]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2010-2012 Håvard Espeland <gus@ping.uio.no>, | |
5 | * Copyright (C) 2010 Martin Stensgård <mastensg@ping.uio.no> | |
6 | * Copyright (C) 2010 Carl Henrik Lunde <chlunde@ping.uio.no> | |
7 | * | |
8 | * This program is free software: you can redistribute it and/or modify | |
9 | * it under the terms of the GNU General Public License as published by | |
10 | * the Free Software Foundation, either version 3 of the License, or | |
11 | * (at your option) any later version. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, | |
14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | * GNU General Public License for more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License | |
19 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
20 | */ | |
21 | ||
22 | /* | |
23 | * ASIX SIGMA/SIGMA2 logic analyzer driver | |
24 | */ | |
25 | ||
26 | #include <config.h> | |
27 | #include "protocol.h" | |
28 | ||
29 | /* | |
30 | * The ASIX Sigma supports arbitrary integer frequency divider in | |
31 | * the 50MHz mode. The divider is in range 1...256 , allowing for | |
32 | * very precise sampling rate selection. This driver supports only | |
33 | * a subset of the sampling rates. | |
34 | */ | |
35 | SR_PRIV const uint64_t samplerates[] = { | |
36 | SR_KHZ(200), /* div=250 */ | |
37 | SR_KHZ(250), /* div=200 */ | |
38 | SR_KHZ(500), /* div=100 */ | |
39 | SR_MHZ(1), /* div=50 */ | |
40 | SR_MHZ(5), /* div=10 */ | |
41 | SR_MHZ(10), /* div=5 */ | |
42 | SR_MHZ(25), /* div=2 */ | |
43 | SR_MHZ(50), /* div=1 */ | |
44 | SR_MHZ(100), /* Special FW needed */ | |
45 | SR_MHZ(200), /* Special FW needed */ | |
46 | }; | |
47 | ||
48 | SR_PRIV const size_t samplerates_count = ARRAY_SIZE(samplerates); | |
49 | ||
50 | static const char *firmware_files[] = { | |
51 | "asix-sigma-50.fw", /* Up to 50MHz sample rate, 8bit divider. */ | |
52 | "asix-sigma-100.fw", /* 100MHz sample rate, fixed. */ | |
53 | "asix-sigma-200.fw", /* 200MHz sample rate, fixed. */ | |
54 | "asix-sigma-50sync.fw", /* Synchronous clock from external pin. */ | |
55 | "asix-sigma-phasor.fw", /* Frequency counter. */ | |
56 | }; | |
57 | ||
58 | #define SIGMA_FIRMWARE_SIZE_LIMIT (256 * 1024) | |
59 | ||
60 | static int sigma_read(void *buf, size_t size, struct dev_context *devc) | |
61 | { | |
62 | int ret; | |
63 | ||
64 | ret = ftdi_read_data(&devc->ftdic, (unsigned char *)buf, size); | |
65 | if (ret < 0) { | |
66 | sr_err("ftdi_read_data failed: %s", | |
67 | ftdi_get_error_string(&devc->ftdic)); | |
68 | } | |
69 | ||
70 | return ret; | |
71 | } | |
72 | ||
73 | static int sigma_write(void *buf, size_t size, struct dev_context *devc) | |
74 | { | |
75 | int ret; | |
76 | ||
77 | ret = ftdi_write_data(&devc->ftdic, (unsigned char *)buf, size); | |
78 | if (ret < 0) | |
79 | sr_err("ftdi_write_data failed: %s", | |
80 | ftdi_get_error_string(&devc->ftdic)); | |
81 | else if ((size_t) ret != size) | |
82 | sr_err("ftdi_write_data did not complete write."); | |
83 | ||
84 | return ret; | |
85 | } | |
86 | ||
87 | /* | |
88 | * NOTE: We chose the buffer size to be large enough to hold any write to the | |
89 | * device. We still print a message just in case. | |
90 | */ | |
91 | SR_PRIV int sigma_write_register(uint8_t reg, uint8_t *data, size_t len, | |
92 | struct dev_context *devc) | |
93 | { | |
94 | size_t i; | |
95 | uint8_t buf[80]; | |
96 | int idx = 0; | |
97 | ||
98 | if ((2 * len + 2) > sizeof(buf)) { | |
99 | sr_err("Attempted to write %zu bytes, but buffer is too small.", | |
100 | len); | |
101 | return SR_ERR_BUG; | |
102 | } | |
103 | ||
104 | buf[idx++] = REG_ADDR_LOW | (reg & 0xf); | |
105 | buf[idx++] = REG_ADDR_HIGH | (reg >> 4); | |
106 | ||
107 | for (i = 0; i < len; i++) { | |
108 | buf[idx++] = REG_DATA_LOW | (data[i] & 0xf); | |
109 | buf[idx++] = REG_DATA_HIGH_WRITE | (data[i] >> 4); | |
110 | } | |
111 | ||
112 | return sigma_write(buf, idx, devc); | |
113 | } | |
114 | ||
115 | SR_PRIV int sigma_set_register(uint8_t reg, uint8_t value, struct dev_context *devc) | |
116 | { | |
117 | return sigma_write_register(reg, &value, 1, devc); | |
118 | } | |
119 | ||
120 | static int sigma_read_register(uint8_t reg, uint8_t *data, size_t len, | |
121 | struct dev_context *devc) | |
122 | { | |
123 | uint8_t buf[3]; | |
124 | ||
125 | buf[0] = REG_ADDR_LOW | (reg & 0xf); | |
126 | buf[1] = REG_ADDR_HIGH | (reg >> 4); | |
127 | buf[2] = REG_READ_ADDR; | |
128 | ||
129 | sigma_write(buf, sizeof(buf), devc); | |
130 | ||
131 | return sigma_read(data, len, devc); | |
132 | } | |
133 | ||
134 | static int sigma_read_pos(uint32_t *stoppos, uint32_t *triggerpos, | |
135 | struct dev_context *devc) | |
136 | { | |
137 | uint8_t buf[] = { | |
138 | REG_ADDR_LOW | READ_TRIGGER_POS_LOW, | |
139 | ||
140 | REG_READ_ADDR | NEXT_REG, | |
141 | REG_READ_ADDR | NEXT_REG, | |
142 | REG_READ_ADDR | NEXT_REG, | |
143 | REG_READ_ADDR | NEXT_REG, | |
144 | REG_READ_ADDR | NEXT_REG, | |
145 | REG_READ_ADDR | NEXT_REG, | |
146 | }; | |
147 | uint8_t result[6]; | |
148 | ||
149 | sigma_write(buf, sizeof(buf), devc); | |
150 | ||
151 | sigma_read(result, sizeof(result), devc); | |
152 | ||
153 | *triggerpos = result[0] | (result[1] << 8) | (result[2] << 16); | |
154 | *stoppos = result[3] | (result[4] << 8) | (result[5] << 16); | |
155 | ||
156 | /* | |
157 | * These "position" values point to after the event (end of | |
158 | * capture data, trigger condition matched). This is why they | |
159 | * get decremented here. Sample memory consists of 512-byte | |
160 | * chunks with meta data in the upper 64 bytes. Thus when the | |
161 | * decrements takes us into this upper part of the chunk, then | |
162 | * further move backwards to the end of the chunk's data part. | |
163 | */ | |
164 | if ((--*stoppos & 0x1ff) == 0x1ff) | |
165 | *stoppos -= 64; | |
166 | if ((--*triggerpos & 0x1ff) == 0x1ff) | |
167 | *triggerpos -= 64; | |
168 | ||
169 | return 1; | |
170 | } | |
171 | ||
172 | static int sigma_read_dram(uint16_t startchunk, size_t numchunks, | |
173 | uint8_t *data, struct dev_context *devc) | |
174 | { | |
175 | size_t i; | |
176 | uint8_t buf[4096]; | |
