]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2010-2012 Bert Vermeulen <bert@biot.com> | |
5 | * | |
6 | * This program is free software: you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation, either version 3 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
18 | */ | |
19 | ||
20 | #include "protocol.h" | |
21 | ||
22 | #define VENDOR_NAME "ZEROPLUS" | |
23 | #define USB_INTERFACE 0 | |
24 | #define USB_CONFIGURATION 1 | |
25 | #define NUM_TRIGGER_STAGES 4 | |
26 | #define TRIGGER_TYPE "01" | |
27 | #define PACKET_SIZE 2048 /* ?? */ | |
28 | ||
29 | //#define ZP_EXPERIMENTAL | |
30 | ||
31 | struct zp_model { | |
32 | uint16_t vid; | |
33 | uint16_t pid; | |
34 | char *model_name; | |
35 | unsigned int channels; | |
36 | unsigned int sample_depth; /* In Ksamples/channel */ | |
37 | unsigned int max_sampling_freq; | |
38 | }; | |
39 | ||
40 | /* | |
41 | * Note -- 16032, 16064 and 16128 *usually* -- but not always -- have the | |
42 | * same 128K sample depth. | |
43 | */ | |
44 | static const struct zp_model zeroplus_models[] = { | |
45 | {0x0c12, 0x7002, "LAP-16128U", 16, 128, 200}, | |
46 | {0x0c12, 0x7009, "LAP-C(16064)", 16, 64, 100}, | |
47 | {0x0c12, 0x700a, "LAP-C(16128)", 16, 128, 200}, | |
48 | /* TODO: We don't know anything about these. | |
49 | {0x0c12, 0x700b, "LAP-C(32128)", 32, 128, 200}, | |
50 | {0x0c12, 0x700c, "LAP-C(321000)", 32, 1024, 200}, | |
51 | {0x0c12, 0x700d, "LAP-C(322000)", 32, 2048, 200}, | |
52 | */ | |
53 | {0x0c12, 0x700e, "LAP-C(16032)", 16, 32, 100}, | |
54 | {0x0c12, 0x7016, "LAP-C(162000)", 16, 2048, 200}, | |
55 | { 0, 0, 0, 0, 0, 0 } | |
56 | }; | |
57 | ||
58 | static const int32_t hwcaps[] = { | |
59 | SR_CONF_LOGIC_ANALYZER, | |
60 | SR_CONF_SAMPLERATE, | |
61 | SR_CONF_CAPTURE_RATIO, | |
62 | SR_CONF_LIMIT_SAMPLES, | |
63 | }; | |
64 | ||
65 | /* | |
66 | * ZEROPLUS LAP-C (16032) numbers the 16 probes A0-A7 and B0-B7. | |
67 | * We currently ignore other untested/unsupported devices here. | |
68 | */ | |
69 | static const char *probe_names[] = { | |
70 | "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", | |
71 | "B0", "B1", "B2", "B3", "B4", "B5", "B6", "B7", | |
72 | NULL, | |
73 | }; | |
74 | ||
75 | SR_PRIV struct sr_dev_driver zeroplus_logic_cube_driver_info; | |
76 | static struct sr_dev_driver *di = &zeroplus_logic_cube_driver_info; | |
77 | ||
78 | /* | |
79 | * The hardware supports more samplerates than these, but these are the | |
80 | * options hardcoded into the vendor's Windows GUI. | |
81 | */ | |
82 | ||
83 | static const uint64_t samplerates_100[] = { | |
84 | SR_HZ(100), | |
85 | SR_HZ(500), | |
86 | SR_KHZ(1), | |
87 | SR_KHZ(5), | |
88 | SR_KHZ(25), | |
89 | SR_KHZ(50), | |
90 | SR_KHZ(100), | |
91 | SR_KHZ(200), | |
92 | SR_KHZ(400), | |
93 | SR_KHZ(800), | |
94 | SR_MHZ(1), | |
95 | SR_MHZ(10), | |
96 | SR_MHZ(25), | |
97 | SR_MHZ(50), | |
98 | SR_MHZ(80), | |
99 | SR_MHZ(100), | |
100 | }; | |
101 | ||
102 | const uint64_t samplerates_200[] = { | |
103 | SR_HZ(100), | |
104 | SR_HZ(500), | |
105 | SR_KHZ(1), | |
106 | SR_KHZ(5), | |
107 | SR_KHZ(25), | |
108 | SR_KHZ(50), | |
109 | SR_KHZ(100), | |
110 | SR_KHZ(200), | |
111 | SR_KHZ(400), | |
