]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * This file is part of the sigrok project. | |
3 | * | |
4 | * Copyright (C) 2010 Bert Vermeulen <bert@biot.com> | |
5 | * | |
6 | * This program is free software: you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation, either version 3 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
18 | */ | |
19 | ||
20 | #include <stdio.h> | |
21 | #include <stdint.h> | |
22 | #include <stdlib.h> | |
23 | #include <sys/types.h> | |
24 | #include <sys/stat.h> | |
25 | #include <fcntl.h> | |
26 | #include <unistd.h> | |
27 | #ifndef _WIN32 | |
28 | #include <termios.h> | |
29 | #endif | |
30 | #include <string.h> | |
31 | #include <sys/time.h> | |
32 | #include <inttypes.h> | |
33 | #ifdef _WIN32 | |
34 | /* TODO */ | |
35 | #else | |
36 | #include <arpa/inet.h> | |
37 | #endif | |
38 | #include <glib.h> | |
39 | #include <sigrok.h> | |
40 | ||
41 | #define NUM_PROBES 32 | |
42 | #define NUM_TRIGGER_STAGES 4 | |
43 | #define TRIGGER_TYPES "01" | |
44 | #define SERIAL_SPEED B115200 | |
45 | #define CLOCK_RATE 100000000 | |
46 | ||
47 | /* Command opcodes */ | |
48 | #define CMD_RESET 0x00 | |
49 | #define CMD_ID 0x02 | |
50 | #define CMD_SET_FLAGS 0x82 | |
51 | #define CMD_SET_DIVIDER 0x80 | |
52 | #define CMD_RUN 0x01 | |
53 | #define CMD_CAPTURE_SIZE 0x81 | |
54 | #define CMD_SET_TRIGGER_MASK_0 0xc0 | |
55 | #define CMD_SET_TRIGGER_MASK_1 0xc4 | |
56 | #define CMD_SET_TRIGGER_MASK_2 0xc8 | |
57 | #define CMD_SET_TRIGGER_MASK_3 0xcc | |
58 | #define CMD_SET_TRIGGER_VALUE_0 0xc1 | |
59 | #define CMD_SET_TRIGGER_VALUE_1 0xc5 | |
60 | #define CMD_SET_TRIGGER_VALUE_2 0xc9 | |
61 | #define CMD_SET_TRIGGER_VALUE_3 0xcd | |
62 | #define CMD_SET_TRIGGER_CONFIG_0 0xc2 | |
63 | #define CMD_SET_TRIGGER_CONFIG_1 0xc6 | |
64 | #define CMD_SET_TRIGGER_CONFIG_2 0xca | |
65 | #define CMD_SET_TRIGGER_CONFIG_3 0xce | |
66 | ||
67 | /* Bitmasks for CMD_FLAGS */ | |
68 | #define FLAG_DEMUX 0x01 | |
69 | #define FLAG_FILTER 0x02 | |
70 | #define FLAG_CHANNELGROUP_1 0x04 | |
71 | #define FLAG_CHANNELGROUP_2 0x08 | |
72 | #define FLAG_CHANNELGROUP_3 0x10 | |
73 | #define FLAG_CHANNELGROUP_4 0x20 | |
74 | #define FLAG_CLOCK_EXTERNAL 0x40 | |
75 | #define FLAG_CLOCK_INVERTED 0x80 | |
76 | #define FLAG_RLE 0x0100 | |
77 | ||
78 | static int capabilities[] = { | |
79 | HWCAP_LOGIC_ANALYZER, | |
80 | HWCAP_SAMPLERATE, | |
81 | HWCAP_CAPTURE_RATIO, | |
82 | HWCAP_LIMIT_SAMPLES, | |
83 | 0, | |
84 | }; | |
85 | ||
86 | static struct samplerates samplerates = { | |
87 | 10, | |
88 | MHZ(200), | |
89 | 1, | |
90 | 0, | |
91 | }; | |
92 | ||
93 | /* List of struct serial_device_instance */ | |
94 | static GSList *device_instances = NULL; | |
95 | ||
96 | /* Current state of the flag register */ | |
97 | static uint32_t flag_reg = 0; | |
98 | ||
99 | static uint64_t cur_samplerate = 0; | |
100 | static uint64_t limit_samples = 0; | |
101 | /* | |
102 | * Pre/post trigger capture ratio, in percentage. | |
103 | * 0 means no pre-trigger data. | |
104 | */ | |
105 | static int capture_ratio = 0; | |
106 | static int trigger_at = -1; | |
107 | static uint32_t probe_mask = 0xffffffff; | |
108 | static uint32_t trigger_mask[4] = { 0, 0, 0, 0 }; | |
109 | static uint32_t trigger_value[4] = { 0, 0, 0, 0 }; | |