177 | int idx; | |
178 | ||
179 | /* Send the startchunk. Index start with 1. */ | |
180 | idx = 0; | |
181 | buf[idx++] = startchunk >> 8; | |
182 | buf[idx++] = startchunk & 0xff; | |
183 | sigma_write_register(WRITE_MEMROW, buf, idx, devc); | |
184 | ||
185 | /* Read the DRAM. */ | |
186 | idx = 0; | |
187 | buf[idx++] = REG_DRAM_BLOCK; | |
188 | buf[idx++] = REG_DRAM_WAIT_ACK; | |
189 | ||
190 | for (i = 0; i < numchunks; i++) { | |
191 | /* Alternate bit to copy from DRAM to cache. */ | |
192 | if (i != (numchunks - 1)) | |
193 | buf[idx++] = REG_DRAM_BLOCK | (((i + 1) % 2) << 4); | |
194 | ||
195 | buf[idx++] = REG_DRAM_BLOCK_DATA | ((i % 2) << 4); | |
196 | ||
197 | if (i != (numchunks - 1)) | |
198 | buf[idx++] = REG_DRAM_WAIT_ACK; | |
199 | } | |
200 | ||
201 | sigma_write(buf, idx, devc); | |
202 | ||
203 | return sigma_read(data, numchunks * CHUNK_SIZE, devc); | |
204 | } | |
205 | ||
206 | /* Upload trigger look-up tables to Sigma. */ | |
207 | SR_PRIV int sigma_write_trigger_lut(struct triggerlut *lut, struct dev_context *devc) | |
208 | { | |
209 | int i; | |
210 | uint8_t tmp[2]; | |
211 | uint16_t bit; | |
212 | ||
213 | /* Transpose the table and send to Sigma. */ | |
214 | for (i = 0; i < 16; i++) { | |
215 | bit = 1 << i; | |
216 | ||
217 | tmp[0] = tmp[1] = 0; | |
218 | ||
219 | if (lut->m2d[0] & bit) | |
220 | tmp[0] |= 0x01; | |
221 | if (lut->m2d[1] & bit) | |
222 | tmp[0] |= 0x02; | |
223 | if (lut->m2d[2] & bit) | |
224 | tmp[0] |= 0x04; | |
225 | if (lut->m2d[3] & bit) | |
226 | tmp[0] |= 0x08; | |
227 | ||
228 | if (lut->m3 & bit) | |
229 | tmp[0] |= 0x10; | |
230 | if (lut->m3s & bit) | |
231 | tmp[0] |= 0x20; | |
232 | if (lut->m4 & bit) | |
233 | tmp[0] |= 0x40; | |
234 | ||
235 | if (lut->m0d[0] & bit) | |
236 | tmp[1] |= 0x01; | |
237 | if (lut->m0d[1] & bit) | |
238 | tmp[1] |= 0x02; | |
239 | if (lut->m0d[2] & bit) | |
240 | tmp[1] |= 0x04; | |
241 | if (lut->m0d[3] & bit) | |
242 | tmp[1] |= 0x08; | |
243 | ||
244 | if (lut->m1d[0] & bit) | |
245 | tmp[1] |= 0x10; | |
246 | if (lut->m1d[1] & bit) | |
247 | tmp[1] |= 0x20; | |
248 | if (lut->m1d[2] & bit) | |
249 | tmp[1] |= 0x40; | |
250 | if (lut->m1d[3] & bit) | |
251 | tmp[1] |= 0x80; | |
252 | ||
253 | sigma_write_register(WRITE_TRIGGER_SELECT0, tmp, sizeof(tmp), | |
254 | devc); | |
255 | sigma_set_register(WRITE_TRIGGER_SELECT1, 0x30 | i, devc); | |
256 | } | |
257 | ||
258 | /* Send the parameters */ | |
259 | sigma_write_register(WRITE_TRIGGER_SELECT0, (uint8_t *) &lut->params, | |
260 | sizeof(lut->params), devc); | |
261 | ||
262 | return SR_OK; | |
263 | } | |
264 | ||
265 | /* | |
266 | * See Xilinx UG332 for Spartan-3 FPGA configuration. The SIGMA device | |
267 | * uses FTDI bitbang mode for netlist download in slave serial mode. | |
268 | * (LATER: The OMEGA device's cable contains a more capable FTDI chip | |
269 | * and uses MPSSE mode for bitbang. -- Can we also use FT232H in FT245 | |
270 | * compatible bitbang mode? For maximum code re-use and reduced libftdi | |
271 | * dependency? See section 3.5.5 of FT232H: D0 clk, D1 data (out), D2 | |
272 | * data (in), D3 select, D4-7 GPIOL. See section 3.5.7 for MCU FIFO.) | |
273 | * | |
274 | * 750kbps rate (four times the speed of sigmalogan) works well for | |
275 | * netlist download. All pins except INIT_B are output pins during | |
276 | * configuration download. | |
277 | * | |
278 | * Some pins are inverted as a byproduct of level shifting circuitry. | |
279 | * That's why high CCLK level (from the cable's point of view) is idle | |
280 | * from the FPGA's perspective. | |
281 | * | |
282 | * The vendor's literature discusses a "suicide sequence" which ends | |
283 | * regular FPGA execution and should be sent before entering bitbang | |
284 | * mode and sending configuration data. Set D7 and toggle D2, D3, D4 | |
285 | * a few times. | |
286 | */ | |
287 | #define BB_PIN_CCLK (1 << 0) /* D0, CCLK */ | |
288 | #define BB_PIN_PROG (1 << 1) /* D1, PROG */ | |
289 | #define BB_PIN_D2 (1 << 2) /* D2, (part of) SUICIDE */ | |
290 | #define BB_PIN_D3 (1 << 3) /* D3, (part of) SUICIDE */ | |
291 | #define BB_PIN_D4 (1 << 4) /* D4, (part of) SUICIDE (unused?) */ | |
292 | #define BB_PIN_INIT (1 << 5) /* D5, INIT, input pin */ | |
293 | #define BB_PIN_DIN (1 << 6) /* D6, DIN */ | |
294 | #define BB_PIN_D7 (1 << 7) /* D7, (part of) SUICIDE */ | |
295 | ||
296 | #define BB_BITRATE (750 * 1000) | |
297 | #define BB_PINMASK (0xff & ~BB_PIN_INIT) | |
298 | ||
299 | /* | |
300 | * Initiate slave serial mode for configuration download. Which is done | |
301 | * by pulsing PROG_B and sensing INIT_B. Make sure CCLK is idle before | |
302 | * initiating the configuration download. Run a "suicide sequence" first | |
303 | * to terminate the regular FPGA operation before reconfiguration. | |
304 | */ | |
305 | static int sigma_fpga_init_bitbang(struct dev_context *devc) | |
306 | { | |
307 | uint8_t suicide[] = { | |
308 | BB_PIN_D7 | BB_PIN_D2, | |
309 | BB_PIN_D7 | BB_PIN_D2, | |
310 | BB_PIN_D7 | BB_PIN_D3, | |
311 | BB_PIN_D7 | BB_PIN_D2, | |
312 | BB_PIN_D7 | BB_PIN_D3, | |
313 | BB_PIN_D7 | BB_PIN_D2, | |
314 | BB_PIN_D7 | BB_PIN_D3, | |
315 | BB_PIN_D7 | BB_PIN_D2, | |
316 | }; | |
317 | uint8_t init_array[] = { | |
318 | BB_PIN_CCLK, | |
319 | BB_PIN_CCLK | BB_PIN_PROG, | |
320 | BB_PIN_CCLK | BB_PIN_PROG, | |
321 | BB_PIN_CCLK, | |
322 | BB_PIN_CCLK, | |
323 | BB_PIN_CCLK, | |
324 | BB_PIN_CCLK, | |
325 | BB_PIN_CCLK, | |
326 | BB_PIN_CCLK, | |
327 | BB_PIN_CCLK, | |
328 | }; | |
329 | int retries, ret; | |
330 | uint8_t data; | |
331 | ||
332 | /* Section 2. part 1), do the FPGA suicide. */ | |
333 | sigma_write(suicide, sizeof(suicide), devc); | |
334 | sigma_write(suicide, sizeof(suicide), devc); | |
335 | sigma_write(suicide, sizeof(suicide), devc); | |
336 | sigma_write(suicide, sizeof(suicide), devc); | |
337 | ||
338 | /* Section 2. part 2), pulse PROG. */ | |
339 | sigma_write(init_array, sizeof(init_array), devc); | |
340 | ftdi_usb_purge_buffers(&devc->ftdic); | |
341 | ||
342 | /* Wait until the FPGA asserts INIT_B. */ | |
343 | retries = 10; | |
344 | while (retries--) { | |