112 | SR_KHZ(800), | |
113 | SR_MHZ(1), | |
114 | SR_MHZ(10), | |
115 | SR_MHZ(25), | |
116 | SR_MHZ(50), | |
117 | SR_MHZ(80), | |
118 | SR_MHZ(100), | |
119 | SR_MHZ(150), | |
120 | SR_MHZ(200), | |
121 | }; | |
122 | ||
123 | static int hw_dev_close(struct sr_dev_inst *sdi); | |
124 | ||
125 | #if 0 | |
126 | static int configure_probes(const struct sr_dev_inst *sdi) | |
127 | { | |
128 | struct dev_context *devc; | |
129 | const struct sr_probe *probe; | |
130 | const GSList *l; | |
131 | int probe_bit, stage, i; | |
132 | char *tc; | |
133 | ||
134 | /* Note: sdi and sdi->priv are non-NULL, the caller checked this. */ | |
135 | devc = sdi->priv; | |
136 | ||
137 | devc->probe_mask = 0; | |
138 | for (i = 0; i < NUM_TRIGGER_STAGES; i++) { | |
139 | devc->trigger_mask[i] = 0; | |
140 | devc->trigger_value[i] = 0; | |
141 | } | |
142 | ||
143 | stage = -1; | |
144 | for (l = sdi->probes; l; l = l->next) { | |
145 | probe = (struct sr_probe *)l->data; | |
146 | if (probe->enabled == FALSE) | |
147 | continue; | |
148 | probe_bit = 1 << (probe->index); | |
149 | devc->probe_mask |= probe_bit; | |
150 | ||
151 | if (probe->trigger) { | |
152 | stage = 0; | |
153 | for (tc = probe->trigger; *tc; tc++) { | |
154 | devc->trigger_mask[stage] |= probe_bit; | |
155 | if (*tc == '1') | |
156 | devc->trigger_value[stage] |= probe_bit; | |
157 | stage++; | |
158 | if (stage > NUM_TRIGGER_STAGES) | |
159 | return SR_ERR; | |
160 | } | |
161 | } | |
162 | } | |
163 | ||
164 | return SR_OK; | |
165 | } | |
166 | #endif | |
167 | ||
168 | static int configure_probes(const struct sr_dev_inst *sdi) | |
169 | { | |
170 | struct dev_context *devc; | |
171 | const GSList *l; | |
172 | const struct sr_probe *probe; | |
173 | char *tc; | |
174 | int type; | |
175 | ||
176 | /* Note: sdi and sdi->priv are non-NULL, the caller checked this. */ | |
177 | devc = sdi->priv; | |
178 | ||
179 | for (l = sdi->probes; l; l = l->next) { | |
180 | probe = (struct sr_probe *)l->data; | |
181 | if (probe->enabled == FALSE) | |
182 | continue; | |
183 | ||
184 | if ((tc = probe->trigger)) { | |
185 | switch (*tc) { | |
186 | case '1': | |
187 | type = TRIGGER_HIGH; | |
188 | break; | |
189 | case '0': | |
190 | type = TRIGGER_LOW; | |
191 | break; | |
192 | #if 0 | |
193 | case 'r': | |
194 | type = TRIGGER_POSEDGE; | |
195 | break; | |
196 | case 'f': | |
197 | type = TRIGGER_NEGEDGE; | |
198 | break; | |
199 | case 'c': | |
200 | type = TRIGGER_ANYEDGE; | |
201 | break; | |
202 | #endif | |
203 | default: | |
204 | return SR_ERR; | |
205 | } | |
206 | analyzer_add_trigger(probe->index, type); | |
207 | devc->trigger = 1; | |
208 | } | |
209 | } | |
210 | ||
211 | return SR_OK; | |
212 | } | |
213 | ||
214 | SR_PRIV int zp_set_samplerate(struct dev_context *devc, uint64_t samplerate) | |
215 | { | |
216 | int i; | |
217 | ||
218 | for (i = 0; ARRAY_SIZE(samplerates_200); i++) | |
219 | if (samplerate == samplerates_200[i]) | |
220 | break; | |
221 | ||
222 | if (i == ARRAY_SIZE(samplerates_200) || samplerate > devc->max_samplerate) { | |
223 | sr_err("Unsupported samplerate: %" PRIu64 "Hz.", samplerate); | |
224 | return SR_ERR_ARG; | |
225 | } | |
226 | ||
