]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * This file is part of the libserialport project. | |
3 | * | |
4 | * Copyright (C) 2013 Martin Ling <martin-libserialport@earth.li> | |
5 | * | |
6 | * This program is free software: you can redistribute it and/or modify | |
7 | * it under the terms of the GNU Lesser General Public License as | |
8 | * published by the Free Software Foundation, either version 3 of the | |
9 | * License, or (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU Lesser General Public License | |
17 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
18 | */ | |
19 | ||
20 | /** | |
21 | * @mainpage libserialport API | |
22 | * | |
23 | * Introduction | |
24 | * ============ | |
25 | * | |
26 | * libserialport is a minimal library written in C that is intended to take | |
27 | * care of the OS-specific details when writing software that uses serial ports. | |
28 | * | |
29 | * By writing your serial code to use libserialport, you enable it to work | |
30 | * transparently on any platform supported by the library. | |
31 | * | |
32 | * libserialport is an open source project released under the LGPL3+ license. | |
33 | * | |
34 | * The library is maintained by the [sigrok](http://sigrok.org/) project. See | |
35 | * the [libserialport homepage](http://sigrok.org/wiki/Libserialport) for the | |
36 | * latest information. | |
37 | * | |
38 | * Source code is maintained in git at | |
39 | * [git://sigrok.org/libserialport](http://sigrok.org/gitweb/?p=libserialport.git). | |
40 | * | |
41 | * Bugs are tracked at http://sigrok.org/bugzilla/. | |
42 | * | |
43 | * The library was conceived and designed by Martin Ling, is maintained by | |
44 | * Uwe Hermann, and has received contributions from several other developers. | |
45 | * See the git history for full credits. | |
46 | * | |
47 | * API information | |
48 | * =============== | |
49 | * | |
50 | * The API has been designed from scratch. It does not exactly resemble the | |
51 | * serial API of any particular operating system. Instead it aims to provide | |
52 | * a set of functions that can reliably be implemented across all operating | |
53 | * systems. These form a sufficient basis for higher level behaviour to | |
54 | * be implemented in a platform independent manner. | |
55 | * | |
56 | * If you are porting code written for a particular OS, you may find you need | |
57 | * to restructure things somewhat, or do without some specialised features. | |
58 | * For particular notes on porting existing code, see @ref Porting. | |
59 | * | |
60 | * The following subsections will help explain the principles of the API. | |
61 | * To jump directly into the detailed function documentation, see the | |
62 | * <a href="modules.html">categorised function lists</a>. | |
63 | * | |
64 | * Data structures | |
65 | * --------------- | |
66 | * | |
67 | * The library defines three data structures: | |
68 | * | |
69 | * - @ref sp_port, which represents a serial port. | |
70 | * See @ref Enumeration. | |
71 | * - @ref sp_port_config, which represents a port configuration. | |
72 | * See @ref Configuration. | |
73 | * - @ref sp_event_set, which represents a set of events. | |
74 | * See @ref Waiting. | |
75 | * | |
76 | * All these structures are allocated and freed by library functions. It is | |
77 | * the caller's responsibility to ensure that the correct calls are made to | |
78 | * free allocated structures after use. | |
79 | * | |
80 | * Return codes and error handling | |
81 | * ------------------------------- | |
82 | * | |
83 | * Most functions have return type @ref sp_return and can return only four | |
84 | * possible error values: | |
85 | * | |
86 | * - @ref SP_ERR_ARG means that a function was called with invalid | |
87 | * arguments. This implies a bug in the caller. The arguments passed would | |
88 | * be invalid regardless of the underlying OS or serial device involved. | |
89 | * | |
90 | * - @ref SP_ERR_FAIL means that the OS reported a failure. The error code or | |
91 | * message provided by the OS can be obtained by calling sp_last_error_code() | |
92 | * or sp_last_error_message(). | |
93 | * | |
94 | * - @ref SP_ERR_SUPP indicates that there is no support for the requested | |
95 | * operation in the current OS, driver or device. No error message is | |
96 | * available from the OS in this case. There is either no way to request | |
97 | * the operation in the first place, or libserialport does not know how to | |
98 | * do so in the current version. | |
99 | * | |
100 | * - @ref SP_ERR_MEM indicates that a memory allocation failed. | |
101 | * | |
102 | * All of these error values are negative. | |
103 | * | |
104 | * Calls that succeed return @ref SP_OK, which is equal to zero. Some functions | |
105 | * declared @ref sp_return can also return a positive value for a successful | |
106 | * numeric result, e.g. sp_blocking_read() or sp_blocking_write(). | |
107 | * | |
108 | * An error message is only available via sp_last_error_message() in the case | |
109 | * where SP_ERR_FAIL was returned by the previous function call. The error | |
110 | * message returned is that provided by the OS, using the current language | |
111 | * settings. It is an error to call sp_last_error_code() or | |
112 | * sp_last_error_message() except after a previous function call returned | |
113 | * SP_ERR_FAIL. The library does not define its own error codes or messages | |
114 | * to accompany other return codes. | |
115 | * | |
116 | * Thread safety | |
117 | * ------------- | |
118 | * | |
119 | * Certain combinations of calls can be made concurrently, as follows. | |
120 | * | |
121 | * - Calls using different ports may always be made concurrently, i.e. | |
122 | * it is safe for separate threads to handle their own ports. | |
123 | * | |
124 | * - Calls using the same port may be made concurrently when one call | |
125 | * is a read operation and one call is a write operation, i.e. it is safe | |
126 | * to use separate "reader" and "writer" threads for the same port. See | |
127 | * below for which operations meet these definitions. | |
128 | * | |
129 | * Read operations: | |
130 | * | |
131 | * - sp_blocking_read() | |
132 | * - sp_blocking_read_next() | |
133 | * - sp_nonblocking_read() | |
134 | * - sp_input_waiting() | |
135 | * - sp_flush() with @ref SP_BUF_INPUT only. | |
136 | * - sp_wait() with @ref SP_EVENT_RX_READY only. | |
137 | * | |
138 | * Write operations: | |
139 | * | |
140 | * - sp_blocking_write() | |
141 | * - sp_nonblocking_write() | |
142 | * - sp_output_waiting() | |
143 | * - sp_drain() | |
144 | * - sp_flush() with @ref SP_BUF_OUTPUT only. | |
145 | * - sp_wait() with @ref SP_EVENT_TX_READY only. | |
146 | * | |
147 | * If two calls, on the same port, do not fit into one of these categories | |
148 | * each, then they may not be made concurrently. | |
149 | * | |
150 | * Debugging | |
151 | * --------- | |
152 | * | |
153 | * The library can output extensive tracing and debugging information. The | |
154 | * simplest way to use this is to set the environment variable | |
155 | * LIBSERIALPORT_DEBUG to any value; messages will then be output to the | |
156 | * standard error stream. | |
157 | * | |
158 | * This behaviour is implemented by a default debug message handling | |
159 | * callback. An alternative callback can be set using sp_set_debug_handler(), | |
160 | * in order to e.g. redirect the output elsewhere or filter it. | |
161 | * | |
162 | * No guarantees are made about the content of the debug output; it is chosen | |
163 | * to suit the needs of the developers and may change between releases. | |
164 | * | |
165 | * @anchor Porting | |
166 | * Porting | |
167 | * ------- | |
168 | * | |
169 | * The following guidelines may help when porting existing OS-specific code | |
170 | * to use libserialport. | |
171 | * | |
172 | * ### Porting from Unix-like systems ### | |
173 | * | |
174 | * There are two main differences to note when porting code written for Unix. | |
175 | * | |
176 | * The first is that Unix traditionally provides a wide range of functionality | |
177 | * for dealing with serial devices at the OS level; this is exposed through the | |
178 | * termios API and dates to the days when serial terminals were common. If your | |
179 | * code relies on many of these facilities you will need to adapt it, because | |
180 | * libserialport provides only a raw 8-bit channel with no special handling. | |
181 | * | |
182 | * The second relates to blocking versus non-blocking I/O behaviour. In | |
183 | * Unix-like systems this is normally specified by setting the O_NONBLOCK | |
184 | * flag on the file descriptor, affecting the semantics of subsequent read() | |
185 | * and write() calls. | |
186 | * | |
