]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2016 Andreas Zschunke <andreas.zschunke@gmx.net> | |
5 | * Copyright (C) 2017 Andrej Valek <andy@skyrain.eu> | |
6 | * Copyright (C) 2017 Uwe Hermann <uwe@hermann-uwe.de> | |
7 | * | |
8 | * This program is free software: you can redistribute it and/or modify | |
9 | * it under the terms of the GNU General Public License as published by | |
10 | * the Free Software Foundation, either version 3 of the License, or | |
11 | * (at your option) any later version. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, | |
14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | * GNU General Public License for more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License | |
19 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
20 | */ | |
21 | ||
22 | #include <config.h> | |
23 | #include "protocol.h" | |
24 | ||
25 | #define USB_INTERFACE 0 | |
26 | #define NUM_CHANNELS 32 | |
27 | ||
28 | static const uint32_t scanopts[] = { | |
29 | SR_CONF_CONN, | |
30 | }; | |
31 | ||
32 | static const uint32_t drvopts[] = { | |
33 | SR_CONF_LOGIC_ANALYZER, | |
34 | }; | |
35 | ||
36 | static const uint32_t devopts[] = { | |
37 | SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
38 | SR_CONF_CAPTURE_RATIO | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
39 | SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
40 | SR_CONF_TRIGGER_MATCH | SR_CONF_LIST, | |
41 | SR_CONF_CONN | SR_CONF_GET, | |
42 | }; | |
43 | ||
44 | static const uint32_t devopts_cg[] = { | |
45 | SR_CONF_VOLTAGE_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
46 | }; | |
47 | ||
48 | static const int32_t trigger_matches[] = { | |
49 | SR_TRIGGER_ZERO, | |
50 | SR_TRIGGER_ONE, | |
51 | SR_TRIGGER_RISING, | |
52 | SR_TRIGGER_FALLING, | |
53 | SR_TRIGGER_EDGE, | |
54 | }; | |
55 | ||
56 | static const uint64_t samplerates[] = { | |
57 | SR_KHZ(1), | |
58 | SR_KHZ(2), | |
59 | SR_KHZ(4), | |
60 | SR_KHZ(8), | |
61 | SR_KHZ(16), | |
62 | SR_HZ(31250), | |
63 | SR_HZ(62500), | |
64 | SR_KHZ(125), | |
65 | SR_KHZ(250), | |
66 | SR_KHZ(500), | |
67 | SR_KHZ(625), | |
68 | SR_HZ(781250), | |
69 | SR_MHZ(1), | |
70 | SR_KHZ(1250), | |
71 | SR_HZ(1562500), | |
72 | SR_MHZ(2), | |
73 | SR_KHZ(2500), | |
74 | SR_KHZ(3125), | |
75 | SR_MHZ(4), | |
76 | SR_MHZ(5), | |
77 | SR_KHZ(6250), | |
78 | SR_MHZ(10), | |
79 | SR_KHZ(12500), | |
80 | SR_MHZ(20), | |
81 | SR_MHZ(25), | |
82 | SR_MHZ(40), | |
83 | SR_MHZ(50), | |
84 | SR_MHZ(80), | |
85 | SR_MHZ(100), | |
86 | SR_MHZ(160), | |
87 | SR_MHZ(200), | |
88 | SR_MHZ(320), | |
89 | SR_MHZ(400), | |
90 | }; | |
91 | ||
92 | static const uint64_t samplerates_hw[] = { | |
93 | SR_MHZ(100), | |
94 | SR_MHZ(50), | |
95 | SR_MHZ(25), | |
96 | SR_KHZ(12500), | |
97 | SR_KHZ(6250), | |
98 | SR_KHZ(3125), | |
99 | SR_HZ(1562500), | |
100 | SR_HZ(781250), | |
101 | SR_MHZ(80), | |
102 | SR_MHZ(40), | |
103 | SR_MHZ(20), | |
104 | SR_MHZ(10), | |
105 | SR_MHZ(5), | |
106 | SR_KHZ(2500), | |
107 | SR_KHZ(1250), | |
108 | SR_KHZ(625), | |
109 | SR_MHZ(4), | |
110 | SR_MHZ(2), | |
111 | SR_MHZ(1), | |
112 | SR_KHZ(500), | |
113 | SR_KHZ(250), | |
114 | SR_KHZ(125), | |
