]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2014 Bert Vermeulen <bert@biot.com> | |
5 | * Copyright (C) 2015 Google, Inc. | |
6 | * (Written by Alexandru Gagniuc <mrnuke@google.com> for Google, Inc.) | |
7 | * | |
8 | * This program is free software: you can redistribute it and/or modify | |
9 | * it under the terms of the GNU General Public License as published by | |
10 | * the Free Software Foundation, either version 3 of the License, or | |
11 | * (at your option) any later version. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, | |
14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | * GNU General Public License for more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License | |
19 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
20 | */ | |
21 | ||
22 | #include <config.h> | |
23 | #include <string.h> | |
24 | #include <strings.h> | |
25 | #include "protocol.h" | |
26 | ||
27 | #define CH_IDX(x) (1 << x) | |
28 | #define FREQ_DC_ONLY {0, 0, 0, 0, 0} | |
29 | ||
30 | /* Agilent/Keysight N5700A series */ | |
31 | static const uint32_t agilent_n5700a_devopts[] = { | |
32 | SR_CONF_CONTINUOUS, | |
33 | }; | |
34 | ||
35 | static const uint32_t agilent_n5700a_devopts_cg[] = { | |
36 | SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, | |
37 | SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
38 | SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, | |
39 | SR_CONF_VOLTAGE | SR_CONF_GET, | |
40 | SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
41 | SR_CONF_CURRENT | SR_CONF_GET, | |
42 | SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
43 | }; | |
44 | ||
45 | static const struct channel_group_spec agilent_n5700a_cg[] = { | |
46 | { "1", CH_IDX(0), PPS_OVP | PPS_OCP }, | |
47 | }; | |
48 | ||
49 | static const struct channel_spec agilent_n5767a_ch[] = { | |
50 | { "1", { 0, 60, 0.0072, 3, 4 }, { 0, 25, 0.003, 3, 4 }, { 0, 1500 }, FREQ_DC_ONLY }, | |
51 | }; | |
52 | ||
53 | static const struct channel_spec agilent_n5763a_ch[] = { | |
54 | { "1", { 0, 12.5, 0.0015, 3, 4 }, { 0, 120, 0.0144, 3, 4 }, { 0, 1500 }, FREQ_DC_ONLY }, | |
55 | }; | |
56 | ||
57 | /* | |
58 | * TODO: OVER_CURRENT_PROTECTION_ACTIVE status can be determined by the OC bit | |
59 | * in STAT:QUES:EVEN?, but this is not implemented. | |
60 | */ | |
61 | static const struct scpi_command agilent_n5700a_cmd[] = { | |
62 | { SCPI_CMD_REMOTE, "SYST:COMM:RLST REM" }, | |
63 | { SCPI_CMD_LOCAL, "SYST:COMM:RLST LOC" }, | |
64 | { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" }, | |
65 | { SCPI_CMD_GET_MEAS_CURRENT, "MEAS:CURR?" }, | |
66 | { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" }, | |
67 | { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.6f" }, | |
68 | { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" }, | |
69 | { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" }, | |
70 | { SCPI_CMD_GET_OUTPUT_ENABLED, ":OUTP:STAT?" }, | |
71 | { SCPI_CMD_SET_OUTPUT_ENABLE, ":OUTP ON" }, | |
72 | { SCPI_CMD_SET_OUTPUT_DISABLE, ":OUTP OFF" }, | |
73 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":VOLT:PROT?" }, | |
74 | { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":VOLT:PROT %.6f" }, | |
75 | { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ENABLED, ":CURR:PROT:STAT?" }, | |
76 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, ":CURR:PROT:STAT ON?"}, | |
77 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, ":CURR:PROT:STAT OFF?"}, | |
78 | /* Current limit (CC mode) and OCP are set using the same command. */ | |
79 | { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR?" }, | |
80 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR %.6f" }, | |
81 | ALL_ZERO | |
82 | }; | |
83 | ||
84 | /* Chroma 61600 series AC source */ | |
85 | static const uint32_t chroma_61604_devopts[] = { | |
86 | SR_CONF_CONTINUOUS, | |
87 | }; | |
88 | ||
89 | static const uint32_t chroma_61604_devopts_cg[] = { | |