187 | * In libserialport, blocking and nonblocking operations are both available at | |
188 | * any time. If your existing code Ń•ets O_NONBLOCK, you should use | |
189 | * sp_nonblocking_read() and sp_nonblocking_write() to get the same behaviour | |
190 | * as your existing read() and write() calls. If it does not, you should use | |
191 | * sp_blocking_read() and sp_blocking_write() instead. You may also find | |
192 | * sp_blocking_read_next() useful, which reproduces the semantics of a blocking | |
193 | * read() with VTIME = 0 and VMIN = 1 set in termios. | |
194 | * | |
195 | * Finally, you should take care if your program uses custom signal handlers. | |
196 | * The blocking calls provided by libserialport will restart system calls that | |
197 | * return with EINTR, so you will need to make your own arrangements if you | |
198 | * need to interrupt blocking operations when your signal handlers are called. | |
199 | * This is not an issue if you only use the default handlers. | |
200 | * | |
201 | * ### Porting from Windows ### | |
202 | * | |
203 | * The main consideration when porting from Windows is that there is no | |
204 | * direct equivalent for overlapped I/O operations. | |
205 | * | |
206 | * If your program does not use overlapped I/O, you can simply use | |
207 | * sp_blocking_read() and sp_blocking_write() as direct equivalents for | |
208 | * ReadFile() and WriteFile(). You may also find sp_blocking_read_next() | |
209 | * useful, which reproduces the special semantics of ReadFile() with | |
210 | * ReadIntervalTimeout and ReadTotalTimeoutMultiplier set to MAXDWORD | |
211 | * and 0 < ReadTotalTimeoutConstant < MAXDWORD. | |
212 | * | |
213 | * If your program makes use of overlapped I/O to continue work while a serial | |
214 | * operation is in progress, then you can achieve the same results using | |
215 | * sp_nonblocking_read() and sp_nonblocking_write(). | |
216 | * | |
217 | * Generally, overlapped I/O is combined with either waiting for completion | |
218 | * once there is no more background work to do (using WaitForSingleObject() or | |
219 | * WaitForMultipleObjects()), or periodically checking for completion with | |
220 | * GetOverlappedResult(). If the aim is to start a new operation for further | |
221 | * data once the previous one has completed, you can instead simply call the | |
222 | * nonblocking functions again with the next data. If you need to wait for | |
223 | * completion, use sp_wait() to determine when the port is ready to send or | |
224 | * receive further data. | |
225 | */ | |
226 | ||
227 | #ifndef LIBSERIALPORT_LIBSERIALPORT_H | |
228 | #define LIBSERIALPORT_LIBSERIALPORT_H | |
229 | ||
230 | #ifdef __cplusplus | |
231 | extern "C" { | |
232 | #endif | |
233 | ||
234 | #include <stddef.h> | |
235 | ||
236 | /** Return values. */ | |
237 | enum sp_return { | |
238 | /** Operation completed successfully. */ | |
239 | SP_OK = 0, | |
240 | /** Invalid arguments were passed to the function. */ | |
241 | SP_ERR_ARG = -1, | |
242 | /** A system error occurred while executing the operation. */ | |
243 | SP_ERR_FAIL = -2, | |
244 | /** A memory allocation failed while executing the operation. */ | |
245 | SP_ERR_MEM = -3, | |
246 | /** The requested operation is not supported by this system or device. */ | |
247 | SP_ERR_SUPP = -4 | |
248 | }; | |
249 | ||
250 | /** Port access modes. */ | |
251 | enum sp_mode { | |
252 | /** Open port for read access. */ | |
253 | SP_MODE_READ = 1, | |
254 | /** Open port for write access. */ | |
255 | SP_MODE_WRITE = 2, | |
256 | /** Open port for read and write access. @since 0.1.1 */ | |
257 | SP_MODE_READ_WRITE = 3 | |
258 | }; | |
259 | ||
260 | /** Port events. */ | |
261 | enum sp_event { | |
262 | /** Data received and ready to read. */ | |
263 | SP_EVENT_RX_READY = 1, | |
264 | /** Ready to transmit new data. */ | |
265 | SP_EVENT_TX_READY = 2, | |
266 | /** Error occurred. */ | |
267 | SP_EVENT_ERROR = 4 | |
268 | }; | |
269 | ||
270 | /** Buffer selection. */ | |
271 | enum sp_buffer { | |
272 | /** Input buffer. */ | |
273 | SP_BUF_INPUT = 1, | |
274 | /** Output buffer. */ | |
275 | SP_BUF_OUTPUT = 2, | |
276 | /** Both buffers. */ | |
277 | SP_BUF_BOTH = 3 | |
278 | }; | |
279 | ||
280 | /** Parity settings. */ | |
281 | enum sp_parity { | |
282 | /** Special value to indicate setting should be left alone. */ | |
283 | SP_PARITY_INVALID = -1, | |
284 | /** No parity. */ | |
285 | SP_PARITY_NONE = 0, | |
286 | /** Odd parity. */ | |
287 | SP_PARITY_ODD = 1, | |
288 | /** Even parity. */ | |
289 | SP_PARITY_EVEN = 2, | |
290 | /** Mark parity. */ | |
291 | SP_PARITY_MARK = 3, | |
292 | /** Space parity. */ | |
293 | SP_PARITY_SPACE = 4 | |
294 | }; | |
295 | ||
296 | /** RTS pin behaviour. */ | |
297 | enum sp_rts { | |
298 | /** Special value to indicate setting should be left alone. */ | |
299 | SP_RTS_INVALID = -1, | |
300 | /** RTS off. */ | |
301 | SP_RTS_OFF = 0, | |
302 | /** RTS on. */ | |
303 | SP_RTS_ON = 1, | |
304 | /** RTS used for flow control. */ | |
305 | SP_RTS_FLOW_CONTROL = 2 | |
306 | }; | |
307 | ||
308 | /** CTS pin behaviour. */ | |
309 | enum sp_cts { | |
310 | /** Special value to indicate setting should be left alone. */ | |
311 | SP_CTS_INVALID = -1, | |
312 | /** CTS ignored. */ | |
313 | SP_CTS_IGNORE = 0, | |
314 | /** CTS used for flow control. */ | |
315 | SP_CTS_FLOW_CONTROL = 1 | |
316 | }; | |
317 | ||
318 | /** DTR pin behaviour. */ | |
319 | enum sp_dtr { | |
320 | /** Special value to indicate setting should be left alone. */ | |
321 | SP_DTR_INVALID = -1, | |
322 | /** DTR off. */ | |
323 | SP_DTR_OFF = 0, | |
324 | /** DTR on. */ | |
325 | SP_DTR_ON = 1, | |
326 | /** DTR used for flow control. */ | |
327 | SP_DTR_FLOW_CONTROL = 2 | |
328 | }; | |
329 | ||
330 | /** DSR pin behaviour. */ | |
331 | enum sp_dsr { | |
332 | /** Special value to indicate setting should be left alone. */ | |
333 | SP_DSR_INVALID = -1, | |
334 | /** DSR ignored. */ | |
335 | SP_DSR_IGNORE = 0, | |
336 | /** DSR used for flow control. */ | |
337 | SP_DSR_FLOW_CONTROL = 1 | |
338 | }; | |
339 | ||
340 | /** XON/XOFF flow control behaviour. */ | |
341 | enum sp_xonxoff { | |
342 | /** Special value to indicate setting should be left alone. */ | |
343 | SP_XONXOFF_INVALID = -1, | |
344 | /** XON/XOFF disabled. */ | |
345 | SP_XONXOFF_DISABLED = 0, | |
346 | /** XON/XOFF enabled for input only. */ | |
347 | SP_XONXOFF_IN = 1, | |
348 | /** XON/XOFF enabled for output only. */ | |
349 | SP_XONXOFF_OUT = 2, | |
350 | /** XON/XOFF enabled for input and output. */ | |
351 | SP_XONXOFF_INOUT = 3 | |
352 | }; | |
353 | ||
354 | /** Standard flow control combinations. */ | |
355 | enum sp_flowcontrol { | |
356 | /** No flow control. */ | |
357 | SP_FLOWCONTROL_NONE = 0, | |
358 | /** Software flow control using XON/XOFF characters. */ | |
359 | SP_FLOWCONTROL_XONXOFF = 1, | |
360 | /** Hardware flow control using RTS/CTS signals. */ | |
361 | SP_FLOWCONTROL_RTSCTS = 2, | |
362 | /** Hardware flow control using DTR/DSR signals. */ | |
363 | SP_FLOWCONTROL_DTRDSR = 3 | |
364 | }; | |
365 | ||
366 | /** Input signals. */ | |
367 | enum sp_signal { | |
368 | /** Clear to send. */ | |
369 | SP_SIG_CTS = 1, | |
370 | /** Data set ready. */ | |
371 | SP_SIG_DSR = 2, | |
372 | /** Data carrier detect. */ | |
373 | SP_SIG_DCD = 4, | |
374 | /** Ring indicator. */ | |
375 | SP_SIG_RI = 8 | |
376 | }; | |
377 | ||
378 | /** | |
379 | * Transport types. | |
380 | * | |
381 | * @since 0.1.1 | |
382 | */ | |
383 | enum sp_transport { | |
384 | /** Native platform serial port. @since 0.1.1 */ | |
385 | SP_TRANSPORT_NATIVE, | |
386 | /** USB serial port adapter. @since 0.1.1 */ | |
387 | SP_TRANSPORT_USB, | |
388 | /** Bluetooth serial port adapter. @since 0.1.1 */ | |
389 | SP_TRANSPORT_BLUETOOTH | |
390 | }; | |
391 | ||
392 | /** | |
393 | * @struct sp_port | |
394 | * An opaque structure representing a serial port. | |
395 | */ | |
396 | struct sp_port; | |
397 | ||
398 | /** | |
399 | * @struct sp_port_config | |
400 | * An opaque structure representing the configuration for a serial port. | |
401 | */ | |
402 | struct sp_port_config; | |
403 | ||
404 | /** | |
405 | * @struct sp_event_set | |
406 | * A set of handles to wait on for events. | |
407 | */ | |
408 | struct sp_event_set { | |
409 | /** Array of OS-specific handles. */ | |
410 | void *handles; | |
411 | /** Array of bitmasks indicating which events apply for each handle. */ | |
412 | enum sp_event *masks; | |
413 | /** Number of handles. */ | |
414 | unsigned int count; | |
415 | }; | |
416 | ||
417 | /** | |
418 | * @defgroup Enumeration Port enumeration | |
419 | * | |
420 | * Enumerating the serial ports of a system. | |
421 | * | |
422 | * @{ | |
423 | */ | |
424 | ||
425 | /** | |