115 | SR_HZ(62500), | |
116 | SR_HZ(31250), | |
117 | SR_KHZ(16), | |
118 | SR_KHZ(8), | |
119 | SR_KHZ(4), | |
120 | SR_KHZ(2), | |
121 | SR_KHZ(1), | |
122 | 0, | |
123 | 0, | |
124 | 0, | |
125 | SR_MHZ(200), | |
126 | SR_MHZ(160), | |
127 | SR_MHZ(400), | |
128 | SR_MHZ(320), | |
129 | }; | |
130 | ||
131 | SR_PRIV struct sr_dev_driver hantek_4032l_driver_info; | |
132 | ||
133 | static GSList *scan(struct sr_dev_driver *di, GSList *options) | |
134 | { | |
135 | struct drv_context *drvc = di->context; | |
136 | GSList *l, *devices, *conn_devices; | |
137 | libusb_device **devlist; | |
138 | struct libusb_device_descriptor des; | |
139 | const char *conn; | |
140 | int i; | |
141 | char connection_id[64]; | |
142 | struct sr_channel_group *cg; | |
143 | struct sr_dev_inst *sdi; | |
144 | struct sr_channel *ch; | |
145 | ||
146 | devices = NULL; | |
147 | conn_devices = NULL; | |
148 | drvc->instances = NULL; | |
149 | conn = NULL; | |
150 | ||
151 | for (l = options; l; l = l->next) { | |
152 | struct sr_config *src = l->data; | |
153 | if (src->key == SR_CONF_CONN) { | |
154 | conn = g_variant_get_string(src->data, NULL); | |
155 | break; | |
156 | } | |
157 | } | |
158 | ||
159 | if (conn) | |
160 | conn_devices = sr_usb_find(drvc->sr_ctx->libusb_ctx, conn); | |
161 | else | |
162 | conn_devices = NULL; | |
163 | ||
164 | libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist); | |
165 | for (i = 0; devlist[i]; i++) { | |
166 | if (conn) { | |
167 | struct sr_usb_dev_inst *usb = NULL; | |
168 | for (l = conn_devices; l; l = l->next) { | |
169 | usb = l->data; | |
170 | if (usb->bus == libusb_get_bus_number(devlist[i]) && | |
171 | usb->address == libusb_get_device_address(devlist[i])) | |
172 | break; | |
173 | } | |
174 | if (!l) | |
175 | /* This device matched none of the ones that | |
176 | * matched the conn specification. */ | |
177 | continue; | |
178 | } | |
179 | ||
180 | libusb_get_device_descriptor(devlist[i], &des); | |
181 | ||
182 | if (des.idVendor != H4032L_USB_VENDOR || | |
183 | des.idProduct != H4032L_USB_PRODUCT) | |
184 | continue; | |
185 | ||
186 | if (usb_get_port_path(devlist[i], connection_id, sizeof(connection_id)) < 0) | |
187 | continue; | |
188 | ||
189 | sdi = g_malloc0(sizeof(struct sr_dev_inst)); | |
190 | sdi->driver = &hantek_4032l_driver_info; | |
191 | sdi->vendor = g_strdup("Hantek"); | |
192 | sdi->model = g_strdup("4032L"); | |
193 | sdi->connection_id = g_strdup(connection_id); | |
194 | ||
195 | struct sr_channel_group *channel_groups[2]; | |
196 | for (int j = 0; j < 2; j++) { | |
197 | cg = g_malloc0(sizeof(struct sr_channel_group)); | |
198 | cg->name = g_strdup_printf("%c", 'A' + j); | |
199 | channel_groups[j] = cg; | |
200 | sdi->channel_groups = g_slist_append(sdi->channel_groups, cg); | |
201 | } | |
202 | ||
203 | /* Assemble channel list and add channel to channel groups. */ | |
204 | for (int j = 0; j < NUM_CHANNELS; j++) { | |
205 | char channel_name[4]; | |
206 | sprintf(channel_name, "%c%d", 'A' + (j & 1), j / 2); | |
207 | ch = sr_channel_new(sdi, j, SR_CHANNEL_LOGIC, TRUE, channel_name); | |
208 | cg = channel_groups[j & 1]; | |
209 | cg->channels = g_slist_append(cg->channels, ch); | |
