]>
Commit | Line | Data |
---|---|---|
a1bb33af | 1 | /* |
50985c20 | 2 | * This file is part of the libsigrok project. |
a1bb33af | 3 | * |
c73d2ea4 | 4 | * Copyright (C) 2010-2012 Bert Vermeulen <bert@biot.com> |
a1bb33af UH |
5 | * |
6 | * This program is free software: you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation, either version 3 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
18 | */ | |
19 | ||
6d116114 | 20 | #include "protocol.h" |
a1bb33af | 21 | |
8fdecced | 22 | #define VENDOR_NAME "ZEROPLUS" |
a1bb33af UH |
23 | #define USB_INTERFACE 0 |
24 | #define USB_CONFIGURATION 1 | |
25 | #define NUM_TRIGGER_STAGES 4 | |
fed16f06 | 26 | #define PACKET_SIZE 2048 /* ?? */ |
a1bb33af | 27 | |
0ab0cb94 TY |
28 | //#define ZP_EXPERIMENTAL |
29 | ||
e495a676 UH |
30 | struct zp_model { |
31 | uint16_t vid; | |
32 | uint16_t pid; | |
428edbe1 | 33 | char *model_name; |
a1bb33af | 34 | unsigned int channels; |
fed16f06 | 35 | unsigned int sample_depth; /* In Ksamples/channel */ |
a1bb33af | 36 | unsigned int max_sampling_freq; |
e495a676 | 37 | }; |
a1bb33af | 38 | |
fed16f06 UH |
39 | /* |
40 | * Note -- 16032, 16064 and 16128 *usually* -- but not always -- have the | |
41 | * same 128K sample depth. | |
42 | */ | |
e495a676 | 43 | static const struct zp_model zeroplus_models[] = { |
9e5670d0 | 44 | {0x0c12, 0x7002, "LAP-16128U", 16, 128, 200}, |
428edbe1 | 45 | {0x0c12, 0x7009, "LAP-C(16064)", 16, 64, 100}, |
e495a676 | 46 | {0x0c12, 0x700a, "LAP-C(16128)", 16, 128, 200}, |
5db0c668 RD |
47 | {0x0c12, 0x700b, "LAP-C(32128)", 32, 128, 200}, |
48 | {0x0c12, 0x700c, "LAP-C(321000)", 32, 1024, 200}, | |
49 | {0x0c12, 0x700d, "LAP-C(322000)", 32, 2048, 200}, | |
e495a676 | 50 | {0x0c12, 0x700e, "LAP-C(16032)", 16, 32, 100}, |
428edbe1 | 51 | {0x0c12, 0x7016, "LAP-C(162000)", 16, 2048, 200}, |
e3594306 | 52 | {0x0c12, 0x7100, "AKIP-9101", 16, 256, 200}, |
428edbe1 | 53 | { 0, 0, 0, 0, 0, 0 } |
a1bb33af UH |
54 | }; |
55 | ||
f254bc4b | 56 | static const uint32_t devopts[] = { |
1953564a | 57 | SR_CONF_LOGIC_ANALYZER, |
5827f61b BV |
58 | SR_CONF_LIMIT_SAMPLES | SR_CONF_SET | SR_CONF_LIST, |
59 | SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
60 | SR_CONF_TRIGGER_MATCH | SR_CONF_LIST, | |
61 | SR_CONF_CAPTURE_RATIO | SR_CONF_GET | SR_CONF_SET, | |
62 | SR_CONF_VOLTAGE_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
a1bb33af UH |
63 | }; |
64 | ||
28731bab BV |
65 | static const int32_t trigger_matches[] = { |
66 | SR_TRIGGER_ZERO, | |
67 | SR_TRIGGER_ONE, | |
68 | }; | |
69 | ||
d261dbbf | 70 | /* |
ba7dd8bb | 71 | * ZEROPLUS LAP-C (16032) numbers the 16 channels A0-A7 and B0-B7. |
d261dbbf UH |
72 | * We currently ignore other untested/unsupported devices here. |
73 | */ | |
ba7dd8bb | 74 | static const char *channel_names[] = { |
78693401 UH |
75 | "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", |
76 | "B0", "B1", "B2", "B3", "B4", "B5", "B6", "B7", | |
5db0c668 RD |
77 | "C0", "C1", "C2", "C3", "C4", "C5", "C6", "C7", |
78 | "D0", "D1", "D2", "D3", "D4", "D5", "D6", "D7", | |
464d12c7 KS |
79 | }; |
80 | ||
32756547 | 81 | SR_PRIV struct sr_dev_driver zeroplus_logic_cube_driver_info; |
a1bb33af | 82 | |
fed16f06 UH |
83 | /* |
84 | * The hardware supports more samplerates than these, but these are the | |
85 | * options hardcoded into the vendor's Windows GUI. | |
86 | */ | |
a1bb33af | 87 | |
8386096f | 88 | static const uint64_t samplerates_100[] = { |
17548571 UH |
89 | SR_HZ(100), |
90 | SR_HZ(500), | |
91 | SR_KHZ(1), | |
92 | SR_KHZ(5), | |
93 | SR_KHZ(25), | |
94 | SR_KHZ(50), | |
95 | SR_KHZ(100), | |
96 | SR_KHZ(200), | |
97 | SR_KHZ(400), | |