90 | SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, | |
91 | SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, | |
92 | SR_CONF_VOLTAGE | SR_CONF_GET, | |
93 | SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
94 | SR_CONF_OUTPUT_FREQUENCY | SR_CONF_GET, | |
95 | SR_CONF_OUTPUT_FREQUENCY_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
96 | SR_CONF_CURRENT | SR_CONF_GET, | |
97 | SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
98 | }; | |
99 | ||
100 | static const struct channel_spec chroma_61604_ch[] = { | |
101 | { "1", { 0, 300, 0.1, 1, 1 }, { 0, 16, 0.1, 2, 2 }, { 0, 2000, 0, 1, 1 }, { 1.0, 1000.0, 0.01 } }, | |
102 | }; | |
103 | ||
104 | static const struct channel_group_spec chroma_61604_cg[] = { | |
105 | { "1", CH_IDX(0), PPS_OVP | PPS_OCP }, | |
106 | }; | |
107 | ||
108 | static const struct scpi_command chroma_61604_cmd[] = { | |
109 | { SCPI_CMD_REMOTE, "SYST:REM" }, | |
110 | { SCPI_CMD_LOCAL, "SYST:LOC" }, | |
111 | { SCPI_CMD_GET_MEAS_VOLTAGE, ":FETC:VOLT:ACDC?" }, | |
112 | { SCPI_CMD_GET_MEAS_FREQUENCY, ":FETC:FREQ?" }, | |
113 | { SCPI_CMD_GET_MEAS_CURRENT, ":FETC:CURR:AC?" }, | |
114 | { SCPI_CMD_GET_MEAS_POWER, ":FETC:POW:AC?" }, | |
115 | { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT:AC?" }, | |
116 | { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT:AC %.1f" }, | |
117 | { SCPI_CMD_GET_FREQUENCY_TARGET, ":SOUR:FREQ?" }, | |
118 | { SCPI_CMD_SET_FREQUENCY_TARGET, ":SOUR:FREQ %.2f" }, | |
119 | { SCPI_CMD_GET_OUTPUT_ENABLED, ":OUTP?" }, | |
120 | { SCPI_CMD_SET_OUTPUT_ENABLE, ":OUTP ON" }, | |
121 | { SCPI_CMD_SET_OUTPUT_DISABLE, ":OUTP OFF" }, | |
122 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:LIM:AC?" }, | |
123 | { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:LIM:AC %.1f" }, | |
124 | /* This is not a current limit mode. It is overcurrent protection. */ | |
125 | { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR:LIM?" }, | |
126 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR:LIM %.2f" }, | |
127 | ALL_ZERO | |
128 | }; | |
129 | ||
130 | /* Chroma 62000 series DC source */ | |
131 | static const uint32_t chroma_62000_devopts[] = { | |
132 | SR_CONF_CONTINUOUS, | |
133 | }; | |
134 | ||
135 | static const uint32_t chroma_62000_devopts_cg[] = { | |
136 | SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, | |
137 | SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, | |
138 | SR_CONF_VOLTAGE | SR_CONF_GET, | |
139 | SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
140 | SR_CONF_CURRENT | SR_CONF_GET, | |
141 | SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
142 | SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
143 | }; | |
144 | ||
145 | static const struct channel_group_spec chroma_62000_cg[] = { | |
146 | { "1", CH_IDX(0), PPS_OVP | PPS_OCP }, | |
147 | }; | |
148 | ||
149 | static const struct scpi_command chroma_62000_cmd[] = { | |
150 | { SCPI_CMD_REMOTE, ":CONF:REM ON" }, | |
151 | { SCPI_CMD_LOCAL, ":CONF:REM OFF" }, | |
152 | { SCPI_CMD_BEEPER, ":CONF:BEEP?" }, | |
153 | { SCPI_CMD_BEEPER_ENABLE, ":CONF:BEEP ON" }, | |
154 | { SCPI_CMD_BEEPER_DISABLE, ":CONF:BEEP OFF" }, | |
155 | { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" }, | |
156 | { SCPI_CMD_GET_MEAS_CURRENT, ":MEAS:CURR?" }, | |
157 | { SCPI_CMD_GET_MEAS_POWER, ":MEAS:POW?" }, | |
158 | { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" }, | |
159 | { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.2f" }, | |
160 | { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" }, | |
161 | { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" }, | |
162 | { SCPI_CMD_GET_OUTPUT_ENABLED, ":CONF:OUTP?" }, | |
163 | { SCPI_CMD_SET_OUTPUT_ENABLE, ":CONF:OUTP ON" }, | |
164 | { SCPI_CMD_SET_OUTPUT_DISABLE, ":CONF:OUTP OFF" }, | |
165 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT:HIGH?" }, | |
166 | { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT:HIGH %.6f" }, | |