426 | * Obtain a pointer to a new sp_port structure representing the named port. | |
427 | * | |
428 | * The user should allocate a variable of type "struct sp_port *" and pass a | |
429 | * pointer to this to receive the result. | |
430 | * | |
431 | * The result should be freed after use by calling sp_free_port(). | |
432 | * | |
433 | * @param[in] portname The OS-specific name of a serial port. Must not be NULL. | |
434 | * @param[out] port_ptr If any error is returned, the variable pointed to by | |
435 | * port_ptr will be set to NULL. Otherwise, it will be set | |
436 | * to point to the newly allocated port. Must not be NULL. | |
437 | * | |
438 | * @return SP_OK upon success, a negative error code otherwise. | |
439 | * | |
440 | * @since 0.1.0 | |
441 | */ | |
442 | enum sp_return sp_get_port_by_name(const char *portname, struct sp_port **port_ptr); | |
443 | ||
444 | /** | |
445 | * Free a port structure obtained from sp_get_port_by_name() or sp_copy_port(). | |
446 | * | |
447 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
448 | * | |
449 | * @since 0.1.0 | |
450 | */ | |
451 | void sp_free_port(struct sp_port *port); | |
452 | ||
453 | /** | |
454 | * List the serial ports available on the system. | |
455 | * | |
456 | * The result obtained is an array of pointers to sp_port structures, | |
457 | * terminated by a NULL. The user should allocate a variable of type | |
458 | * "struct sp_port **" and pass a pointer to this to receive the result. | |
459 | * | |
460 | * The result should be freed after use by calling sp_free_port_list(). | |
461 | * If a port from the list is to be used after freeing the list, it must be | |
462 | * copied first using sp_copy_port(). | |
463 | * | |
464 | * @param[out] list_ptr If any error is returned, the variable pointed to by | |
465 | * list_ptr will be set to NULL. Otherwise, it will be set | |
466 | * to point to the newly allocated array. Must not be NULL. | |
467 | * | |
468 | * @return SP_OK upon success, a negative error code otherwise. | |
469 | * | |
470 | * @since 0.1.0 | |
471 | */ | |
472 | enum sp_return sp_list_ports(struct sp_port ***list_ptr); | |
473 | ||
474 | /** | |
475 | * Make a new copy of an sp_port structure. | |
476 | * | |
477 | * The user should allocate a variable of type "struct sp_port *" and pass a | |
478 | * pointer to this to receive the result. | |
479 | * | |
480 | * The copy should be freed after use by calling sp_free_port(). | |
481 | * | |
482 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
483 | * @param[out] copy_ptr If any error is returned, the variable pointed to by | |
484 | * copy_ptr will be set to NULL. Otherwise, it will be set | |
485 | * to point to the newly allocated copy. Must not be NULL. | |
486 | * | |
487 | * @return SP_OK upon success, a negative error code otherwise. | |
488 | * | |
489 | * @since 0.1.0 | |
490 | */ | |
491 | enum sp_return sp_copy_port(const struct sp_port *port, struct sp_port **copy_ptr); | |
492 | ||
493 | /** | |
494 | * Free a port list obtained from sp_list_ports(). | |
495 | * | |
496 | * This will also free all the sp_port structures referred to from the list; | |
497 | * any that are to be retained must be copied first using sp_copy_port(). | |
498 | * | |
499 | * @param[in] ports Pointer to a list of port structures. Must not be NULL. | |
500 | * | |
501 | * @since 0.1.0 | |
502 | */ | |
503 | void sp_free_port_list(struct sp_port **ports); | |
504 | ||
505 | /** | |
506 | * @} | |
507 | * @defgroup Ports Port handling | |
508 | * | |
509 | * Opening, closing and querying ports. | |
510 | * | |
511 | * @{ | |
512 | */ | |
513 | ||
514 | /** | |
515 | * Open the specified serial port. | |
516 | * | |
517 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
518 | * @param[in] flags Flags to use when opening the serial port. | |
519 | * | |
520 | * @return SP_OK upon success, a negative error code otherwise. | |
521 | * | |
522 | * @since 0.1.0 | |
523 | */ | |
524 | enum sp_return sp_open(struct sp_port *port, enum sp_mode flags); | |
525 | ||
526 | /** | |
527 | * Close the specified serial port. | |
528 | * | |
529 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
530 | * | |
531 | * @return SP_OK upon success, a negative error code otherwise. | |
532 | * | |
533 | * @since 0.1.0 | |
534 | */ | |
535 | enum sp_return sp_close(struct sp_port *port); | |
536 | ||
537 | /** | |
538 | * Get the name of a port. | |
539 | * | |
540 | * The name returned is whatever is normally used to refer to a port on the | |
541 | * current operating system; e.g. for Windows it will usually be a "COMn" | |
542 | * device name, and for Unix it will be a device path beginning with "/dev/". | |
543 | * | |
544 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
545 | * | |
546 | * @return The port name, or NULL if an invalid port is passed. The name | |
547 | * string is part of the port structure and may not be used after | |
548 | * the port structure has been freed. | |
549 | * | |
550 | * @since 0.1.0 | |
551 | */ | |
552 | char *sp_get_port_name(const struct sp_port *port); | |
553 | ||
554 | /** | |
555 | * Get a description for a port, to present to end user. | |
556 | * | |
557 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
558 | * | |
559 | * @return The port description, or NULL if an invalid port is passed. | |
560 | * The description string is part of the port structure and may not | |
561 | * be used after the port structure has been freed. | |
562 | * | |
563 | * @since 0.1.1 | |
564 | */ | |
565 | char *sp_get_port_description(const struct sp_port *port); | |
566 | ||
567 | /** | |
568 | * Get the transport type used by a port. | |
569 | * | |
570 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
571 | * | |
572 | * @return The port transport type. | |
573 | * | |
574 | * @since 0.1.1 | |
575 | */ | |
576 | enum sp_transport sp_get_port_transport(const struct sp_port *port); | |
577 | ||
578 | /** | |
579 | * Get the USB bus number and address on bus of a USB serial adapter port. | |
580 | * | |
581 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
582 | * @param[out] usb_bus Pointer to a variable to store the USB bus. | |
583 | * Can be NULL (in that case it will be ignored). | |
584 | * @param[out] usb_address Pointer to a variable to store the USB address. | |
585 | * Can be NULL (in that case it will be ignored). | |
586 | * | |
587 | * @return SP_OK upon success, a negative error code otherwise. | |
588 | * | |
589 | * @since 0.1.1 | |
590 | */ | |
591 | enum sp_return sp_get_port_usb_bus_address(const struct sp_port *port, | |
592 | int *usb_bus, int *usb_address); | |
593 | ||
594 | /** | |
595 | * Get the USB Vendor ID and Product ID of a USB serial adapter port. | |
596 | * | |
597 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
598 | * @param[out] usb_vid Pointer to a variable to store the USB VID. | |
599 | * Can be NULL (in that case it will be ignored). | |
600 | * @param[out] usb_pid Pointer to a variable to store the USB PID. | |
601 | * Can be NULL (in that case it will be ignored). | |
602 | * | |
603 | * @return SP_OK upon success, a negative error code otherwise. | |
604 | * | |
605 | * @since 0.1.1 | |
606 | */ | |
607 | enum sp_return sp_get_port_usb_vid_pid(const struct sp_port *port, int *usb_vid, int *usb_pid); | |
608 | ||
609 | /** | |
610 | * Get the USB manufacturer string of a USB serial adapter port. | |
611 | * | |
612 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
613 | * | |
614 | * @return The port manufacturer string, or NULL if an invalid port is passed. | |
615 | * The manufacturer string is part of the port structure and may not | |
616 | * be used after the port structure has been freed. | |
617 | * | |
618 | * @since 0.1.1 | |
619 | */ | |
620 | char *sp_get_port_usb_manufacturer(const struct sp_port *port); | |
621 | ||
622 | /** | |
623 | * Get the USB product string of a USB serial adapter port. | |
624 | * | |
625 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
626 | * | |
627 | * @return The port product string, or NULL if an invalid port is passed. | |
628 | * The product string is part of the port structure and may not be | |
629 | * used after the port structure has been freed. | |
630 | * | |
631 | * @since 0.1.1 | |
632 | */ | |
633 | char *sp_get_port_usb_product(const struct sp_port *port); | |
634 | ||
635 | /** | |
636 | * Get the USB serial number string of a USB serial adapter port. | |
637 | * | |
638 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
639 | * | |
640 | * @return The port serial number, or NULL if an invalid port is passed. | |
641 | * The serial number string is part of the port structure and may | |
642 | * not be used after the port structure has been freed. | |
643 | * | |