98 | SR_KHZ(800), | |
99 | SR_MHZ(1), | |
100 | SR_MHZ(10), | |
101 | SR_MHZ(25), | |
102 | SR_MHZ(50), | |
103 | SR_MHZ(80), | |
104 | SR_MHZ(100), | |
17548571 UH |
105 | }; |
106 | ||
8386096f | 107 | const uint64_t samplerates_200[] = { |
c9140419 UH |
108 | SR_HZ(100), |
109 | SR_HZ(500), | |
59df0c77 UH |
110 | SR_KHZ(1), |
111 | SR_KHZ(5), | |
112 | SR_KHZ(25), | |
113 | SR_KHZ(50), | |
114 | SR_KHZ(100), | |
115 | SR_KHZ(200), | |
116 | SR_KHZ(400), | |
117 | SR_KHZ(800), | |
118 | SR_MHZ(1), | |
119 | SR_MHZ(10), | |
120 | SR_MHZ(25), | |
121 | SR_MHZ(50), | |
122 | SR_MHZ(80), | |
123 | SR_MHZ(100), | |
124 | SR_MHZ(150), | |
125 | SR_MHZ(200), | |
bf43ea23 | 126 | }; |
a1bb33af | 127 | |
6078d2c9 | 128 | static int dev_close(struct sr_dev_inst *sdi); |
a1bb33af | 129 | |
3316e149 BV |
130 | SR_PRIV int zp_set_samplerate(struct dev_context *devc, uint64_t samplerate) |
131 | { | |
132 | int i; | |
133 | ||
134 | for (i = 0; ARRAY_SIZE(samplerates_200); i++) | |
135 | if (samplerate == samplerates_200[i]) | |
136 | break; | |
137 | ||
138 | if (i == ARRAY_SIZE(samplerates_200) || samplerate > devc->max_samplerate) { | |
139 | sr_err("Unsupported samplerate: %" PRIu64 "Hz.", samplerate); | |
140 | return SR_ERR_ARG; | |
141 | } | |
142 | ||
143 | sr_info("Setting samplerate to %" PRIu64 "Hz.", samplerate); | |
144 | ||
145 | if (samplerate >= SR_MHZ(1)) | |
146 | analyzer_set_freq(samplerate / SR_MHZ(1), FREQ_SCALE_MHZ); | |
147 | else if (samplerate >= SR_KHZ(1)) | |
148 | analyzer_set_freq(samplerate / SR_KHZ(1), FREQ_SCALE_KHZ); | |
149 | else | |
150 | analyzer_set_freq(samplerate, FREQ_SCALE_HZ); | |
151 | ||
152 | devc->cur_samplerate = samplerate; | |
153 | ||
154 | return SR_OK; | |
155 | } | |
156 | ||
4f840ce9 | 157 | static int init(struct sr_dev_driver *di, struct sr_context *sr_ctx) |
61136ea6 | 158 | { |
f6beaac5 | 159 | return std_init(sr_ctx, di, LOG_PREFIX); |
61136ea6 BV |
160 | } |
161 | ||
4f840ce9 | 162 | static GSList *scan(struct sr_dev_driver *di, GSList *options) |
a1bb33af | 163 | { |
d68e2d1a | 164 | struct sr_dev_inst *sdi; |
310e9e9b BV |
165 | struct drv_context *drvc; |
166 | struct dev_context *devc; | |
e495a676 | 167 | const struct zp_model *prof; |
a1bb33af | 168 | struct libusb_device_descriptor des; |
ee4f9bb1 | 169 | struct libusb_device_handle *hdl; |
a1bb33af | 170 | libusb_device **devlist; |
428edbe1 | 171 | GSList *devices; |
ee4f9bb1 SA |
172 | int ret, i, j; |
173 | char serial_num[64], connection_id[64]; | |
a1bb33af | 174 | |
4ca38984 | 175 | (void)options; |
64d33dc2 | 176 | |
a873c594 | 177 | drvc = di->priv; |
4b97c74e | 178 | |
4ca38984 BV |
179 | devices = NULL; |
180 | ||
8fdecced | 181 | /* Find all ZEROPLUS analyzers and add them to device list. */ |
d4abb463 | 182 | libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist); /* TODO: Errors. */ |
fed16f06 UH |
183 | |
184 | for (i = 0; devlist[i]; i++) { | |
ebc34738 UH |
185 | ret = libusb_get_device_descriptor(devlist[i], &des); |
186 | if (ret != 0) { | |
6d116114 | 187 | sr_err("Failed to get device descriptor: %s.", |
d4928d71 | 188 | libusb_error_name(ret)); |
a1bb33af UH |
189 | continue; |
190 | } | |
191 | ||
ee4f9bb1 SA |
192 | if ((ret = libusb_open(devlist[i], &hdl)) < 0) |
193 | continue; | |
194 | ||
195 | if (des.iSerialNumber == 0) { | |
196 | serial_num[0] = '\0'; | |
197 | } else if ((ret = libusb_get_string_descriptor_ascii(hdl, | |
198 | des.iSerialNumber, (unsigned char *) serial_num, | |
199 | sizeof(serial_num))) < 0) { | |
200 | sr_warn("Failed to get serial number string descriptor: %s.", | |
201 | libusb_error_name(ret)); | |
202 | continue; | |