167 | { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR:PROT:HIGH?" }, | |
168 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR:PROT:HIGH %.6f" }, | |
169 | ALL_ZERO | |
170 | }; | |
171 | ||
172 | static int chroma_62000p_probe_channels(struct sr_dev_inst *sdi, | |
173 | struct sr_scpi_hw_info *hw_info, | |
174 | struct channel_spec **channels, unsigned int *num_channels, | |
175 | struct channel_group_spec **channel_groups, | |
176 | unsigned int *num_channel_groups) | |
177 | { | |
178 | unsigned int volts, amps, watts; | |
179 | struct channel_spec *channel; | |
180 | ||
181 | (void)sdi; | |
182 | ||
183 | sscanf(hw_info->model, "620%uP-%u-%u", &watts, &volts, &s); | |
184 | watts *= 100; | |
185 | sr_dbg("Found device rated for %d V, %d A and %d W", volts, amps, watts); | |
186 | ||
187 | if (volts > 600) { | |
188 | sr_err("Probed max voltage of %u V is out of spec.", volts); | |
189 | return SR_ERR_BUG; | |
190 | } | |
191 | ||
192 | if (amps > 120) { | |
193 | sr_err("Probed max current of %u A is out of spec.", amps); | |
194 | return SR_ERR_BUG; | |
195 | } | |
196 | ||
197 | if (watts > 5000) { | |
198 | sr_err("Probed max power of %u W is out of spec.", watts); | |
199 | return SR_ERR_BUG; | |
200 | } | |
201 | ||
202 | channel = g_malloc0(sizeof(struct channel_spec)); | |
203 | channel->name = "1"; | |
204 | channel->voltage[0] = channel->current[0] = channel->power[0] = 0.0; | |
205 | channel->voltage[1] = volts; | |
206 | channel->current[1] = amps; | |
207 | channel->power[1] = watts; | |
208 | channel->voltage[2] = channel->current[2] = 0.01; | |
209 | channel->voltage[3] = channel->voltage[4] = 3; | |
210 | channel->current[3] = channel->current[4] = 4; | |
211 | *channels = channel; | |
212 | *num_channels = 1; | |
213 | ||
214 | *channel_groups = g_malloc(sizeof(struct channel_group_spec)); | |
215 | **channel_groups = chroma_62000_cg[0]; | |
216 | *num_channel_groups = 1; | |
217 | ||
218 | return SR_OK; | |
219 | } | |
220 | ||
221 | /* Rigol DP800 series */ | |
222 | static const uint32_t rigol_dp800_devopts[] = { | |
223 | SR_CONF_CONTINUOUS, | |
224 | SR_CONF_OVER_TEMPERATURE_PROTECTION | SR_CONF_GET | SR_CONF_SET, | |
225 | }; | |
226 | ||
227 | static const uint32_t rigol_dp800_devopts_cg[] = { | |
228 | SR_CONF_REGULATION | SR_CONF_GET, | |
229 | SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
230 | SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET, | |
231 | SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, | |
232 | SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
233 | SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE | SR_CONF_GET, | |
234 | SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, | |
235 | SR_CONF_VOLTAGE | SR_CONF_GET, | |
236 | SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
237 | SR_CONF_CURRENT | SR_CONF_GET, | |
238 | SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
239 | SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
240 | }; | |
241 | ||
242 | static const struct channel_spec rigol_dp821a_ch[] = { | |
243 | { "1", { 0, 60, 0.001, 3, 3 }, { 0, 1, 0.0001, 4, 4 }, { 0, 60, 0, 3, 4 }, FREQ_DC_ONLY }, | |
244 | { "2", { 0, 8, 0.001, 3, 3 }, { 0, 10, 0.001, 3, 3 }, { 0, 80, 0, 3, 3 }, FREQ_DC_ONLY }, | |
245 | }; | |
246 | ||
247 | static const struct channel_spec rigol_dp831_ch[] = { | |
248 | { "1", { 0, 8, 0.001, 3, 4 }, { 0, 5, 0.0003, 3, 4 }, { 0, 40, 0, 3, 4 }, FREQ_DC_ONLY }, | |
249 | { "2", { 0, 30, 0.001, 3, 4 }, { 0, 2, 0.0001, 3, 4 }, { 0, 60, 0, 3, 4 }, FREQ_DC_ONLY }, | |
250 | { "3", { 0, -30, 0.001, 3, 4 }, { 0, 2, 0.0001, 3, 4 }, { 0, 60, 0, 3, 4 }, FREQ_DC_ONLY }, | |
251 | }; | |
252 | ||
253 | static const struct channel_spec rigol_dp832_ch[] = { | |
254 | { "1", { 0, 30, 0.001, 3, 4 }, { 0, 3, 0.001, 3, 4 }, { 0, 90, 0, 3, 4 }, FREQ_DC_ONLY }, | |
255 | { "2", { 0, 30, 0.001, 3, 4 }, { 0, 3, 0.001, 3, 4 }, { 0, 90, 0, 3, 4 }, FREQ_DC_ONLY }, | |
