | |
680 | * The device always sends data for both channels. If a channel | |
681 | * is disabled, it contains a copy of the enabled channel's | |
682 | * data. However, we only send the requested channels to | |
683 | * the bus. | |
684 | * | |
685 | * Voltage values are encoded as a value 0-255 (0-512 on the | |
686 | * DSO-5200*), where the value is a point in the range | |
687 | * represented by the vdiv setting. There are 8 vertical divs, | |
688 | * so e.g. 500mV/div represents 4V peak-to-peak where 0 = -2V | |
689 | * and 255 = +2V. | |
690 | */ | |
691 | /* TODO: Support for DSO-5xxx series 9-bit samples. */ | |
692 | ((float *)analog.data)[i] = range / 255 * *(buf + i * 2 + 1 - ch) - range / 2; | |
693 | } | |
694 | sr_session_send(sdi, &packet); | |
695 | g_slist_free(analog.meaning->channels); | |
696 | ||
697 | channels = channels->next; | |
698 | } | |
699 | g_free(analog.data); | |
700 | } | |
701 | ||
702 | /* | |
703 | * Called by libusb (as triggered by handle_event()) when a transfer comes in. | |
704 | * Only channel data comes in asynchronously, and all transfers for this are | |
705 | * queued up beforehand, so this just needs to chuck the incoming data onto | |
706 | * the libsigrok session bus. | |
707 | */ | |
708 | static void LIBUSB_CALL receive_transfer(struct libusb_transfer *transfer) | |
709 | { | |
710 | struct sr_dev_inst *sdi; | |
711 | struct dev_context *devc; | |
712 | int num_samples, pre; | |
713 | ||
714 | sdi = transfer->user_data; | |
715 | devc = sdi->priv; | |
716 | sr_spew("receive_transfer(): status %s received %d bytes.", | |
717 | libusb_error_name(transfer->status), transfer->actual_length); | |
718 | ||
719 | if (transfer->actual_length == 0) | |
720 | /* Nothing to send to the bus. */ | |
721 | return; | |
722 | ||
723 | num_samples = transfer->actual_length / 2; | |
724 | ||
725 | sr_spew("Got %d-%d/%d samples in frame.", devc->samp_received + 1, | |
726 | devc->samp_received + num_samples, devc->framesize); | |
727 | ||
728 | /* | |
729 | * The device always sends a full frame, but the beginning of the frame | |
730 | * doesn't represent the trigger point. The offset at which the trigger | |
731 | * happened came in with the capture state, so we need to start sending | |
732 | * from there up the session bus. The samples in the frame buffer | |
733 | * before that trigger point came after the end of the device's frame | |
734 | * buffer was reached, and it wrapped around to overwrite up until the | |
735 | * trigger point. | |
736 | */ | |
737 | if (devc->samp_received < devc->trigger_offset) { | |
738 | /* Trigger point not yet reached. */ | |
739 | if (devc->samp_received + num_samples < devc->trigger_offset) { | |
740 | /* The entire chunk is before the trigger point. */ | |
741 | memcpy(devc->framebuf + devc->samp_buffered * 2, | |
742 | transfer->buffer, num_samples * 2); | |
743 | devc->samp_buffered += num_samples; | |
744 | } else { | |
745 | /* | |
746 | * This chunk hits or overruns the trigger point. | |
747 | * Store the part before the trigger fired, and | |
748 | * send the rest up to the session bus. | |
749 | */ | |
750 | pre = devc->trigger_offset - devc->samp_received; | |
751 | memcpy(devc->framebuf + devc->samp_buffered * 2, | |
752 | transfer->buffer, pre * 2); | |
753 | devc->samp_buffered += pre; | |
754 | ||
755 | /* The rest of this chunk starts with the trigger point. */ | |
756 | sr_dbg("Reached trigger point, %d samples buffered.", | |