203 | } | |
204 | ||
205 | libusb_close(hdl); | |
206 | ||
207 | usb_get_port_path(devlist[i], connection_id, sizeof(connection_id)); | |
208 | ||
428edbe1 BV |
209 | prof = NULL; |
210 | for (j = 0; j < zeroplus_models[j].vid; j++) { | |
211 | if (des.idVendor == zeroplus_models[j].vid && | |
212 | des.idProduct == zeroplus_models[j].pid) { | |
213 | prof = &zeroplus_models[j]; | |
bf43ea23 | 214 | } |
a1bb33af | 215 | } |
e495a676 | 216 | /* Skip if the device was not found. */ |
428edbe1 BV |
217 | if (!prof) |
218 | continue; | |
e495a676 | 219 | sr_info("Found ZEROPLUS %s.", prof->model_name); |
428edbe1 BV |
220 | |
221 | /* Register the device with libsigrok. */ | |
aac29cc1 | 222 | sdi = g_malloc0(sizeof(struct sr_dev_inst)); |
0af636be UH |
223 | sdi->status = SR_ST_INACTIVE; |
224 | sdi->vendor = g_strdup(VENDOR_NAME); | |
225 | sdi->model = g_strdup(prof->model_name); | |
a873c594 | 226 | sdi->driver = di; |
ee4f9bb1 SA |
227 | sdi->serial_num = g_strdup(serial_num); |
228 | sdi->connection_id = g_strdup(connection_id); | |
428edbe1 BV |
229 | |
230 | /* Allocate memory for our private driver context. */ | |
f57d8ffe | 231 | devc = g_malloc0(sizeof(struct dev_context)); |
310e9e9b | 232 | sdi->priv = devc; |
17548571 | 233 | devc->prof = prof; |
310e9e9b | 234 | devc->num_channels = prof->channels; |
0ab0cb94 | 235 | #ifdef ZP_EXPERIMENTAL |
e93fb98b | 236 | devc->max_sample_depth = 128 * 1024; |
0ab0cb94 TY |
237 | devc->max_samplerate = 200; |
238 | #else | |
e93fb98b | 239 | devc->max_sample_depth = prof->sample_depth * 1024; |
0ab0cb94 TY |
240 | devc->max_samplerate = prof->max_sampling_freq; |
241 | #endif | |
242 | devc->max_samplerate *= SR_MHZ(1); | |
243 | devc->memory_size = MEMORY_SIZE_8K; | |
310e9e9b | 244 | // memset(devc->trigger_buffer, 0, NUM_TRIGGER_STAGES); |
428edbe1 | 245 | |
ba7dd8bb | 246 | /* Fill in channellist according to this device's profile. */ |
5e23fcab ML |
247 | for (j = 0; j < devc->num_channels; j++) |
248 | sr_channel_new(sdi, j, SR_CHANNEL_LOGIC, TRUE, | |
c368e6f3 | 249 | channel_names[j]); |
428edbe1 BV |
250 | |
251 | devices = g_slist_append(devices, sdi); | |
310e9e9b | 252 | drvc->instances = g_slist_append(drvc->instances, sdi); |
8111446a | 253 | sdi->inst_type = SR_INST_USB; |
609bfd75 | 254 | sdi->conn = sr_usb_dev_inst_new( |
428edbe1 BV |
255 | libusb_get_bus_number(devlist[i]), |
256 | libusb_get_device_address(devlist[i]), NULL); | |
a1bb33af UH |
257 | } |
258 | libusb_free_device_list(devlist, 1); | |
259 | ||
4ca38984 | 260 | return devices; |
a1bb33af UH |
261 | } |
262 | ||
4f840ce9 | 263 | static GSList *dev_list(const struct sr_dev_driver *di) |
811deee4 | 264 | { |
0e94d524 | 265 | return ((struct drv_context *)(di->priv))->instances; |
811deee4 BV |
266 | } |
267 | ||
6078d2c9 | 268 | static int dev_open(struct sr_dev_inst *sdi) |
a1bb33af | 269 | { |
4f840ce9 | 270 | struct sr_dev_driver *di = sdi->driver; |
310e9e9b | 271 | struct dev_context *devc; |
e495a676 | 272 | struct drv_context *drvc; |
609bfd75 | 273 | struct sr_usb_dev_inst *usb; |
428edbe1 | 274 | libusb_device **devlist, *dev; |
428edbe1 | 275 | int device_count, ret, i; |
ee4f9bb1 | 276 | char connection_id[64]; |
a1bb33af | 277 | |
e495a676 | 278 | drvc = di->priv; |
609bfd75 | 279 | usb = sdi->conn; |
e495a676 | 280 | |
310e9e9b | 281 | if (!(devc = sdi->priv)) { |
6d116114 | 282 | sr_err("%s: sdi->priv was NULL", __func__); |
bf43ea23 UH |
283 | return SR_ERR_ARG; |
284 | } | |
285 | ||
d4abb463 PS |
286 | device_count = libusb_get_device_list(drvc->sr_ctx->libusb_ctx, |
287 | &devlist); | |
428edbe1 | 288 | if (device_count < 0) { |