227 | sr_info("Setting samplerate to %" PRIu64 "Hz.", samplerate); | |
228 | ||
229 | if (samplerate >= SR_MHZ(1)) | |
230 | analyzer_set_freq(samplerate / SR_MHZ(1), FREQ_SCALE_MHZ); | |
231 | else if (samplerate >= SR_KHZ(1)) | |
232 | analyzer_set_freq(samplerate / SR_KHZ(1), FREQ_SCALE_KHZ); | |
233 | else | |
234 | analyzer_set_freq(samplerate, FREQ_SCALE_HZ); | |
235 | ||
236 | devc->cur_samplerate = samplerate; | |
237 | ||
238 | return SR_OK; | |
239 | } | |
240 | ||
241 | static int clear_instances(void) | |
242 | { | |
243 | GSList *l; | |
244 | struct sr_dev_inst *sdi; | |
245 | struct drv_context *drvc; | |
246 | struct dev_context *devc; | |
247 | struct sr_usb_dev_inst *usb; | |
248 | ||
249 | drvc = di->priv; | |
250 | for (l = drvc->instances; l; l = l->next) { | |
251 | sdi = l->data; | |
252 | if (!(devc = sdi->priv)) { | |
253 | /* Log error, but continue cleaning up the rest. */ | |
254 | sr_err("%s: sdi->priv was NULL, continuing", __func__); | |
255 | continue; | |
256 | } | |
257 | usb = sdi->conn; | |
258 | sr_usb_dev_inst_free(usb); | |
259 | /* Properly close all devices... */ | |
260 | hw_dev_close(sdi); | |
261 | /* ...and free all their memory. */ | |
262 | sr_dev_inst_free(sdi); | |
263 | } | |
264 | g_slist_free(drvc->instances); | |
265 | drvc->instances = NULL; | |
266 | ||
267 | return SR_OK; | |
268 | } | |
269 | ||
270 | static int hw_init(struct sr_context *sr_ctx) | |
271 | { | |
272 | return std_hw_init(sr_ctx, di, "zeroplus: "); | |
273 | } | |
274 | ||
275 | static GSList *hw_scan(GSList *options) | |
276 | { | |
277 | struct sr_dev_inst *sdi; | |
278 | struct sr_probe *probe; | |
279 | struct drv_context *drvc; | |
280 | struct dev_context *devc; | |
281 | const struct zp_model *prof; | |
282 | struct libusb_device_descriptor des; | |
283 | libusb_device **devlist; | |
284 | GSList *devices; | |
285 | int ret, devcnt, i, j; | |
286 | ||
287 | (void)options; | |
288 | ||
289 | drvc = di->priv; | |
290 | ||
291 | devices = NULL; | |
292 | ||
293 | /* Find all ZEROPLUS analyzers and add them to device list. */ | |
294 | devcnt = 0; | |
295 | libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist); /* TODO: Errors. */ | |
296 | ||
297 | for (i = 0; devlist[i]; i++) { | |
298 | ret = libusb_get_device_descriptor(devlist[i], &des); | |
299 | if (ret != 0) { | |
300 | sr_err("Failed to get device descriptor: %s.", | |
301 | libusb_error_name(ret)); | |
302 | continue; | |
303 | } | |
304 | ||
305 | prof = NULL; | |
306 | for (j = 0; j < zeroplus_models[j].vid; j++) { | |
307 | if (des.idVendor == zeroplus_models[j].vid && | |
308 | des.idProduct == zeroplus_models[j].pid) { | |
309 | prof = &zeroplus_models[j]; | |
310 | } | |
311 | } | |
312 | /* Skip if the device was not found. */ | |
313 | if (!prof) | |
314 | continue; | |
315 | sr_info("Found ZEROPLUS %s.", prof->model_name); | |
316 | ||
317 | /* Register the device with libsigrok. */ | |
318 | if (!(sdi = sr_dev_inst_new(devcnt, SR_ST_INACTIVE, | |
319 | VENDOR_NAME, prof->model_name, NULL))) { | |
320 | sr_err("%s: sr_dev_inst_new failed", __func__); | |
321 | return NULL; | |
322 | } | |
323 | sdi->driver = di; | |
324 | ||