345 | ret = sigma_read(&data, 1, devc); | |
346 | if (ret < 0) | |
347 | return ret; | |
348 | if (data & BB_PIN_INIT) | |
349 | return SR_OK; | |
350 | g_usleep(10 * 1000); | |
351 | } | |
352 | ||
353 | return SR_ERR_TIMEOUT; | |
354 | } | |
355 | ||
356 | /* | |
357 | * Configure the FPGA for logic-analyzer mode. | |
358 | */ | |
359 | static int sigma_fpga_init_la(struct dev_context *devc) | |
360 | { | |
361 | /* | |
362 | * TODO Construct the sequence at runtime? Such that request data | |
363 | * and response check values will match more apparently? | |
364 | */ | |
365 | uint8_t mode_regval = WMR_SDRAMINIT; | |
366 | uint8_t logic_mode_start[] = { | |
367 | /* Read ID register. */ | |
368 | REG_ADDR_LOW | (READ_ID & 0xf), | |
369 | REG_ADDR_HIGH | (READ_ID >> 4), | |
370 | REG_READ_ADDR, | |
371 | ||
372 | /* Write 0x55 to scratch register, read back. */ | |
373 | REG_ADDR_LOW | (WRITE_TEST & 0xf), | |
374 | REG_DATA_LOW | 0x5, | |
375 | REG_DATA_HIGH_WRITE | 0x5, | |
376 | REG_READ_ADDR, | |
377 | ||
378 | /* Write 0xaa to scratch register, read back. */ | |
379 | REG_DATA_LOW | 0xa, | |
380 | REG_DATA_HIGH_WRITE | 0xa, | |
381 | REG_READ_ADDR, | |
382 | ||
383 | /* Initiate SDRAM initialization in mode register. */ | |
384 | REG_ADDR_LOW | (WRITE_MODE & 0xf), | |
385 | REG_DATA_LOW | (mode_regval & 0xf), | |
386 | REG_DATA_HIGH_WRITE | (mode_regval >> 4), | |
387 | }; | |
388 | uint8_t result[3]; | |
389 | int ret; | |
390 | ||
391 | /* | |
392 | * Send the command sequence which contains 3 READ requests. | |
393 | * Expect to see the corresponding 3 response bytes. | |
394 | */ | |
395 | sigma_write(logic_mode_start, sizeof(logic_mode_start), devc); | |
396 | ret = sigma_read(result, ARRAY_SIZE(result), devc); | |
397 | if (ret != ARRAY_SIZE(result)) | |
398 | goto err; | |
399 | if (result[0] != 0xa6 || result[1] != 0x55 || result[2] != 0xaa) | |
400 | goto err; | |
401 | ||
402 | return SR_OK; | |
403 | ||
404 | err: | |
405 | sr_err("Configuration failed. Invalid reply received."); | |
406 | return SR_ERR; | |
407 | } | |
408 | ||
409 | /* | |
410 | * Read the firmware from a file and transform it into a series of bitbang | |
411 | * pulses used to program the FPGA. Note that the *bb_cmd must be free()'d | |
412 | * by the caller of this function. | |
413 | */ | |
414 | static int sigma_fw_2_bitbang(struct sr_context *ctx, const char *name, | |
415 | uint8_t **bb_cmd, gsize *bb_cmd_size) | |
416 | { | |
417 | uint8_t *firmware; | |
418 | size_t file_size; | |
419 | uint8_t *p; | |
420 | size_t l; | |
421 | uint32_t imm; | |
422 | size_t bb_size; | |
423 | uint8_t *bb_stream, *bbs, byte, mask, v; | |
424 | ||
425 | /* Retrieve the on-disk firmware file content. */ | |
426 | firmware = sr_resource_load(ctx, SR_RESOURCE_FIRMWARE, name, | |
427 | &file_size, SIGMA_FIRMWARE_SIZE_LIMIT); | |
428 | if (!firmware) | |
429 | return SR_ERR_IO; | |
430 | ||
431 | /* Unscramble the file content (XOR with "random" sequence). */ | |
432 | p = firmware; | |
433 | l = file_size; | |
434 | imm = 0x3f6df2ab; | |
435 | while (l--) { | |
436 | imm = (imm + 0xa853753) % 177 + (imm * 0x8034052); | |
437 | *p++ ^= imm & 0xff; | |
438 | } | |
439 | ||
440 | /* | |
441 | * Generate a sequence of bitbang samples. With two samples per | |
442 | * FPGA configuration bit, providing the level for the DIN signal | |
443 | * as well as two edges for CCLK. See Xilinx UG332 for details | |
444 | * ("slave serial" mode). | |
445 | * | |
446 | * Note that CCLK is inverted in hardware. That's why the | |
447 | * respective bit is first set and then cleared in the bitbang | |
448 | * sample sets. So that the DIN level will be stable when the | |
449 | * data gets sampled at the rising CCLK edge, and the signals' | |
450 | * setup time constraint will be met. | |
451 | * | |
452 | * The caller will put the FPGA into download mode, will send | |
453 | * the bitbang samples, and release the allocated memory. | |
454 | */ | |
455 | bb_size = file_size * 8 * 2; | |
456 | bb_stream = g_try_malloc(bb_size); | |
457 | if (!bb_stream) { | |
458 | sr_err("%s: Failed to allocate bitbang stream", __func__); | |
459 | g_free(firmware); | |
460 | return SR_ERR_MALLOC; | |
461 | } | |
462 | bbs = bb_stream; | |
463 | p = firmware; | |
464 | l = file_size; | |
465 | while (l--) { | |
466 | byte = *p++; | |
467 | mask = 0x80; | |
468 | while (mask) { | |
469 | v = (byte & mask) ? BB_PIN_DIN : 0; | |
470 | mask >>= 1; | |
471 | *bbs++ = v | BB_PIN_CCLK; | |
472 | *bbs++ = v; | |
473 | } | |
474 | } | |
475 | g_free(firmware); | |
476 | ||
477 | /* The transformation completed successfully, return the result. */ | |
478 | *bb_cmd = bb_stream; | |
479 | *bb_cmd_size = bb_size; | |
480 | ||
481 | return SR_OK; | |
482 | } | |
483 | ||
484 | static int upload_firmware(struct sr_context *ctx, | |
485 | int firmware_idx, struct dev_context *devc) | |
486 | { | |
487 | int ret; | |
488 | unsigned char *buf; | |
489 | unsigned char pins; | |
490 | size_t buf_size; | |
491 | const char *firmware; | |
492 | ||
493 | /* Avoid downloading the same firmware multiple times. */ | |
494 | firmware = firmware_files[firmware_idx]; | |
495 | if (devc->cur_firmware == firmware_idx) { | |
496 | sr_info("Not uploading firmware file '%s' again.", firmware); | |
497 | return SR_OK; | |
498 | } | |
499 | ||
500 | /* Set the cable to bitbang mode. */ | |
501 | ret = ftdi_set_bitmode(&devc->ftdic, BB_PINMASK, BITMODE_BITBANG); | |
502 | if (ret < 0) { | |
503 | sr_err("ftdi_set_bitmode failed: %s", | |
504 | ftdi_get_error_string(&devc->ftdic)); | |
505 | return SR_ERR; | |
506 | } | |
507 | ret = ftdi_set_baudrate(&devc->ftdic, BB_BITRATE); | |
508 | if (ret < 0) { | |
509 | sr_err("ftdi_set_baudrate failed: %s", | |
510 | ftdi_get_error_string(&devc->ftdic)); | |
511 | return SR_ERR; | |
512 | } | |
513 | ||
514 | /* Initiate FPGA configuration mode. */ | |
515 | ret = sigma_fpga_init_bitbang(devc); | |
516 | if (ret) | |
517 | return ret; | |
518 | ||
519 | /* Prepare wire format of the firmware image. */ | |
520 | ret = sigma_fw_2_bitbang(ctx, firmware, &buf, &buf_size); | |
521 | if (ret != SR_OK) { | |