6d116114 | 289 | sr_err("Failed to retrieve device list."); |
428edbe1 BV |
290 | return SR_ERR; |
291 | } | |
292 | ||
293 | dev = NULL; | |
294 | for (i = 0; i < device_count; i++) { | |
ee4f9bb1 SA |
295 | usb_get_port_path(devlist[i], connection_id, sizeof(connection_id)); |
296 | if (!strcmp(sdi->connection_id, connection_id)) { | |
428edbe1 BV |
297 | dev = devlist[i]; |
298 | break; | |
299 | } | |
300 | } | |
301 | if (!dev) { | |
ee4f9bb1 SA |
302 | sr_err("Device on %d.%d (logical) / %s (physical) disappeared!", |
303 | usb->bus, usb->address, sdi->connection_id); | |
428edbe1 BV |
304 | return SR_ERR; |
305 | } | |
306 | ||
609bfd75 | 307 | if (!(ret = libusb_open(dev, &(usb->devhdl)))) { |
428edbe1 | 308 | sdi->status = SR_ST_ACTIVE; |
ee4f9bb1 SA |
309 | sr_info("Opened device on %d.%d (logical) / %s (physical) interface %d.", |
310 | usb->bus, usb->address, sdi->connection_id, USB_INTERFACE); | |
428edbe1 | 311 | } else { |
6d116114 | 312 | sr_err("Failed to open device: %s.", libusb_error_name(ret)); |
428edbe1 BV |
313 | return SR_ERR; |
314 | } | |
315 | ||
609bfd75 | 316 | ret = libusb_set_configuration(usb->devhdl, USB_CONFIGURATION); |
ebc34738 | 317 | if (ret < 0) { |
6d116114 | 318 | sr_err("Unable to set USB configuration %d: %s.", |
d4928d71 | 319 | USB_CONFIGURATION, libusb_error_name(ret)); |
185ae2c5 UH |
320 | return SR_ERR; |
321 | } | |
322 | ||
609bfd75 | 323 | ret = libusb_claim_interface(usb->devhdl, USB_INTERFACE); |
ebc34738 | 324 | if (ret != 0) { |
6d116114 | 325 | sr_err("Unable to claim interface: %s.", |
d4928d71 | 326 | libusb_error_name(ret)); |
e46b8fb1 | 327 | return SR_ERR; |
a1bb33af | 328 | } |
185ae2c5 | 329 | |
e495a676 | 330 | /* Set default configuration after power on. */ |
609bfd75 BV |
331 | if (analyzer_read_status(usb->devhdl) == 0) |
332 | analyzer_configure(usb->devhdl); | |
0ab0cb94 | 333 | |
609bfd75 BV |
334 | analyzer_reset(usb->devhdl); |
335 | analyzer_initialize(usb->devhdl); | |
a1bb33af | 336 | |
0ab0cb94 | 337 | //analyzer_set_memory_size(MEMORY_SIZE_512K); |
fed16f06 | 338 | // analyzer_set_freq(g_freq, g_freq_scale); |
a1bb33af | 339 | analyzer_set_trigger_count(1); |
408e7199 UH |
340 | // analyzer_set_ramsize_trigger_address((((100 - g_pre_trigger) |
341 | // * get_memory_size(g_memory_size)) / 100) >> 2); | |
a1bb33af | 342 | |
fed16f06 UH |
343 | #if 0 |
344 | if (g_double_mode == 1) | |
a1bb33af UH |
345 | analyzer_set_compression(COMPRESSION_DOUBLE); |
346 | else if (g_compression == 1) | |
347 | analyzer_set_compression(COMPRESSION_ENABLE); | |
fed16f06 UH |
348 | else |
349 | #endif | |
350 | analyzer_set_compression(COMPRESSION_NONE); | |
a1bb33af | 351 | |
310e9e9b | 352 | if (devc->cur_samplerate == 0) { |
0ab0cb94 TY |
353 | /* Samplerate hasn't been set. Default to 1MHz. */ |
354 | analyzer_set_freq(1, FREQ_SCALE_MHZ); | |
355 | devc->cur_samplerate = SR_MHZ(1); | |
a1bb33af UH |
356 | } |
357 | ||
7142d6b9 RD |
358 | if (devc->cur_threshold == 0) |
359 | set_voltage_threshold(devc, 1.5); | |
360 | ||
e46b8fb1 | 361 | return SR_OK; |
a1bb33af UH |
362 | } |
363 | ||
6078d2c9 | 364 | static int dev_close(struct sr_dev_inst *sdi) |
a1bb33af | 365 | { |
609bfd75 | 366 | struct sr_usb_dev_inst *usb; |
a1bb33af | 367 | |
609bfd75 | 368 | usb = sdi->conn; |
697785d1 | 369 | |
609bfd75 | 370 | if (!usb->devhdl) |
25a0f108 BV |
371 | return SR_ERR; |
372 | ||
ee4f9bb1 SA |
373 | sr_info("Closing device on %d.%d (logical) / %s (physical) interface %d.", |
374 | usb->bus, usb->address, sdi->connection_id, USB_INTERFACE); | |
609bfd75 BV |
375 | libusb_release_interface(usb->devhdl, USB_INTERFACE); |