325 | /* Allocate memory for our private driver context. */ | |
326 | if (!(devc = g_try_malloc0(sizeof(struct dev_context)))) { | |
327 | sr_err("Device context malloc failed."); | |
328 | return NULL; | |
329 | } | |
330 | ||
331 | sdi->priv = devc; | |
332 | devc->prof = prof; | |
333 | devc->num_channels = prof->channels; | |
334 | #ifdef ZP_EXPERIMENTAL | |
335 | devc->max_memory_size = 128 * 1024; | |
336 | devc->max_samplerate = 200; | |
337 | #else | |
338 | devc->max_memory_size = prof->sample_depth * 1024; | |
339 | devc->max_samplerate = prof->max_sampling_freq; | |
340 | #endif | |
341 | devc->max_samplerate *= SR_MHZ(1); | |
342 | devc->memory_size = MEMORY_SIZE_8K; | |
343 | // memset(devc->trigger_buffer, 0, NUM_TRIGGER_STAGES); | |
344 | ||
345 | /* Fill in probelist according to this device's profile. */ | |
346 | for (j = 0; j < devc->num_channels; j++) { | |
347 | if (!(probe = sr_probe_new(j, SR_PROBE_LOGIC, TRUE, | |
348 | probe_names[j]))) | |
349 | return NULL; | |
350 | sdi->probes = g_slist_append(sdi->probes, probe); | |
351 | } | |
352 | ||
353 | devices = g_slist_append(devices, sdi); | |
354 | drvc->instances = g_slist_append(drvc->instances, sdi); | |
355 | sdi->conn = sr_usb_dev_inst_new( | |
356 | libusb_get_bus_number(devlist[i]), | |
357 | libusb_get_device_address(devlist[i]), NULL); | |
358 | devcnt++; | |
359 | ||
360 | } | |
361 | libusb_free_device_list(devlist, 1); | |
362 | ||
363 | return devices; | |
364 | } | |
365 | ||
366 | static GSList *hw_dev_list(void) | |
367 | { | |
368 | return ((struct drv_context *)(di->priv))->instances; | |
369 | } | |
370 | ||
371 | static int hw_dev_open(struct sr_dev_inst *sdi) | |
372 | { | |
373 | struct dev_context *devc; | |
374 | struct drv_context *drvc; | |
375 | struct sr_usb_dev_inst *usb; | |
376 | libusb_device **devlist, *dev; | |
377 | struct libusb_device_descriptor des; | |
378 | int device_count, ret, i; | |
379 | ||
380 | drvc = di->priv; | |
381 | usb = sdi->conn; | |
382 | ||
383 | if (!(devc = sdi->priv)) { | |
384 | sr_err("%s: sdi->priv was NULL", __func__); | |
385 | return SR_ERR_ARG; | |
386 | } | |
387 | ||
388 | device_count = libusb_get_device_list(drvc->sr_ctx->libusb_ctx, | |
389 | &devlist); | |
390 | if (device_count < 0) { | |
391 | sr_err("Failed to retrieve device list."); | |
392 | return SR_ERR; | |
393 | } | |
394 | ||
395 | dev = NULL; | |
396 | for (i = 0; i < device_count; i++) { | |
397 | if ((ret = libusb_get_device_descriptor(devlist[i], &des))) { | |
398 | sr_err("Failed to get device descriptor: %s.", | |
399 | libusb_error_name(ret)); | |
400 | continue; | |
401 | } | |
402 | if (libusb_get_bus_number(devlist[i]) == usb->bus | |
403 | && libusb_get_device_address(devlist[i]) == usb->address) { | |
404 | dev = devlist[i]; | |
405 | break; | |
406 | } | |
407 | } | |
408 | if (!dev) { | |
409 | sr_err("Device on bus %d address %d disappeared!", | |
410 | usb->bus, usb->address); | |
411 | return SR_ERR; | |
412 | } | |
413 | ||
414 | if (!(ret = libusb_open(dev, &(usb->devhdl)))) { | |
415 | sdi->status = SR_ST_ACTIVE; | |
416 | sr_info("Opened device %d on %d.%d interface %d.", | |
417 | sdi->index, usb->bus, usb->address, USB_INTERFACE); | |