256 | { "3", { 0, 5, 0.001, 3, 4 }, { 0, 3, 0.001, 3, 4 }, { 0, 90, 0, 3, 4 }, FREQ_DC_ONLY }, | |
257 | }; | |
258 | ||
259 | static const struct channel_group_spec rigol_dp820_cg[] = { | |
260 | { "1", CH_IDX(0), PPS_OVP | PPS_OCP }, | |
261 | { "2", CH_IDX(1), PPS_OVP | PPS_OCP }, | |
262 | }; | |
263 | ||
264 | static const struct channel_group_spec rigol_dp830_cg[] = { | |
265 | { "1", CH_IDX(0), PPS_OVP | PPS_OCP }, | |
266 | { "2", CH_IDX(1), PPS_OVP | PPS_OCP }, | |
267 | { "3", CH_IDX(2), PPS_OVP | PPS_OCP }, | |
268 | }; | |
269 | ||
270 | static const struct scpi_command rigol_dp800_cmd[] = { | |
271 | { SCPI_CMD_REMOTE, "SYST:REMOTE" }, | |
272 | { SCPI_CMD_LOCAL, "SYST:LOCAL" }, | |
273 | { SCPI_CMD_BEEPER, "SYST:BEEP:STAT?" }, | |
274 | { SCPI_CMD_BEEPER_ENABLE, "SYST:BEEP:STAT ON" }, | |
275 | { SCPI_CMD_BEEPER_DISABLE, "SYST:BEEP:STAT OFF" }, | |
276 | { SCPI_CMD_SELECT_CHANNEL, ":INST:NSEL %s" }, | |
277 | { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" }, | |
278 | { SCPI_CMD_GET_MEAS_CURRENT, ":MEAS:CURR?" }, | |
279 | { SCPI_CMD_GET_MEAS_POWER, ":MEAS:POWE?" }, | |
280 | { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" }, | |
281 | { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.6f" }, | |
282 | { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" }, | |
283 | { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" }, | |
284 | { SCPI_CMD_GET_OUTPUT_ENABLED, ":OUTP?" }, | |
285 | { SCPI_CMD_SET_OUTPUT_ENABLE, ":OUTP ON" }, | |
286 | { SCPI_CMD_SET_OUTPUT_DISABLE, ":OUTP OFF" }, | |
287 | { SCPI_CMD_GET_OUTPUT_REGULATION, ":OUTP:MODE?" }, | |
288 | { SCPI_CMD_GET_OVER_TEMPERATURE_PROTECTION, ":SYST:OTP?" }, | |
289 | { SCPI_CMD_SET_OVER_TEMPERATURE_PROTECTION_ENABLE, ":SYST:OTP ON" }, | |
290 | { SCPI_CMD_SET_OVER_TEMPERATURE_PROTECTION_DISABLE, ":SYST:OTP OFF" }, | |
291 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ENABLED, ":OUTP:OVP?" }, | |
292 | { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_ENABLE, ":OUTP:OVP ON" }, | |
293 | { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_DISABLE, ":OUTP:OVP OFF" }, | |
294 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, ":OUTP:OVP:QUES?" }, | |
295 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":OUTP:OVP:VAL?" }, | |
296 | { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":OUTP:OVP:VAL %.6f" }, | |
297 | { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ENABLED, ":OUTP:OCP?" }, | |
298 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, ":OUTP:OCP:STAT ON" }, | |
299 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, ":OUTP:OCP:STAT OFF" }, | |
300 | { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ACTIVE, ":OUTP:OCP:QUES?" }, | |
301 | { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":OUTP:OCP:VAL?" }, | |
302 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":OUTP:OCP:VAL %.6f" }, | |
303 | ALL_ZERO | |
304 | }; | |
305 | ||
306 | /* HP 663xx series */ | |
307 | static const uint32_t hp_6630a_devopts[] = { | |
308 | SR_CONF_CONTINUOUS, | |
309 | }; | |
310 | ||
311 | static const uint32_t hp_6630a_devopts_cg[] = { | |
312 | SR_CONF_ENABLED | SR_CONF_SET, | |
313 | SR_CONF_VOLTAGE | SR_CONF_GET, | |
314 | SR_CONF_CURRENT | SR_CONF_GET, | |
315 | SR_CONF_VOLTAGE_TARGET | SR_CONF_SET | SR_CONF_LIST, | |
316 | SR_CONF_CURRENT_LIMIT | SR_CONF_SET | SR_CONF_LIST, | |
317 | SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_SET, | |
318 | SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_SET, | |
319 | }; | |
320 | ||
321 | static const uint32_t hp_6632b_devopts[] = { | |
322 | SR_CONF_CONTINUOUS, | |
323 | }; | |
324 | ||
325 | static const uint32_t hp_6632b_devopts_cg[] = { | |
326 | SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
327 | SR_CONF_VOLTAGE | SR_CONF_GET, | |
328 | SR_CONF_CURRENT | SR_CONF_GET, | |
329 | SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