376 | libusb_reset_device(usb->devhdl); | |
377 | libusb_close(usb->devhdl); | |
378 | usb->devhdl = NULL; | |
25a0f108 | 379 | sdi->status = SR_ST_INACTIVE; |
697785d1 UH |
380 | |
381 | return SR_OK; | |
a1bb33af UH |
382 | } |
383 | ||
4f840ce9 | 384 | static int cleanup(const struct sr_dev_driver *di) |
a1bb33af | 385 | { |
a6630742 | 386 | return std_dev_clear(di, NULL); |
a1bb33af UH |
387 | } |
388 | ||
584560f1 | 389 | static int config_get(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi, |
53b4680f | 390 | const struct sr_channel_group *cg) |
a1bb33af | 391 | { |
310e9e9b | 392 | struct dev_context *devc; |
dcd438ee | 393 | GVariant *range[2]; |
a1bb33af | 394 | |
53b4680f | 395 | (void)cg; |
8f996b89 | 396 | |
dcd438ee UH |
397 | if (!sdi) |
398 | return SR_ERR_ARG; | |
399 | ||
400 | devc = sdi->priv; | |
401 | ||
584560f1 | 402 | switch (key) { |
123e1313 | 403 | case SR_CONF_SAMPLERATE: |
dcd438ee | 404 | *data = g_variant_new_uint64(devc->cur_samplerate); |
bf43ea23 | 405 | break; |
05f853b5 | 406 | case SR_CONF_CAPTURE_RATIO: |
dcd438ee | 407 | *data = g_variant_new_uint64(devc->capture_ratio); |
05f853b5 | 408 | break; |
7142d6b9 | 409 | case SR_CONF_VOLTAGE_THRESHOLD: |
dcd438ee UH |
410 | range[0] = g_variant_new_double(devc->cur_threshold); |
411 | range[1] = g_variant_new_double(devc->cur_threshold); | |
412 | *data = g_variant_new_tuple(range, 2); | |
67055d4c | 413 | break; |
bf43ea23 | 414 | default: |
bd6fbf62 | 415 | return SR_ERR_NA; |
a1bb33af UH |
416 | } |
417 | ||
626409ab | 418 | return SR_OK; |
a1bb33af UH |
419 | } |
420 | ||
584560f1 | 421 | static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sdi, |
53b4680f | 422 | const struct sr_channel_group *cg) |
a1bb33af | 423 | { |
310e9e9b | 424 | struct dev_context *devc; |
7142d6b9 | 425 | gdouble low, high; |
a1bb33af | 426 | |
53b4680f | 427 | (void)cg; |
8f996b89 | 428 | |
e73ffd42 BV |
429 | if (sdi->status != SR_ST_ACTIVE) |
430 | return SR_ERR_DEV_CLOSED; | |
0ab0cb94 | 431 | |
310e9e9b | 432 | if (!(devc = sdi->priv)) { |
6d116114 | 433 | sr_err("%s: sdi->priv was NULL", __func__); |
bf43ea23 UH |
434 | return SR_ERR_ARG; |
435 | } | |
a1bb33af | 436 | |
584560f1 | 437 | switch (key) { |
1953564a | 438 | case SR_CONF_SAMPLERATE: |
8386096f | 439 | return zp_set_samplerate(devc, g_variant_get_uint64(data)); |
1953564a | 440 | case SR_CONF_LIMIT_SAMPLES: |
8386096f | 441 | return set_limit_samples(devc, g_variant_get_uint64(data)); |
1953564a | 442 | case SR_CONF_CAPTURE_RATIO: |
8386096f | 443 | return set_capture_ratio(devc, g_variant_get_uint64(data)); |
7142d6b9 RD |
444 | case SR_CONF_VOLTAGE_THRESHOLD: |
445 | g_variant_get(data, "(dd)", &low, &high); | |
446 | return set_voltage_threshold(devc, (low + high) / 2.0); | |
fed16f06 | 447 | default: |
bd6fbf62 | 448 | return SR_ERR_NA; |
a1bb33af | 449 | } |
e495a676 UH |
450 | |
451 | return SR_OK; | |
a1bb33af UH |
452 | } |
453 | ||
584560f1 | 454 | static int config_list(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi, |
53b4680f | 455 | const struct sr_channel_group *cg) |
a1c743fc | 456 | { |
17548571 | 457 | struct dev_context *devc; |
f0de2dd0 | 458 | GVariant *gvar, *grange[2]; |
8386096f | 459 | GVariantBuilder gvb; |
7142d6b9 RD |
460 | double v; |
461 | GVariant *range[2]; | |
a1c743fc | 462 | |
53b4680f | 463 | (void)cg; |
8f996b89 | 464 | |
a1c743fc | 465 | switch (key) { |
9a6517d1 | 466 | case SR_CONF_DEVICE_OPTIONS: |
584560f1 | 467 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, |
f254bc4b | 468 | devopts, ARRAY_SIZE(devopts), sizeof(uint32_t)); |
9a6517d1 | 469 | break; |
a1c743fc | 470 | case SR_CONF_SAMPLERATE: |