418 | } else { | |
419 | sr_err("Failed to open device: %s.", libusb_error_name(ret)); | |
420 | return SR_ERR; | |
421 | } | |
422 | ||
423 | ret = libusb_set_configuration(usb->devhdl, USB_CONFIGURATION); | |
424 | if (ret < 0) { | |
425 | sr_err("Unable to set USB configuration %d: %s.", | |
426 | USB_CONFIGURATION, libusb_error_name(ret)); | |
427 | return SR_ERR; | |
428 | } | |
429 | ||
430 | ret = libusb_claim_interface(usb->devhdl, USB_INTERFACE); | |
431 | if (ret != 0) { | |
432 | sr_err("Unable to claim interface: %s.", | |
433 | libusb_error_name(ret)); | |
434 | return SR_ERR; | |
435 | } | |
436 | ||
437 | /* Set default configuration after power on. */ | |
438 | if (analyzer_read_status(usb->devhdl) == 0) | |
439 | analyzer_configure(usb->devhdl); | |
440 | ||
441 | analyzer_reset(usb->devhdl); | |
442 | analyzer_initialize(usb->devhdl); | |
443 | ||
444 | //analyzer_set_memory_size(MEMORY_SIZE_512K); | |
445 | // analyzer_set_freq(g_freq, g_freq_scale); | |
446 | analyzer_set_trigger_count(1); | |
447 | // analyzer_set_ramsize_trigger_address((((100 - g_pre_trigger) | |
448 | // * get_memory_size(g_memory_size)) / 100) >> 2); | |
449 | ||
450 | #if 0 | |
451 | if (g_double_mode == 1) | |
452 | analyzer_set_compression(COMPRESSION_DOUBLE); | |
453 | else if (g_compression == 1) | |
454 | analyzer_set_compression(COMPRESSION_ENABLE); | |
455 | else | |
456 | #endif | |
457 | analyzer_set_compression(COMPRESSION_NONE); | |
458 | ||
459 | if (devc->cur_samplerate == 0) { | |
460 | /* Samplerate hasn't been set. Default to 1MHz. */ | |
461 | analyzer_set_freq(1, FREQ_SCALE_MHZ); | |
462 | devc->cur_samplerate = SR_MHZ(1); | |
463 | } | |
464 | ||
465 | return SR_OK; | |
466 | } | |
467 | ||
468 | static int hw_dev_close(struct sr_dev_inst *sdi) | |
469 | { | |
470 | struct sr_usb_dev_inst *usb; | |
471 | ||
472 | usb = sdi->conn; | |
473 | ||
474 | if (!usb->devhdl) | |
475 | return SR_ERR; | |
476 | ||
477 | sr_info("Closing device %d on %d.%d interface %d.", sdi->index, | |
478 | usb->bus, usb->address, USB_INTERFACE); | |
479 | libusb_release_interface(usb->devhdl, USB_INTERFACE); | |
480 | libusb_reset_device(usb->devhdl); | |
481 | libusb_close(usb->devhdl); | |
482 | usb->devhdl = NULL; | |
483 | sdi->status = SR_ST_INACTIVE; | |
484 | ||
485 | return SR_OK; | |
486 | } | |
487 | ||
488 | static int hw_cleanup(void) | |
489 | { | |
490 | struct drv_context *drvc; | |
491 | ||
492 | if (!(drvc = di->priv)) | |
493 | return SR_OK; | |
494 | ||
495 | clear_instances(); | |
496 | ||
497 | return SR_OK; | |
498 | } | |
499 | ||
500 | static int config_get(int id, GVariant **data, const struct sr_dev_inst *sdi) | |
501 | { | |
502 | struct dev_context *devc; | |
503 | ||
504 | switch (id) { | |
505 | case SR_CONF_SAMPLERATE: | |
506 | if (sdi) { | |
507 | devc = sdi->priv; | |
508 | *data = g_variant_new_uint64(devc->cur_samplerate); | |
509 | sr_spew("Returning samplerate: %" PRIu64 "Hz.", | |
510 | devc->cur_samplerate); | |
511 | } else | |
512 | return SR_ERR; | |
513 | break; | |
514 | default: | |
515 | return SR_ERR_NA; | |
516 | } | |
517 | ||
518 | return SR_OK; | |
519 | } | |