522 | sr_err("An error occurred while reading the firmware: %s", | |
523 | firmware); | |
524 | return ret; | |
525 | } | |
526 | ||
527 | /* Write the FPGA netlist to the cable. */ | |
528 | sr_info("Uploading firmware file '%s'.", firmware); | |
529 | sigma_write(buf, buf_size, devc); | |
530 | ||
531 | g_free(buf); | |
532 | ||
533 | /* Leave bitbang mode and discard pending input data. */ | |
534 | ret = ftdi_set_bitmode(&devc->ftdic, 0, BITMODE_RESET); | |
535 | if (ret < 0) { | |
536 | sr_err("ftdi_set_bitmode failed: %s", | |
537 | ftdi_get_error_string(&devc->ftdic)); | |
538 | return SR_ERR; | |
539 | } | |
540 | ftdi_usb_purge_buffers(&devc->ftdic); | |
541 | while (sigma_read(&pins, 1, devc) == 1) | |
542 | ; | |
543 | ||
544 | /* Initialize the FPGA for logic-analyzer mode. */ | |
545 | ret = sigma_fpga_init_la(devc); | |
546 | if (ret != SR_OK) | |
547 | return ret; | |
548 | ||
549 | /* Keep track of successful firmware download completion. */ | |
550 | devc->cur_firmware = firmware_idx; | |
551 | sr_info("Firmware uploaded."); | |
552 | ||
553 | return SR_OK; | |
554 | } | |
555 | ||
556 | /* | |
557 | * Sigma doesn't support limiting the number of samples, so we have to | |
558 | * translate the number and the samplerate to an elapsed time. | |
559 | * | |
560 | * In addition we need to ensure that the last data cluster has passed | |
561 | * the hardware pipeline, and became available to the PC side. With RLE | |
562 | * compression up to 327ms could pass before another cluster accumulates | |
563 | * at 200kHz samplerate when input pins don't change. | |
564 | */ | |
565 | SR_PRIV uint64_t sigma_limit_samples_to_msec(const struct dev_context *devc, | |
566 | uint64_t limit_samples) | |
567 | { | |
568 | uint64_t limit_msec; | |
569 | uint64_t worst_cluster_time_ms; | |
570 | ||
571 | limit_msec = limit_samples * 1000 / devc->cur_samplerate; | |
572 | worst_cluster_time_ms = 65536 * 1000 / devc->cur_samplerate; | |
573 | /* | |
574 | * One cluster time is not enough to flush pipeline when sampling | |
575 | * grounded pins with 1 sample limit at 200kHz. Hence the 2* fix. | |
576 | */ | |
577 | return limit_msec + 2 * worst_cluster_time_ms; | |
578 | } | |
579 | ||
580 | SR_PRIV int sigma_set_samplerate(const struct sr_dev_inst *sdi, uint64_t samplerate) | |
581 | { | |
582 | struct dev_context *devc; | |
583 | struct drv_context *drvc; | |
584 | size_t i; | |
585 | int ret; | |
586 | int num_channels; | |
587 | ||
588 | devc = sdi->priv; | |
589 | drvc = sdi->driver->context; | |
590 | ret = SR_OK; | |
591 | ||
592 | /* Reject rates that are not in the list of supported rates. */ | |
593 | for (i = 0; i < samplerates_count; i++) { | |
594 | if (samplerates[i] == samplerate) | |
595 | break; | |
596 | } | |
597 | if (i >= samplerates_count || samplerates[i] == 0) | |
598 | return SR_ERR_SAMPLERATE; | |
599 | ||
600 | /* | |
601 | * Depending on the samplerates of 200/100/50- MHz, specific | |
602 | * firmware is required and higher rates might limit the set | |
603 | * of available channels. | |
604 | */ | |
605 | num_channels = devc->num_channels; | |
606 | if (samplerate <= SR_MHZ(50)) { | |
607 | ret = upload_firmware(drvc->sr_ctx, 0, devc); | |
608 | num_channels = 16; | |
609 | } else if (samplerate == SR_MHZ(100)) { | |
610 | ret = upload_firmware(drvc->sr_ctx, 1, devc); | |
611 | num_channels = 8; | |
612 | } else if (samplerate == SR_MHZ(200)) { | |
613 | ret = upload_firmware(drvc->sr_ctx, 2, devc); | |
614 | num_channels = 4; | |
615 | } | |
616 | ||
617 | /* | |
618 | * Derive the sample period from the sample rate as well as the | |
619 | * number of samples that the device will communicate within | |
620 | * an "event" (memory organization internal to the device). | |
621 | */ | |
622 | if (ret == SR_OK) { | |
623 | devc->num_channels = num_channels; | |
624 | devc->cur_samplerate = samplerate; | |
625 | devc->samples_per_event = 16 / devc->num_channels; | |
626 | devc->state.state = SIGMA_IDLE; | |
627 | } | |
628 | ||
629 | /* | |
630 | * Support for "limit_samples" is implemented by stopping | |
631 | * acquisition after a corresponding period of time. | |
632 | * Re-calculate that period of time, in case the limit is | |
633 | * set first and the samplerate gets (re-)configured later. | |
634 | */ | |
635 | if (ret == SR_OK && devc->limit_samples) { | |
636 | uint64_t msecs; | |
637 | msecs = sigma_limit_samples_to_msec(devc, devc->limit_samples); | |
638 | devc->limit_msec = msecs; | |
639 | } | |
640 | ||
641 | return ret; | |
642 | } | |
643 | ||
644 | /* | |
645 | * In 100 and 200 MHz mode, only a single pin rising/falling can be | |
646 | * set as trigger. In other modes, two rising/falling triggers can be set, | |
647 | * in addition to value/mask trigger for any number of channels. | |
648 | * | |
649 | * The Sigma supports complex triggers using boolean expressions, but this | |
650 | * has not been implemented yet. | |
651 | */ | |
652 | SR_PRIV int sigma_convert_trigger(const struct sr_dev_inst *sdi) | |
653 | { | |
654 | struct dev_context *devc; | |
655 | struct sr_trigger *trigger; | |
656 | struct sr_trigger_stage *stage; | |
657 | struct sr_trigger_match *match; | |
658 | const GSList *l, *m; | |
659 | int channelbit, trigger_set; | |
660 | ||
661 | devc = sdi->priv; | |
662 | memset(&devc->trigger, 0, sizeof(struct sigma_trigger)); | |
663 | if (!(trigger = sr_session_trigger_get(sdi->session))) | |
664 | return SR_OK; | |
665 | ||
666 | trigger_set = 0; | |
667 | for (l = trigger->stages; l; l = l->next) { | |
668 | stage = l->data; | |
669 | for (m = stage->matches; m; m = m->next) { | |
670 | match = m->data; | |
671 | if (!match->channel->enabled) | |
672 | /* Ignore disabled channels with a trigger. */ | |
673 | continue; | |
674 | channelbit = 1 << (match->channel->index); | |
675 | if (devc->cur_samplerate >= SR_MHZ(100)) { | |
676 | /* Fast trigger support. */ | |
677 | if (trigger_set) { | |
678 | sr_err("Only a single pin trigger is " | |
679 | "supported in 100 and 200MHz mode."); | |
680 | return SR_ERR; | |
681 | } | |
682 | if (match->match == SR_TRIGGER_FALLING) | |
683 | devc->trigger.fallingmask |= channelbit; | |
