[libsigrokdecode.git] / decoders / pan1321 / pd.py

##
## This file is part of the libsigrokdecode project.
##
## Copyright (C) 2012-2013 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
##

# Panasonic PAN1321 Bluetooth module protocol decoder

import sigrokdecode as srd

# ...
RX = 0
TX = 1

class Decoder(srd.Decoder):
    api_version = 1
    id = 'pan1321'
    name = 'PAN1321'
    longname = 'Panasonic PAN1321'
    desc = 'Bluetooth RF module with Serial Port Profile (SPP).'
    license = 'gplv2+'
    inputs = ['uart']
    outputs = ['pan1321']
    probes = []
    optional_probes = []
    options = {}
    annotations = [
        ['Text (verbose)', 'Human-readable text (verbose)'],
        ['Text', 'Human-readable text'],
        ['Warnings', 'Human-readable warnings'],
    ]

    def __init__(self, **kwargs):
        self.cmd = ['', '']
        self.ss_block = None

    def start(self):
        # self.out_proto = self.register(srd.OUTPUT_PYTHON)
        self.out_ann = self.register(srd.OUTPUT_ANN)

    def putx(self, data):
        self.put(self.ss_block, self.es_block, self.out_ann, data)

    def handle_host_command(self, rxtx, s):
        if s.startswith('AT+JAAC'):
            # AT+JAAC=<auto_accept> (0 or 1)
            p = s[s.find('=') + 1:]
            if p not in ('0', '1'):
                self.putx([2, ['Warning: Invalid JAAC parameter "%s"' % p]])
                return
            x = 'Auto' if (p == '1') else 'Don\'t auto'
            self.putx([0, ['%s-accept new connections' % x]])
            self.putx([1, ['%s-accept connections' % x]])
        elif s.startswith('AT+JPRO'):
            # AT+JPRO=<mode> (0 or 1)
            p = s[s.find('=') + 1:]
            if p not in ('0', '1'):
                self.putx([2, ['Warning: Invalid JPRO parameter "%s"' % p]])
                return
            onoff = 'off' if (p == '0') else 'on'
            x = 'Leaving' if (p == '0') else 'Entering'
            self.putx([0, ['%s production mode' % x]])
            self.putx([1, ['Production mode = %s' % onoff]])
        elif s.startswith('AT+JRES'):
            # AT+JRES
            if s != 'AT+JRES': # JRES has no params.
                self.putx([2, ['Warning: Invalid JRES usage.']])
                return
            self.putx([0, ['Triggering a software reset']])
            self.putx([1, ['Reset']])
        elif s.startswith('AT+JSDA'):
            # AT+JSDA=<l>,<d> (l: length in bytes, d: data)
            # l is (max?) 3 decimal digits and ranges from 1 to MTU size.
            # Data can be ASCII or binary values (l bytes total).
            l, d = s[s.find('=') + 1:].split(',')
            if not l.isnumeric():
                self.putx([2, ['Warning: Invalid data length "%s".' % l]])
            if int(l) != len(d):
                self.putx([2, ['Warning: Data length mismatch (%d != %d).' % \
                          (int(l), len(d))]])
            # TODO: Warn if length > MTU size (which is firmware-dependent
            # and is negotiated by both Bluetooth devices upon connection).
            b = ''.join(['%02x ' % ord(c) for c in d])[:-1]
            self.putx([0, ['Sending %d data bytes: %s' % (int(l), b)]])
            self.putx([1, ['Send %d = %s' % (int(l), b)]])
        elif s.startswith('AT+JSEC'):
            # AT+JSEC=<secmode>,<linkkey_info>,<pintype>,<pinlen>,<pin>
            # secmode: Security mode 1 or 3 (default).
            # linkkey_info: Must be 1 or 2. Has no function according to docs.
            # pintype: 1: variable pin (default), 2: fixed pin.
            # pinlen: PIN length (2 decimal digits). Max. PIN length is 16.
            # pin: The Bluetooth PIN ('pinlen' chars). Used if pintype=2.
            # Note: AT+JSEC (if used) must be the first command after reset.
            # TODO: Parse all the other parameters.
            pin = s[-4:]
            self.putx([0, ['Host set the Bluetooth PIN to "' + pin + '"']])
            self.putx([1, ['PIN = ' + pin]])
        elif s.startswith('AT+JSLN'):
            # AT+JSLN=<namelen>,<name>
            # namelen: Friendly name length (2 decimal digits). Max. len is 18.
            # name: The Bluetooth "friendly name" ('namelen' ASCII characters).
            name = s[s.find(',') + 1:]
            self.putx([0, ['Host set the Bluetooth name to "' + name + '"']])
            self.putx([1, ['BT name = ' + name]])
        else:
            self.putx([0, ['Host sent unsupported command: %s' % s]])
            self.putx([1, ['Unsupported command: %s' % s]])

