srd: uart_dump: Small simplification.

[libsigrokdecode.git] / decoders / usb / usb.py

##
## This file is part of the sigrok project.
##
## Copyright (C) 2011 Gareth McMullin <gareth@blacksphere.co.nz>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
##

# USB (full-speed) protocol decoder

import sigrokdecode as srd

# Symbols (used as states of our state machine, too)
syms = {
        # (<dp>, <dm>): <state>
        (0, 0): 'SE0',
        (1, 0): 'J',
        (0, 1): 'K',
        (1, 1): 'SE1',
}

# ...
pids = {
    '10000111': 'OUT',      # Tokens
    '10010110': 'IN',
    '10100101': 'SOF',
    '10110100': 'SETUP',
    '11000011': 'DATA0',    # Data
    '11010010': 'DATA1',
    '01001011': 'ACK',      # Handshake
    '01011010': 'NAK',
    '01111000': 'STALL',
    '01101001': 'NYET',
}

def bitstr_to_num(bitstr):
    if not bitstr:
        return 0
    l = list(bitstr)
    l.reverse()
    return int(''.join(l), 2)

def packet_decode(packet):
    sync = packet[:8]
    pid = packet[8:16]
    pid = pids.get(pid, pid)

    # Remove CRC.
    if pid in ('OUT', 'IN', 'SOF', 'SETUP'):
        data = packet[16:-5]
        if pid == 'SOF':
            data = str(bitstr_to_num(data))
        else:
            dev = bitstr_to_num(data[:7])
            ep = bitstr_to_num(data[7:])
            data = 'DEV %d EP %d' % (dev, ep)
    elif pid in ('DATA0', 'DATA1'):
        data = packet[16:-16]
        tmp = ''
        while data:
            tmp += '%02x ' % bitstr_to_num(data[:8])
            data = data[8:]
        data = tmp
    else:
        data = packet[16:]

    if sync != '00000001':
        return 'SYNC INVALID!'

    return pid + ' ' + data

class Decoder(srd.Decoder):
    api_version = 1
    id = 'usb'
    name = 'USB'
    longname = 'Universal Serial Bus'
    desc = 'USB 1.x (full-speed) serial protocol.'
    license = 'gplv2+'
    inputs = ['logic']
    outputs = ['usb']
    probes = [
        {'id': 'dp', 'name': 'D+', 'desc': 'USB D+ signal'},
        {'id': 'dm', 'name': 'D-', 'desc': 'USB D- signal'},
    ]
    optional_probes = []
    options = {}
    annotations = [
        ['Text', 'Human-readable text']
    ]

    def __init__(self):
        self.sym = 'J'
        self.samplenum = 0
        self.scount = 0
        self.packet = ''

    def start(self, metadata):
        self.samplerate = metadata['samplerate']

        if self.samplerate < 48000000:
            raise Exception('Samplerate (%d) not sufficient for USB '
                            'decoding, need at least 48MHz' % self.samplerate)

        # self.out_proto = self.add(srd.OUTPUT_PROTO, 'usb')
        self.out_ann = self.add(srd.OUTPUT_ANN, 'usb')

    def report(self):
        pass

    def decode(self, ss, es, data):
        for (self.samplenum, (dp, dm)) in data:

            # Note: self.samplenum is the absolute sample number, whereas
            # self.scount only counts the number of samples since the
            # last change in the D+/D- lines.
            self.scount += 1

            sym = syms[dp, dm]

            # Wait for a symbol change (i.e., change in D+/D- lines).
            if sym == self.sym:
                continue

            if self.scount == 1:
                # We ignore single sample width "pulses", i.e., symbol changes
                # (D+/D- line changes). I sometimes get these with the OLS.
                self.sym = sym
                self.scount = 0
                continue

            # How many bits since the last transition?
            if self.packet != '' or self.sym != 'J':
                bitcount = int((self.scount - 1) * 12000000 / self.samplerate)
            else:
                bitcount = 0

            if self.sym == 'SE0':
                if bitcount == 1:
                    # End-Of-Packet (EOP)
                    self.put(0, 0, self.out_ann,
                             [0, [packet_decode(self.packet), self.packet]])
                else:
                    # Longer than EOP, assume reset.
                    self.put(0, 0, self.out_ann, [0, ['RESET']])
                self.scount = 0
                self.sym = sym
                self.packet = ''
                continue

            # Add bits to the packet string.
            self.packet += '1' * bitcount

            # Handle bit stuffing.
            if bitcount < 6 and sym != 'SE0':
                self.packet += '0'
            elif bitcount > 6:
                self.put(0, 0, self.out_ann, [0, ['BIT STUFF ERROR']])

            self.scount = 0
            self.sym = sym