210 | } | |
211 | ||
212 | struct dev_context *devc = g_malloc0(sizeof(struct dev_context)); | |
213 | ||
214 | /* Initialize command packet. */ | |
215 | devc->cmd_pkt.magic = H4032L_CMD_PKT_MAGIC; | |
216 | devc->cmd_pkt.sample_size = 16384; | |
217 | ||
218 | devc->status = H4032L_STATUS_IDLE; | |
219 | ||
220 | devc->capture_ratio = 5; | |
221 | devc->cur_threshold[0] = 2.5; | |
222 | devc->cur_threshold[1] = 2.5; | |
223 | ||
224 | sdi->priv = devc; | |
225 | devices = g_slist_append(devices, sdi); | |
226 | ||
227 | sdi->status = SR_ST_INACTIVE; | |
228 | sdi->inst_type = SR_INST_USB; | |
229 | sdi->conn = sr_usb_dev_inst_new( | |
230 | libusb_get_bus_number(devlist[i]), | |
231 | libusb_get_device_address(devlist[i]), NULL); | |
232 | } | |
233 | ||
234 | g_slist_free_full(conn_devices, (GDestroyNotify)sr_usb_dev_inst_free); | |
235 | libusb_free_device_list(devlist, 1); | |
236 | ||
237 | return std_scan_complete(di, devices); | |
238 | } | |
239 | ||
240 | static int dev_open(struct sr_dev_inst *sdi) | |
241 | { | |
242 | struct sr_usb_dev_inst *usb = sdi->conn; | |
243 | int ret; | |
244 | ||
245 | ret = h4032l_dev_open(sdi); | |
246 | if (ret != SR_OK) { | |
247 | sr_err("Unable to open device."); | |
248 | return SR_ERR; | |
249 | } | |
250 | ||
251 | ret = libusb_claim_interface(usb->devhdl, USB_INTERFACE); | |
252 | if (ret != 0) { | |
253 | switch (ret) { | |
254 | case LIBUSB_ERROR_BUSY: | |
255 | sr_err("Unable to claim USB interface. Another " | |
256 | "program or driver has already claimed it."); | |
257 | break; | |
258 | case LIBUSB_ERROR_NO_DEVICE: | |
259 | sr_err("Device has been disconnected."); | |
260 | break; | |
261 | default: | |
262 | sr_err("Unable to claim interface: %s.", | |
263 | libusb_error_name(ret)); | |
264 | break; | |
265 | } | |
266 | ||
267 | return SR_ERR; | |
268 | } | |
269 | ||
270 | /* Get FPGA version. */ | |
271 | if ((ret = h4032l_get_fpga_version(sdi)) != SR_OK) | |
272 | return ret; | |
273 | ||
274 | return SR_OK; | |
275 | } | |
276 | ||
277 | static int dev_close(struct sr_dev_inst *sdi) | |
278 | { | |
279 | struct sr_usb_dev_inst *usb; | |
280 | ||
281 | usb = sdi->conn; | |
282 | ||
283 | if (!usb->devhdl) | |
284 | return SR_ERR_BUG; | |
285 | ||
286 | sr_info("Closing device on %d.%d (logical) / %s (physical) interface %d.", | |
287 | usb->bus, usb->address, sdi->connection_id, USB_INTERFACE); | |
288 | libusb_release_interface(usb->devhdl, USB_INTERFACE); | |
289 | libusb_close(usb->devhdl); | |
290 | usb->devhdl = NULL; | |
291 | ||
292 | return SR_OK; | |
293 | } | |
294 | ||
295 | static int config_get(uint32_t key, GVariant **data, | |
296 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) | |
297 | { | |
298 | struct dev_context *devc = sdi->priv; | |
299 | struct sr_usb_dev_inst *usb; | |
300 | ||
301 | switch (key) { | |
302 | case SR_CONF_VOLTAGE_THRESHOLD: | |
303 | if (cg) { | |
304 | if (!strcmp(cg->name, "A")) | |
305 | *data = std_gvar_tuple_double( | |
306 | devc->cur_threshold[0], devc->cur_threshold[0]); | |
307 | else if (!strcmp(cg->name, "B")) | |
308 | *data = std_gvar_tuple_double( | |
309 | devc->cur_threshold[1], devc->cur_threshold[1]); | |