    def handle_device_reply(self, rxtx, s):
        if s == 'ROK':
            self.putx([0, ['Device initialized correctly']])
            self.putx([1, ['Init']])
        elif s == 'OK':
            self.putx([0, ['Device acknowledged last command']])
            self.putx([1, ['ACK']])
        elif s.startswith('ERR'):
            error = s[s.find('=') + 1:]
            self.putx([0, ['Device sent error code ' + error]])
            self.putx([1, ['ERR = ' + error]])
        else:
            self.putx([0, ['Device sent an unknown reply: %s' % s]])
            self.putx([1, ['Unknown reply: %s' % s]])

    def decode(self, ss, es, data):
        ptype, rxtx, pdata = data

        # For now, ignore all UART packets except the actual data packets.
        if ptype != 'DATA':
            return

        # If this is the start of a command/reply, remember the start sample.
        if self.cmd[rxtx] == '':
            self.ss_block = ss

        # Append a new (ASCII) byte to the currently built/parsed command.
        self.cmd[rxtx] += chr(pdata)

        # Get packets/bytes until an \r\n sequence is found (end of command).
        if self.cmd[rxtx][-2:] != '\r\n':
            return

        # Handle host commands and device replies.
        # We remove trailing \r\n from the strings before handling them.
        self.es_block = es
        if rxtx == RX:
            self.handle_device_reply(rxtx, self.cmd[rxtx][:-2])
        elif rxtx == TX:
            self.handle_host_command(rxtx, self.cmd[rxtx][:-2])
        else:
            raise Exception('Invalid rxtx value: %d' % rxtx)