330 | SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
331 | }; | |
332 | ||
333 | static const struct channel_spec hp_6633a_ch[] = { | |
334 | { "1", { 0, 51.188, 0.0125, 3, 4 }, { 0, 2.0475, 0.0005, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY }, | |
335 | }; | |
336 | ||
337 | static const struct channel_spec hp_6632b_ch[] = { | |
338 | { "1", { 0, 20.475, 0.005, 3, 4 }, { 0, 5.1188, 0.00132, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY }, | |
339 | }; | |
340 | ||
341 | static const struct channel_group_spec hp_663xx_cg[] = { | |
342 | { "1", CH_IDX(0), 0 }, | |
343 | }; | |
344 | ||
345 | static const struct scpi_command hp_6630a_cmd[] = { | |
346 | { SCPI_CMD_SET_OUTPUT_ENABLE, "OUT 1" }, | |
347 | { SCPI_CMD_SET_OUTPUT_DISABLE, "OUT 0" }, | |
348 | { SCPI_CMD_GET_MEAS_VOLTAGE, "VOUT?" }, | |
349 | { SCPI_CMD_GET_MEAS_CURRENT, "IOUT?" }, | |
350 | { SCPI_CMD_SET_VOLTAGE_TARGET, "VSET %.4f" }, | |
351 | { SCPI_CMD_SET_CURRENT_LIMIT, "ISET %.4f" }, | |
352 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, "OCP 1" }, | |
353 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, "OCP 0" }, | |
354 | { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "OVSET %.4f" }, | |
355 | ALL_ZERO | |
356 | }; | |
357 | ||
358 | static const struct scpi_command hp_6632b_cmd[] = { | |
359 | { SCPI_CMD_GET_OUTPUT_ENABLED, "OUTP:STAT?" }, | |
360 | { SCPI_CMD_SET_OUTPUT_ENABLE, "OUTP:STAT ON" }, | |
361 | { SCPI_CMD_SET_OUTPUT_DISABLE, "OUTP:STAT OFF" }, | |
362 | { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" }, | |
363 | { SCPI_CMD_GET_MEAS_CURRENT, ":MEAS:CURR?" }, | |
364 | { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" }, | |
365 | { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.6f" }, | |
366 | { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" }, | |
367 | { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" }, | |
368 | ALL_ZERO | |
369 | }; | |
370 | ||
371 | /* Philips/Fluke PM2800 series */ | |
372 | static const uint32_t philips_pm2800_devopts[] = { | |
373 | SR_CONF_CONTINUOUS, | |
374 | }; | |
375 | ||
376 | static const uint32_t philips_pm2800_devopts_cg[] = { | |
377 | SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
378 | SR_CONF_VOLTAGE | SR_CONF_GET, | |
379 | SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
380 | SR_CONF_CURRENT | SR_CONF_GET, | |
381 | SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
382 | SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET, | |
383 | SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, | |
384 | SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
385 | SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE | SR_CONF_GET, | |
386 | SR_CONF_REGULATION | SR_CONF_GET, | |
387 | }; | |
388 | ||
389 | enum philips_pm2800_modules { | |
390 | PM2800_MOD_30V_10A = 1, | |
391 | PM2800_MOD_60V_5A, | |
392 | PM2800_MOD_60V_10A, | |
393 | PM2800_MOD_8V_15A, | |
394 | PM2800_MOD_60V_2A, | |
395 | PM2800_MOD_120V_1A, | |
396 | }; | |
397 | ||
398 | static const struct philips_pm2800_module_spec { | |
399 | /* Min, max, programming resolution. */ | |
400 | double voltage[5]; | |
401 | double current[5]; | |
402 | double power[5]; | |
403 | } philips_pm2800_module_specs[] = { | |
404 | /* Autoranging modules. */ | |
405 | [PM2800_MOD_30V_10A] = { { 0, 30, 0.0075, 2, 4 }, { 0, 10, 0.0025, 2, 4 }, { 0, 60 } }, | |
406 | [PM2800_MOD_60V_5A] = { { 0, 60, 0.015, 2, 3 }, { 0, 5, 0.00125, 2, 5 }, { 0, 60 } }, | |
407 | [PM2800_MOD_60V_10A] = { { 0, 60, 0.015, 2, 3 }, { 0, 10, 0.0025, 2, 5 }, { 0, 120 } }, | |
408 | /* Linear modules. */ | |
409 | [PM2800_MOD_8V_15A] = { { 0, 8, 0.002, 3, 3 }, { -15, 15, 0.00375, 3, 5 }, { 0, 120 } }, | |
410 | [PM2800_MOD_60V_2A] = { { 0, 60, 0.015, 2, 3 }, { -2, 2, 0.0005, 3, 4 }, { 0, 120 } }, | |
411 | [PM2800_MOD_120V_1A] = { { 0, 120, 0.030, 2, 2 }, { -1, 1, 0.00025, 3, 5 }, { 0, 120 } }, | |
412 | }; | |
413 | ||