17548571 | 471 | devc = sdi->priv; |
8386096f | 472 | g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}")); |
17548571 | 473 | if (devc->prof->max_sampling_freq == 100) { |
8386096f BV |
474 | gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), |
475 | samplerates_100, ARRAY_SIZE(samplerates_100), | |
476 | sizeof(uint64_t)); | |
17548571 | 477 | } else if (devc->prof->max_sampling_freq == 200) { |
8386096f BV |
478 | gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), |
479 | samplerates_200, ARRAY_SIZE(samplerates_200), | |
480 | sizeof(uint64_t)); | |
17548571 UH |
481 | } else { |
482 | sr_err("Internal error: Unknown max. samplerate: %d.", | |
483 | devc->prof->max_sampling_freq); | |
484 | return SR_ERR_ARG; | |
485 | } | |
8386096f BV |
486 | g_variant_builder_add(&gvb, "{sv}", "samplerates", gvar); |
487 | *data = g_variant_builder_end(&gvb); | |
a1c743fc | 488 | break; |
28731bab BV |
489 | case SR_CONF_TRIGGER_MATCH: |
490 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32, | |
491 | trigger_matches, ARRAY_SIZE(trigger_matches), | |
492 | sizeof(int32_t)); | |
c50277a6 | 493 | break; |
7142d6b9 RD |
494 | case SR_CONF_VOLTAGE_THRESHOLD: |
495 | g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY); | |
496 | for (v = -6.0; v <= 6.0; v += 0.1) { | |
497 | range[0] = g_variant_new_double(v); | |
498 | range[1] = g_variant_new_double(v); | |
499 | gvar = g_variant_new_tuple(range, 2); | |
500 | g_variant_builder_add_value(&gvb, gvar); | |
501 | } | |
502 | *data = g_variant_builder_end(&gvb); | |
503 | break; | |
f0de2dd0 BV |
504 | case SR_CONF_LIMIT_SAMPLES: |
505 | if (!sdi) | |
506 | return SR_ERR_ARG; | |
507 | devc = sdi->priv; | |
508 | grange[0] = g_variant_new_uint64(0); | |
509 | grange[1] = g_variant_new_uint64(devc->max_sample_depth); | |
510 | *data = g_variant_new_tuple(grange, 2); | |
511 | break; | |
a1c743fc | 512 | default: |
bd6fbf62 | 513 | return SR_ERR_NA; |
a1c743fc BV |
514 | } |
515 | ||
516 | return SR_OK; | |
517 | } | |
518 | ||
6078d2c9 | 519 | static int dev_acquisition_start(const struct sr_dev_inst *sdi, |
3ffb6964 | 520 | void *cb_data) |
a1bb33af | 521 | { |
609bfd75 BV |
522 | struct dev_context *devc; |
523 | struct sr_usb_dev_inst *usb; | |
b9c735a2 | 524 | struct sr_datafeed_packet packet; |
9c939c51 | 525 | struct sr_datafeed_logic logic; |
42ceb777 | 526 | unsigned int samples_read; |
a1bb33af | 527 | int res; |
e495a676 | 528 | unsigned int packet_num, n; |
a1bb33af | 529 | unsigned char *buf; |
42ceb777 RD |
530 | unsigned int status; |
531 | unsigned int stop_address; | |
532 | unsigned int now_address; | |
533 | unsigned int trigger_address; | |
534 | unsigned int trigger_offset; | |
535 | unsigned int triggerbar; | |
536 | unsigned int ramsize_trigger; | |
537 | unsigned int memory_size; | |
538 | unsigned int valid_samples; | |
539 | unsigned int discard; | |
540 | int trigger_now; | |
a1bb33af | 541 | |
e73ffd42 BV |
542 | if (sdi->status != SR_ST_ACTIVE) |
543 | return SR_ERR_DEV_CLOSED; | |
544 | ||
310e9e9b | 545 | if (!(devc = sdi->priv)) { |
6d116114 | 546 | sr_err("%s: sdi->priv was NULL", __func__); |
bf43ea23 UH |
547 | return SR_ERR_ARG; |
548 | } | |
a1bb33af | 549 | |
28731bab BV |
550 | if (analyzer_add_triggers(sdi) != SR_OK) { |
551 | sr_err("Failed to configure triggers."); | |
014359e3 BV |
552 | return SR_ERR; |
553 | } | |
554 | ||
609bfd75 BV |
555 | usb = sdi->conn; |
556 | ||
0ab0cb94 TY |
557 | set_triggerbar(devc); |
558 | ||
e495a676 | 559 | /* Push configured settings to device. */ |
609bfd75 | 560 | analyzer_configure(usb->devhdl); |
a143e4e5 | 561 | |
609bfd75 | 562 | analyzer_start(usb->devhdl); |