644 | * @since 0.1.1 | |
645 | */ | |
646 | char *sp_get_port_usb_serial(const struct sp_port *port); | |
647 | ||
648 | /** | |
649 | * Get the MAC address of a Bluetooth serial adapter port. | |
650 | * | |
651 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
652 | * | |
653 | * @return The port MAC address, or NULL if an invalid port is passed. | |
654 | * The MAC address string is part of the port structure and may not | |
655 | * be used after the port structure has been freed. | |
656 | * | |
657 | * @since 0.1.1 | |
658 | */ | |
659 | char *sp_get_port_bluetooth_address(const struct sp_port *port); | |
660 | ||
661 | /** | |
662 | * Get the operating system handle for a port. | |
663 | * | |
664 | * The type of the handle depends on the operating system. On Unix based | |
665 | * systems, the handle is a file descriptor of type "int". On Windows, the | |
666 | * handle is of type "HANDLE". The user should allocate a variable of the | |
667 | * appropriate type and pass a pointer to this to receive the result. | |
668 | * | |
669 | * To obtain a valid handle, the port must first be opened by calling | |
670 | * sp_open() using the same port structure. | |
671 | * | |
672 | * After the port is closed or the port structure freed, the handle may | |
673 | * no longer be valid. | |
674 | * | |
675 | * @warning This feature is provided so that programs may make use of | |
676 | * OS-specific functionality where desired. Doing so obviously | |
677 | * comes at a cost in portability. It also cannot be guaranteed | |
678 | * that direct usage of the OS handle will not conflict with the | |
679 | * library's own usage of the port. Be careful. | |
680 | * | |
681 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
682 | * @param[out] result_ptr If any error is returned, the variable pointed to by | |
683 | * result_ptr will have unknown contents and should not | |
684 | * be used. Otherwise, it will be set to point to the | |
685 | * OS handle. Must not be NULL. | |
686 | * | |
687 | * @return SP_OK upon success, a negative error code otherwise. | |
688 | * | |
689 | * @since 0.1.0 | |
690 | */ | |
691 | enum sp_return sp_get_port_handle(const struct sp_port *port, void *result_ptr); | |
692 | ||
693 | /** | |
694 | * @} | |
695 | * | |
696 | * @defgroup Configuration Configuration | |
697 | * | |
698 | * Setting and querying serial port parameters. | |
699 | * @{ | |
700 | */ | |
701 | ||
702 | /** | |
703 | * Allocate a port configuration structure. | |
704 | * | |
705 | * The user should allocate a variable of type "struct sp_port_config *" and | |
706 | * pass a pointer to this to receive the result. The variable will be updated | |
707 | * to point to the new configuration structure. The structure is opaque and | |
708 | * must be accessed via the functions provided. | |
709 | * | |
710 | * All parameters in the structure will be initialised to special values which | |
711 | * are ignored by sp_set_config(). | |
712 | * | |
713 | * The structure should be freed after use by calling sp_free_config(). | |
714 | * | |
715 | * @param[out] config_ptr If any error is returned, the variable pointed to by | |
716 | * config_ptr will be set to NULL. Otherwise, it will | |
717 | * be set to point to the allocated config structure. | |
718 | * Must not be NULL. | |
719 | * | |
720 | * @return SP_OK upon success, a negative error code otherwise. | |
721 | * | |
722 | * @since 0.1.0 | |
723 | */ | |
724 | enum sp_return sp_new_config(struct sp_port_config **config_ptr); | |
725 | ||
726 | /** | |
727 | * Free a port configuration structure. | |
728 | * | |
729 | * @param[in] config Pointer to a configuration structure. Must not be NULL. | |
730 | * | |
731 | * @since 0.1.0 | |
732 | */ | |
733 | void sp_free_config(struct sp_port_config *config); | |
734 | ||
735 | /** | |
736 | * Get the current configuration of the specified serial port. | |
737 | * | |
738 | * The user should allocate a configuration structure using sp_new_config() | |
739 | * and pass this as the config parameter. The configuration structure will | |
740 | * be updated with the port configuration. | |
741 | * | |
742 | * Any parameters that are configured with settings not recognised or | |
743 | * supported by libserialport, will be set to special values that are | |
744 | * ignored by sp_set_config(). | |
745 | * | |
746 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
747 | * @param[out] config Pointer to a configuration structure that will hold | |
748 | * the result. Upon errors the contents of the config | |
749 | * struct will not be changed. Must not be NULL. | |
750 | * | |
751 | * @return SP_OK upon success, a negative error code otherwise. | |
752 | * | |
753 | * @since 0.1.0 | |
754 | */ | |
755 | enum sp_return sp_get_config(struct sp_port *port, struct sp_port_config *config); | |
756 | ||
757 | /** | |
758 | * Set the configuration for the specified serial port. | |
759 | * | |
760 | * For each parameter in the configuration, there is a special value (usually | |
761 | * -1, but see the documentation for each field). These values will be ignored | |
762 | * and the corresponding setting left unchanged on the port. | |
763 | * | |
764 | * Upon errors, the configuration of the serial port is unknown since | |
765 | * partial/incomplete config updates may have happened. | |
766 | * | |
767 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
768 | * @param[in] config Pointer to a configuration structure. Must not be NULL. | |
769 | * | |
770 | * @return SP_OK upon success, a negative error code otherwise. | |
771 | * | |
772 | * @since 0.1.0 | |
773 | */ | |
774 | enum sp_return sp_set_config(struct sp_port *port, const struct sp_port_config *config); | |
775 | ||
776 | /** | |
777 | * Set the baud rate for the specified serial port. | |
778 | * | |
779 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
780 | * @param[in] baudrate Baud rate in bits per second. | |
781 | * | |
782 | * @return SP_OK upon success, a negative error code otherwise. | |
783 | * | |
784 | * @since 0.1.0 | |
785 | */ | |
786 | enum sp_return sp_set_baudrate(struct sp_port *port, int baudrate); | |
787 | ||
788 | /** | |
789 | * Get the baud rate from a port configuration. | |
790 | * | |
791 | * The user should allocate a variable of type int and | |
792 | * pass a pointer to this to receive the result. | |
793 | * | |
794 | * @param[in] config Pointer to a configuration structure. Must not be NULL. | |
795 | * @param[out] baudrate_ptr Pointer to a variable to store the result. Must not be NULL. | |
796 | * | |
797 | * @return SP_OK upon success, a negative error code otherwise. | |
798 | * | |
799 | * @since 0.1.0 | |
800 | */ | |
801 | enum sp_return sp_get_config_baudrate(const struct sp_port_config *config, int *baudrate_ptr); | |
802 | ||
803 | /** | |
804 | * Set the baud rate in a port configuration. | |
805 | * | |
806 | * @param[in] config Pointer to a configuration structure. Must not be NULL. | |
807 | * @param[in] baudrate Baud rate in bits per second, or -1 to retain the current setting. | |
808 | * | |
809 | * @return SP_OK upon success, a negative error code otherwise. | |
810 | * | |
811 | * @since 0.1.0 | |
812 | */ | |
813 | enum sp_return sp_set_config_baudrate(struct sp_port_config *config, int baudrate); | |
814 | ||
815 | /** | |
816 | * Set the data bits for the specified serial port. | |
817 | * | |
818 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
819 | * @param[in] bits Number of data bits. | |
820 | * | |
821 | * @return SP_OK upon success, a negative error code otherwise. | |
822 | * | |
823 | * @since 0.1.0 | |
824 | */ | |
825 | enum sp_return sp_set_bits(struct sp_port *port, int bits); | |
826 | ||
827 | /** | |
828 | * Get the data bits from a port configuration. | |
829 | * | |
830 | * The user should allocate a variable of type int and | |
831 | * pass a pointer to this to receive the result. | |
832 | * | |
833 | * @param[in] config Pointer to a configuration structure. Must not be NULL. | |
834 | * @param[out] bits_ptr Pointer to a variable to store the result. Must not be NULL. | |
835 | * | |
836 | * @return SP_OK upon success, a negative error code otherwise. | |
837 | * | |
838 | * @since 0.1.0 | |
839 | */ | |
840 | enum sp_return sp_get_config_bits(const struct sp_port_config *config, int *bits_ptr); | |
841 | ||
842 | /** | |
843 | * Set the data bits in a port configuration. | |
844 | * | |
845 | * @param[in] config Pointer to a configuration structure. Must not be NULL. | |
846 | * @param[in] bits Number of data bits, or -1 to retain the current setting. | |
847 | * | |
848 | * @return SP_OK upon success, a negative error code otherwise. | |
849 | * | |
850 | * @since 0.1.0 | |
851 | */ | |