110 | static int num_stages = 0; | |
111 | ||
112 | static int send_shortcommand(int fd, uint8_t command) | |
113 | { | |
114 | char buf[1]; | |
115 | ||
116 | g_debug("ols: sending cmd 0x%.2x", command); | |
117 | buf[0] = command; | |
118 | if (write(fd, buf, 1) != 1) | |
119 | return SIGROK_ERR; | |
120 | ||
121 | return SIGROK_OK; | |
122 | } | |
123 | ||
124 | static int send_longcommand(int fd, uint8_t command, uint32_t data) | |
125 | { | |
126 | char buf[5]; | |
127 | ||
128 | g_debug("ols: sending cmd 0x%.2x data 0x%.8x", command, data); | |
129 | buf[0] = command; | |
130 | buf[1] = (data & 0xff000000) >> 24; | |
131 | buf[2] = (data & 0xff0000) >> 16; | |
132 | buf[3] = (data & 0xff00) >> 8; | |
133 | buf[4] = data & 0xff; | |
134 | if (write(fd, buf, 5) != 5) | |
135 | return SIGROK_ERR; | |
136 | ||
137 | return SIGROK_OK; | |
138 | } | |
139 | ||
140 | static int configure_probes(GSList *probes) | |
141 | { | |
142 | struct probe *probe; | |
143 | GSList *l; | |
144 | int probe_bit, stage, i; | |
145 | char *tc; | |
146 | ||
147 | probe_mask = 0; | |
148 | for (i = 0; i < NUM_TRIGGER_STAGES; i++) { | |
149 | trigger_mask[i] = 0; | |
150 | trigger_value[i] = 0; | |
151 | } | |
152 | ||
153 | num_stages = 0; | |
154 | for (l = probes; l; l = l->next) { | |
155 | probe = (struct probe *)l->data; | |
156 | if (!probe->enabled) | |
157 | continue; | |
158 | ||
159 | /* | |
160 | * Set up the probe mask for later configuration into the | |
161 | * flag register. | |
162 | */ | |
163 | probe_bit = 1 << (probe->index - 1); | |
164 | probe_mask |= probe_bit; | |
165 | ||
166 | if (!probe->trigger) | |
167 | continue; | |
168 | ||
169 | /* Configure trigger mask and value. */ | |
170 | stage = 0; | |
171 | for (tc = probe->trigger; tc && *tc; tc++) { | |
172 | trigger_mask[stage] |= probe_bit; | |
173 | if (*tc == '1') | |
174 | trigger_value[stage] |= probe_bit; | |
175 | stage++; | |
176 | if (stage > 3) | |
177 | /* | |
178 | * TODO: Only supporting parallel mode, with | |
179 | * up to 4 stages. | |
180 | */ | |
181 | return SIGROK_ERR; | |
182 | } | |
183 | if (stage > num_stages) | |
184 | num_stages = stage; | |
185 | } | |
186 | ||
187 | return SIGROK_OK; | |
188 | } | |
189 | ||
190 | static uint32_t reverse16(uint32_t in) | |
191 | { | |
192 | uint32_t out; | |
193 | ||
194 | out = (in & 0xff) << 8; | |
195 | out |= (in & 0xff00) >> 8; | |
196 | out |= (in & 0xff0000) << 8; | |
197 | out |= (in & 0xff000000) >> 8; | |
198 | ||
199 | return out; | |
200 | } | |
201 | ||
202 | static uint32_t reverse32(uint32_t in) | |
203 | { | |
204 | uint32_t out; | |
205 | ||
206 | out = (in & 0xff) << 24; | |
207 | out |= (in & 0xff00) << 8; | |
208 | out |= (in & 0xff0000) >> 8; | |
209 | out |= (in & 0xff000000) >> 24; | |
210 | ||
211 | return out; | |
212 | } | |
213 | ||
214 | static int hw_init(char *deviceinfo) | |
215 | { | |
216 | struct sigrok_device_instance *sdi; | |
217 | GSList *ports, *l; | |
218 | GPollFD *fds; | |
219 | int devcnt, final_devcnt, num_ports, fd, ret, i; | |
220 | char buf[8], **device_names, **serial_params; | |
221 | ||
222 | if (deviceinfo) | |
223 | ports = g_slist_append(NULL, strdup(deviceinfo)); | |
224 | else | |