6d116114 | 563 | sr_info("Waiting for data."); |
609bfd75 | 564 | analyzer_wait_data(usb->devhdl); |
a1bb33af | 565 | |
42ceb777 RD |
566 | status = analyzer_read_status(usb->devhdl); |
567 | stop_address = analyzer_get_stop_address(usb->devhdl); | |
568 | now_address = analyzer_get_now_address(usb->devhdl); | |
569 | trigger_address = analyzer_get_trigger_address(usb->devhdl); | |
570 | ||
571 | triggerbar = analyzer_get_triggerbar_address(); | |
572 | ramsize_trigger = analyzer_get_ramsize_trigger_address(); | |
573 | ||
574 | n = get_memory_size(devc->memory_size); | |
575 | memory_size = n / 4; | |
576 | ||
577 | sr_info("Status = 0x%x.", status); | |
578 | sr_info("Stop address = 0x%x.", stop_address); | |
579 | sr_info("Now address = 0x%x.", now_address); | |
580 | sr_info("Trigger address = 0x%x.", trigger_address); | |
581 | sr_info("Triggerbar address = 0x%x.", triggerbar); | |
582 | sr_info("Ramsize trigger = 0x%x.", ramsize_trigger); | |
583 | sr_info("Memory size = 0x%x.", memory_size); | |
a1bb33af | 584 | |
4afdfd46 | 585 | /* Send header packet to the session bus. */ |
29a27196 | 586 | std_session_send_df_header(cb_data, LOG_PREFIX); |
f366e86c | 587 | |
42ceb777 RD |
588 | /* Check for empty capture */ |
589 | if ((status & STATUS_READY) && !stop_address) { | |
590 | packet.type = SR_DF_END; | |
591 | sr_session_send(cb_data, &packet); | |
592 | return SR_OK; | |
593 | } | |
594 | ||
a95f142e | 595 | buf = g_malloc(PACKET_SIZE); |
b53738ba | 596 | |
42ceb777 RD |
597 | /* Check if the trigger is in the samples we are throwing away */ |
598 | trigger_now = now_address == trigger_address || | |
599 | ((now_address + 1) % memory_size) == trigger_address; | |
600 | ||
601 | /* | |
602 | * STATUS_READY doesn't clear until now_address advances past | |
603 | * addr 0, but for our logic, clear it in that case | |
604 | */ | |
605 | if (!now_address) | |
606 | status &= ~STATUS_READY; | |
607 | ||
609bfd75 | 608 | analyzer_read_start(usb->devhdl); |
42ceb777 RD |
609 | |
610 | /* Calculate how much data to discard */ | |
611 | discard = 0; | |
612 | if (status & STATUS_READY) { | |
613 | /* | |
614 | * We haven't wrapped around, we need to throw away data from | |
615 | * our current position to the end of the buffer. | |
616 | * Additionally, the first two samples captured are always | |
617 | * bogus. | |
618 | */ | |
619 | discard += memory_size - now_address + 2; | |
620 | now_address = 2; | |
621 | } | |
622 | ||
623 | /* If we have more samples than we need, discard them */ | |
624 | valid_samples = (stop_address - now_address) % memory_size; | |
625 | if (valid_samples > ramsize_trigger + triggerbar) { | |
626 | discard += valid_samples - (ramsize_trigger + triggerbar); | |
627 | now_address += valid_samples - (ramsize_trigger + triggerbar); | |
628 | } | |
629 | ||
630 | sr_info("Need to discard %d samples.", discard); | |
631 | ||
632 | /* Calculate how far in the trigger is */ | |
633 | if (trigger_now) | |
634 | trigger_offset = 0; | |
635 | else | |
636 | trigger_offset = (trigger_address - now_address) % memory_size; | |
637 | ||
638 | /* Recalculate the number of samples available */ | |
639 | valid_samples = (stop_address - now_address) % memory_size; | |
640 | ||
fed16f06 | 641 | /* Send the incoming transfer to the session bus. */ |
42ceb777 | 642 | samples_read = 0; |
0ab0cb94 | 643 | for (packet_num = 0; packet_num < n / PACKET_SIZE; packet_num++) { |
42ceb777 RD |
644 | unsigned int len; |
645 | unsigned int buf_offset; | |
646 | ||
609bfd75 | 647 | res = analyzer_read_data(usb->devhdl, buf, PACKET_SIZE); |
6d116114 | 648 | sr_info("Tried to read %d bytes, actually read %d bytes.", |