852 | enum sp_return sp_set_config_bits(struct sp_port_config *config, int bits); | |
853 | ||
854 | /** | |
855 | * Set the parity setting for the specified serial port. | |
856 | * | |
857 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
858 | * @param[in] parity Parity setting. | |
859 | * | |
860 | * @return SP_OK upon success, a negative error code otherwise. | |
861 | * | |
862 | * @since 0.1.0 | |
863 | */ | |
864 | enum sp_return sp_set_parity(struct sp_port *port, enum sp_parity parity); | |
865 | ||
866 | /** | |
867 | * Get the parity setting from a port configuration. | |
868 | * | |
869 | * The user should allocate a variable of type enum sp_parity and | |
870 | * pass a pointer to this to receive the result. | |
871 | * | |
872 | * @param[in] config Pointer to a configuration structure. Must not be NULL. | |
873 | * @param[out] parity_ptr Pointer to a variable to store the result. Must not be NULL. | |
874 | * | |
875 | * @return SP_OK upon success, a negative error code otherwise. | |
876 | * | |
877 | * @since 0.1.0 | |
878 | */ | |
879 | enum sp_return sp_get_config_parity(const struct sp_port_config *config, enum sp_parity *parity_ptr); | |
880 | ||
881 | /** | |
882 | * Set the parity setting in a port configuration. | |
883 | * | |
884 | * @param[in] config Pointer to a configuration structure. Must not be NULL. | |
885 | * @param[in] parity Parity setting, or -1 to retain the current setting. | |
886 | * | |
887 | * @return SP_OK upon success, a negative error code otherwise. | |
888 | * | |
889 | * @since 0.1.0 | |
890 | */ | |
891 | enum sp_return sp_set_config_parity(struct sp_port_config *config, enum sp_parity parity); | |
892 | ||
893 | /** | |
894 | * Set the stop bits for the specified serial port. | |
895 | * | |
896 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
897 | * @param[in] stopbits Number of stop bits. | |
898 | * | |
899 | * @return SP_OK upon success, a negative error code otherwise. | |
900 | * | |
901 | * @since 0.1.0 | |
902 | */ | |
903 | enum sp_return sp_set_stopbits(struct sp_port *port, int stopbits); | |
904 | ||
905 | /** | |
906 | * Get the stop bits from a port configuration. | |
907 | * | |
908 | * The user should allocate a variable of type int and | |
909 | * pass a pointer to this to receive the result. | |
910 | * | |
911 | * @param[in] config Pointer to a configuration structure. Must not be NULL. | |
912 | * @param[out] stopbits_ptr Pointer to a variable to store the result. Must not be NULL. | |
913 | * | |
914 | * @return SP_OK upon success, a negative error code otherwise. | |
915 | * | |
916 | * @since 0.1.0 | |
917 | */ | |
918 | enum sp_return sp_get_config_stopbits(const struct sp_port_config *config, int *stopbits_ptr); | |
919 | ||
920 | /** | |
921 | * Set the stop bits in a port configuration. | |
922 | * | |
923 | * @param[in] config Pointer to a configuration structure. Must not be NULL. | |
924 | * @param[in] stopbits Number of stop bits, or -1 to retain the current setting. | |
925 | * | |
926 | * @return SP_OK upon success, a negative error code otherwise. | |
927 | * | |
928 | * @since 0.1.0 | |
929 | */ | |
930 | enum sp_return sp_set_config_stopbits(struct sp_port_config *config, int stopbits); | |
931 | ||
932 | /** | |
933 | * Set the RTS pin behaviour for the specified serial port. | |
934 | * | |
935 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
936 | * @param[in] rts RTS pin mode. | |
937 | * | |
938 | * @return SP_OK upon success, a negative error code otherwise. | |
939 | * | |
940 | * @since 0.1.0 | |
941 | */ | |
942 | enum sp_return sp_set_rts(struct sp_port *port, enum sp_rts rts); | |
943 | ||
944 | /** | |
945 | * Get the RTS pin behaviour from a port configuration. | |
946 | * | |
947 | * The user should allocate a variable of type enum sp_rts and | |
948 | * pass a pointer to this to receive the result. | |
949 | * | |
950 | * @param[in] config Pointer to a configuration structure. Must not be NULL. | |
951 | * @param[out] rts_ptr Pointer to a variable to store the result. Must not be NULL. | |
952 | * | |
953 | * @return SP_OK upon success, a negative error code otherwise. | |
954 | * | |
955 | * @since 0.1.0 | |
956 | */ | |
957 | enum sp_return sp_get_config_rts(const struct sp_port_config *config, enum sp_rts *rts_ptr); | |
958 | ||
959 | /** | |
960 | * Set the RTS pin behaviour in a port configuration. | |
961 | * | |
962 | * @param[in] config Pointer to a configuration structure. Must not be NULL. | |
963 | * @param[in] rts RTS pin mode, or -1 to retain the current setting. | |
964 | * | |
965 | * @return SP_OK upon success, a negative error code otherwise. | |
966 | * | |
967 | * @since 0.1.0 | |
968 | */ | |
969 | enum sp_return sp_set_config_rts(struct sp_port_config *config, enum sp_rts rts); | |
970 | ||
971 | /** | |
972 | * Set the CTS pin behaviour for the specified serial port. | |
973 | * | |
974 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
975 | * @param[in] cts CTS pin mode. | |
976 | * | |
977 | * @return SP_OK upon success, a negative error code otherwise. | |
978 | * | |
979 | * @since 0.1.0 | |
980 | */ | |
981 | enum sp_return sp_set_cts(struct sp_port *port, enum sp_cts cts); | |
982 | ||
983 | /** | |
984 | * Get the CTS pin behaviour from a port configuration. | |
985 | * | |
986 | * The user should allocate a variable of type enum sp_cts and | |
987 | * pass a pointer to this to receive the result. | |
988 | * | |
989 | * @param[in] config Pointer to a configuration structure. Must not be NULL. | |
990 | * @param[out] cts_ptr Pointer to a variable to store the result. Must not be NULL. | |
991 | * | |
992 | * @return SP_OK upon success, a negative error code otherwise. | |
993 | * | |
994 | * @since 0.1.0 | |
995 | */ | |
996 | enum sp_return sp_get_config_cts(const struct sp_port_config *config, enum sp_cts *cts_ptr); | |
997 | ||
998 | /** | |
999 | * Set the CTS pin behaviour in a port configuration. | |
1000 | * | |
1001 | * @param[in] config Pointer to a configuration structure. Must not be NULL. | |
1002 | * @param[in] cts CTS pin mode, or -1 to retain the current setting. | |
1003 | * | |
1004 | * @return SP_OK upon success, a negative error code otherwise. | |
1005 | * | |
1006 | * @since 0.1.0 | |
1007 | */ | |
1008 | enum sp_return sp_set_config_cts(struct sp_port_config *config, enum sp_cts cts); | |
1009 | ||
1010 | /** | |
1011 | * Set the DTR pin behaviour for the specified serial port. | |
1012 | * | |
1013 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
1014 | * @param[in] dtr DTR pin mode. | |
1015 | * | |
1016 | * @return SP_OK upon success, a negative error code otherwise. | |
1017 | * | |
1018 | * @since 0.1.0 | |
1019 | */ | |
1020 | enum sp_return sp_set_dtr(struct sp_port *port, enum sp_dtr dtr); | |
1021 | ||
1022 | /** | |
1023 | * Get the DTR pin behaviour from a port configuration. | |
1024 | * | |
1025 | * The user should allocate a variable of type enum sp_dtr and | |
1026 | * pass a pointer to this to receive the result. | |
1027 | * | |
1028 | * @param[in] config Pointer to a configuration structure. Must not be NULL. | |
1029 | * @param[out] dtr_ptr Pointer to a variable to store the result. Must not be NULL. | |
1030 | * | |
1031 | * @return SP_OK upon success, a negative error code otherwise. | |
1032 | * | |
1033 | * @since 0.1.0 | |
1034 | */ | |
1035 | enum sp_return sp_get_config_dtr(const struct sp_port_config *config, enum sp_dtr *dtr_ptr); | |
1036 | ||
1037 | /** | |
1038 | * Set the DTR pin behaviour in a port configuration. | |
1039 | * | |
1040 | * @param[in] config Pointer to a configuration structure. Must not be NULL. | |
1041 | * @param[in] dtr DTR pin mode, or -1 to retain the current setting. | |
1042 | * | |
1043 | * @return SP_OK upon success, a negative error code otherwise. | |
1044 | * | |
1045 | * @since 0.1.0 | |
1046 | */ | |
1047 | enum sp_return sp_set_config_dtr(struct sp_port_config *config, enum sp_dtr dtr); | |
1048 | ||
1049 | /** | |
1050 | * Set the DSR pin behaviour for the specified serial port. | |
1051 | * | |
1052 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
1053 | * @param[in] dsr DSR pin mode. | |
1054 | * | |
1055 | * @return SP_OK upon success, a negative error code otherwise. | |
1056 | * | |
1057 | * @since 0.1.0 | |
1058 | */ | |
1059 | enum sp_return sp_set_dsr(struct sp_port *port, enum sp_dsr dsr); | |
1060 | ||
1061 | /** | |
1062 | * Get the DSR pin behaviour from a port configuration. | |
1063 | * | |
1064 | * The user should allocate a variable of type enum sp_dsr and | |
1065 | * pass a pointer to this to receive the result. | |
1066 | * | |
1067 | * @param[in] config Pointer to a configuration structure. Must not be NULL. | |
1068 | * @param[out] dsr_ptr Pointer to a variable to store the result. Must not be NULL. | |