225 | /* No specific device given, so scan all serial ports. */ | |
226 | ports = list_serial_ports(); | |
227 | ||
228 | num_ports = g_slist_length(ports); | |
229 | fds = calloc(1, num_ports * sizeof(GPollFD)); | |
230 | device_names = malloc(num_ports * sizeof(char *)); | |
231 | serial_params = malloc(num_ports * sizeof(char *)); | |
232 | devcnt = 0; | |
233 | for (l = ports; l; l = l->next) { | |
234 | /* The discovery procedure is like this: first send the Reset | |
235 | * command (0x00) 5 times, since the device could be anywhere | |
236 | * in a 5-byte command. Then send the ID command (0x02). | |
237 | * If the device responds with 4 bytes ("OLS1" or "SLA1"), we | |
238 | * have a match. | |
239 | * | |
240 | * Since it may take the device a while to respond at 115Kb/s, | |
241 | * we do all the sending first, then wait for all of them to | |
242 | * respond with g_poll(). | |
243 | */ | |
244 | g_message("ols: probing %s...", (char *)l->data); | |
245 | fd = serial_open(l->data, O_RDWR | O_NONBLOCK); | |
246 | if (fd != -1) { | |
247 | serial_params[devcnt] = serial_backup_params(fd); | |
248 | serial_set_params(fd, 115200, 8, 0, 1, 2); | |
249 | ret = SIGROK_OK; | |
250 | for (i = 0; i < 5; i++) { | |
251 | if ((ret = send_shortcommand(fd, | |
252 | CMD_RESET)) != SIGROK_OK) { | |
253 | /* Serial port is not writable. */ | |
254 | break; | |
255 | } | |
256 | } | |
257 | if (ret != SIGROK_OK) { | |
258 | serial_restore_params(fd, | |
259 | serial_params[devcnt]); | |
260 | serial_close(fd); | |
261 | continue; | |
262 | } | |
263 | send_shortcommand(fd, CMD_ID); | |
264 | fds[devcnt].fd = fd; | |
265 | fds[devcnt].events = G_IO_IN; | |
266 | device_names[devcnt] = strdup(l->data); | |
267 | devcnt++; | |
268 | } | |
269 | free(l->data); | |
270 | } | |
271 | ||
272 | /* 2ms isn't enough for reliable transfer with pl2303, let's try 10 */ | |
273 | usleep(10000); | |
274 | ||
275 | final_devcnt = 0; | |
276 | g_poll(fds, devcnt, 1); | |
277 | for (i = 0; i < devcnt; i++) { | |
278 | if (fds[i].revents == G_IO_IN) { | |
279 | if (read(fds[i].fd, buf, 4) == 4) { | |
280 | if (!strncmp(buf, "1SLO", 4) | |
281 | || !strncmp(buf, "1ALS", 4)) { | |
282 | if (!strncmp(buf, "1SLO", 4)) | |
283 | sdi = sigrok_device_instance_new | |
284 | (final_devcnt, ST_INACTIVE, | |
285 | "Openbench", | |
286 | "Logic Sniffer", "v1.0"); | |
287 | else | |
288 | sdi = sigrok_device_instance_new | |
289 | (final_devcnt, ST_INACTIVE, | |
290 | "Openbench", "Logic Sniffer", | |
291 | "v1.0"); | |
292 | sdi->serial = serial_device_instance_new | |
293 | (device_names[i], -1); | |
294 | device_instances = | |
295 | g_slist_append(device_instances, sdi); | |
296 | final_devcnt++; | |
297 | serial_close(fds[i].fd); | |
298 | fds[i].fd = 0; | |
299 | } | |
300 | } | |
301 | free(device_names[i]); | |
302 | } | |
303 | ||
304 | if (fds[i].fd != 0) { | |
305 | serial_restore_params(fds[i].fd, serial_params[i]); | |
306 | serial_close(fds[i].fd); | |
307 | } | |
308 | free(serial_params[i]); | |
309 | } | |
310 | ||
311 | free(fds); | |
312 | free(device_names); | |
313 | free(serial_params); | |
314 | g_slist_free(ports); | |
315 | ||
316 | cur_samplerate = samplerates.low; | |
317 | ||
318 | return final_devcnt; | |
319 | } | |
320 | ||