310 | else | |
311 | return SR_ERR_CHANNEL_GROUP; | |
312 | } | |
313 | break; | |
314 | case SR_CONF_SAMPLERATE: | |
315 | *data = g_variant_new_uint64(samplerates_hw[devc->cmd_pkt.sample_rate]); | |
316 | break; | |
317 | case SR_CONF_CAPTURE_RATIO: | |
318 | *data = g_variant_new_uint64(devc->capture_ratio); | |
319 | break; | |
320 | case SR_CONF_LIMIT_SAMPLES: | |
321 | *data = g_variant_new_uint64(devc->cmd_pkt.sample_size); | |
322 | break; | |
323 | case SR_CONF_CONN: | |
324 | if (!sdi || !(usb = sdi->conn)) | |
325 | return SR_ERR_ARG; | |
326 | *data = g_variant_new_printf("%d.%d", usb->bus, usb->address); | |
327 | break; | |
328 | default: | |
329 | return SR_ERR_NA; | |
330 | } | |
331 | ||
332 | return SR_OK; | |
333 | } | |
334 | ||
335 | static int config_set(uint32_t key, GVariant *data, | |
336 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) | |
337 | { | |
338 | struct dev_context *devc = sdi->priv; | |
339 | struct h4032l_cmd_pkt *cmd_pkt = &devc->cmd_pkt; | |
340 | ||
341 | switch (key) { | |
342 | case SR_CONF_SAMPLERATE: { | |
343 | uint64_t sample_rate = g_variant_get_uint64(data); | |
344 | uint8_t i = 0; | |
345 | while (i < ARRAY_SIZE(samplerates_hw) && samplerates_hw[i] != sample_rate) | |
346 | i++; | |
347 | ||
348 | if (i == ARRAY_SIZE(samplerates_hw) || sample_rate == 0) { | |
349 | sr_err("Invalid sample rate."); | |
350 | return SR_ERR_SAMPLERATE; | |
351 | } | |
352 | cmd_pkt->sample_rate = i; | |
353 | break; | |
354 | } | |
355 | case SR_CONF_CAPTURE_RATIO: { | |
356 | uint64_t capture_ratio = g_variant_get_uint64(data); | |
357 | if (capture_ratio > 99) { | |
358 | sr_err("Invalid capture ratio."); | |
359 | return SR_ERR; | |
360 | } | |
361 | devc->capture_ratio = capture_ratio; | |
362 | break; | |
363 | } | |
364 | case SR_CONF_LIMIT_SAMPLES: { | |
365 | uint64_t number_samples = g_variant_get_uint64(data); | |
366 | number_samples += 511; | |
367 | number_samples &= 0xfffffe00; | |
368 | if (number_samples < H4043L_NUM_SAMPLES_MIN || | |
369 | number_samples > H4032L_NUM_SAMPLES_MAX) { | |
370 | sr_err("Invalid sample range 2k...64M: %" | |
371 | PRIu64 ".", number_samples); | |
372 | return SR_ERR; | |
373 | } | |
374 | cmd_pkt->sample_size = number_samples; | |
375 | break; | |
376 | } | |
377 | case SR_CONF_VOLTAGE_THRESHOLD: { | |
378 | double low, high; | |
379 | g_variant_get(data, "(dd)", &low, &high); | |
380 | double threshold = (low + high) / 2.0; | |
381 | if (cg) { | |
382 | if (!strcmp(cg->name, "A")) | |
383 | devc->cur_threshold[0] = threshold; | |
384 | else if (!strcmp(cg->name, "B")) | |
385 | devc->cur_threshold[1] = threshold; | |
386 | else | |
387 | return SR_ERR_CHANNEL_GROUP; | |
388 | } | |
389 | break; | |
390 | } | |
391 | default: | |
392 | return SR_ERR_NA; | |
393 | } | |
394 | ||
395 | return SR_OK; | |
396 | } | |
397 | ||
398 | static int config_list(uint32_t key, GVariant **data, | |
399 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) | |
400 | { | |
401 | switch (key) { | |
402 | case SR_CONF_SCAN_OPTIONS: | |
403 | case SR_CONF_DEVICE_OPTIONS: | |
404 | if (cg) { | |
405 | *data = std_gvar_array_u32(ARRAY_AND_SIZE(devopts_cg)); | |