414 | static const struct philips_pm2800_model { | |
415 | unsigned int chassis; | |
416 | unsigned int num_modules; | |
417 | unsigned int set; | |
418 | unsigned int modules[3]; | |
419 | } philips_pm2800_matrix[] = { | |
420 | /* Autoranging chassis. */ | |
421 | { 1, 1, 0, { PM2800_MOD_30V_10A, 0, 0 } }, | |
422 | { 1, 1, 1, { PM2800_MOD_60V_5A, 0, 0 } }, | |
423 | { 1, 2, 0, { PM2800_MOD_30V_10A, PM2800_MOD_30V_10A, 0 } }, | |
424 | { 1, 2, 1, { PM2800_MOD_60V_5A, PM2800_MOD_60V_5A, 0 } }, | |
425 | { 1, 2, 2, { PM2800_MOD_30V_10A, PM2800_MOD_60V_5A, 0 } }, | |
426 | { 1, 2, 3, { PM2800_MOD_30V_10A, PM2800_MOD_60V_10A, 0 } }, | |
427 | { 1, 2, 4, { PM2800_MOD_60V_5A, PM2800_MOD_60V_10A, 0 } }, | |
428 | { 1, 3, 0, { PM2800_MOD_30V_10A, PM2800_MOD_30V_10A, PM2800_MOD_30V_10A } }, | |
429 | { 1, 3, 1, { PM2800_MOD_60V_5A, PM2800_MOD_60V_5A, PM2800_MOD_60V_5A } }, | |
430 | { 1, 3, 2, { PM2800_MOD_30V_10A, PM2800_MOD_30V_10A, PM2800_MOD_60V_5A } }, | |
431 | { 1, 3, 3, { PM2800_MOD_30V_10A, PM2800_MOD_60V_5A, PM2800_MOD_60V_5A } }, | |
432 | /* Linear chassis. */ | |
433 | { 3, 1, 0, { PM2800_MOD_60V_2A, 0, 0 } }, | |
434 | { 3, 1, 1, { PM2800_MOD_120V_1A, 0, 0 } }, | |
435 | { 3, 1, 2, { PM2800_MOD_8V_15A, 0, 0 } }, | |
436 | { 3, 2, 0, { PM2800_MOD_60V_2A, 0, 0 } }, | |
437 | { 3, 2, 1, { PM2800_MOD_120V_1A, 0, 0 } }, | |
438 | { 3, 2, 2, { PM2800_MOD_60V_2A, PM2800_MOD_120V_1A, 0 } }, | |
439 | { 3, 2, 3, { PM2800_MOD_8V_15A, PM2800_MOD_8V_15A, 0 } }, | |
440 | }; | |
441 | ||
442 | static const char *philips_pm2800_names[] = { "1", "2", "3" }; | |
443 | ||
444 | static int philips_pm2800_probe_channels(struct sr_dev_inst *sdi, | |
445 | struct sr_scpi_hw_info *hw_info, | |
446 | struct channel_spec **channels, unsigned int *num_channels, | |
447 | struct channel_group_spec **channel_groups, unsigned int *num_channel_groups) | |
448 | { | |
449 | const struct philips_pm2800_model *model; | |
450 | const struct philips_pm2800_module_spec *spec; | |
451 | unsigned int chassis, num_modules, set, module, m, i; | |
452 | ||
453 | (void)sdi; | |
454 | ||
455 | /* | |
456 | * The model number as reported by *IDN? looks like e.g. PM2813/11, | |
457 | * Where "PM28" is fixed, followed by the chassis code (1 = autoranging, | |
458 | * 3 = linear series) and the number of modules: 1-3 for autoranging, | |
459 | * 1-2 for linear. | |
460 | * After the slash, the first digit denotes the module set. The | |
461 | * digit after that denotes front (5) or rear (1) binding posts. | |
462 | */ | |
463 | chassis = hw_info->model[4] - 0x30; | |
464 | num_modules = hw_info->model[5] - 0x30; | |
465 | set = hw_info->model[7] - 0x30; | |
466 | for (m = 0; m < ARRAY_SIZE(philips_pm2800_matrix); m++) { | |
467 | model = &philips_pm2800_matrix[m]; | |
468 | if (model->chassis == chassis && model->num_modules == num_modules | |
469 | && model->set == set) | |
470 | break; | |
471 | } | |
472 | if (m == ARRAY_SIZE(philips_pm2800_matrix)) { | |
473 | sr_dbg("Model %s not found in matrix.", hw_info->model); | |
474 | return SR_ERR; | |
475 | } | |
476 | ||
477 | sr_dbg("Found %d output channel%s:", num_modules, num_modules > 1 ? "s" : ""); | |
478 | *channels = g_malloc0(sizeof(struct channel_spec) * num_modules); | |
479 | *channel_groups = g_malloc0(sizeof(struct channel_group_spec) * num_modules); | |
480 | for (i = 0; i < num_modules; i++) { | |
481 | module = model->modules[i]; | |
482 | spec = &philips_pm2800_module_specs[module]; | |
483 | sr_dbg("output %d: %.0f - %.0fV, %.0f - %.0fA, %.0f - %.0fW", i + 1, | |
484 | spec->voltage[0], spec->voltage[1], | |
485 | spec->current[0], spec->current[1], | |
486 | spec->power[0], spec->power[1]); | |
487 | (*channels)[i].name = (char *)philips_pm2800_names[i]; | |
488 | memcpy(&((*channels)[i].voltage), spec, sizeof(double) * 15); | |
489 | (*channel_groups)[i].name = (char *)philips_pm2800_names[i]; | |
490 | (*channel_groups)[i].channel_index_mask = 1 << i; | |