757 | devc->samp_buffered); | |
758 | ||
759 | /* Avoid the corner case where the chunk ended at | |
760 | * exactly the trigger point. */ | |
761 | if (num_samples > pre) | |
762 | send_chunk(sdi, transfer->buffer + pre * 2, | |
763 | num_samples - pre); | |
764 | } | |
765 | } else { | |
766 | /* Already past the trigger point, just send it all out. */ | |
767 | send_chunk(sdi, transfer->buffer, num_samples); | |
768 | } | |
769 | ||
770 | devc->samp_received += num_samples; | |
771 | ||
772 | /* Everything in this transfer was either copied to the buffer or | |
773 | * sent to the session bus. */ | |
774 | g_free(transfer->buffer); | |
775 | libusb_free_transfer(transfer); | |
776 | ||
777 | if (devc->samp_received >= devc->framesize) { | |
778 | /* That was the last chunk in this frame. Send the buffered | |
779 | * pre-trigger samples out now, in one big chunk. */ | |
780 | sr_dbg("End of frame, sending %d pre-trigger buffered samples.", | |
781 | devc->samp_buffered); | |
782 | send_chunk(sdi, devc->framebuf, devc->samp_buffered); | |
783 | g_free(devc->framebuf); | |
784 | devc->framebuf = NULL; | |
785 | ||
786 | /* Mark the end of this frame. */ | |
787 | std_session_send_df_frame_end(sdi); | |
788 | ||
789 | if (devc->limit_frames && ++devc->num_frames >= devc->limit_frames) { | |
790 | /* Terminate session */ | |
791 | devc->dev_state = STOPPING; | |
792 | } else { | |
793 | devc->dev_state = NEW_CAPTURE; | |
794 | } | |
795 | } | |
796 | } | |
797 | ||
798 | static int handle_event(int fd, int revents, void *cb_data) | |
799 | { | |
800 | const struct sr_dev_inst *sdi; | |
801 | struct timeval tv; | |
802 | struct sr_dev_driver *di; | |
803 | struct dev_context *devc; | |
804 | struct drv_context *drvc; | |
805 | int num_channels; | |
806 | uint32_t trigger_offset; | |
807 | uint8_t capturestate; | |
808 | ||
809 | (void)fd; | |
810 | (void)revents; | |
811 | ||
812 | sdi = cb_data; | |
813 | di = sdi->driver; | |
814 | drvc = di->context; | |
815 | devc = sdi->priv; | |
816 | if (devc->dev_state == STOPPING) { | |
817 | /* We've been told to wind up the acquisition. */ | |
818 | sr_dbg("Stopping acquisition."); | |
819 | /* | |
820 | * TODO: Doesn't really cancel pending transfers so they might | |
821 | * come in after SR_DF_END is sent. | |
822 | */ | |
823 | usb_source_remove(sdi->session, drvc->sr_ctx); | |
824 | ||
825 | std_session_send_df_end(sdi); | |
826 | ||
827 | devc->dev_state = IDLE; | |
828 | ||
829 | return TRUE; | |
830 | } | |
831 | ||
832 | /* Always handle pending libusb events. */ | |
833 | tv.tv_sec = tv.tv_usec = 0; | |
834 | libusb_handle_events_timeout(drvc->sr_ctx->libusb_ctx, &tv); | |
835 | ||
836 | /* TODO: ugh */ | |
837 | if (devc->dev_state == NEW_CAPTURE) { | |
838 | if (dso_capture_start(sdi) != SR_OK) | |
839 | return TRUE; | |
840 | if (dso_enable_trigger(sdi) != SR_OK) | |
841 | return TRUE; | |
842 | // if (dso_force_trigger(sdi) != SR_OK) | |
843 | // return TRUE; | |
844 | sr_dbg("Successfully requested next chunk."); | |
845 | devc->dev_state = CAPTURE; | |
846 | return TRUE; | |
847 | } | |
848 | if (devc->dev_state != CAPTURE) | |
849 | return TRUE; | |
850 | ||
851 | if ((dso_get_capturestate(sdi, &capturestate, &trigger_offset)) != SR_OK) | |
852 | return TRUE; | |
853 | ||
854 | sr_dbg("Capturestate %d.", capturestate); | |
855 | sr_dbg("Trigger offset 0x%.6x.", trigger_offset); | |
856 | switch (capturestate) { | |
857 | case CAPTURE_EMPTY: | |
858 | if (++devc->capture_empty_count >= MAX_CAPTURE_EMPTY) { | |