406 | break; | |
407 | } | |
408 | return STD_CONFIG_LIST(key, data, sdi, cg, scanopts, drvopts, devopts); | |
409 | case SR_CONF_SAMPLERATE: | |
410 | *data = std_gvar_samplerates(ARRAY_AND_SIZE(samplerates)); | |
411 | break; | |
412 | case SR_CONF_TRIGGER_MATCH: | |
413 | *data = std_gvar_array_i32(ARRAY_AND_SIZE(trigger_matches)); | |
414 | break; | |
415 | case SR_CONF_VOLTAGE_THRESHOLD: | |
416 | *data = std_gvar_min_max_step_thresholds(-6.0, 6.0, 0.1); | |
417 | break; | |
418 | case SR_CONF_LIMIT_SAMPLES: | |
419 | *data = std_gvar_tuple_u64(H4043L_NUM_SAMPLES_MIN, H4032L_NUM_SAMPLES_MAX); | |
420 | break; | |
421 | default: | |
422 | return SR_ERR_NA; | |
423 | } | |
424 | ||
425 | return SR_OK; | |
426 | } | |
427 | ||
428 | static int dev_acquisition_start(const struct sr_dev_inst *sdi) | |
429 | { | |
430 | struct sr_dev_driver *di = sdi->driver; | |
431 | struct drv_context *drvc = di->context; | |
432 | struct dev_context *devc = sdi->priv; | |
433 | struct sr_trigger *trigger = sr_session_trigger_get(sdi->session); | |
434 | struct h4032l_cmd_pkt *cmd_pkt = &devc->cmd_pkt; | |
435 | ||
436 | /* Initialize variables. */ | |
437 | devc->acq_aborted = FALSE; | |
438 | devc->submitted_transfers = 0; | |
439 | devc->sent_samples = 0; | |
440 | ||
441 | /* Calculate packet ratio. */ | |
442 | cmd_pkt->pre_trigger_size = (cmd_pkt->sample_size * devc->capture_ratio) / 100; | |
443 | devc->trigger_pos = cmd_pkt->pre_trigger_size; | |
444 | ||
445 | /* Set pwm channel values. */ | |
446 | devc->cmd_pkt.pwm_a = h4032l_voltage2pwm(devc->cur_threshold[0]); | |
447 | devc->cmd_pkt.pwm_b = h4032l_voltage2pwm(devc->cur_threshold[1]); | |
448 | ||
449 | cmd_pkt->trig_flags.enable_trigger1 = 0; | |
450 | cmd_pkt->trig_flags.enable_trigger2 = 0; | |
451 | cmd_pkt->trig_flags.trigger_and_logic = 0; | |
452 | ||
453 | if (trigger && trigger->stages) { | |
454 | GSList *stages = trigger->stages; | |
455 | struct sr_trigger_stage *stage1 = stages->data; | |
456 | if (stages->next) { | |
457 | sr_err("Only one trigger stage supported for now."); | |
458 | return SR_ERR; | |
459 | } | |
460 | cmd_pkt->trig_flags.enable_trigger1 = 1; | |
461 | cmd_pkt->trigger[0].flags.edge_type = H4032L_TRIGGER_EDGE_TYPE_DISABLED; | |
462 | cmd_pkt->trigger[0].flags.data_range_enabled = 0; | |
463 | cmd_pkt->trigger[0].flags.time_range_enabled = 0; | |
464 | cmd_pkt->trigger[0].flags.combined_enabled = 0; | |
465 | cmd_pkt->trigger[0].flags.data_range_type = H4032L_TRIGGER_DATA_RANGE_TYPE_MAX; | |
466 | cmd_pkt->trigger[0].data_range_mask = 0; | |
467 | cmd_pkt->trigger[0].data_range_max = 0; | |
468 | ||
469 | /* Initialize range mask values. */ | |
470 | uint32_t range_mask = 0; | |
471 | uint32_t range_value = 0; | |
472 | ||
473 | GSList *channel = stage1->matches; | |
474 | while (channel) { | |
475 | struct sr_trigger_match *match = channel->data; | |
476 | ||
477 | switch (match->match) { | |
478 | case SR_TRIGGER_ZERO: | |
479 | range_mask |= (1 << match->channel->index); | |
480 | break; | |
481 | case SR_TRIGGER_ONE: | |
482 | range_mask |= (1 << match->channel->index); | |
483 | range_value |= (1 << match->channel->index); | |