1069 | * | |
1070 | * @return SP_OK upon success, a negative error code otherwise. | |
1071 | * | |
1072 | * @since 0.1.0 | |
1073 | */ | |
1074 | enum sp_return sp_get_config_dsr(const struct sp_port_config *config, enum sp_dsr *dsr_ptr); | |
1075 | ||
1076 | /** | |
1077 | * Set the DSR pin behaviour in a port configuration. | |
1078 | * | |
1079 | * @param[in] config Pointer to a configuration structure. Must not be NULL. | |
1080 | * @param[in] dsr DSR pin mode, or -1 to retain the current setting. | |
1081 | * | |
1082 | * @return SP_OK upon success, a negative error code otherwise. | |
1083 | * | |
1084 | * @since 0.1.0 | |
1085 | */ | |
1086 | enum sp_return sp_set_config_dsr(struct sp_port_config *config, enum sp_dsr dsr); | |
1087 | ||
1088 | /** | |
1089 | * Set the XON/XOFF configuration for the specified serial port. | |
1090 | * | |
1091 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
1092 | * @param[in] xon_xoff XON/XOFF mode. | |
1093 | * | |
1094 | * @return SP_OK upon success, a negative error code otherwise. | |
1095 | * | |
1096 | * @since 0.1.0 | |
1097 | */ | |
1098 | enum sp_return sp_set_xon_xoff(struct sp_port *port, enum sp_xonxoff xon_xoff); | |
1099 | ||
1100 | /** | |
1101 | * Get the XON/XOFF configuration from a port configuration. | |
1102 | * | |
1103 | * The user should allocate a variable of type enum sp_xonxoff and | |
1104 | * pass a pointer to this to receive the result. | |
1105 | * | |
1106 | * @param[in] config Pointer to a configuration structure. Must not be NULL. | |
1107 | * @param[out] xon_xoff_ptr Pointer to a variable to store the result. Must not be NULL. | |
1108 | * | |
1109 | * @return SP_OK upon success, a negative error code otherwise. | |
1110 | * | |
1111 | * @since 0.1.0 | |
1112 | */ | |
1113 | enum sp_return sp_get_config_xon_xoff(const struct sp_port_config *config, enum sp_xonxoff *xon_xoff_ptr); | |
1114 | ||
1115 | /** | |
1116 | * Set the XON/XOFF configuration in a port configuration. | |
1117 | * | |
1118 | * @param[in] config Pointer to a configuration structure. Must not be NULL. | |
1119 | * @param[in] xon_xoff XON/XOFF mode, or -1 to retain the current setting. | |
1120 | * | |
1121 | * @return SP_OK upon success, a negative error code otherwise. | |
1122 | * | |
1123 | * @since 0.1.0 | |
1124 | */ | |
1125 | enum sp_return sp_set_config_xon_xoff(struct sp_port_config *config, enum sp_xonxoff xon_xoff); | |
1126 | ||
1127 | /** | |
1128 | * Set the flow control type in a port configuration. | |
1129 | * | |
1130 | * This function is a wrapper that sets the RTS, CTS, DTR, DSR and | |
1131 | * XON/XOFF settings as necessary for the specified flow control | |
1132 | * type. For more fine-grained control of these settings, use their | |
1133 | * individual configuration functions. | |
1134 | * | |
1135 | * @param[in] config Pointer to a configuration structure. Must not be NULL. | |
1136 | * @param[in] flowcontrol Flow control setting to use. | |
1137 | * | |
1138 | * @return SP_OK upon success, a negative error code otherwise. | |
1139 | * | |
1140 | * @since 0.1.0 | |
1141 | */ | |
1142 | enum sp_return sp_set_config_flowcontrol(struct sp_port_config *config, enum sp_flowcontrol flowcontrol); | |
1143 | ||
1144 | /** | |
1145 | * Set the flow control type for the specified serial port. | |
1146 | * | |
1147 | * This function is a wrapper that sets the RTS, CTS, DTR, DSR and | |
1148 | * XON/XOFF settings as necessary for the specified flow control | |
1149 | * type. For more fine-grained control of these settings, use their | |
1150 | * individual configuration functions. | |
1151 | * | |
1152 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
1153 | * @param[in] flowcontrol Flow control setting to use. | |
1154 | * | |
1155 | * @return SP_OK upon success, a negative error code otherwise. | |
1156 | * | |
1157 | * @since 0.1.0 | |
1158 | */ | |
1159 | enum sp_return sp_set_flowcontrol(struct sp_port *port, enum sp_flowcontrol flowcontrol); | |
1160 | ||
1161 | /** | |
1162 | * @} | |
1163 | * | |
1164 | * @defgroup Data Data handling | |
1165 | * | |
1166 | * Reading, writing, and flushing data. | |
1167 | * | |
1168 | * @{ | |
1169 | */ | |
1170 | ||
1171 | /** | |
1172 | * Read bytes from the specified serial port, blocking until complete. | |
1173 | * | |
1174 | * @warning If your program runs on Unix, defines its own signal handlers, and | |
1175 | * needs to abort blocking reads when these are called, then you | |
1176 | * should not use this function. It repeats system calls that return | |
1177 | * with EINTR. To be able to abort a read from a signal handler, you | |
1178 | * should implement your own blocking read using sp_nonblocking_read() | |
1179 | * together with a blocking method that makes sense for your program. | |
1180 | * E.g. you can obtain the file descriptor for an open port using | |
1181 | * sp_get_port_handle() and use this to call select() or pselect(), | |
1182 | * with appropriate arrangements to return if a signal is received. | |
1183 | * | |
1184 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
1185 | * @param[out] buf Buffer in which to store the bytes read. Must not be NULL. | |
1186 | * @param[in] count Requested number of bytes to read. | |
1187 | * @param[in] timeout_ms Timeout in milliseconds, or zero to wait indefinitely. | |
1188 | * | |
1189 | * @return The number of bytes read on success, or a negative error code. If | |
1190 | * the number of bytes returned is less than that requested, the | |
1191 | * timeout was reached before the requested number of bytes was | |
1192 | * available. If timeout is zero, the function will always return | |
1193 | * either the requested number of bytes or a negative error code. | |
1194 | * | |
1195 | * @since 0.1.0 | |
1196 | */ | |
1197 | enum sp_return sp_blocking_read(struct sp_port *port, void *buf, size_t count, unsigned int timeout_ms); | |
1198 | ||
1199 | /** | |
1200 | * Read bytes from the specified serial port, returning as soon as any data is | |
1201 | * available. | |
1202 | * | |
1203 | * @warning If your program runs on Unix, defines its own signal handlers, and | |
1204 | * needs to abort blocking reads when these are called, then you | |
1205 | * should not use this function. It repeats system calls that return | |
1206 | * with EINTR. To be able to abort a read from a signal handler, you | |
1207 | * should implement your own blocking read using sp_nonblocking_read() | |
1208 | * together with a blocking method that makes sense for your program. | |
1209 | * E.g. you can obtain the file descriptor for an open port using | |
1210 | * sp_get_port_handle() and use this to call select() or pselect(), | |
1211 | * with appropriate arrangements to return if a signal is received. | |
1212 | * | |
1213 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
1214 | * @param[out] buf Buffer in which to store the bytes read. Must not be NULL. | |
1215 | * @param[in] count Maximum number of bytes to read. Must not be zero. | |
1216 | * @param[in] timeout_ms Timeout in milliseconds, or zero to wait indefinitely. | |
1217 | * | |
1218 | * @return The number of bytes read on success, or a negative error code. If | |
1219 | * the result is zero, the timeout was reached before any bytes were | |
1220 | * available. If timeout_ms is zero, the function will always return | |
1221 | * either at least one byte, or a negative error code. | |
1222 | * | |
1223 | * @since 0.1.1 | |
1224 | */ | |
1225 | enum sp_return sp_blocking_read_next(struct sp_port *port, void *buf, size_t count, unsigned int timeout_ms); | |
1226 | ||
1227 | /** | |
1228 | * Read bytes from the specified serial port, without blocking. | |
1229 | * | |
1230 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
1231 | * @param[out] buf Buffer in which to store the bytes read. Must not be NULL. | |
1232 | * @param[in] count Maximum number of bytes to read. | |
1233 | * | |
1234 | * @return The number of bytes read on success, or a negative error code. The | |
1235 | * number of bytes returned may be any number from zero to the maximum | |
1236 | * that was requested. | |
1237 | * | |
1238 | * @since 0.1.0 | |
1239 | */ | |
1240 | enum sp_return sp_nonblocking_read(struct sp_port *port, void *buf, size_t count); | |
1241 | ||
1242 | /** | |
1243 | * Write bytes to the specified serial port, blocking until complete. | |
1244 | * | |
1245 | * Note that this function only ensures that the accepted bytes have been | |
1246 | * written to the OS; they may be held in driver or hardware buffers and not | |
1247 | * yet physically transmitted. To check whether all written bytes have actually | |
1248 | * been transmitted, use the sp_output_waiting() function. To wait until all | |