859 | devc->capture_empty_count = 0; | |
860 | if (dso_capture_start(sdi) != SR_OK) | |
861 | break; | |
862 | if (dso_enable_trigger(sdi) != SR_OK) | |
863 | break; | |
864 | // if (dso_force_trigger(sdi) != SR_OK) | |
865 | // break; | |
866 | sr_dbg("Successfully requested next chunk."); | |
867 | } | |
868 | break; | |
869 | case CAPTURE_FILLING: | |
870 | /* No data yet. */ | |
871 | break; | |
872 | case CAPTURE_READY_8BIT: | |
873 | case CAPTURE_READY_2250: | |
874 | /* Remember where in the captured frame the trigger is. */ | |
875 | devc->trigger_offset = trigger_offset; | |
876 | ||
877 | num_channels = (devc->ch_enabled[0] && devc->ch_enabled[1]) ? 2 : 1; | |
878 | devc->framebuf = g_malloc(devc->framesize * num_channels * 2); | |
879 | devc->samp_buffered = devc->samp_received = 0; | |
880 | ||
881 | /* Tell the scope to send us the first frame. */ | |
882 | if (dso_get_channeldata(sdi, receive_transfer) != SR_OK) | |
883 | break; | |
884 | ||
885 | /* | |
886 | * Don't hit the state machine again until we're done fetching | |
887 | * the data we just told the scope to send. | |
888 | */ | |
889 | devc->dev_state = FETCH_DATA; | |
890 | ||
891 | /* Tell the frontend a new frame is on the way. */ | |
892 | std_session_send_df_frame_begin(sdi); | |
893 | break; | |
894 | case CAPTURE_READY_9BIT: | |
895 | /* TODO */ | |
896 | sr_err("Not yet supported."); | |
897 | break; | |
898 | case CAPTURE_TIMEOUT: | |
899 | /* Doesn't matter, we'll try again next time. */ | |
900 | break; | |
901 | default: | |
902 | sr_dbg("Unknown capture state: %d.", capturestate); | |
903 | break; | |
904 | } | |
905 | ||
906 | return TRUE; | |
907 | } | |
908 | ||
909 | static int dev_acquisition_start(const struct sr_dev_inst *sdi) | |
910 | { | |
911 | struct dev_context *devc; | |
912 | struct sr_dev_driver *di = sdi->driver; | |
913 | struct drv_context *drvc = di->context; | |
914 | ||
915 | devc = sdi->priv; | |
916 | ||
917 | if (configure_channels(sdi) != SR_OK) { | |
918 | sr_err("Failed to configure channels."); | |
919 | return SR_ERR; | |
920 | } | |
921 | ||
922 | if (dso_init(sdi) != SR_OK) | |
923 | return SR_ERR; | |
924 | ||
925 | if (dso_capture_start(sdi) != SR_OK) | |
926 | return SR_ERR; | |
927 | ||
928 | devc->dev_state = CAPTURE; | |
929 | usb_source_add(sdi->session, drvc->sr_ctx, TICK, handle_event, (void *)sdi); | |
930 | ||
931 | std_session_send_df_header(sdi); | |
932 | ||
933 | return SR_OK; | |
934 | } | |
935 | ||
936 | static int dev_acquisition_stop(struct sr_dev_inst *sdi) | |
937 | { | |
938 | struct dev_context *devc; | |
939 | ||
940 | devc = sdi->priv; | |
941 | devc->dev_state = STOPPING; | |
942 | devc->num_frames = 0; | |
943 | ||
944 | return SR_OK; | |
945 | } | |
946 | ||
947 | static struct sr_dev_driver hantek_dso_driver_info = { | |
948 | .name = "hantek-dso", | |
949 | .longname = "Hantek DSO", | |
950 | .api_version = 1, | |
951 | .init = std_init, | |
952 | .cleanup = std_cleanup, | |
953 | .scan = scan, | |
954 | .dev_list = std_dev_list, | |
955 | .dev_clear = dev_clear, | |
956 | .config_get = config_get, | |
957 | .config_set = config_set, | |
958 | .config_list = config_list, | |
959 | .dev_open = dev_open, | |
960 | .dev_close = dev_close, | |
961 | .dev_acquisition_start = dev_acquisition_start, | |
962 | .dev_acquisition_stop = dev_acquisition_stop, | |
963 | .context = NULL, | |
964 | }; | |
965 | SR_REGISTER_DEV_DRIVER(hantek_dso_driver_info); |