321 | static int hw_opendev(int device_index) | |
322 | { | |
323 | struct sigrok_device_instance *sdi; | |
324 | ||
325 | if (!(sdi = get_sigrok_device_instance(device_instances, device_index))) | |
326 | return SIGROK_ERR; | |
327 | ||
328 | sdi->serial->fd = serial_open(sdi->serial->port, O_RDWR); | |
329 | if (sdi->serial->fd == -1) | |
330 | return SIGROK_ERR; | |
331 | ||
332 | sdi->status = ST_ACTIVE; | |
333 | ||
334 | return SIGROK_OK; | |
335 | } | |
336 | ||
337 | static void hw_closedev(int device_index) | |
338 | { | |
339 | struct sigrok_device_instance *sdi; | |
340 | ||
341 | if (!(sdi = get_sigrok_device_instance(device_instances, device_index))) | |
342 | return; | |
343 | ||
344 | if (sdi->serial->fd != -1) { | |
345 | serial_close(sdi->serial->fd); | |
346 | sdi->serial->fd = -1; | |
347 | sdi->status = ST_INACTIVE; | |
348 | } | |
349 | } | |
350 | ||
351 | static void hw_cleanup(void) | |
352 | { | |
353 | GSList *l; | |
354 | struct sigrok_device_instance *sdi; | |
355 | ||
356 | /* Properly close all devices. */ | |
357 | for (l = device_instances; l; l = l->next) { | |
358 | sdi = l->data; | |
359 | if (sdi->serial->fd != -1) | |
360 | serial_close(sdi->serial->fd); | |
361 | sigrok_device_instance_free(sdi); | |
362 | } | |
363 | g_slist_free(device_instances); | |
364 | device_instances = NULL; | |
365 | } | |
366 | ||
367 | static void *hw_get_device_info(int device_index, int device_info_id) | |
368 | { | |
369 | struct sigrok_device_instance *sdi; | |
370 | void *info; | |
371 | ||
372 | if (!(sdi = get_sigrok_device_instance(device_instances, device_index))) | |
373 | return NULL; | |
374 | ||
375 | info = NULL; | |
376 | switch (device_info_id) { | |
377 | case DI_INSTANCE: | |
378 | info = sdi; | |
379 | break; | |
380 | case DI_NUM_PROBES: | |
381 | info = GINT_TO_POINTER(NUM_PROBES); | |
382 | break; | |
383 | case DI_SAMPLERATES: | |
384 | info = &samplerates; | |
385 | break; | |
386 | case DI_TRIGGER_TYPES: | |
387 | info = (char *)TRIGGER_TYPES; | |
388 | break; | |
389 | case DI_CUR_SAMPLERATE: | |
390 | info = &cur_samplerate; | |
391 | break; | |
392 | } | |
393 | ||
394 | return info; | |
395 | } | |
396 | ||
397 | static int hw_get_status(int device_index) | |
398 | { | |
399 | struct sigrok_device_instance *sdi; | |
400 | ||
401 | if (!(sdi = get_sigrok_device_instance(device_instances, device_index))) | |
402 | return ST_NOT_FOUND; | |
403 | ||
404 | return sdi->status; | |
405 | } | |
406 | ||
407 | static int *hw_get_capabilities(void) | |
408 | { | |
409 | return capabilities; | |
410 | } | |
411 | ||
412 | static int set_configuration_samplerate(struct sigrok_device_instance *sdi, | |
413 | uint64_t samplerate) | |
414 | { | |
415 | uint32_t divider; | |
416 | ||
417 | if (samplerate < samplerates.low || samplerate > samplerates.high) | |
418 | return SIGROK_ERR_SAMPLERATE; | |
419 | ||
420 | if (samplerate > CLOCK_RATE) { | |
421 | flag_reg |= FLAG_DEMUX; | |
422 | divider = (CLOCK_RATE * 2 / samplerate) - 1; | |
423 | } else { | |
424 | flag_reg &= ~FLAG_DEMUX; | |
425 | divider = (CLOCK_RATE / samplerate) - 1; | |
426 | } | |
427 | ||
428 | g_message("ols: setting samplerate to %" PRIu64 " Hz (divider %u, demux %s)", | |
429 | samplerate, divider, flag_reg & FLAG_DEMUX ? "on" : "off"); | |