684 | else if (match->match == SR_TRIGGER_RISING) | |
685 | devc->trigger.risingmask |= channelbit; | |
686 | else { | |
687 | sr_err("Only rising/falling trigger is " | |
688 | "supported in 100 and 200MHz mode."); | |
689 | return SR_ERR; | |
690 | } | |
691 | ||
692 | trigger_set++; | |
693 | } else { | |
694 | /* Simple trigger support (event). */ | |
695 | if (match->match == SR_TRIGGER_ONE) { | |
696 | devc->trigger.simplevalue |= channelbit; | |
697 | devc->trigger.simplemask |= channelbit; | |
698 | } else if (match->match == SR_TRIGGER_ZERO) { | |
699 | devc->trigger.simplevalue &= ~channelbit; | |
700 | devc->trigger.simplemask |= channelbit; | |
701 | } else if (match->match == SR_TRIGGER_FALLING) { | |
702 | devc->trigger.fallingmask |= channelbit; | |
703 | trigger_set++; | |
704 | } else if (match->match == SR_TRIGGER_RISING) { | |
705 | devc->trigger.risingmask |= channelbit; | |
706 | trigger_set++; | |
707 | } | |
708 | ||
709 | /* | |
710 | * Actually, Sigma supports 2 rising/falling triggers, | |
711 | * but they are ORed and the current trigger syntax | |
712 | * does not permit ORed triggers. | |
713 | */ | |
714 | if (trigger_set > 1) { | |
715 | sr_err("Only 1 rising/falling trigger " | |
716 | "is supported."); | |
717 | return SR_ERR; | |
718 | } | |
719 | } | |
720 | } | |
721 | } | |
722 | ||
723 | return SR_OK; | |
724 | } | |
725 | ||
726 | /* Software trigger to determine exact trigger position. */ | |
727 | static int get_trigger_offset(uint8_t *samples, uint16_t last_sample, | |
728 | struct sigma_trigger *t) | |
729 | { | |
730 | int i; | |
731 | uint16_t sample = 0; | |
732 | ||
733 | for (i = 0; i < 8; i++) { | |
734 | if (i > 0) | |
735 | last_sample = sample; | |
736 | sample = samples[2 * i] | (samples[2 * i + 1] << 8); | |
737 | ||
738 | /* Simple triggers. */ | |
739 | if ((sample & t->simplemask) != t->simplevalue) | |
740 | continue; | |
741 | ||
742 | /* Rising edge. */ | |
743 | if (((last_sample & t->risingmask) != 0) || | |
744 | ((sample & t->risingmask) != t->risingmask)) | |
745 | continue; | |
746 | ||
747 | /* Falling edge. */ | |
748 | if ((last_sample & t->fallingmask) != t->fallingmask || | |
749 | (sample & t->fallingmask) != 0) | |
750 | continue; | |
751 | ||
752 | break; | |
753 | } | |
754 | ||
755 | /* If we did not match, return original trigger pos. */ | |
756 | return i & 0x7; | |
757 | } | |
758 | ||
759 | /* | |
760 | * Return the timestamp of "DRAM cluster". | |
761 | */ | |
762 | static uint16_t sigma_dram_cluster_ts(struct sigma_dram_cluster *cluster) | |
763 | { | |
764 | return (cluster->timestamp_hi << 8) | cluster->timestamp_lo; | |
765 | } | |
766 | ||
767 | /* | |
768 | * Return one 16bit data entity of a DRAM cluster at the specified index. | |
769 | */ | |
770 | static uint16_t sigma_dram_cluster_data(struct sigma_dram_cluster *cl, int idx) | |
771 | { | |
772 | uint16_t sample; | |
773 | ||
774 | sample = 0; | |
775 | sample |= cl->samples[idx].sample_lo << 0; | |
776 | sample |= cl->samples[idx].sample_hi << 8; | |
777 | sample = (sample >> 8) | (sample << 8); | |
778 | return sample; | |
779 | } | |
780 | ||
781 | /* | |
782 | * Deinterlace sample data that was retrieved at 100MHz samplerate. | |
783 | * One 16bit item contains two samples of 8bits each. The bits of | |
784 | * multiple samples are interleaved. | |
785 | */ | |
786 | static uint16_t sigma_deinterlace_100mhz_data(uint16_t indata, int idx) | |
787 | { | |
788 | uint16_t outdata; | |
789 | ||
790 | indata >>= idx; | |
791 | outdata = 0; | |
792 | outdata |= (indata >> (0 * 2 - 0)) & (1 << 0); | |
793 | outdata |= (indata >> (1 * 2 - 1)) & (1 << 1); | |
794 | outdata |= (indata >> (2 * 2 - 2)) & (1 << 2); | |
795 | outdata |= (indata >> (3 * 2 - 3)) & (1 << 3); | |
796 | outdata |= (indata >> (4 * 2 - 4)) & (1 << 4); | |
797 | outdata |= (indata >> (5 * 2 - 5)) & (1 << 5); | |
798 | outdata |= (indata >> (6 * 2 - 6)) & (1 << 6); | |
799 | outdata |= (indata >> (7 * 2 - 7)) & (1 << 7); | |
800 | return outdata; | |
801 | } | |
802 | ||
803 | /* | |
804 | * Deinterlace sample data that was retrieved at 200MHz samplerate. | |
805 | * One 16bit item contains four samples of 4bits each. The bits of | |
806 | * multiple samples are interleaved. | |
807 | */ | |
808 | static uint16_t sigma_deinterlace_200mhz_data(uint16_t indata, int idx) | |
809 | { | |
810 | uint16_t outdata; | |
811 | ||
812 | indata >>= idx; | |
813 | outdata = 0; | |
814 | outdata |= (indata >> (0 * 4 - 0)) & (1 << 0); | |
815 | outdata |= (indata >> (1 * 4 - 1)) & (1 << 1); | |
816 | outdata |= (indata >> (2 * 4 - 2)) & (1 << 2); | |
817 | outdata |= (indata >> (3 * 4 - 3)) & (1 << 3); | |
818 | return outdata; | |
819 | } | |
820 | ||
821 | static void store_sr_sample(uint8_t *samples, int idx, uint16_t data) | |
822 | { | |
823 | samples[2 * idx + 0] = (data >> 0) & 0xff; | |
824 | samples[2 * idx + 1] = (data >> 8) & 0xff; | |
825 | } | |
826 | ||
827 | /* | |
828 | * Local wrapper around sr_session_send() calls. Make sure to not send | |
829 | * more samples to the session's datafeed than what was requested by a | |
830 | * previously configured (optional) sample count. | |
831 | */ | |
832 | static void sigma_session_send(struct sr_dev_inst *sdi, | |
833 | struct sr_datafeed_packet *packet) | |
834 | { | |
835 | struct dev_context *devc; | |
836 | struct sr_datafeed_logic *logic; | |
837 | uint64_t send_now; | |
838 | ||
839 | devc = sdi->priv; | |
840 | if (devc->limit_samples) { | |
841 | logic = (void *)packet->payload; | |
842 | send_now = logic->length / logic->unitsize; | |
843 | if (devc->sent_samples + send_now > devc->limit_samples) { | |
844 | send_now = devc->limit_samples - devc->sent_samples; | |
845 | logic->length = send_now * logic->unitsize; | |
846 | } | |
847 | if (!send_now) | |
848 | return; | |
849 | devc->sent_samples += send_now; | |
850 | } | |
851 | ||
852 | sr_session_send(sdi, packet); | |
853 | } | |
854 | ||
855 | /* | |
856 | * This size translates to: event count (1K events per cluster), times | |
857 | * the sample width (unitsize, 16bits per event), times the maximum | |