491 | (*channel_groups)[i].features = PPS_OTP | PPS_OVP | PPS_OCP; | |
492 | } | |
493 | *num_channels = *num_channel_groups = num_modules; | |
494 | ||
495 | return SR_OK; | |
496 | } | |
497 | ||
498 | static const struct scpi_command philips_pm2800_cmd[] = { | |
499 | { SCPI_CMD_SELECT_CHANNEL, ":INST:NSEL %s" }, | |
500 | { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" }, | |
501 | { SCPI_CMD_GET_MEAS_CURRENT, ":MEAS:CURR?" }, | |
502 | { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" }, | |
503 | { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.6f" }, | |
504 | { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" }, | |
505 | { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" }, | |
506 | { SCPI_CMD_GET_OUTPUT_ENABLED, ":OUTP?" }, | |
507 | { SCPI_CMD_SET_OUTPUT_ENABLE, ":OUTP ON" }, | |
508 | { SCPI_CMD_SET_OUTPUT_DISABLE, ":OUTP OFF" }, | |
509 | { SCPI_CMD_GET_OUTPUT_REGULATION, ":SOUR:FUNC:MODE?" }, | |
510 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, ":SOUR:VOLT:PROT:TRIP?" }, | |
511 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT:LEV?" }, | |
512 | { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT:LEV %.6f" }, | |
513 | { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ENABLED, ":SOUR:CURR:PROT:STAT?" }, | |
514 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, ":SOUR:CURR:PROT:STAT ON" }, | |
515 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, ":SOUR:CURR:PROT:STAT OFF" }, | |
516 | { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ACTIVE, ":SOUR:CURR:PROT:TRIP?" }, | |
517 | ALL_ZERO | |
518 | }; | |
519 | ||
520 | static const uint32_t rs_hmc8043_devopts[] = { | |
521 | SR_CONF_CONTINUOUS, | |
522 | }; | |
523 | ||
524 | static const uint32_t rs_hmc8043_devopts_cg[] = { | |
525 | SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
526 | SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET, | |
527 | SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, | |
528 | SR_CONF_VOLTAGE | SR_CONF_GET, | |
529 | SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
530 | SR_CONF_CURRENT | SR_CONF_GET, | |
531 | SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
532 | SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
533 | }; | |
534 | ||
535 | static const struct channel_spec rs_hmc8043_ch[] = { | |
536 | { "1", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 3, 0.001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY }, | |
537 | { "2", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 3, 0.001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY }, | |
538 | { "3", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 3, 0.001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY }, | |
539 | }; | |
540 | ||
541 | static const struct channel_group_spec rs_hmc8043_cg[] = { | |
542 | { "1", CH_IDX(0), PPS_OVP }, | |
543 | { "2", CH_IDX(1), PPS_OVP }, | |
544 | { "3", CH_IDX(2), PPS_OVP }, | |
545 | }; | |
546 | ||
547 | static const struct scpi_command rs_hmc8043_cmd[] = { | |
548 | { SCPI_CMD_SELECT_CHANNEL, "INST:NSEL %s" }, | |
549 | { SCPI_CMD_GET_MEAS_VOLTAGE, "MEAS:VOLT?" }, | |
550 | { SCPI_CMD_GET_MEAS_CURRENT, "MEAS:CURR?" }, | |
551 | { SCPI_CMD_GET_VOLTAGE_TARGET, "VOLT?" }, | |
552 | { SCPI_CMD_SET_VOLTAGE_TARGET, "VOLT %.6f" }, | |
553 | { SCPI_CMD_GET_CURRENT_LIMIT, "CURR?" }, | |
554 | { SCPI_CMD_SET_CURRENT_LIMIT, "CURR %.6f" }, | |
555 | { SCPI_CMD_GET_OUTPUT_ENABLED, "OUTP?" }, | |
556 | { SCPI_CMD_SET_OUTPUT_ENABLE, "OUTP ON" }, | |
557 | { SCPI_CMD_SET_OUTPUT_DISABLE, "OUTP OFF" }, | |
558 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, "VOLT:PROT:TRIP?" }, | |
559 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:PROT:LEV?" }, | |
560 | { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:PROT:LEV %.6f" }, | |
561 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ENABLED, "VOLT:PROT:STAT?" }, | |