430 | ||
431 | if (send_longcommand(sdi->serial->fd, CMD_SET_DIVIDER, reverse32(divider)) != SIGROK_OK) | |
432 | return SIGROK_ERR; | |
433 | cur_samplerate = samplerate; | |
434 | ||
435 | return SIGROK_OK; | |
436 | } | |
437 | ||
438 | static int hw_set_configuration(int device_index, int capability, void *value) | |
439 | { | |
440 | struct sigrok_device_instance *sdi; | |
441 | int ret; | |
442 | uint64_t *tmp_u64; | |
443 | ||
444 | if (!(sdi = get_sigrok_device_instance(device_instances, device_index))) | |
445 | return SIGROK_ERR; | |
446 | ||
447 | if (sdi->status != ST_ACTIVE) | |
448 | return SIGROK_ERR; | |
449 | ||
450 | switch (capability) { | |
451 | case HWCAP_SAMPLERATE: | |
452 | tmp_u64 = value; | |
453 | ret = set_configuration_samplerate(sdi, *tmp_u64); | |
454 | break; | |
455 | case HWCAP_PROBECONFIG: | |
456 | ret = configure_probes((GSList *) value); | |
457 | break; | |
458 | case HWCAP_LIMIT_SAMPLES: | |
459 | tmp_u64 = value; | |
460 | limit_samples = *tmp_u64; | |
461 | g_message("ols: sample limit %" PRIu64, limit_samples); | |
462 | ret = SIGROK_OK; | |
463 | break; | |
464 | case HWCAP_CAPTURE_RATIO: | |
465 | tmp_u64 = value; | |
466 | capture_ratio = *tmp_u64; | |
467 | if (capture_ratio < 0 || capture_ratio > 100) { | |
468 | capture_ratio = 0; | |
469 | ret = SIGROK_ERR; | |
470 | } else | |
471 | ret = SIGROK_OK; | |
472 | break; | |
473 | default: | |
474 | ret = SIGROK_ERR; | |
475 | } | |
476 | ||
477 | return ret; | |
478 | } | |
479 | ||
480 | static int receive_data(int fd, int revents, void *user_data) | |
481 | { | |
482 | static unsigned int num_transfers = 0; | |
483 | static int num_bytes = 0; | |
484 | static char last_sample[4] = { 0xff, 0xff, 0xff, 0xff }; | |
485 | static unsigned char sample[4] = { 0, 0, 0, 0 }; | |
486 | static unsigned char tmp_sample[4]; | |
487 | static unsigned char *raw_sample_buf = NULL; | |
488 | int count, buflen, num_channels, offset, i, j; | |
489 | struct datafeed_packet packet; | |
490 | unsigned char byte, *buffer; | |
491 | ||
492 | if (num_transfers++ == 0) { | |
493 | /* | |
494 | * First time round, means the device started sending data, | |
495 | * and will not stop until done. If it stops sending for | |
496 | * longer than it takes to send a byte, that means it's | |
497 | * finished. We'll double that to 30ms to be sure... | |
498 | */ | |
499 | source_remove(fd); | |
500 | source_add(fd, G_IO_IN, 30, receive_data, user_data); | |
501 | raw_sample_buf = malloc(limit_samples * 4); | |
502 | /* fill with 1010... for debugging */ | |
503 | memset(raw_sample_buf, 0x82, limit_samples * 4); | |
504 | } | |
505 | ||
506 | num_channels = 0; | |
507 | for (i = 0x20; i > 0x02; i /= 2) { | |
508 | if ((flag_reg & i) == 0) | |
509 | num_channels++; | |
510 | } | |
511 | ||
512 | if (revents == G_IO_IN | |
513 | && num_transfers / num_channels <= limit_samples) { | |
514 | if (read(fd, &byte, 1) != 1) | |
515 | return FALSE; | |
516 | ||
517 | sample[num_bytes++] = byte; | |
518 | g_debug("ols: received byte 0x%.2x", byte); | |
519 | if (num_bytes == num_channels) { | |
520 | g_debug("ols: received sample 0x%.*x", num_bytes * 2, (int) *sample); | |
521 | /* Got a full sample. */ | |