b08024a8 | 649 | PACKET_SIZE, res); |
a1bb33af | 650 | |
42ceb777 RD |
651 | if (discard >= PACKET_SIZE / 4) { |
652 | discard -= PACKET_SIZE / 4; | |
653 | continue; | |
654 | } | |
655 | ||
656 | len = PACKET_SIZE - discard * 4; | |
657 | buf_offset = discard * 4; | |
658 | discard = 0; | |
659 | ||
660 | /* Check if we've read all the samples */ | |
661 | if (samples_read + len / 4 >= valid_samples) | |
662 | len = (valid_samples - samples_read) * 4; | |
663 | if (!len) | |
664 | break; | |
665 | ||
666 | if (samples_read < trigger_offset && | |
667 | samples_read + len / 4 > trigger_offset) { | |
668 | /* Send out samples remaining before trigger */ | |
669 | packet.type = SR_DF_LOGIC; | |
670 | packet.payload = &logic; | |
671 | logic.length = (trigger_offset - samples_read) * 4; | |
672 | logic.unitsize = 4; | |
673 | logic.data = buf + buf_offset; | |
674 | sr_session_send(cb_data, &packet); | |
675 | len -= logic.length; | |
676 | samples_read += logic.length / 4; | |
677 | buf_offset += logic.length; | |
678 | } | |
679 | ||
680 | if (samples_read == trigger_offset) { | |
681 | /* Send out trigger */ | |
682 | packet.type = SR_DF_TRIGGER; | |
683 | packet.payload = NULL; | |
684 | sr_session_send(cb_data, &packet); | |
685 | } | |
686 | ||
687 | /* Send out data (or data after trigger) */ | |
5a2326a7 | 688 | packet.type = SR_DF_LOGIC; |
9c939c51 | 689 | packet.payload = &logic; |
42ceb777 | 690 | logic.length = len; |
9c939c51 | 691 | logic.unitsize = 4; |
42ceb777 | 692 | logic.data = buf + buf_offset; |
3cd3a20b | 693 | sr_session_send(cb_data, &packet); |
42ceb777 | 694 | samples_read += len / 4; |
a1bb33af | 695 | } |
609bfd75 | 696 | analyzer_read_stop(usb->devhdl); |
a1bb33af UH |
697 | g_free(buf); |
698 | ||
5a2326a7 | 699 | packet.type = SR_DF_END; |
3cd3a20b | 700 | sr_session_send(cb_data, &packet); |
a1bb33af | 701 | |
e46b8fb1 | 702 | return SR_OK; |
a1bb33af UH |
703 | } |
704 | ||
3cd3a20b | 705 | /* TODO: This stops acquisition on ALL devices, ignoring dev_index. */ |
6078d2c9 | 706 | static int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data) |
a1bb33af | 707 | { |
310e9e9b | 708 | struct dev_context *devc; |
609bfd75 BV |
709 | struct sr_usb_dev_inst *usb; |
710 | struct sr_datafeed_packet packet; | |
a1bb33af | 711 | |
5a2326a7 | 712 | packet.type = SR_DF_END; |
3cd3a20b | 713 | sr_session_send(cb_data, &packet); |
a1bb33af | 714 | |
310e9e9b | 715 | if (!(devc = sdi->priv)) { |
6d116114 | 716 | sr_err("%s: sdi->priv was NULL", __func__); |
3010f21c | 717 | return SR_ERR_BUG; |
69890f73 | 718 | } |
a1bb33af | 719 | |
609bfd75 BV |
720 | usb = sdi->conn; |
721 | analyzer_reset(usb->devhdl); | |
fed16f06 | 722 | /* TODO: Need to cancel and free any queued up transfers. */ |
3010f21c UH |
723 | |
724 | return SR_OK; | |
a1bb33af UH |
725 | } |
726 | ||
c09f0b57 | 727 | SR_PRIV struct sr_dev_driver zeroplus_logic_cube_driver_info = { |
e519ba86 | 728 | .name = "zeroplus-logic-cube", |
8fdecced | 729 | .longname = "ZEROPLUS Logic Cube LAP-C series", |
e519ba86 | 730 | .api_version = 1, |
6078d2c9 UH |
731 | .init = init, |
732 | .cleanup = cleanup, | |
733 | .scan = scan, | |
734 | .dev_list = dev_list, | |
a6630742 | 735 | .dev_clear = NULL, |
035a1078 BV |
736 | .config_get = config_get, |
737 | .config_set = config_set, | |
a1c743fc | 738 | .config_list = config_list, |
6078d2c9 UH |
739 | .dev_open = dev_open, |
740 | .dev_close = dev_close, | |
741 | .dev_acquisition_start = dev_acquisition_start, | |
742 | .dev_acquisition_stop = dev_acquisition_stop, | |
310e9e9b | 743 | .priv = NULL, |
a1bb33af | 744 | }; |