        self.cmd[rxtx] = ''
Commit	Line	Data
	1	##
	2	## This file is part of the libsigrokdecode project.
	3	##
	4	## Copyright (C) 2012-2013 Uwe Hermann <uwe@hermann-uwe.de>
	5	##
	6	## This program is free software; you can redistribute it and/or modify
	7	## it under the terms of the GNU General Public License as published by
	8	## the Free Software Foundation; either version 2 of the License, or
	9	## (at your option) any later version.
	10	##
	11	## This program is distributed in the hope that it will be useful,
	12	## but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	## GNU General Public License for more details.
	15	##
	16	## You should have received a copy of the GNU General Public License
	17	## along with this program; if not, write to the Free Software
	18	## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
	19	##
	20
	21	# Panasonic PAN1321 Bluetooth module protocol decoder
	22
	23	import sigrokdecode as srd
	24
	25	# ...
	26	RX = 0
	27	TX = 1
	28
	29	class Decoder(srd.Decoder):
	30	api_version = 1
	31	id = 'pan1321'
	32	name = 'PAN1321'
	33	longname = 'Panasonic PAN1321'
	34	desc = 'Bluetooth RF module with Serial Port Profile (SPP).'
	35	license = 'gplv2+'
	36	inputs = ['uart']
	37	outputs = ['pan1321']
	38	probes = []
	39	optional_probes = []
	40	options = {}
	41	annotations = [
	42	['Text (verbose)', 'Human-readable text (verbose)'],
	43	['Text', 'Human-readable text'],
	44	['Warnings', 'Human-readable warnings'],
	45	]
	46
	47	def __init__(self, **kwargs):
	48	self.cmd = ['', '']
	49	self.ss_block = None
	50
	51	def start(self):
	52	# self.out_proto = self.register(srd.OUTPUT_PYTHON)
	53	self.out_ann = self.register(srd.OUTPUT_ANN)
	54
	55	def putx(self, data):
	56	self.put(self.ss_block, self.es_block, self.out_ann, data)
	57
	58	def handle_host_command(self, rxtx, s):
	59	if s.startswith('AT+JAAC'):
	60	# AT+JAAC=<auto_accept> (0 or 1)
	61	p = s[s.find('=') + 1:]
	62	if p not in ('0', '1'):
	63	self.putx([2, ['Warning: Invalid JAAC parameter "%s"' % p]])
	64	return
	65	x = 'Auto' if (p == '1') else 'Don\'t auto'
	66	self.putx([0, ['%s-accept new connections' % x]])
	67	self.putx([1, ['%s-accept connections' % x]])
	68	elif s.startswith('AT+JPRO'):
	69	# AT+JPRO=<mode> (0 or 1)
	70	p = s[s.find('=') + 1:]
	71	if p not in ('0', '1'):
	72	self.putx([2, ['Warning: Invalid JPRO parameter "%s"' % p]])
	73	return
	74	onoff = 'off' if (p == '0') else 'on'
	75	x = 'Leaving' if (p == '0') else 'Entering'
	76	self.putx([0, ['%s production mode' % x]])
	77	self.putx([1, ['Production mode = %s' % onoff]])
	78	elif s.startswith('AT+JRES'):
	79	# AT+JRES
	80	if s != 'AT+JRES': # JRES has no params.
	81	self.putx([2, ['Warning: Invalid JRES usage.']])
	82	return
	83	self.putx([0, ['Triggering a software reset']])
	84	self.putx([1, ['Reset']])
	85	elif s.startswith('AT+JSDA'):
	86	# AT+JSDA=<l>,<d> (l: length in bytes, d: data)
	87	# l is (max?) 3 decimal digits and ranges from 1 to MTU size.
	88	# Data can be ASCII or binary values (l bytes total).
	89	l, d = s[s.find('=') + 1:].split(',')
	90	if not l.isnumeric():
	91	self.putx([2, ['Warning: Invalid data length "%s".' % l]])
	92	if int(l) != len(d):
	93	self.putx([2, ['Warning: Data length mismatch (%d != %d).' % \
	94	(int(l), len(d))]])
	95	# TODO: Warn if length > MTU size (which is firmware-dependent
	96	# and is negotiated by both Bluetooth devices upon connection).
	97	b = ''.join(['%02x ' % ord(c) for c in d])[:-1]
	98	self.putx([0, ['Sending %d data bytes: %s' % (int(l), b)]])
	99	self.putx([1, ['Send %d = %s' % (int(l), b)]])
	100	elif s.startswith('AT+JSEC'):
	101	# AT+JSEC=<secmode>,<linkkey_info>,<pintype>,<pinlen>,<pin>
	102	# secmode: Security mode 1 or 3 (default).
	103	# linkkey_info: Must be 1 or 2. Has no function according to docs.
	104	# pintype: 1: variable pin (default), 2: fixed pin.
	105	# pinlen: PIN length (2 decimal digits). Max. PIN length is 16.
	106	# pin: The Bluetooth PIN ('pinlen' chars). Used if pintype=2.
	107	# Note: AT+JSEC (if used) must be the first command after reset.
	108	# TODO: Parse all the other parameters.
	109	pin = s[-4:]
	110	self.putx([0, ['Host set the Bluetooth PIN to "' + pin + '"']])
	111	self.putx([1, ['PIN = ' + pin]])
	112	elif s.startswith('AT+JSLN'):
	113	# AT+JSLN=<namelen>,<name>
	114	# namelen: Friendly name length (2 decimal digits). Max. len is 18.
	115	# name: The Bluetooth "friendly name" ('namelen' ASCII characters).
	116	name = s[s.find(',') + 1:]
	117	self.putx([0, ['Host set the Bluetooth name to "' + name + '"']])
	118	self.putx([1, ['BT name = ' + name]])
	119	else:
	120	self.putx([0, ['Host sent unsupported command: %s' % s]])
	121	self.putx([1, ['Unsupported command: %s' % s]])
	122
	123	def handle_device_reply(self, rxtx, s):
	124	if s == 'ROK':
	125	self.putx([0, ['Device initialized correctly']])
	126	self.putx([1, ['Init']])
	127	elif s == 'OK':
	128	self.putx([0, ['Device acknowledged last command']])
	129	self.putx([1, ['ACK']])
	130	elif s.startswith('ERR'):
	131	error = s[s.find('=') + 1:]
	132	self.putx([0, ['Device sent error code ' + error]])
	133	self.putx([1, ['ERR = ' + error]])
	134	else:
	135	self.putx([0, ['Device sent an unknown reply: %s' % s]])
	136	self.putx([1, ['Unknown reply: %s' % s]])
	137
	138	def decode(self, ss, es, data):
	139	ptype, rxtx, pdata = data
	140
	141	# For now, ignore all UART packets except the actual data packets.
	142	if ptype != 'DATA':
	143	return
	144
	145	# If this is the start of a command/reply, remember the start sample.
	146	if self.cmd[rxtx] == '':
	147	self.ss_block = ss
	148
	149	# Append a new (ASCII) byte to the currently built/parsed command.
	150	self.cmd[rxtx] += chr(pdata)
	151
	152	# Get packets/bytes until an \r\n sequence is found (end of command).
	153	if self.cmd[rxtx][-2:] != '\r\n':
	154	return
	155
	156	# Handle host commands and device replies.
	157	# We remove trailing \r\n from the strings before handling them.
	158	self.es_block = es
	159	if rxtx == RX:
	160	self.handle_device_reply(rxtx, self.cmd[rxtx][:-2])
	161	elif rxtx == TX:
	162	self.handle_host_command(rxtx, self.cmd[rxtx][:-2])
	163	else:
	164	raise Exception('Invalid rxtx value: %d' % rxtx)
	165
	166	self.cmd[rxtx] = ''
	167