522 | if (flag_reg & FLAG_RLE) { | |
523 | /* | |
524 | * In RLE mode -1 should never come in as a | |
525 | * sample, because bit 31 is the "count" flag. | |
526 | * TODO: Endianness may be wrong here, could be | |
527 | * sample[3]. | |
528 | */ | |
529 | if (sample[0] & 0x80 | |
530 | && !(last_sample[0] & 0x80)) { | |
531 | count = (int)(*sample) & 0x7fffffff; | |
532 | buffer = g_malloc(count); | |
533 | buflen = 0; | |
534 | for (i = 0; i < count; i++) { | |
535 | memcpy(buffer + buflen, last_sample, 4); | |
536 | buflen += 4; | |
537 | } | |
538 | } else { | |
539 | /* | |
540 | * Just a single sample, next sample | |
541 | * will probably be a count referring | |
542 | * to this -- but this one is still a | |
543 | * part of the stream. | |
544 | */ | |
545 | buffer = sample; | |
546 | buflen = 4; | |
547 | } | |
548 | } else { | |
549 | /* No compression. */ | |
550 | buffer = sample; | |
551 | buflen = 4; | |
552 | } | |
553 | ||
554 | if (num_channels < 4) { | |
555 | /* | |
556 | * Some channel groups may have been turned | |
557 | * off, to speed up transfer between the | |
558 | * hardware and the PC. Expand that here before | |
559 | * submitting it over the session bus -- | |
560 | * whatever is listening on the bus will be | |
561 | * expecting a full 32-bit sample, based on | |
562 | * the number of probes. | |
563 | */ | |
564 | j = 0; | |
565 | memset(tmp_sample, 0, 4); | |
566 | for (i = 0; i < 4; i++) { | |
567 | if (((flag_reg >> 2) & (1 << i)) == 0) { | |
568 | /* | |
569 | * This channel group was | |
570 | * enabled, copy from received | |
571 | * sample. | |
572 | */ | |
573 | tmp_sample[i] = sample[j++]; | |
574 | } | |
575 | } | |
576 | memcpy(sample, tmp_sample, 4); | |
577 | g_debug("ols: full sample 0x%.8x", (int) *sample); | |
578 | } | |
579 | ||
580 | /* the OLS sends its sample buffer backwards. | |
581 | * store it in reverse order here, so we can dump | |
582 | * this on the session bus later. | |
583 | */ | |
584 | offset = (limit_samples - num_transfers / num_channels) * 4; | |
585 | memcpy(raw_sample_buf + offset, sample, 4); | |
586 | ||
587 | if (buffer == sample) | |
588 | memcpy(last_sample, buffer, num_channels); | |
589 | else | |
590 | g_free(buffer); | |
591 | ||
592 | memset(sample, 0, 4); | |
593 | num_bytes = 0; | |
594 | } | |
595 | } else { | |
596 | /* | |
597 | * This is the main loop telling us a timeout was reached, or | |
598 | * we've acquired all the samples we asked for -- we're done. | |
599 | * Send the (properly-ordered) buffer to the frontend. | |
600 | */ | |
601 | if (trigger_at != -1) { | |
602 | /* a trigger was set up, so we need to tell the frontend | |
603 | * about it. | |
604 | */ | |
605 | if (trigger_at > 0) { | |
606 | /* there are pre-trigger samples, send those first */ | |
607 | packet.type = DF_LOGIC; | |
608 | packet.length = trigger_at * 4; | |
609 | packet.unitsize = 4; | |
610 | packet.payload = raw_sample_buf; | |
611 | session_bus(user_data, &packet); | |
612 | } | |
613 | ||
614 | packet.type = DF_TRIGGER; | |
615 | packet.length = 0; | |
616 | session_bus(user_data, &packet); | |
617 | ||
618 | packet.type = DF_LOGIC; | |
619 | packet.length = (limit_samples * 4) - (trigger_at * 4); | |
620 | packet.unitsize = 4; | |