858 | * number of samples per event. | |
859 | */ | |
860 | #define SAMPLES_BUFFER_SIZE (1024 * 2 * 4) | |
861 | ||
862 | static void sigma_decode_dram_cluster(struct sigma_dram_cluster *dram_cluster, | |
863 | unsigned int events_in_cluster, | |
864 | unsigned int triggered, | |
865 | struct sr_dev_inst *sdi) | |
866 | { | |
867 | struct dev_context *devc = sdi->priv; | |
868 | struct sigma_state *ss = &devc->state; | |
869 | struct sr_datafeed_packet packet; | |
870 | struct sr_datafeed_logic logic; | |
871 | uint16_t tsdiff, ts, sample, item16; | |
872 | uint8_t samples[SAMPLES_BUFFER_SIZE]; | |
873 | uint8_t *send_ptr; | |
874 | size_t send_count, trig_count; | |
875 | unsigned int i; | |
876 | int j; | |
877 | ||
878 | ts = sigma_dram_cluster_ts(dram_cluster); | |
879 | tsdiff = ts - ss->lastts; | |
880 | ss->lastts = ts + EVENTS_PER_CLUSTER; | |
881 | ||
882 | packet.type = SR_DF_LOGIC; | |
883 | packet.payload = &logic; | |
884 | logic.unitsize = 2; | |
885 | logic.data = samples; | |
886 | ||
887 | /* | |
888 | * If this cluster is not adjacent to the previously received | |
889 | * cluster, then send the appropriate number of samples with the | |
890 | * previous values to the sigrok session. This "decodes RLE". | |
891 | */ | |
892 | for (ts = 0; ts < tsdiff; ts++) { | |
893 | i = ts % 1024; | |
894 | store_sr_sample(samples, i, ss->lastsample); | |
895 | ||
896 | /* | |
897 | * If we have 1024 samples ready or we're at the | |
898 | * end of submitting the padding samples, submit | |
899 | * the packet to Sigrok. Since constant data is | |
900 | * sent, duplication of data for rates above 50MHz | |
901 | * is simple. | |
902 | */ | |
903 | if ((i == 1023) || (ts == tsdiff - 1)) { | |
904 | logic.length = (i + 1) * logic.unitsize; | |
905 | for (j = 0; j < devc->samples_per_event; j++) | |
906 | sigma_session_send(sdi, &packet); | |
907 | } | |
908 | } | |
909 | ||
910 | /* | |
911 | * Parse the samples in current cluster and prepare them | |
912 | * to be submitted to Sigrok. Cope with memory layouts that | |
913 | * vary with the samplerate. | |
914 | */ | |
915 | send_ptr = &samples[0]; | |
916 | send_count = 0; | |
917 | sample = 0; | |
918 | for (i = 0; i < events_in_cluster; i++) { | |
919 | item16 = sigma_dram_cluster_data(dram_cluster, i); | |
920 | if (devc->cur_samplerate == SR_MHZ(200)) { | |
921 | sample = sigma_deinterlace_200mhz_data(item16, 0); | |
922 | store_sr_sample(samples, send_count++, sample); | |
923 | sample = sigma_deinterlace_200mhz_data(item16, 1); | |
924 | store_sr_sample(samples, send_count++, sample); | |
925 | sample = sigma_deinterlace_200mhz_data(item16, 2); | |
926 | store_sr_sample(samples, send_count++, sample); | |
927 | sample = sigma_deinterlace_200mhz_data(item16, 3); | |
928 | store_sr_sample(samples, send_count++, sample); | |
929 | } else if (devc->cur_samplerate == SR_MHZ(100)) { | |
930 | sample = sigma_deinterlace_100mhz_data(item16, 0); | |
931 | store_sr_sample(samples, send_count++, sample); | |
932 | sample = sigma_deinterlace_100mhz_data(item16, 1); | |
933 | store_sr_sample(samples, send_count++, sample); | |
934 | } else { | |
935 | sample = item16; | |
936 | store_sr_sample(samples, send_count++, sample); | |
937 | } | |
938 | } | |
939 | ||
940 | /* | |
941 | * If a trigger position applies, then provide the datafeed with | |
942 | * the first part of data up to that position, then send the | |
943 | * trigger marker. | |
944 | */ | |
945 | int trigger_offset = 0; | |
946 | if (triggered) { | |
947 | /* | |
948 | * Trigger is not always accurate to sample because of | |
949 | * pipeline delay. However, it always triggers before | |
950 | * the actual event. We therefore look at the next | |
951 | * samples to pinpoint the exact position of the trigger. | |
952 | */ | |
953 | trigger_offset = get_trigger_offset(samples, | |
954 | ss->lastsample, &devc->trigger); | |
955 | ||
956 | if (trigger_offset > 0) { | |
957 | trig_count = trigger_offset * devc->samples_per_event; | |
958 | packet.type = SR_DF_LOGIC; | |
959 | logic.length = trig_count * logic.unitsize; | |
960 | sigma_session_send(sdi, &packet); | |
961 | send_ptr += trig_count * logic.unitsize; | |
962 | send_count -= trig_count; | |
963 | } | |
964 | ||
965 | /* Only send trigger if explicitly enabled. */ | |
966 | if (devc->use_triggers) | |
967 | std_session_send_df_trigger(sdi); | |
968 | } | |
969 | ||
970 | /* | |
971 | * Send the data after the trigger, or all of the received data | |
972 | * if no trigger position applies. | |
973 | */ | |
974 | if (send_count) { | |
975 | packet.type = SR_DF_LOGIC; | |
976 | logic.length = send_count * logic.unitsize; | |
977 | logic.data = send_ptr; | |
978 | sigma_session_send(sdi, &packet); | |
979 | } | |
980 | ||
981 | ss->lastsample = sample; | |
982 | } | |
983 | ||
984 | /* | |
985 | * Decode chunk of 1024 bytes, 64 clusters, 7 events per cluster. | |
986 | * Each event is 20ns apart, and can contain multiple samples. | |
987 | * | |
988 | * For 200 MHz, events contain 4 samples for each channel, spread 5 ns apart. | |
989 | * For 100 MHz, events contain 2 samples for each channel, spread 10 ns apart. | |
990 | * For 50 MHz and below, events contain one sample for each channel, | |
991 | * spread 20 ns apart. | |
992 | */ | |
993 | static int decode_chunk_ts(struct sigma_dram_line *dram_line, | |
994 | uint16_t events_in_line, | |
995 | uint32_t trigger_event, | |
996 | struct sr_dev_inst *sdi) | |
997 | { | |
998 | struct sigma_dram_cluster *dram_cluster; | |
999 | struct dev_context *devc; | |
1000 | unsigned int clusters_in_line; | |
1001 | unsigned int events_in_cluster; | |
1002 | unsigned int i; | |
1003 | uint32_t trigger_cluster, triggered; | |
1004 | ||
1005 | devc = sdi->priv; | |
1006 | clusters_in_line = events_in_line; | |
1007 | clusters_in_line += EVENTS_PER_CLUSTER - 1; | |
1008 | clusters_in_line /= EVENTS_PER_CLUSTER; | |
1009 | trigger_cluster = ~0; | |
1010 | triggered = 0; | |
1011 | ||
1012 | /* Check if trigger is in this chunk. */ | |
1013 | if (trigger_event < (64 * 7)) { | |
1014 | if (devc->cur_samplerate <= SR_MHZ(50)) { | |
1015 | trigger_event -= MIN(EVENTS_PER_CLUSTER - 1, | |