1249 | * written bytes have actually been transmitted, use the sp_drain() function. | |
1250 | * | |
1251 | * @warning If your program runs on Unix, defines its own signal handlers, and | |
1252 | * needs to abort blocking writes when these are called, then you | |
1253 | * should not use this function. It repeats system calls that return | |
1254 | * with EINTR. To be able to abort a write from a signal handler, you | |
1255 | * should implement your own blocking write using sp_nonblocking_write() | |
1256 | * together with a blocking method that makes sense for your program. | |
1257 | * E.g. you can obtain the file descriptor for an open port using | |
1258 | * sp_get_port_handle() and use this to call select() or pselect(), | |
1259 | * with appropriate arrangements to return if a signal is received. | |
1260 | * | |
1261 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
1262 | * @param[in] buf Buffer containing the bytes to write. Must not be NULL. | |
1263 | * @param[in] count Requested number of bytes to write. | |
1264 | * @param[in] timeout_ms Timeout in milliseconds, or zero to wait indefinitely. | |
1265 | * | |
1266 | * @return The number of bytes written on success, or a negative error code. | |
1267 | * If the number of bytes returned is less than that requested, the | |
1268 | * timeout was reached before the requested number of bytes was | |
1269 | * written. If timeout is zero, the function will always return | |
1270 | * either the requested number of bytes or a negative error code. In | |
1271 | * the event of an error there is no way to determine how many bytes | |
1272 | * were sent before the error occurred. | |
1273 | * | |
1274 | * @since 0.1.0 | |
1275 | */ | |
1276 | enum sp_return sp_blocking_write(struct sp_port *port, const void *buf, size_t count, unsigned int timeout_ms); | |
1277 | ||
1278 | /** | |
1279 | * Write bytes to the specified serial port, without blocking. | |
1280 | * | |
1281 | * Note that this function only ensures that the accepted bytes have been | |
1282 | * written to the OS; they may be held in driver or hardware buffers and not | |
1283 | * yet physically transmitted. To check whether all written bytes have actually | |
1284 | * been transmitted, use the sp_output_waiting() function. To wait until all | |
1285 | * written bytes have actually been transmitted, use the sp_drain() function. | |
1286 | * | |
1287 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
1288 | * @param[in] buf Buffer containing the bytes to write. Must not be NULL. | |
1289 | * @param[in] count Maximum number of bytes to write. | |
1290 | * | |
1291 | * @return The number of bytes written on success, or a negative error code. | |
1292 | * The number of bytes returned may be any number from zero to the | |
1293 | * maximum that was requested. | |
1294 | * | |
1295 | * @since 0.1.0 | |
1296 | */ | |
1297 | enum sp_return sp_nonblocking_write(struct sp_port *port, const void *buf, size_t count); | |
1298 | ||
1299 | /** | |
1300 | * Gets the number of bytes waiting in the input buffer. | |
1301 | * | |
1302 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
1303 | * | |
1304 | * @return Number of bytes waiting on success, a negative error code otherwise. | |
1305 | * | |
1306 | * @since 0.1.0 | |
1307 | */ | |
1308 | enum sp_return sp_input_waiting(struct sp_port *port); | |
1309 | ||
1310 | /** | |
1311 | * Gets the number of bytes waiting in the output buffer. | |
1312 | * | |
1313 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
1314 | * | |
1315 | * @return Number of bytes waiting on success, a negative error code otherwise. | |
1316 | * | |
1317 | * @since 0.1.0 | |
1318 | */ | |
1319 | enum sp_return sp_output_waiting(struct sp_port *port); | |
1320 | ||
1321 | /** | |
1322 | * Flush serial port buffers. Data in the selected buffer(s) is discarded. | |
1323 | * | |
1324 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
1325 | * @param[in] buffers Which buffer(s) to flush. | |
1326 | * | |
1327 | * @return SP_OK upon success, a negative error code otherwise. | |
1328 | * | |
1329 | * @since 0.1.0 | |
1330 | */ | |
1331 | enum sp_return sp_flush(struct sp_port *port, enum sp_buffer buffers); | |
1332 | ||
1333 | /** | |
1334 | * Wait for buffered data to be transmitted. | |
1335 | * | |
1336 | * @warning If your program runs on Unix, defines its own signal handlers, and | |
1337 | * needs to abort draining the output buffer when when these are | |
1338 | * called, then you should not use this function. It repeats system | |
1339 | * calls that return with EINTR. To be able to abort a drain from a | |
1340 | * signal handler, you would need to implement your own blocking | |
1341 | * drain by polling the result of sp_output_waiting(). | |
1342 | * | |
1343 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
1344 | * | |
1345 | * @return SP_OK upon success, a negative error code otherwise. | |
1346 | * | |
1347 | * @since 0.1.0 | |
1348 | */ | |
1349 | enum sp_return sp_drain(struct sp_port *port); | |
1350 | ||
1351 | /** | |
1352 | * @} | |
1353 | * | |
1354 | * @defgroup Waiting Waiting | |
1355 | * | |
1356 | * Waiting for events and timeout handling. | |
1357 | * | |
1358 | * @{ | |
1359 | */ | |
1360 | ||
1361 | /** | |
1362 | * Allocate storage for a set of events. | |
1363 | * | |
1364 | * The user should allocate a variable of type struct sp_event_set *, | |
1365 | * then pass a pointer to this variable to receive the result. | |
1366 | * | |
1367 | * The result should be freed after use by calling sp_free_event_set(). | |
1368 | * | |
1369 | * @param[out] result_ptr If any error is returned, the variable pointed to by | |
1370 | * result_ptr will be set to NULL. Otherwise, it will | |
1371 | * be set to point to the event set. Must not be NULL. | |
1372 | * | |
1373 | * @return SP_OK upon success, a negative error code otherwise. | |
1374 | * | |
1375 | * @since 0.1.0 | |
1376 | */ | |
1377 | enum sp_return sp_new_event_set(struct sp_event_set **result_ptr); | |
1378 | ||
1379 | /** | |
1380 | * Add events to a struct sp_event_set for a given port. | |
1381 | * | |
1382 | * The port must first be opened by calling sp_open() using the same port | |
1383 | * structure. | |
1384 | * | |
1385 | * After the port is closed or the port structure freed, the results may | |
1386 | * no longer be valid. | |
1387 | * | |
1388 | * @param[in,out] event_set Event set to update. Must not be NULL. | |
1389 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
1390 | * @param[in] mask Bitmask of events to be waited for. | |
1391 | * | |
1392 | * @return SP_OK upon success, a negative error code otherwise. | |
1393 | * | |
1394 | * @since 0.1.0 | |
1395 | */ | |
1396 | enum sp_return sp_add_port_events(struct sp_event_set *event_set, | |
1397 | const struct sp_port *port, enum sp_event mask); | |
1398 | ||
1399 | /** | |
1400 | * Wait for any of a set of events to occur. | |
1401 | * | |
1402 | * @param[in] event_set Event set to wait on. Must not be NULL. | |
1403 | * @param[in] timeout_ms Timeout in milliseconds, or zero to wait indefinitely. | |
1404 | * | |
1405 | * @return SP_OK upon success, a negative error code otherwise. | |
1406 | * | |
1407 | * @since 0.1.0 | |
1408 | */ | |
1409 | enum sp_return sp_wait(struct sp_event_set *event_set, unsigned int timeout_ms); | |
1410 | ||
1411 | /** | |
1412 | * Free a structure allocated by sp_new_event_set(). | |
1413 | * | |
1414 | * @param[in] event_set Event set to free. Must not be NULL. | |
1415 | * | |
1416 | * @since 0.1.0 | |
1417 | */ | |
1418 | void sp_free_event_set(struct sp_event_set *event_set); | |
1419 | ||
1420 | /** | |
1421 | * @} | |
1422 | * | |
1423 | * @defgroup Signals Signals | |
1424 | * | |
1425 | * Port signalling operations. | |
1426 | * | |
1427 | * @{ | |
1428 | */ | |
1429 | ||
1430 | /** | |
1431 | * Gets the status of the control signals for the specified port. | |
1432 | * | |
1433 | * The user should allocate a variable of type "enum sp_signal" and pass a | |
1434 | * pointer to this variable to receive the result. The result is a bitmask | |
1435 | * in which individual signals can be checked by bitwise OR with values of | |
1436 | * the sp_signal enum. | |
1437 | * | |
1438 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
1439 | * @param[out] signal_mask Pointer to a variable to receive the result. | |
1440 | * Must not be NULL. | |
1441 | * | |
1442 | * @return SP_OK upon success, a negative error code otherwise. | |
1443 | * | |
1444 | * @since 0.1.0 | |
1445 | */ | |
1446 | enum sp_return sp_get_signals(struct sp_port *port, enum sp_signal *signal_mask); | |
1447 | ||
1448 | /** | |
1449 | * Put the port transmit line into the break state. | |
1450 | * | |
1451 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
1452 | * | |