520 | ||
521 | static int config_set(int id, GVariant *data, const struct sr_dev_inst *sdi) | |
522 | { | |
523 | struct dev_context *devc; | |
524 | ||
525 | if (sdi->status != SR_ST_ACTIVE) | |
526 | return SR_ERR_DEV_CLOSED; | |
527 | ||
528 | if (!(devc = sdi->priv)) { | |
529 | sr_err("%s: sdi->priv was NULL", __func__); | |
530 | return SR_ERR_ARG; | |
531 | } | |
532 | ||
533 | switch (id) { | |
534 | case SR_CONF_SAMPLERATE: | |
535 | return zp_set_samplerate(devc, g_variant_get_uint64(data)); | |
536 | case SR_CONF_LIMIT_SAMPLES: | |
537 | return set_limit_samples(devc, g_variant_get_uint64(data)); | |
538 | case SR_CONF_CAPTURE_RATIO: | |
539 | return set_capture_ratio(devc, g_variant_get_uint64(data)); | |
540 | default: | |
541 | return SR_ERR_NA; | |
542 | } | |
543 | ||
544 | return SR_OK; | |
545 | } | |
546 | ||
547 | static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi) | |
548 | { | |
549 | struct dev_context *devc; | |
550 | GVariant *gvar; | |
551 | GVariantBuilder gvb; | |
552 | ||
553 | switch (key) { | |
554 | case SR_CONF_DEVICE_OPTIONS: | |
555 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32, | |
556 | hwcaps, ARRAY_SIZE(hwcaps), sizeof(int32_t)); | |
557 | break; | |
558 | case SR_CONF_SAMPLERATE: | |
559 | devc = sdi->priv; | |
560 | g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}")); | |
561 | if (devc->prof->max_sampling_freq == 100) { | |
562 | gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), | |
563 | samplerates_100, ARRAY_SIZE(samplerates_100), | |
564 | sizeof(uint64_t)); | |
565 | } else if (devc->prof->max_sampling_freq == 200) { | |
566 | gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), | |
567 | samplerates_200, ARRAY_SIZE(samplerates_200), | |
568 | sizeof(uint64_t)); | |
569 | } else { | |
570 | sr_err("Internal error: Unknown max. samplerate: %d.", | |
571 | devc->prof->max_sampling_freq); | |
572 | return SR_ERR_ARG; | |
573 | } | |
574 | g_variant_builder_add(&gvb, "{sv}", "samplerates", gvar); | |
575 | *data = g_variant_builder_end(&gvb); | |
576 | break; | |
577 | case SR_CONF_TRIGGER_TYPE: | |
578 | *data = g_variant_new_string(TRIGGER_TYPE); | |
579 | break; | |
580 | default: | |
581 | return SR_ERR_NA; | |
582 | } | |
583 | ||
584 | return SR_OK; | |
585 | } | |
586 | ||
587 | static int hw_dev_acquisition_start(const struct sr_dev_inst *sdi, | |
588 | void *cb_data) | |
589 | { | |
590 | struct dev_context *devc; | |
591 | struct sr_usb_dev_inst *usb; | |
592 | struct sr_datafeed_packet packet; | |
593 | struct sr_datafeed_logic logic; | |
594 | //uint64_t samples_read; | |
595 | int res; | |
596 | unsigned int packet_num, n; | |
597 | unsigned char *buf; | |
598 | ||
599 | if (sdi->status != SR_ST_ACTIVE) | |
600 | return SR_ERR_DEV_CLOSED; | |
601 | ||
602 | if (!(devc = sdi->priv)) { | |
603 | sr_err("%s: sdi->priv was NULL", __func__); | |
604 | return SR_ERR_ARG; | |
605 | } | |
606 | ||
607 | if (configure_probes(sdi) != SR_OK) { | |
608 | sr_err("Failed to configure probes."); | |
609 | return SR_ERR; | |
610 | } | |
611 | ||
612 | usb = sdi->conn; | |
613 | ||
614 | set_triggerbar(devc); | |
615 | ||
616 | /* Push configured settings to device. */ | |