621 | packet.payload = raw_sample_buf + trigger_at * 4; | |
622 | session_bus(user_data, &packet); | |
623 | } else { | |
624 | packet.type = DF_LOGIC; | |
625 | packet.length = limit_samples * 4; | |
626 | packet.unitsize = 4; | |
627 | packet.payload = raw_sample_buf; | |
628 | session_bus(user_data, &packet); | |
629 | } | |
630 | free(raw_sample_buf); | |
631 | ||
632 | serial_flush(fd); | |
633 | serial_close(fd); | |
634 | packet.type = DF_END; | |
635 | packet.length = 0; | |
636 | session_bus(user_data, &packet); | |
637 | } | |
638 | ||
639 | return TRUE; | |
640 | } | |
641 | ||
642 | static int hw_start_acquisition(int device_index, gpointer session_device_id) | |
643 | { | |
644 | int i; | |
645 | struct datafeed_packet *packet; | |
646 | struct datafeed_header *header; | |
647 | struct sigrok_device_instance *sdi; | |
648 | uint32_t trigger_config[4]; | |
649 | uint32_t data; | |
650 | uint16_t readcount, delaycount; | |
651 | uint8_t changrp_mask; | |
652 | ||
653 | if (!(sdi = get_sigrok_device_instance(device_instances, device_index))) | |
654 | return SIGROK_ERR; | |
655 | ||
656 | if (sdi->status != ST_ACTIVE) | |
657 | return SIGROK_ERR; | |
658 | ||
659 | readcount = limit_samples / 4; | |
660 | ||
661 | memset(trigger_config, 0, 16); | |
662 | trigger_config[num_stages-1] |= 0x08; | |
663 | if (trigger_mask[0]) { | |
664 | delaycount = readcount * (1 - capture_ratio / 100.0); | |
665 | trigger_at = (readcount - delaycount) * 4 - num_stages; | |
666 | ||
667 | if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_0, | |
668 | reverse32(trigger_mask[0])) != SIGROK_OK) | |
669 | return SIGROK_ERR; | |
670 | if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_0, | |
671 | reverse32(trigger_value[0])) != SIGROK_OK) | |
672 | return SIGROK_ERR; | |
673 | if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_0, | |
674 | trigger_config[0]) != SIGROK_OK) | |
675 | return SIGROK_ERR; | |
676 | ||
677 | if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_1, | |
678 | reverse32(trigger_mask[1])) != SIGROK_OK) | |
679 | return SIGROK_ERR; | |
680 | if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_1, | |
681 | reverse32(trigger_value[1])) != SIGROK_OK) | |
682 | return SIGROK_ERR; | |
683 | if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_1, | |
684 | trigger_config[1]) != SIGROK_OK) | |
685 | return SIGROK_ERR; | |
686 | ||
687 | if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_2, | |
688 | reverse32(trigger_mask[2])) != SIGROK_OK) | |
689 | return SIGROK_ERR; | |
690 | if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_2, | |
691 | reverse32(trigger_value[2])) != SIGROK_OK) | |
692 | return SIGROK_ERR; | |
693 | if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_2, | |
694 | trigger_config[2]) != SIGROK_OK) | |
695 | return SIGROK_ERR; | |
696 | ||
697 | if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_3, | |
698 | reverse32(trigger_mask[3])) != SIGROK_OK) | |
699 | return SIGROK_ERR; | |
700 | if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_3, | |
701 | reverse32(trigger_value[3])) != SIGROK_OK) | |
702 | return SIGROK_ERR; | |
703 | if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_3, | |
704 | trigger_config[3]) != SIGROK_OK) | |