1453 | * @return SP_OK upon success, a negative error code otherwise. | |
1454 | * | |
1455 | * @since 0.1.0 | |
1456 | */ | |
1457 | enum sp_return sp_start_break(struct sp_port *port); | |
1458 | ||
1459 | /** | |
1460 | * Take the port transmit line out of the break state. | |
1461 | * | |
1462 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
1463 | * | |
1464 | * @return SP_OK upon success, a negative error code otherwise. | |
1465 | * | |
1466 | * @since 0.1.0 | |
1467 | */ | |
1468 | enum sp_return sp_end_break(struct sp_port *port); | |
1469 | ||
1470 | /** | |
1471 | * @} | |
1472 | * | |
1473 | * @defgroup Errors Errors | |
1474 | * | |
1475 | * Obtaining error information. | |
1476 | * | |
1477 | * @{ | |
1478 | */ | |
1479 | ||
1480 | /** | |
1481 | * Get the error code for a failed operation. | |
1482 | * | |
1483 | * In order to obtain the correct result, this function should be called | |
1484 | * straight after the failure, before executing any other system operations. | |
1485 | * The result is thread-specific, and only valid when called immediately | |
1486 | * after a previous call returning SP_ERR_FAIL. | |
1487 | * | |
1488 | * @return The system's numeric code for the error that caused the last | |
1489 | * operation to fail. | |
1490 | * | |
1491 | * @since 0.1.0 | |
1492 | */ | |
1493 | int sp_last_error_code(void); | |
1494 | ||
1495 | /** | |
1496 | * Get the error message for a failed operation. | |
1497 | * | |
1498 | * In order to obtain the correct result, this function should be called | |
1499 | * straight after the failure, before executing other system operations. | |
1500 | * The result is thread-specific, and only valid when called immediately | |
1501 | * after a previous call returning SP_ERR_FAIL. | |
1502 | * | |
1503 | * @return The system's message for the error that caused the last | |
1504 | * operation to fail. This string may be allocated by the function, | |
1505 | * and should be freed after use by calling sp_free_error_message(). | |
1506 | * | |
1507 | * @since 0.1.0 | |
1508 | */ | |
1509 | char *sp_last_error_message(void); | |
1510 | ||
1511 | /** | |
1512 | * Free an error message returned by sp_last_error_message(). | |
1513 | * | |
1514 | * @param[in] message The error message string to free. Must not be NULL. | |
1515 | * | |
1516 | * @since 0.1.0 | |
1517 | */ | |
1518 | void sp_free_error_message(char *message); | |
1519 | ||
1520 | /** | |
1521 | * Set the handler function for library debugging messages. | |
1522 | * | |
1523 | * Debugging messages are generated by the library during each operation, | |
1524 | * to help in diagnosing problems. The handler will be called for each | |
1525 | * message. The handler can be set to NULL to ignore all debug messages. | |
1526 | * | |
1527 | * The handler function should accept a format string and variable length | |
1528 | * argument list, in the same manner as e.g. printf(). | |
1529 | * | |
1530 | * The default handler is sp_default_debug_handler(). | |
1531 | * | |
1532 | * @param[in] handler The handler function to use. Can be NULL (in that case | |
1533 | * all debug messages will be ignored). | |
1534 | * | |
1535 | * @since 0.1.0 | |
1536 | */ | |
1537 | void sp_set_debug_handler(void (*handler)(const char *format, ...)); | |
1538 | ||
1539 | /** | |
1540 | * Default handler function for library debugging messages. | |
1541 | * | |
1542 | * This function prints debug messages to the standard error stream if the | |
1543 | * environment variable LIBSERIALPORT_DEBUG is set. Otherwise, they are | |
1544 | * ignored. | |
1545 | * | |
1546 | * @param[in] format The format string to use. Must not be NULL. | |
1547 | * @param[in] ... The variable length argument list to use. | |
1548 | * | |
1549 | * @since 0.1.0 | |
1550 | */ | |
1551 | void sp_default_debug_handler(const char *format, ...); | |
1552 | ||
1553 | /** @} */ | |
1554 | ||
1555 | /** | |
1556 | * @defgroup Versions Versions | |
1557 | * | |
1558 | * Version number querying functions, definitions, and macros. | |
1559 | * | |
1560 | * This set of API calls returns two different version numbers related | |
1561 | * to libserialport. The "package version" is the release version number of the | |
1562 | * libserialport tarball in the usual "major.minor.micro" format, e.g. "0.1.0". | |
1563 | * | |
1564 | * The "library version" is independent of that; it is the libtool version | |
1565 | * number in the "current:revision:age" format, e.g. "2:0:0". | |
1566 | * See http://www.gnu.org/software/libtool/manual/libtool.html#Libtool-versioning for details. | |
1567 | * | |
1568 | * Both version numbers (and/or individual components of them) can be | |
1569 | * retrieved via the API calls at runtime, and/or they can be checked at | |
1570 | * compile/preprocessor time using the respective macros. | |
1571 | * | |
1572 | * @{ | |
1573 | */ | |
1574 | ||
1575 | /* | |
1576 | * Package version macros (can be used for conditional compilation). | |
1577 | */ | |
1578 | ||
1579 | /** The libserialport package 'major' version number. */ | |
1580 | #define SP_PACKAGE_VERSION_MAJOR @SP_PACKAGE_VERSION_MAJOR@ | |
1581 | ||
1582 | /** The libserialport package 'minor' version number. */ | |
1583 | #define SP_PACKAGE_VERSION_MINOR @SP_PACKAGE_VERSION_MINOR@ | |
1584 | ||
1585 | /** The libserialport package 'micro' version number. */ | |
1586 | #define SP_PACKAGE_VERSION_MICRO @SP_PACKAGE_VERSION_MICRO@ | |
1587 | ||
1588 | /** The libserialport package version ("major.minor.micro") as string. */ | |
1589 | #define SP_PACKAGE_VERSION_STRING "@SP_PACKAGE_VERSION@" | |
1590 | ||
1591 | /* | |
1592 | * Library/libtool version macros (can be used for conditional compilation). | |
1593 | */ | |
1594 | ||
1595 | /** The libserialport libtool 'current' version number. */ | |
1596 | #define SP_LIB_VERSION_CURRENT @SP_LIB_VERSION_CURRENT@ | |
1597 | ||
1598 | /** The libserialport libtool 'revision' version number. */ | |
1599 | #define SP_LIB_VERSION_REVISION @SP_LIB_VERSION_REVISION@ | |
1600 | ||
1601 | /** The libserialport libtool 'age' version number. */ | |
1602 | #define SP_LIB_VERSION_AGE @SP_LIB_VERSION_AGE@ | |
1603 | ||
1604 | /** The libserialport libtool version ("current:revision:age") as string. */ | |
1605 | #define SP_LIB_VERSION_STRING "@SP_LIB_VERSION@" | |
1606 | ||
1607 | /** | |
1608 | * Get the major libserialport package version number. | |
1609 | * | |
1610 | * @return The major package version number. | |
1611 | * | |
1612 | * @since 0.1.0 | |
1613 | */ | |
1614 | int sp_get_major_package_version(void); | |
1615 | ||
1616 | /** | |
1617 | * Get the minor libserialport package version number. | |
1618 | * | |
1619 | * @return The minor package version number. | |
1620 | * | |
1621 | * @since 0.1.0 | |
1622 | */ | |
1623 | int sp_get_minor_package_version(void); | |
1624 | ||
1625 | /** | |
1626 | * Get the micro libserialport package version number. | |
1627 | * | |
1628 | * @return The micro package version number. | |
1629 | * | |
1630 | * @since 0.1.0 | |
1631 | */ | |
1632 | int sp_get_micro_package_version(void); | |
1633 | ||
1634 | /** | |
1635 | * Get the libserialport package version number as a string. | |
1636 | * | |
1637 | * @return The package version number string. The returned string is | |
1638 | * static and thus should NOT be free'd by the caller. | |
1639 | * | |
1640 | * @since 0.1.0 | |
1641 | */ | |
1642 | const char *sp_get_package_version_string(void); | |
1643 | ||
1644 | /** | |
1645 | * Get the "current" part of the libserialport library version number. | |
1646 | * | |
1647 | * @return The "current" library version number. | |
1648 | * | |
1649 | * @since 0.1.0 | |
1650 | */ | |
1651 | int sp_get_current_lib_version(void); | |
1652 | ||
1653 | /** | |
1654 | * Get the "revision" part of the libserialport library version number. | |
1655 | * | |
1656 | * @return The "revision" library version number. | |
1657 | * | |
1658 | * @since 0.1.0 | |
1659 | */ | |
1660 | int sp_get_revision_lib_version(void); | |
1661 | ||
1662 | /** | |
1663 | * Get the "age" part of the libserialport library version number. | |
1664 | * | |
1665 | * @return The "age" library version number. | |
1666 | * | |
1667 | * @since 0.1.0 | |
1668 | */ | |
1669 | int sp_get_age_lib_version(void); | |
1670 | ||
1671 | /** | |
1672 | * Get the libserialport library version number as a string. | |
1673 | * | |
1674 | * @return The library version number string. The returned string is | |
1675 | * static and thus should NOT be free'd by the caller. | |
1676 | * | |
1677 | * @since 0.1.0 | |
1678 | */ | |
1679 | const char *sp_get_lib_version_string(void); | |
1680 | ||
1681 | /** @} */ | |
1682 | ||
1683 | #ifdef __cplusplus | |
1684 | } | |
1685 | #endif | |
1686 | ||
1687 | #endif |