617 | analyzer_configure(usb->devhdl); | |
618 | ||
619 | analyzer_start(usb->devhdl); | |
620 | sr_info("Waiting for data."); | |
621 | analyzer_wait_data(usb->devhdl); | |
622 | ||
623 | sr_info("Stop address = 0x%x.", | |
624 | analyzer_get_stop_address(usb->devhdl)); | |
625 | sr_info("Now address = 0x%x.", | |
626 | analyzer_get_now_address(usb->devhdl)); | |
627 | sr_info("Trigger address = 0x%x.", | |
628 | analyzer_get_trigger_address(usb->devhdl)); | |
629 | ||
630 | /* Send header packet to the session bus. */ | |
631 | std_session_send_df_header(cb_data, LOG_PREFIX); | |
632 | ||
633 | if (!(buf = g_try_malloc(PACKET_SIZE))) { | |
634 | sr_err("Packet buffer malloc failed."); | |
635 | return SR_ERR_MALLOC; | |
636 | } | |
637 | ||
638 | //samples_read = 0; | |
639 | analyzer_read_start(usb->devhdl); | |
640 | /* Send the incoming transfer to the session bus. */ | |
641 | n = get_memory_size(devc->memory_size); | |
642 | if (devc->max_memory_size * 4 < n) | |
643 | n = devc->max_memory_size * 4; | |
644 | for (packet_num = 0; packet_num < n / PACKET_SIZE; packet_num++) { | |
645 | res = analyzer_read_data(usb->devhdl, buf, PACKET_SIZE); | |
646 | sr_info("Tried to read %d bytes, actually read %d bytes.", | |
647 | PACKET_SIZE, res); | |
648 | ||
649 | packet.type = SR_DF_LOGIC; | |
650 | packet.payload = &logic; | |
651 | logic.length = PACKET_SIZE; | |
652 | logic.unitsize = 4; | |
653 | logic.data = buf; | |
654 | sr_session_send(cb_data, &packet); | |
655 | //samples_read += res / 4; | |
656 | } | |
657 | analyzer_read_stop(usb->devhdl); | |
658 | g_free(buf); | |
659 | ||
660 | packet.type = SR_DF_END; | |
661 | sr_session_send(cb_data, &packet); | |
662 | ||
663 | return SR_OK; | |
664 | } | |
665 | ||
666 | /* TODO: This stops acquisition on ALL devices, ignoring dev_index. */ | |
667 | static int hw_dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data) | |
668 | { | |
669 | struct dev_context *devc; | |
670 | struct sr_usb_dev_inst *usb; | |
671 | struct sr_datafeed_packet packet; | |
672 | ||
673 | packet.type = SR_DF_END; | |
674 | sr_session_send(cb_data, &packet); | |
675 | ||
676 | if (!(devc = sdi->priv)) { | |
677 | sr_err("%s: sdi->priv was NULL", __func__); | |
678 | return SR_ERR_BUG; | |
679 | } | |
680 | ||
681 | usb = sdi->conn; | |
682 | analyzer_reset(usb->devhdl); | |
683 | /* TODO: Need to cancel and free any queued up transfers. */ | |
684 | ||
685 | return SR_OK; | |
686 | } | |
687 | ||
688 | SR_PRIV struct sr_dev_driver zeroplus_logic_cube_driver_info = { | |
689 | .name = "zeroplus-logic-cube", | |
690 | .longname = "ZEROPLUS Logic Cube LAP-C series", | |
691 | .api_version = 1, | |
692 | .init = hw_init, | |
693 | .cleanup = hw_cleanup, | |
694 | .scan = hw_scan, | |
695 | .dev_list = hw_dev_list, | |
696 | .dev_clear = hw_cleanup, | |
697 | .config_get = config_get, | |
698 | .config_set = config_set, | |
699 | .config_list = config_list, | |
700 | .dev_open = hw_dev_open, | |
701 | .dev_close = hw_dev_close, | |
702 | .dev_acquisition_start = hw_dev_acquisition_start, | |
703 | .dev_acquisition_stop = hw_dev_acquisition_stop, | |
704 | .priv = NULL, | |
705 | }; |