705 | return SIGROK_ERR; | |
706 | } else { | |
707 | if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_0, | |
708 | trigger_mask[0]) != SIGROK_OK) | |
709 | return SIGROK_ERR; | |
710 | if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_0, | |
711 | trigger_value[0]) != SIGROK_OK) | |
712 | return SIGROK_ERR; | |
713 | if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_0, | |
714 | 0x00000008) != SIGROK_OK) | |
715 | return SIGROK_ERR; | |
716 | delaycount = readcount; | |
717 | } | |
718 | ||
719 | set_configuration_samplerate(sdi, cur_samplerate); | |
720 | ||
721 | /* Send sample limit and pre/post-trigger capture ratio. */ | |
722 | data = ((readcount - 1) & 0xffff) << 16; | |
723 | data |= (delaycount - 1) & 0xffff; | |
724 | if (send_longcommand(sdi->serial->fd, CMD_CAPTURE_SIZE, reverse16(data)) != SIGROK_OK) | |
725 | return SIGROK_ERR; | |
726 | ||
727 | /* | |
728 | * Enable/disable channel groups in the flag register according to the | |
729 | * probe mask. | |
730 | */ | |
731 | changrp_mask = 0; | |
732 | for (i = 0; i < 4; i++) { | |
733 | if (probe_mask & (0xff << (i * 8))) | |
734 | changrp_mask |= (1 << i); | |
735 | } | |
736 | ||
737 | /* The flag register wants them here, and 1 means "disable channel". */ | |
738 | flag_reg |= ~(changrp_mask << 2) & 0x3c; | |
739 | flag_reg |= FLAG_FILTER; | |
740 | data = flag_reg << 24; | |
741 | if (send_longcommand(sdi->serial->fd, CMD_SET_FLAGS, data) != SIGROK_OK) | |
742 | return SIGROK_ERR; | |
743 | ||
744 | /* Start acquisition on the device. */ | |
745 | if (send_shortcommand(sdi->serial->fd, CMD_RUN) != SIGROK_OK) | |
746 | return SIGROK_ERR; | |
747 | ||
748 | source_add(sdi->serial->fd, G_IO_IN, -1, receive_data, | |
749 | session_device_id); | |
750 | ||
751 | /* Send header packet to the session bus. */ | |
752 | packet = g_malloc(sizeof(struct datafeed_packet)); | |
753 | header = g_malloc(sizeof(struct datafeed_header)); | |
754 | if (!packet || !header) | |
755 | return SIGROK_ERR; | |
756 | packet->type = DF_HEADER; | |
757 | packet->length = sizeof(struct datafeed_header); | |
758 | packet->payload = (unsigned char *)header; | |
759 | header->feed_version = 1; | |
760 | gettimeofday(&header->starttime, NULL); | |
761 | header->samplerate = cur_samplerate; | |
762 | header->protocol_id = PROTO_RAW; | |
763 | header->num_probes = NUM_PROBES; | |
764 | session_bus(session_device_id, packet); | |
765 | g_free(header); | |
766 | g_free(packet); | |
767 | ||
768 | return SIGROK_OK; | |
769 | } | |
770 | ||
771 | static void hw_stop_acquisition(int device_index, gpointer session_device_id) | |
772 | { | |
773 | struct datafeed_packet packet; | |
774 | ||
775 | /* QUICK HACK */ | |
776 | device_index = device_index; | |
777 | ||
778 | packet.type = DF_END; | |
779 | packet.length = 0; | |
780 | session_bus(session_device_id, &packet); | |
781 | } | |
782 | ||
783 | struct device_plugin ols_plugin_info = { | |
784 | "ols", | |
785 | 1, | |
786 | hw_init, | |
787 | hw_cleanup, | |
788 | hw_opendev, | |
789 | hw_closedev, | |
790 | hw_get_device_info, | |
791 | hw_get_status, | |
792 | hw_get_capabilities, | |
793 | hw_set_configuration, | |
794 | hw_start_acquisition, | |
795 | hw_stop_acquisition, | |
796 | }; |