562 | { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_ENABLE, "VOLT:PROT:STAT ON" }, | |
563 | { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_DISABLE, "VOLT:PROT:STAT OFF" }, | |
564 | ALL_ZERO | |
565 | }; | |
566 | ||
567 | SR_PRIV const struct scpi_pps pps_profiles[] = { | |
568 | /* Agilent N5763A */ | |
569 | { "Agilent", "N5763A", 0, | |
570 | ARRAY_AND_SIZE(agilent_n5700a_devopts), | |
571 | ARRAY_AND_SIZE(agilent_n5700a_devopts_cg), | |
572 | ARRAY_AND_SIZE(agilent_n5763a_ch), | |
573 | ARRAY_AND_SIZE(agilent_n5700a_cg), | |
574 | agilent_n5700a_cmd, | |
575 | .probe_channels = NULL, | |
576 | }, | |
577 | ||
578 | /* Agilent N5767A */ | |
579 | { "Agilent", "N5767A", 0, | |
580 | ARRAY_AND_SIZE(agilent_n5700a_devopts), | |
581 | ARRAY_AND_SIZE(agilent_n5700a_devopts_cg), | |
582 | ARRAY_AND_SIZE(agilent_n5767a_ch), | |
583 | ARRAY_AND_SIZE(agilent_n5700a_cg), | |
584 | agilent_n5700a_cmd, | |
585 | .probe_channels = NULL, | |
586 | }, | |
587 | ||
588 | /* Chroma 61604 */ | |
589 | { "Chroma", "61604", 0, | |
590 | ARRAY_AND_SIZE(chroma_61604_devopts), | |
591 | ARRAY_AND_SIZE(chroma_61604_devopts_cg), | |
592 | ARRAY_AND_SIZE(chroma_61604_ch), | |
593 | ARRAY_AND_SIZE(chroma_61604_cg), | |
594 | chroma_61604_cmd, | |
595 | .probe_channels = NULL, | |
596 | }, | |
597 | ||
598 | /* Chroma 62000 series */ | |
599 | { "Chroma", "620[0-9]{2}P-[0-9]{2,3}-[0-9]{1,3}", 0, | |
600 | ARRAY_AND_SIZE(chroma_62000_devopts), | |
601 | ARRAY_AND_SIZE(chroma_62000_devopts_cg), | |
602 | NULL, 0, | |
603 | NULL, 0, | |
604 | chroma_62000_cmd, | |
605 | .probe_channels = chroma_62000p_probe_channels, | |
606 | }, | |
607 | ||
608 | /* HP 6633A */ | |
609 | { "HP", "6633A", 0, | |
610 | ARRAY_AND_SIZE(hp_6630a_devopts), | |
611 | ARRAY_AND_SIZE(hp_6630a_devopts_cg), | |
612 | ARRAY_AND_SIZE(hp_6633a_ch), | |
613 | ARRAY_AND_SIZE(hp_663xx_cg), | |
614 | hp_6630a_cmd, | |
615 | .probe_channels = NULL, | |
616 | }, | |
617 | ||
618 | /* HP 6632B */ | |
619 | { "HP", "6632B", 0, | |
620 | ARRAY_AND_SIZE(hp_6632b_devopts), | |
621 | ARRAY_AND_SIZE(hp_6632b_devopts_cg), | |
622 | ARRAY_AND_SIZE(hp_6632b_ch), | |
623 | ARRAY_AND_SIZE(hp_663xx_cg), | |
624 | hp_6632b_cmd, | |
625 | .probe_channels = NULL, | |
626 | }, | |
627 | ||
628 | /* Rigol DP800 series */ | |
629 | { "Rigol", "^DP821A$", PPS_OTP, | |
630 | ARRAY_AND_SIZE(rigol_dp800_devopts), | |
631 | ARRAY_AND_SIZE(rigol_dp800_devopts_cg), | |
632 | ARRAY_AND_SIZE(rigol_dp821a_ch), | |
633 | ARRAY_AND_SIZE(rigol_dp820_cg), | |
634 | rigol_dp800_cmd, | |
635 | .probe_channels = NULL, | |
636 | }, | |
637 | { "Rigol", "^DP831A$", PPS_OTP, | |
638 | ARRAY_AND_SIZE(rigol_dp800_devopts), | |
639 | ARRAY_AND_SIZE(rigol_dp800_devopts_cg), | |
640 | ARRAY_AND_SIZE(rigol_dp831_ch), | |
641 | ARRAY_AND_SIZE(rigol_dp830_cg), | |
642 | rigol_dp800_cmd, | |
643 | .probe_channels = NULL, | |
644 | }, | |
645 | { "Rigol", "^(DP832|DP832A)$", PPS_OTP, | |
646 | ARRAY_AND_SIZE(rigol_dp800_devopts), | |
647 | ARRAY_AND_SIZE(rigol_dp800_devopts_cg), | |
648 | ARRAY_AND_SIZE(rigol_dp832_ch), | |
649 | ARRAY_AND_SIZE(rigol_dp830_cg), | |
650 | rigol_dp800_cmd, | |
651 | .probe_channels = NULL, | |
652 | }, | |
653 | ||
654 | /* Philips/Fluke PM2800 series */ | |
655 | { "Philips", "^PM28[13][123]/[01234]{1,2}$", 0, | |
656 | ARRAY_AND_SIZE(philips_pm2800_devopts), | |
657 | ARRAY_AND_SIZE(philips_pm2800_devopts_cg), | |
658 | NULL, 0, | |
659 | NULL, 0, | |
660 | philips_pm2800_cmd, | |
661 | philips_pm2800_probe_channels, | |
662 | }, | |
663 | ||
664 | /* Rohde & Schwarz HMC8043 */ | |
665 | { "Rohde&Schwarz", "HMC8043", 0, | |
666 | ARRAY_AND_SIZE(rs_hmc8043_devopts), | |
667 | ARRAY_AND_SIZE(rs_hmc8043_devopts_cg), | |
668 | ARRAY_AND_SIZE(rs_hmc8043_ch), | |
669 | ARRAY_AND_SIZE(rs_hmc8043_cg), | |
670 | rs_hmc8043_cmd, | |
671 | .probe_channels = NULL, | |
672 | }, | |
673 | }; | |
674 | ||
675 | SR_PRIV unsigned int num_pps_profiles = ARRAY_SIZE(pps_profiles); |