484 | break; | |
485 | case SR_TRIGGER_RISING: | |
486 | if (cmd_pkt->trigger[0].flags.edge_type != H4032L_TRIGGER_EDGE_TYPE_DISABLED) { | |
487 | sr_err("Only one trigger signal with fall/rising/edge allowed."); | |
488 | return SR_ERR; | |
489 | } | |
490 | cmd_pkt->trigger[0].flags.edge_type = H4032L_TRIGGER_EDGE_TYPE_RISE; | |
491 | cmd_pkt->trigger[0].flags.edge_signal = match->channel->index; | |
492 | break; | |
493 | case SR_TRIGGER_FALLING: | |
494 | if (cmd_pkt->trigger[0].flags.edge_type != H4032L_TRIGGER_EDGE_TYPE_DISABLED) { | |
495 | sr_err("Only one trigger signal with fall/rising/edge allowed."); | |
496 | return SR_ERR; | |
497 | } | |
498 | cmd_pkt->trigger[0].flags.edge_type = H4032L_TRIGGER_EDGE_TYPE_FALL; | |
499 | cmd_pkt->trigger[0].flags.edge_signal = match->channel->index; | |
500 | break; | |
501 | case SR_TRIGGER_EDGE: | |
502 | if (cmd_pkt->trigger[0].flags.edge_type != H4032L_TRIGGER_EDGE_TYPE_DISABLED) { | |
503 | sr_err("Only one trigger signal with fall/rising/edge allowed."); | |
504 | return SR_ERR; | |
505 | } | |
506 | cmd_pkt->trigger[0].flags.edge_type = H4032L_TRIGGER_EDGE_TYPE_TOGGLE; | |
507 | cmd_pkt->trigger[0].flags.edge_signal = match->channel->index; | |
508 | break; | |
509 | default: | |
510 | sr_err("Unknown trigger value."); | |
511 | return SR_ERR; | |
512 | } | |
513 | ||
514 | channel = channel->next; | |
515 | } | |
516 | ||
517 | /* Compress range mask value and apply range settings. */ | |
518 | if (range_mask) { | |
519 | cmd_pkt->trigger[0].flags.data_range_enabled = 1; | |
520 | cmd_pkt->trigger[0].data_range_mask |= (range_mask); | |
521 | ||
522 | uint32_t new_range_value = 0; | |
523 | uint32_t bit_mask = 1; | |
524 | while (range_mask) { | |
525 | if ((range_mask & 1) != 0) { | |
526 | new_range_value <<= 1; | |
527 | if ((range_value & 1) != 0) | |
528 | new_range_value |= bit_mask; | |
529 | bit_mask <<= 1; | |
530 | } | |
531 | range_mask >>= 1; | |
532 | range_value >>= 1; | |
533 | } | |
534 | cmd_pkt->trigger[0].data_range_max |= range_value; | |
535 | } | |
536 | } | |
537 | ||
538 | usb_source_add(sdi->session, drvc->sr_ctx, 1000, | |
539 | h4032l_receive_data, sdi->driver->context); | |
540 | ||
541 | /* Start capturing. */ | |
542 | return h4032l_start(sdi); | |
543 | } | |
544 | ||
545 | static int dev_acquisition_stop(struct sr_dev_inst *sdi) | |
546 | { | |
547 | /* Stop capturing. */ | |
548 | return h4032l_stop(sdi); | |
549 | } | |
550 | ||
551 | SR_PRIV struct sr_dev_driver hantek_4032l_driver_info = { | |
552 | .name = "hantek-4032l", | |
553 | .longname = "Hantek 4032L", | |
554 | .api_version = 1, | |
555 | .init = std_init, | |
556 | .cleanup = std_cleanup, | |
557 | .scan = scan, | |
558 | .dev_list = std_dev_list, | |
559 | .dev_clear = std_dev_clear, | |
560 | .config_get = config_get, | |
561 | .config_set = config_set, | |
562 | .config_list = config_list, | |
563 | .dev_open = dev_open, | |
564 | .dev_close = dev_close, | |
565 | .dev_acquisition_start = dev_acquisition_start, | |
566 | .dev_acquisition_stop = dev_acquisition_stop, | |
567 | .context = NULL, | |
568 | }; | |
569 | SR_REGISTER_DEV_DRIVER(hantek_4032l_driver_info); |