1016 | trigger_event); | |
1017 | } | |
1018 | ||
1019 | /* Find in which cluster the trigger occurred. */ | |
1020 | trigger_cluster = trigger_event / EVENTS_PER_CLUSTER; | |
1021 | } | |
1022 | ||
1023 | /* For each full DRAM cluster. */ | |
1024 | for (i = 0; i < clusters_in_line; i++) { | |
1025 | dram_cluster = &dram_line->cluster[i]; | |
1026 | ||
1027 | /* The last cluster might not be full. */ | |
1028 | if ((i == clusters_in_line - 1) && | |
1029 | (events_in_line % EVENTS_PER_CLUSTER)) { | |
1030 | events_in_cluster = events_in_line % EVENTS_PER_CLUSTER; | |
1031 | } else { | |
1032 | events_in_cluster = EVENTS_PER_CLUSTER; | |
1033 | } | |
1034 | ||
1035 | triggered = (i == trigger_cluster); | |
1036 | sigma_decode_dram_cluster(dram_cluster, events_in_cluster, | |
1037 | triggered, sdi); | |
1038 | } | |
1039 | ||
1040 | return SR_OK; | |
1041 | } | |
1042 | ||
1043 | static int download_capture(struct sr_dev_inst *sdi) | |
1044 | { | |
1045 | const uint32_t chunks_per_read = 32; | |
1046 | ||
1047 | struct dev_context *devc; | |
1048 | struct sigma_dram_line *dram_line; | |
1049 | int bufsz; | |
1050 | uint32_t stoppos, triggerpos; | |
1051 | uint8_t modestatus; | |
1052 | uint32_t i; | |
1053 | uint32_t dl_lines_total, dl_lines_curr, dl_lines_done; | |
1054 | uint32_t dl_first_line, dl_line; | |
1055 | uint32_t dl_events_in_line; | |
1056 | uint32_t trg_line, trg_event; | |
1057 | ||
1058 | devc = sdi->priv; | |
1059 | dl_events_in_line = 64 * 7; | |
1060 | ||
1061 | sr_info("Downloading sample data."); | |
1062 | devc->state.state = SIGMA_DOWNLOAD; | |
1063 | ||
1064 | /* | |
1065 | * Ask the hardware to stop data acquisition. Reception of the | |
1066 | * FORCESTOP request makes the hardware "disable RLE" (store | |
1067 | * clusters to DRAM regardless of whether pin state changes) and | |
1068 | * raise the POSTTRIGGERED flag. | |
1069 | */ | |
1070 | sigma_set_register(WRITE_MODE, WMR_FORCESTOP | WMR_SDRAMWRITEEN, devc); | |
1071 | do { | |
1072 | if (sigma_read_register(READ_MODE, &modestatus, 1, devc) != 1) { | |
1073 | sr_err("failed while waiting for RMR_POSTTRIGGERED bit"); | |
1074 | return FALSE; | |
1075 | } | |
1076 | } while (!(modestatus & RMR_POSTTRIGGERED)); | |
1077 | ||
1078 | /* Set SDRAM Read Enable. */ | |
1079 | sigma_set_register(WRITE_MODE, WMR_SDRAMREADEN, devc); | |
1080 | ||
1081 | /* Get the current position. */ | |
1082 | sigma_read_pos(&stoppos, &triggerpos, devc); | |
1083 | ||
1084 | /* Check if trigger has fired. */ | |
1085 | if (sigma_read_register(READ_MODE, &modestatus, 1, devc) != 1) { | |
1086 | sr_err("failed to read READ_MODE register"); | |
1087 | return FALSE; | |
1088 | } | |
1089 | trg_line = ~0; | |
1090 | trg_event = ~0; | |
1091 | if (modestatus & RMR_TRIGGERED) { | |
1092 | trg_line = triggerpos >> 9; | |
1093 | trg_event = triggerpos & 0x1ff; | |
1094 | } | |
1095 | ||
1096 | devc->sent_samples = 0; | |
1097 | ||
1098 | /* | |
1099 | * Determine how many "DRAM lines" of 1024 bytes each we need to | |
1100 | * retrieve from the Sigma hardware, so that we have a complete | |
1101 | * set of samples. Note that the last line need not contain 64 | |
1102 | * clusters, it might be partially filled only. | |
1103 | * | |
1104 | * When RMR_ROUND is set, the circular buffer in DRAM has wrapped | |
1105 | * around. Since the status of the very next line is uncertain in | |
1106 | * that case, we skip it and start reading from the next line. The | |
1107 | * circular buffer has 32K lines (0x8000). | |
1108 | */ | |
1109 | dl_lines_total = (stoppos >> 9) + 1; | |
1110 | if (modestatus & RMR_ROUND) { | |
1111 | dl_first_line = dl_lines_total + 1; | |
1112 | dl_lines_total = 0x8000 - 2; | |
1113 | } else { | |
1114 | dl_first_line = 0; | |
1115 | } | |
1116 | dram_line = g_try_malloc0(chunks_per_read * sizeof(*dram_line)); | |
1117 | if (!dram_line) | |
1118 | return FALSE; | |
1119 | dl_lines_done = 0; | |
1120 | while (dl_lines_total > dl_lines_done) { | |
1121 | /* We can download only up-to 32 DRAM lines in one go! */ | |
1122 | dl_lines_curr = MIN(chunks_per_read, dl_lines_total - dl_lines_done); | |
1123 | ||
1124 | dl_line = dl_first_line + dl_lines_done; | |
1125 | dl_line %= 0x8000; | |
1126 | bufsz = sigma_read_dram(dl_line, dl_lines_curr, | |
1127 | (uint8_t *)dram_line, devc); | |
1128 | /* TODO: Check bufsz. For now, just avoid compiler warnings. */ | |
1129 | (void)bufsz; | |
1130 | ||
1131 | /* This is the first DRAM line, so find the initial timestamp. */ | |
1132 | if (dl_lines_done == 0) { | |
1133 | devc->state.lastts = | |
1134 | sigma_dram_cluster_ts(&dram_line[0].cluster[0]); | |
1135 | devc->state.lastsample = 0; | |
1136 | } | |
1137 | ||
1138 | for (i = 0; i < dl_lines_curr; i++) { | |
1139 | uint32_t trigger_event = ~0; | |
1140 | /* The last "DRAM line" can be only partially full. */ | |
1141 | if (dl_lines_done + i == dl_lines_total - 1) | |
1142 | dl_events_in_line = stoppos & 0x1ff; | |
1143 | ||
1144 | /* Test if the trigger happened on this line. */ | |
1145 | if (dl_lines_done + i == trg_line) | |
1146 | trigger_event = trg_event; | |
1147 | ||
1148 | decode_chunk_ts(dram_line + i, dl_events_in_line, | |
1149 | trigger_event, sdi); | |
1150 | } | |
1151 | ||
1152 | dl_lines_done += dl_lines_curr; | |
1153 | } | |
1154 | g_free(dram_line); | |
1155 | ||
1156 | std_session_send_df_end(sdi); | |
1157 | ||
1158 | devc->state.state = SIGMA_IDLE; | |
1159 | sr_dev_acquisition_stop(sdi); | |
1160 | ||
1161 | return TRUE; | |
1162 | } | |
1163 | ||
1164 | /* | |
1165 | * Periodically check the Sigma status when in CAPTURE mode. This routine | |
1166 | * checks whether the configured sample count or sample time have passed, | |
1167 | * and will stop acquisition and download the acquired samples. | |
1168 | */ | |
1169 | static int sigma_capture_mode(struct sr_dev_inst *sdi) | |
1170 | { | |
1171 | struct dev_context *devc; | |
1172 | uint64_t running_msec; | |
1173 | uint64_t current_time; | |
1174 | ||
1175 | devc = sdi->priv; | |
1176 | ||
1177 | /* | |
1178 | * Check if the selected sampling duration passed. Sample count | |
1179 | * limits are covered by this enforced timeout as well. | |
1180 | */ | |
1181 | current_time = g_get_monotonic_time(); | |
1182 | running_msec = (current_time - devc->start_time) / 1000; | |
1183 | if (running_msec >= devc->limit_msec) | |
1184 | return download_capture(sdi); | |
1185 | ||
1186 | return TRUE; | |
1187 | } | |
1188 | ||
1189 | SR_PRIV int sigma_receive_data(int fd, int revents, void *cb_data) | |
1190 | { | |
1191 | struct sr_dev_inst *sdi; | |
1192 | struct dev_context *devc; | |
1193 | ||
1194 | (void)fd; | |
1195 | (void)revents; | |
1196 | ||
1197 | sdi = cb_data; | |
1198 | devc = sdi->priv; | |
1199 | ||
1200 | if (devc->state.state == SIGMA_IDLE) | |
1201 | return TRUE; | |
1202 | ||
1203 | /* | |
1204 | * When the application has requested to stop the acquisition, | |
1205 | * then immediately start downloading sample data. Otherwise | |
1206 | * keep checking configured limits which will terminate the | |
1207 | * acquisition and initiate download. | |
1208 | */ | |
1209 | if (devc->state.state == SIGMA_STOPPING) | |
1210 | return download_capture(sdi); | |
1211 | if (devc->state.state == SIGMA_CAPTURE) | |
1212 | return sigma_capture_mode(sdi); | |
1213 | ||
1214 | return TRUE; | |
1215 | } | |
1216 | ||
1217 | /* Build a LUT entry used by the trigger functions. */ | |
1218 | static void build_lut_entry(uint16_t value, uint16_t mask, uint16_t *entry) | |
1219 | { | |
1220 | int i, j, k, bit; | |
1221 | ||
1222 | /* For each quad channel. */ | |
1223 | for (i = 0; i < 4; i++) { | |
1224 | entry[i] = 0xffff; | |
1225 | ||
1226 | /* For each bit in LUT. */ | |
1227 | for (j = 0; j < 16; j++) | |
1228 | ||
1229 | /* For each channel in quad. */ | |
1230 | for (k = 0; k < 4; k++) { | |
1231 | bit = 1 << (i * 4 + k); | |
1232 | ||
1233 | /* Set bit in entry */ | |
1234 | if ((mask & bit) && ((!(value & bit)) != | |
1235 | (!(j & (1 << k))))) | |
1236 | entry[i] &= ~(1 << j); | |
1237 | } | |
1238 | } | |
1239 | } | |
1240 | ||
1241 | /* Add a logical function to LUT mask. */ | |
1242 | static void add_trigger_function(enum triggerop oper, enum triggerfunc func, | |
1243 | int index, int neg, uint16_t *mask) | |
1244 | { | |
1245 | int i, j; | |
1246 | int x[2][2], tmp, a, b, aset, bset, rset; | |
1247 | ||
1248 | memset(x, 0, 4 * sizeof(int)); | |
1249 | ||
1250 | /* Trigger detect condition. */ | |
1251 | switch (oper) { | |
1252 | case OP_LEVEL: | |
1253 | x[0][1] = 1; | |
1254 | x[1][1] = 1; | |
1255 | break; | |
1256 | case OP_NOT: | |
1257 | x[0][0] = 1; | |
1258 | x[1][0] = 1; | |
1259 | break; | |
1260 | case OP_RISE: | |
1261 | x[0][1] = 1; | |
1262 | break; | |
1263 | case OP_FALL: | |
1264 | x[1][0] = 1; | |
1265 | break; | |
1266 | case OP_RISEFALL: | |
1267 | x[0][1] = 1; | |
1268 | x[1][0] = 1; | |
1269 | break; | |
1270 | case OP_NOTRISE: | |
1271 | x[1][1] = 1; | |
1272 | x[0][0] = 1; | |
1273 | x[1][0] = 1; | |
1274 | break; | |
1275 | case OP_NOTFALL: | |
1276 | x[1][1] = 1; | |
1277 | x[0][0] = 1; | |
1278 | x[0][1] = 1; | |
1279 | break; | |
1280 | case OP_NOTRISEFALL: | |
1281 | x[1][1] = 1; | |
1282 | x[0][0] = 1; | |
1283 | break; | |
1284 | } | |
1285 | ||
1286 | /* Transpose if neg is set. */ | |
1287 | if (neg) { | |
1288 | for (i = 0; i < 2; i++) { | |
1289 | for (j = 0; j < 2; j++) { | |
1290 | tmp = x[i][j]; | |
1291 | x[i][j] = x[1 - i][1 - j]; | |
1292 | x[1 - i][1 - j] = tmp; | |
1293 | } | |
1294 | } | |
1295 | } | |
1296 | ||
1297 | /* Update mask with function. */ | |
1298 | for (i = 0; i < 16; i++) { | |
1299 | a = (i >> (2 * index + 0)) & 1; | |
1300 | b = (i >> (2 * index + 1)) & 1; | |
1301 | ||
1302 | aset = (*mask >> i) & 1; | |
1303 | bset = x[b][a]; | |
1304 | ||
1305 | rset = 0; | |
1306 | if (func == FUNC_AND || func == FUNC_NAND) | |
1307 | rset = aset & bset; | |
1308 | else if (func == FUNC_OR || func == FUNC_NOR) | |
1309 | rset = aset | bset; | |
1310 | else if (func == FUNC_XOR || func == FUNC_NXOR) | |
1311 | rset = aset ^ bset; | |
1312 | ||
1313 | if (func == FUNC_NAND || func == FUNC_NOR || func == FUNC_NXOR) | |
1314 | rset = !rset; | |
1315 | ||
1316 | *mask &= ~(1 << i); | |
1317 | ||
1318 | if (rset) | |
1319 | *mask |= 1 << i; | |
1320 | } | |
1321 | } | |
1322 | ||
1323 | /* | |
1324 | * Build trigger LUTs used by 50 MHz and lower sample rates for supporting | |
1325 | * simple pin change and state triggers. Only two transitions (rise/fall) can be | |
1326 | * set at any time, but a full mask and value can be set (0/1). | |
1327 | */ | |
1328 | SR_PRIV int sigma_build_basic_trigger(struct triggerlut *lut, struct dev_context *devc) | |
1329 | { | |
1330 | int i,j; | |
1331 | uint16_t masks[2] = { 0, 0 }; | |
1332 | ||
1333 | memset(lut, 0, sizeof(struct triggerlut)); | |
1334 | ||
1335 | /* Constant for simple triggers. */ | |
1336 | lut->m4 = 0xa000; | |
1337 | ||
1338 | /* Value/mask trigger support. */ | |
1339 | build_lut_entry(devc->trigger.simplevalue, devc->trigger.simplemask, | |
1340 | lut->m2d); | |
1341 | ||
1342 | /* Rise/fall trigger support. */ | |
1343 | for (i = 0, j = 0; i < 16; i++) { | |
1344 | if (devc->trigger.risingmask & (1 << i) || | |
1345 | devc->trigger.fallingmask & (1 << i)) | |
1346 | masks[j++] = 1 << i; | |
1347 | } | |
1348 | ||
1349 | build_lut_entry(masks[0], masks[0], lut->m0d); | |
1350 | build_lut_entry(masks[1], masks[1], lut->m1d); | |
1351 | ||
1352 | /* Add glue logic */ | |
1353 | if (masks[0] || masks[1]) { | |
1354 | /* Transition trigger. */ | |
1355 | if (masks[0] & devc->trigger.risingmask) | |
1356 | add_trigger_function(OP_RISE, FUNC_OR, 0, 0, &lut->m3); | |
1357 | if (masks[0] & devc->trigger.fallingmask) | |
1358 | add_trigger_function(OP_FALL, FUNC_OR, 0, 0, &lut->m3); | |
1359 | if (masks[1] & devc->trigger.risingmask) | |
1360 | add_trigger_function(OP_RISE, FUNC_OR, 1, 0, &lut->m3); | |
1361 | if (masks[1] & devc->trigger.fallingmask) | |
1362 | add_trigger_function(OP_FALL, FUNC_OR, 1, 0, &lut->m3); | |
1363 | } else { | |
1364 | /* Only value/mask trigger. */ | |
1365 | lut->m3 = 0xffff; | |
1366 | } | |
1367 | ||
1368 | /* Triggertype: event. */ | |
1369 | lut->params.selres = 3; | |
1370 | ||
1371 | return SR_OK; | |
1372 | } |